Block-It Evolution Mustang Car Cover

From Covercraft, the Mustang Block-It Evolution Car Cover      

Are you looking for a high-quality and affordable car-cover for your Mustang? The Block-It Evolution might just be perfect for you then. Using Block-It Fabric technology, this car cover works well for both Indoor and Outdoor uses. With fantastic breathability, this Mustang car cover is also good at water resistance, UV resistance, and Dust Protection. If your Mustang is always Outdoors in more extreme elements, then the CoverCraft Block-It Evolution is the best choice for you, but if your vehicle spends time both indoors and out, then the Block-It Car Cover line is a fantastic choice. Great, versatile, protection at an affordable price!

Block-It fabrics stop water from entering, but breathe very well incase there is any moisture inside of the cover to help allow it to evaporate. This fantastic material is extremely versatile, and allows for great breathability to be coupled with protection. This cover works very well as an outdoor cover in non-extreme conditions, and also fantastic indoors where it protects your vehicle from dust. Water-resistant, breathable, and protective with soft inner lining.

• Naturally Moisture Resistant - Acid rain, industrial pollutants, tree sap and bird droppings will not harm the fabric.
• Dries Easily - Moisture is not absorbed by the fabric fibers.
• Breathable - Allows air to circulate through the fabric.
• Dust / Pollution Barrier - The two middle layers of melt-blown fabric act as a filtration barrier against most airborne pollutants.
• Impact Absorption - 4-layer thickness absorbs impacts better than any other vehicle cover fabric to help protect the finish from nicks, dings, dents and scratches.

The Block-It Evolution Cover comes in Blue, Grey, and Tan.

The Block-It Evolution Car Cover comes with a 4 year warranty.

Block-It Evolution Car Cover Cleaning Instructions

For general cleaning, spray off the cover with the water hose while it is on the vehicle. Allow it to air dry. To spot clean stains, spray the spot with Simple Green All Purpose Cleaner. Agitate the spot lightly with a sponge and rinse.

It’s a good idea to wash the entire cover periodically, though the exact frequency depends on how often you use the cover and in what conditions. Put the cover in a large commercial washer without an agitator. Pour a 1/4 cup of Simple Green into the washer and allow it to fill. Then put the cover in. Run the cover through two rinse cycles to be sure all the cleaner is removed. Air dry. (WeatherShield and FormFit covers can be dried on regular heat in a dryer. Polycotton and flannel covers can be dried on low heat.)

You may also clean the inside of the cover by turning it inside out on the vehicle. Mix one ounce of Simple Green per quart of warm water and spray it onto the cover. Rinse thoroughly until no suds are visible. Air dry.
 

Free Ground shipping in the lower 48 States

Choose your Specific Vehicle Below: