Akrapovic Titanium Evolution BMW 1M Exhaust
Titanium Complete Akrapovic Evolution Exhaust for the BMW 1M
The Akrapovic Evolution exhaust system for the BMW 1M consists of the Akrapovic Mufflers (Slip On System) made entirely of light-weight, aircraft grade titanium and the Titantium link pipes with resonators that complete this amazing performance exhaust kit. The entire system is made from Titanium and reduces the overall weight when compared to stock by an incredible amount! This exhaust is certain to give your new and exciting BMW 1M an improved, more aggressive exhaust tone while also improving its HP and Torque numbers across the entire RPM range. Ultimately, these bonuses will make for a lighter, quicker, and more intimidating 1M than any other on the road.
Power increases are realized from as low as 2,500 rpm all the way to redline, and the majority of these gains occur between 3,000 and 6,500 rpm with a proper exhaust, such as this one. This is a substantial increase over a very wide rpm range, and so it increases responsiveness during all phases of driving. These sorts of increases are what has become common place for the industry leading Akrapovic, whose dedication to the highest quality exhausts has made them one of the world's finest. With Akrapovic, you're getting the very best available for your car.
At Akrapovic they have developed several different configurations to suit all tuning applications. The basis of all the configurations is our Akrapovic Titanium Slip-On system. Utilizing a single muffler arrangement, the Slip-On exhaust is designed to be modular. In its basic mode, all exhaust gases flow through the main body of the muffler, giving you a deeper rumble of an exhaust note compared to stock without any drone. In Europe this system meets TÜV standards for noise. However, the muffler system is built in such a way that by replacing a blocking plate with our Wireless Kit valve system the driver is able to noticeably increase the volume of the exhaust at the press of a button. Once activated, the majority of the exhaust gases route through the muffler bypass outlets.
Building on the modular theme, the Akrapovic Evolution System includes the Slip-On and then adds titanium link pipes to it with resonators that run from the stock downpipe back. These link pipes feature larger-than-stock-diameter tubing and cast titanium flanges that are made at our in-house foundry for a perfect fit. In addition, the secondary catalysts are removed, further decreasing backpressure and weight while at the same time deepening the exhaust tone and increasing power output. No ECU reprogramming is required in this configuration. The check engine light will not be triggered. The Wireless Kit mentioned in the Slip-On description can also be used with the Evolution System.
For the ultimate in weight reduction, tuning potential, and racing sound, Akrapovic offers stainless steel, catless downpipes. When used in conjunction with the Evolution System, this is virtually the same setup used on the 1M Moto GP Safety Car. The high-flow downpipes do require ECU reprogramming to eliminate the check engine light and for peak power output. They are only for the dedicated track day car or hardcore enthusiasts.
One of the most important aspects of driving a high performance European sports car is the way it sounds. At Akrapovic countless hours are spent making sure the systems they produce have unmatched acoustics. Simply making the exhaust louder than stock is not the answer. Designing a system that delivers a deep, rich growl at cruising speeds while also allowing the driver to enjoy an aggressive roar when driven hard is our goal. All of this is done without introducing any droning or harshness that could ruin the driving experience. In short, Akrapovic makes sure the car sounds the way it was always meant to.
All 1M systems are available with either titanium or carbon fiber tail pipes. Also available are optional, improved, Stainless Steel downpipes which help open up the exhaust for even greater air flow and higher performance numbers. Akrapovic offers a complete exhaust valve control switch for this system as well that allows the driver to take complete control over the bi-modal exhaust valves, regardless of their RPMs. Please select your exhaust options from the drop-down menus below.
This system is still finishing production and will be officially available in Early October of 2011. The first production run is limited, so the sooner you order the more guaranteed you are to receive one of the first systems produced. We here at Southern Car Parts are proud to be among the first in line to receive these brand new, 1M Akrapovic exhaust systems. There will be a limited number of Akrapovic systems produced. We are taking pre orders now for this amazing exhaust for the new 1M.
| Optional Down Pipes: |
|
| Tip Style: |
|
| Wireless Exhaust Control Switch: |
|
|
