Camaro Performance Racing Shifter

MTI Racing Performance Six-Shooter Shifter for the 2010+ Camaro V8

MTI Racing has partnered with manufacturing giant UUC Motorwerks to produce the ultimate shifter. Their Six Shooter shifter addresses each and every "compromise" of the stock shifter system.  The enhanced precision, direct feel, and super-smooth action cannot be duplicated by any means other than precision shifter components, and the MTI Six Shooter Shifter is as precise as they come. If you want to race your Camaro, or just simply having a responsive and precise feel while driving it, this Performance shifter is perfect for you.

The MTI Racing Six Shooter Shifter is engineered with better materials, shorter throw, and a better overall feel than its competitors. Now you can get rid of that stock numb, rubbery factory shifter and replace it with the Six Shooter Shifter and confidently go through the gears with quick, sharp, precision. The throw is reduced by approximately 25% and complimented by a HUGE improvement in feel, so much so, that it feels like 1000% improvement.

The stock OEM shifter is made using a 4-pc shaft that is bushed with rubber, a pressed-on ball joint, and a welded-on pivot that holds a shaft bearing attached to rubber linkage bushings. The new MTI Racing Six Shooter Shifter is made of high quality stainless steel with a 1-pc ball machined directly into the lower stick, and a roller bearing at the base shift rod link. The kit also replaces the stock rubber bushings with durable delrin composite bushings, increasing the overall strength and life of the shifter assembly. The Six Shooter Shifter requires little to no extra effort when shifting, and instills confidence with its solid structural feel. For an improved driving feel and shifting performance, this is the best shifter for you.

The MTI Racing Six Shooter shifter kit is not an entire shifter housing replacement.

The kit includes all the components to convert the shifter assembly and its internal hardware with the highest quality components, while retaining the factory housing. Installation of the shifter requires the transmission to be lowered slightly to remove and install the shifter assembly. The new shifter is designed to use the stock shift knob or an aftermarket knob. The throw reduction is around 25%. We have tested over and over different throw reductions, and we felt that the final version provided the best overall confidence in shifting. Made in the USA.

This is the #1 upgrade for the 2010+ Camaro.