Camaro V6 Gran Turismo Brembo Front Brake Kit

For the 2010+ V6 Camaro

No one makes a higher quality brakes for your new 2010+ V6 Camaro than Brembo.  Each Brembo Big Brake kit is designed in the US and validated by Brembo – Italy for proper bias and performance. These Brembo GT kits are truly the top of the line for your Camaro V6 braking performance, you simply can't go wrong with them!

The Brembo Gran Turismo kits for the 2010+ Camaro include:

Six piston monobloc calipers with integral bridge for outstanding stiffness.
Zinc plated high carbon disc, drilled or slotted, directionally vaned.
TUV, DOT approved floating hardware.
Aircraft aluminum lightweight hats.
High performance pads made exclusively for Brembo by Ferodo.
Custom Goodridge stainless braided brake lines with lifetime warranty.
Complete installation manual and hardware. 

Brembo GT Kit Benefits
The Brembo GT (Gran Turismo ) line is dedicated to the most demanding customers. This braking system originates from the Racing components, consisting of a ventilated, integral or composite disc, available drilled or slotted, 4, 6 and 8 piston aluminium calipers, a complete set of high performance brake pads, metal braid tubes and high quality small parts.
1. High Performance Friction Material: Aggressive pads that provide the
highest level of performance.
2. Cross-Drilled or Slotted Discs: Clears gasses, cleans pads for better
“bite”.
3. Mounting Brackets and Assembly Hardware: Aircraft quality included
and pre-torqued specifications.
4. Stainless Steel Braided Brake Line: DOT/TÜV approved.
5. “Floating” Disc Mounting System with Billet Aluminium Hat: Reduce “Unsprung Weight” for better handling and reduces heat-related stress; increases brake performance and pedal feel.
6. Four, Six or Eight Piston Cast Aluminium Calipers: Provide maximum braking force without the flex of sliding calipers.
Comparison between floating 2-piece and 1-piece discs The floating disc mounting system, due to the aluminium alloy hat, reduces the “unsprung” weight for better handling and reduces heat-related stress: the mounting system is designed to allow a specific amount of float in both radial and axial directions.

Brembo has engineered special springs that are used on every other fastener in order to slightly preload the assembly. This has been done to prevent excessive noise from the system during street use. The one-piece discs (both for the Sport and GT lines) are specifically designed in the goose-neck area to minimize thermal distortion and thus disc warping under severe use conditions. The one-piece discs provide excellent stopping power ranging from everyday traffic conditions to more spirited high performance driving, and fit into the budget of any enthusiast.


Brembo Camaro Front Setup
Six Piston Brembo Calipers (Black, Red, Yellow, or Silver)
Size of your choosing, 2-Piece Rotors (Choice of Drilled or Slotted)

  ->Not all rotors sizes fit behind OEM wheels. Make sure you know what size wheels you will be using before choosing your rotor size. As a "general" rule, the rotor size should be no more than 4" below what your wheel size is. For example, 19" Wheels, rotor size should not be bigger than 15" or 380mm.