Corsa Exhaust Systems


Corsa Exhaust Systems

Corsa Exhaust Systems

CORSA uses its patented Reflective Sound Cancellation (RSC) technology to eliminate low frequency resonance while minimizing backpressure. Sound waves are reflected within the muffler case, producing a cancellation wave effect, with no flow restriction and without electronic devices.
 

5 Item(s)

Grid List

Set Descending Direction
  • Corsa Impala V6 Dual Rear Exit (00-05)

    Corsa Impala V6 Dual Rear Exit (00-05)

    $1,359.00
    Free Shipping
    Choose between Twin Pro-Series 3.5" Tips or Single Pro-Series 4.0" Tip CORSA REDEFINES PERFORMANCE EXHAUST  Corsa's straight-through design coupled with RSC noise cancellation technology allows them to tune out the undesirable low frequencies that cause drone, while reducing back pressure for your Chevrolet Impala. A reduction in back pressure allows the engine for your Chevrolet Impala to produce more horsepower and torque. Patented Reflective Sound Cancellation (RSC) Technology CORSA uses its patented Reflective Sound Cancellation (RSC) technology to eliminate low frequency resonance while minimizing backpressure. Sound waves are reflected within the muffler case, producing a cancellation wave effect-with no flow restriction and without electronic devices. The RSC design features a pipe running straight through the muffler, incorporating a full 360-degree air gap and allowing sound pressure waves to escape. The waves are channeled and then returned to the gap 180-degrees out-of-phase, canceling specific sound frequencies. All that remains is the clean, crisp sound of performance. NO DRONE/RESONANCE Due to patented RSC noise cancellation technology, your interior is whisper quiet at highway speeds. GREAT PERFORMANCE SOUND We tune in good sounds to cancel out the bad sounds without the use of baffles or interior steel wool packing materials. INCREASED HORSEPOWER & TORQUE Due to straight-through design, the result is increased flow and less back pressure. INCREASED FUEL ECONOMY Less back pressure and more power means your engine performs more efficiently.     EXHAUST SYSTEM FEATURES:   * Straight-through, nonrestrictive design, specifically tuned for the Impala. * Flow bench-tested 55% gain in exhaust flow vs. stock system. * All 304 stainless steel construction, crafted with pride and precision in the USA. * Patented CORSA Reflective Sound Cancellation (RSC) technology for superior sound. * RSC Sport exhaust - produces a deep, aggressive sound with no interior resonance. * Dual rear exit with handcrafted Pro-Series 4.0" tips or twin Pro-Series 3.5" tips (shown above). * No welding required; Bolt-on installation. * Includes hardware and illustrated installation guide. * 50-state emissions legal.     Limited LIFETIME WARRANTY for as long as you own your vehicle         All Chevrolet Impala exhaust systems comply with Caifornias 95-decibel limit when tested in accordance with SAE test procedure, J1169 (May 1998).    
  • 2020-2023 C8 Corvette Corsa 3in Valved Cat Back 4.5in Black Quad Exhaust

    2020-2024 C8 Corvette Corsa 3in Valved Cat Back 4.5in Black Quad Exhaust

    $3,770.99
    Free Shipping
    This 2020-2024 C8 Corvette Corsa 3in Valved Cat Back 4.5in Black Tips Quad Exhaust from Southern Car Parts is a performance exhaust system designed for the Chevrolet Corvette C8. It features a straight-through design with a unique Corsa sound that enhances the vehicle's overall performance and driving experience. The exhaust system is made of high-quality stainless steel, which is both lightweight and durable. The system also includes an active valve that allows drivers to adjust the sound level to their preference. This exhaust system is specifically designed to work with the factory NPP (dual-mode) exhaust system and is a direct bolt-on replacement for the OEM system. It is a great upgrade for anyone looking to increase the power and sound of their Corvette C8 Application: 2020, 2021, 2022, 2023, 2024 C8 Corvette
  • 2020-2023 C8 Corvette Corsa 1.875" Stainless Steel Headers

    2020-2024 C8 Corvette Corsa 1.875" Stainless Steel Headers

    $1,816.99
    Free Shipping
    These Corsa 1.875" Stainless Steel Headers from Southern Car Parts are a performance exhaust header designed for use on 2020-2024 C8 Corvette. The headers are made from high-quality stainless steel and feature mandrel-bent tubing for improved exhaust flow. The 1.875 X 3.0" refers to the size of the primary tubing on the headers, which is the section of the exhaust that connects directly to the engine's exhaust ports. The size of the primary tubing is important because it can affect the performance of the engine by improving the flow of exhaust gases. According to the manufacturer, the Corsa 1.875 X 3.0" Headers 16034 are designed to deliver improved horsepower and torque, as well as a more aggressive exhaust note. The headers are also engineered to be a direct replacement for the factory exhaust manifolds, which can make installation easier for experienced mechanics. It's worth noting that installing aftermarket headers like these can require some mechanical expertise and specialized tools, so it's recommended to have a professional install them. Application: 2020, 2021, 2022, 2023, 2024 C8 Corvette
  • 2020-2023 C8 Corvette Corsa Exhaust Valved Cat Back w/Black Tips NPP 21105BLK

    2020-2024 C8 Corvette Corsa Exhaust Valved Cat Back w/Black Tips NPP 21105BLK

    $2,781.99
    Free Shipping
    The C8 Corvette Corsa Exhaust Valved Cat-Back System with Black Tips (NPP-21105BLK) from Southern Car Parts is a high-performance aftermarket exhaust system designed specifically for the eighth-generation Chevrolet Corvette (C8). Engineered by Corsa Performance, a renowned manufacturer of premium exhaust systems, this cat-back system enhances the overall driving experience and adds a touch of aggression to the Corvette's already impressive performance. Crafted with precision and attention to detail, the Corsa Exhaust Valved Cat-Back System is designed to optimize the exhaust flow, improve horsepower and torque, and create an exhilarating sound signature. It features a valve-controlled design that allows the driver to switch between different sound modes, ranging from a mellow and refined tone to an aggressive and thunderous roar, at the touch of a button. The exhaust system is constructed from premium-grade stainless steel, ensuring durability, corrosion resistance, and longevity. The use of high-quality materials also helps reduce weight, contributing to improved overall performance. The system is meticulously engineered to fit seamlessly with the C8 Corvette's existing exhaust system, making installation hassle-free. One of the standout features of this Corsa exhaust system is the black tips, which add a sleek and distinctive aesthetic to the Corvette's rear end. The black finish complements the Corvette's sporty and aggressive design, giving it a stealthy and menacing appearance. In addition to the enhanced performance and stunning visual appeal, the Corsa Exhaust Valved Cat-Back System with Black Tips provides a host of benefits. The valve-controlled design ensures a pleasant driving experience, allowing for quieter operation during cruising and aggressive performance during spirited driving. The reduced backpressure also helps improve fuel efficiency, while the deep and resonant exhaust note adds a sense of excitement every time you hit the accelerator. Application: 2020, 2021, 2022, 2023, 2024 C8 Corvette
  • 2015-2022 Dodge Challenger SRT Hellcat 6.2L/6.4L Corsa Xtreme Exhaust Black

    2015-2022 Dodge Challenger SRT Hellcat 6.2L/6.4L Corsa Xtreme Exhaust Black

    $2,439.99
    Free Shipping
    Southern Car Parts is pleased to offer this 2.75" Cat-Back, Dual Rear Exit with Twin 3.5" Polished Pro-Series Tips with Xtreme Sound Level for your 2015-2022 Dodge Challenger 6.4L SRT 392 R/T Scat Pack and 6.2L SRT Hellcat with manual shift. Intended for use on MDS or active-valve equipped vehicles. Features: +9% Flow Increase Premium Stainless Steel Construction Easy Bolt-on Installation No Welding Needed Patented No-Drone, Reflective Sound Cancellation (RSCยฎ) Technology Straight-through Design Mandrel Bent All Hardware and Detailed Instructions Included Lifetime Warranty Proudly Manufactured in Berea, Ohio Application: 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 Dodge Challenger 6.4L 6.2L

5 Item(s)

Grid List

Set Descending Direction
Corsa Exhaust Systems

Minimal Price: $ 1,359.00 1359

X