- Home /
- 2010-2015 Camaro Parts & Accessories /
- 2010-2015 Camaro Performance Products /
- 2010-2015 Camaro Elite Engineering PCV Oil Catch Can
2010-2015 Camaro PCV Oil Catch Can
Ultimate Function:
The Elite Engineering PCV Oil Catch Can is designed to effectively separate oil from the crankcase vapors, thereby eliminating all negative effects of excessive intake system oil contamination. Our Catch Can has been engineered to remove the oil vapor before it has a chance to contaminate your intake system.
Purpose of your Stock PCV System:
The PCV (Positive Crankcase Ventilation) system is designed to regulate and remove fumes from the engine crankcase and to alleviate crankcase pressure which could cause oil leaks or seal damage. The PCV system routes crankcase fumes into the intake manifold where they can be burned to eliminate harmful emissions into the atmosphere. The PCV valve controls the amount of crankcase flow volume depending on the engine's load. With large throttle openings (high engine loads), the more blow-by gases are produced, and the more the PCV system flows oil vapor in to the intake manifold. The PCV valve also functions as a check valve to prevent intake manifold flow from reversing back into the crankcase when there is a backfire, or during periods of high manifold pressure (boost) during forced induction by turbocharger or supercharger.
Negative Effects of your Stock PCV System:
- Throttle body and/or MAFS (Mass Air Flow Sensor) malfunction or failure.
- Air filter, intercooler (if equipped) and intake ducting contamination if oil pools and run back out the intake system after engine shutdown.
- Reduced octane of the air/fuel mixture, which can cause detonation and the ECM (Engine Control Module) to retard timing, thereby reducing engine power.
- Excessive carbon build-up on valves, piston crowns, combustion chambers and spark plugs. This also increases the chance of detonation and power loss.
Increased emissions & possible contamination of catalytic converters and oxygen sensors.
Many Camaro owners with LSX engines can testify to the amount of oil residue that can accumulate inside the intake manifold, throttle body, intake track and even the air filter during aggressive driving conditions.
Solution: Install the E2 Elite Engineering PCV Oil Catch Can
Not all Catch Cans are created equally! Often Imitated, never duplicated. Most Catch Cans on the market are just comprised of an empty container with 2 ports. While that simple design may trap a few oil droplets, our Catch Can is designed to condense the oil vapor and trap the oil inside the container.
Our test proven design incorporates a stainless steel mesh and screening mechanism that acts like a maze to collect and condense the oil vapor. Once the oil vapors condense into liquid droplets, it falls to the bottom of the can. In addition, the top assembly is specially designed to keep any liquid from climbing out the exit hole during aggressive driving conditions. Stored oil volume is approximately 8 ounces. You will be amazed by how much oil our Catch Can will catch! Don't settle for an inferior competitor's product. Insist on Elite Engineering's Catch Can!
Premium Construction:
The Elite Engineering PCV Oil Catch Can is constructed of the finest materials inside and out. High-performance car owners insist on the best products that offer unsurpassed function as well as impressive visual enhancement. Our Catch Can does both! Our exclusive design incorporates optimum function and the finest materials, construction and finish for maximum dependability.
The 2.6" diameter by 6.0" long body is machined from billet 6061-T6 aluminum alloy, and then anodized in a variety of colors for a striking look. The internal condensing screen is stainless steel encased inside an aluminum alloy housing designed for low flow restriction. The housing can be disassembled for screen inspection, cleaning or replacement if needed. The inlet and outlet hose fittings are brass, and threaded into the body and sealed with Teflon tape. Supplied hoses are fuel and oil vapor compatible (SAE 30R7 rated). The bottom catch can reservoir screws onto the top of the unit and is sealed with a built-in O-ring. Inspection and cleaning is easy by simply removing the bottom of the unit without disturbing the mounting system or hoses.
In keeping with our high-quality standards, all supplied mounting hardware and screws are stainless steel. The supplied custom machined bracket is aluminum and is attached to the passenger side engine head. Click here, take a look at our instructions page to see how simple the installation is.
Each Catch Can kit includes everything you need to install the system. Basic mechanical skills and common hand tools are the only things required.
Kit Includes:
- Catch Can assembly beautifully anodized in a choice of available colors, complete with 3/8" barbed inlet/outlet hose fittings.
- Custom machined mounting
- Stainless steel mounting hardware.
- 24 inches of 3/8" ID fuel and oil vapor compatible hose.
- Black zinc plated hose clamps.
Bottom line: Excessive amounts of oil vapor in the intake manifold is detrimental to your engine!
APPLICATION: 2010, 2011, 2012, 2013, 2014, 2015 Camaro
Write Your Own Review
Related Products
-
Corvette C8 Parts
- Corvette C8 Accessories
- Corvette C8 Apparel
- Corvette C8 Brakes
- Corvette C8 Car Care Products
- Corvette C8 Car Covers
- Corvette C8 Carbon Fiber
- Corvette C8 Exhaust
- Corvette C8 Lloyd Floor Mats
- Corvette C8 Home & Garage Gear
- Corvette C8 Interior Parts
- Corvette C8 Maintenance
- Corvette C8 Performance Parts
- Corvette C8 Wheels
- Corvette C8 Engine Dress Up
- Corvette C8 Exterior Parts
- Corvette C8 Stingray Custom Painted Parts
-
Corvette C7 Parts
- Corvette C7 Accessories
- Corvette C7 Apparel
- Corvette C7 Brakes
- Corvette C7 Car Care Products
- Corvette C7 Car Covers
- Corvette C7 Carbon Fiber
- Corvette C7 Exhaust
- Corvette C7 Exterior Parts
- Corvette C7 Lloyd Floor Mats
- Corvette C7 Home & Garage Gear
- Corvette C7 Interior Parts
- Corvette C7 Maintenance
- Corvette C7 Performance Parts
- Corvette C7 Under Hood Dress Up
- Corvette C7 Wheels
- Corvette C7 Hot New Products
-
Corvette C6 Parts
- Corvette C6 Wheels
- Corvette C6 Accessories
- Corvette C6 Apparel
- Corvette C6 Brakes
- Corvette C6 Car Care Products
- Corvette C6 Car Covers
- Corvette C6 Engine Dress Up
- Corvette C6 Engine Parts
- Corvette C6 Exhaust
- Corvette C6 Exterior
- Corvette C6 Floor Mats
- Corvette C6 Intake
- Corvette C6 Interior
- Corvette C6 Shift Knobs
- Corvette C6 Suspension Parts
- Corvette C6 Transmission Parts
- Corvette C6 Tuners-Miscellaneous
- Corvette C6 LED And Lighting
- 1953-1996 Corvette Restoration Parts
-
2016-2023 Camaro Parts and Accessories
- 2016-2023 Camaro Air Intake Systems
- 2016-2023 Camaro Apparel
- 2016-2023 Camaro Brakes
- 2016-2023 Camaro Car Care Products
- 2016-2023 Camaro Car Covers
- 2016-2023 Camaro Engine Bay Dress-Up
- 2016-2023 Camaro Exhaust Systems
- 2016-2023 Camaro Exterior Parts
- 2016-2023 Camaro Floor Mats
- 2016-2023 Camaro Interior Parts
- 2016-2023 Camaro Misc. Accessories
- 2016-2023 Camaro Performance Parts
- 2016-2023 Camaro Suspension
- 2016-2023 Camaro Wheels and Accessories
-
2010-2015 Camaro Parts & Accessories
- 2010-2015 Camaro Air Intake Systems
- 2010-2015 Camaro Apparel
- 2010-2015 Camaro Brakes
- 2010-2015 Camaro Car Care Products
- 2010-2015 Camaro Car Covers
- 2010-2015 Camaro Engine Bay Dress-Up
- 2010-2015 Camaro Exhaust
- 2010-2015 Camaro Exterior Parts
- 2010-2015 Camaro Floor Mats
- 2010-2015 Camaro Headers
- 2010-2015 Camaro Interior Parts
- 2010-2015 Camaro Misc. Accessories
- 2010-2015 Camaro Performance Products
- 2010-2015 Camaro Suspension
- 2010-2015 Camaro Wheels
- 2010-2015 Seibon Camaro Carbon Fiber
-
Corvette C5 Parts
- Corvette C5 Accessories
- Corvette C5 Body Parts
- Corvette C5 Brakes
- Corvette C5 Car Care Products
- Corvette C5 Car Covers
- Corvette C5 Engine Dress Up
- Corvette C5 Engine
- Corvette C5 Exhaust
- Corvette C5 Exterior
- Corvette C5 Floor Mats
- Corvette C5 Exhaust Header Systems
- Corvette C5 Intake
- Corvette C5 Interior
- Corvette C5 Miscellaneous Parts
- Corvette C5 Nitrous Kits
- Corvette C5 Shift Knobs
- Corvette C5 Suspension and Steering
- Corvette C5 Wheels
- Corvette C5 Replacement Carpet Packages
-
2015-2019 6th Generation Ford Mustang
- 2015-2019 Ford Mustang Car Covers
- 2015-2019 Ford Mustang Custom Painted
- 2015-2019 Ford Mustang Emblems, Decal
- 2015-2019 Ford Mustang Engine Dress Up
- 2015-2019 Ford Mustang Exhaust System
-
2015-2019 Ford Mustang Exterior Parts
- 2015-2019 Ford Mustang Grilles
- 2015-2019 Ford Mustang License Plate Frames
- 2015-2019 Ford Mustang Lighting & Blackouts
- 2015-2019 Ford Mustang Misc Exterior Accessories
- 2015-2019 Ford Mustang Spoilers and Splitters
- 2015-2019 Ford Mustang Stripes and Decals
- 2015-2019 Ford Mustang Carbon Fiber Body Parts
- 2015-2019 Ford Mustang Interior Parts
- 2015-2019 Ford Mustang License Plate
- 2015-2019 Ford Mustang Light Blackout
- 2015-2019 Ford Mustang Lloyd Floor Mats
- 2015-2019 Ford Mustang Performance
- 2015-2019 Ford Mustang Wheels
- 2015-2019 Ford Racing Parts
- 2015-2019 Ford Mustang Brakes
-
2009-2023 Dodge Challenger Parts
- 2009-2023 Challenger Car Covers
- 2009-2023 Challenger Cold Air Intake
- 2009-2023 Challenger Engine Dress-Up
- 2009-2023 Challenger Interior Parts
- 2009-2023 Challenger Suspension Parts
- 2009-2023 Challenger Wheels
- 2009-2023 Dodge Challenger Brakes
- 2009-2023 Dodge Challenger Exhaust Systems
- 2009-2023 Dodge Challenger Exterior Parts
- 2009-2023 Dodge Challenger Floor Mats
- 2009-2023 Dodge Challenger Headers
- 2009-2023 Dodge Challenger Tuners
- 2009-2023 Challenger Carbon Fiber
- 2010-2014 Ford Raptor Parts
- 2017-Current Ford Raptor
- Beltronics Radar Detectors
- Cadillac ATS
- Corvette America
- 2015-2023 Hellcat Challenger Parts
- MBRP Exhaust
- S&B Filters
- SPAL Fans
- Teraflex
- Allstar Performance
- Baja Designs
- 3D MAXpider
- Fab Fours
- XDP
- Volunteer Vettes
- Diode Dynamics
- Oracle
- Du Ha
- aFe Power
- Diamond Eye
- APR Performance
- Rigid Industries
All Manufacturers
- ACI
- Adjure
- Advanced Composite Specialties
- aFe Power/Pfadt
- Akrapovic Exhaust
- Altec
- American Brothers Design
- American Car Craft
- American Racing Headers
- Anderson Composites
- AP Racing
- APR Performance
- Arkon
- Auto Care Products
- Auto Custom Carpets
- Auto Etc Neon
- Baer
- Bassani
- BB Exhaust
- BBK
- Beltronics
- Blendmount
- BM
- BMR
- Borla
- Brembo
- California Car Cover
- Callaway Cars Inc
- Caspers Electronics
- CBD
- CEI
- ChargerConnection
- Cobb Tuning
- Cold Air Inductions Inc
- Corsa
- Corvette America
- Corvette Eyewear
- Covercraft
- CoverKing
- CPX Foilers
- CS Vettes
- CTEK
- Custom LED Service
- Dashtronix
- DBA Disc Brakes
- DefenderWorx
- Diablo Sport
- Diode Dynamics
- DSVette
- Dynamat
- East Coast Supercharging
- Edelbrock
- EED
- Eibach
- Elite
- Elite Engineering
- Empire Vehicle Accessories
- Escort Radar Detectors
- Extreme Dimensions
- Factory Reproductions
- FAST Peformance
- Fidanza
- Flowmaster
- Forgeline Wheels
- GHL Motorsports
- GM
- Green Air Filters
- Green Light
- Halltech
- Hawk Performance
- Heat Metal Corp.
- HiTech
- Hotchkis
- Hurst
- Husky Liners
- Hyperco
- IForged Performance Alloys
- Innovative Vehicle Solutions
- JLT
- Kirban Performance
- KN Filters
- Kooks Custom Headers
- Koolmat
- Lewis Five Motorsports
- LG Motorsports
- Lingenfelter
- Lloyd Mats
- LSD
- MagnaFlow
- Magnuson
- Melrose Tops
- Metro Vacuum
- MGP
- Mine's
- Momo Italy
- MRT
- MSD
- MTI
- NOCO Genius Battery Chargers
- Norscot
- NOS
- OER
- Password JDM
- Performance Choice
- PFADT Race Engineering
- Pioneer
- Power Slot
- R2C Performance Products
- Race Ramps
- RaceMesh
- Ralph White Merchandising
- RAM Clutches
- Retro USA
- Roto-Fab
- Roush Performance
- RPI Designs
- Russell
- SB Filters
- SCX
- Seibon Carbon
- SLP
- Southern Car Parts
- Southern Car Parts
- Spal
- SpeedLingerie
- Stainless Works
- Starcraft
- StarCraft
- Stillen
- Superior Dash
- Taylor
- TeraFlex
- TiTek
- TopDown
- Trufiber
- TSW Wheels
- UltraRacing
- Vararam
- Vertical Doors Inc.
- Vette Net
- VIS Racing Sports
- Volunteer Vettes
- WCC Forged
- Webelectric
- West Coast Corvette
- Wilwood Brakes
- Wow Thats It's
- Xtreme Diesel Performance
- Zippo
- Zoom Performance
Corvette Information
- Brembo GT Brake Upgrade Questions
- Camaro Havoc Body Kit Installation Instructions
- Choosing a Limited Slip Differential
- Corvette C5 and C6 Brake Pad Replacement
- Corvette C5 Common Problems
- Corvette C5 DIC Codes
- Corvette C5 Facts 00-04
- Corvette C5 Facts 97-99
- Corvette C5 Intake Installation
- Corvette C6 DIY, Differential Oil Change
- Corvette C6 F55 Console Installation
- Corvette C6 Facts 05-07
- Corvette C6 Full Length Spoiler Install
- Corvette C6 HID Foglights Mod/DIY
- Corvette C6 Model Year Changes
- Corvette C6 Nav System Mod
- Corvette C6 RPO Codes
- Corvette C6 VIN Decoder
- Corvette C6 Z06 Battery Charger Installation
- Corvette C6 Z06 Brembo Brake Installation
- Corvette C6 Z06 Exhaust Sound Comparison
- Corvette C6 ZR1 Blue Devil Information
- Corvette C7 Information
- Corvette Clubs
- Corvette Information for the C6
- Corvette Paint Codes
- Corvettes For Sale
- Coupon Codes
- How to Change your Oil-2010 Camaro
- Index
- Southern Car Parts Banners
- Shipping & Returns
- Privacy Notice
- Conditions of Use
- 2008 Corvette C6 Pricing
- 2009 Corvette C6 Information
- 2009 Corvette C6 Pricing
- 2014 Corvette C7 Stingray
- Akrapovic Exhaust Pictures
- Aluminum Race Pedals Installation Instructions
- Gift Voucher FAQ
- Contact Us
- Site Map
- Package Tracking
- Corvette Resources
- Corvette Floor Mat Pictures