Corvette C6 2005-2008


Corvette C6 2005-2008

2005-2008 C6 Corvette Exhaust

Choose 2005-2008 C6 Corvette exhaust products from Southern Car Parts. We sell a wide range of 2005-2008 Corvette C6 exhaust parts and accessories that can help you boost your vehicle's performance.

26 Item(s)

Grid List

Set Descending Direction
  • Premium Stainless Steel Exhaust Tips Polishing Kit

    Premium Stainless Steel Exhaust Tips Polishing Kit

    $39.95
    So you have spent over $1,000 upgrading your exhaust on your new car and it sounds great and you could not be happier. Until you walk behind your car and see your once shiny exhaust tips covered in soot and road grime. So you wipe them off and a week later they look just as bad as they did before. So this time you throw some wax on them, but that caused them to yellow and trap more dirt. You need a special polish for your exhaust tips that not only cleans the dirt off but seals them so they stay looking great. Our premium stainless steel polishing kit does just that. Our kit includes 2 large professional grade buffing compound sticks to bring back the shine on even the worse looking exhaust tips. A 4" buffing wheel to make cleaning your exhaust tips quick and easy. 2 special cloths for cleaning your exhaust tips at home and one to take along to shows to get your car ready for judging. And unlike other polishing kits, we also include a bottle of Simichrome Polish. Simichrome Polish puts a show winning shine on your exhaust tips and seals them so that they do not get stained like they used to anymore. We also include a set of photo detailed instructions to make cleaning your exhaust tips quick and easy. Our basic kit includes:  4” High-Quality Mushroom Buff w/ drill adapter 2 Special buffing compounds designed to take stainless steel to the next level A supply of Simichrome polish, the best polish hands down (cost $13 alone) 2 Special maintenance cloths (one for your garage and one to keep in the hatch compartment) Detailed Photo Instructions Our Super Deluxe kits include: Everything in the Standard Kit, plus The New 2" Taper Buff w/drill Adapter (to power buff the outside)  Don't think that this kit is only good for polishing exhaust tips.This kit will also allow you to polish any uncoated metal and even dull plastics. So now you can clean and maintain the stainless and chrome trim on your classic cars and the plastic trim on your daily driver as well. Our kit includes enough polishing compound to last for years.   
  • C6 Corvette and 2010 And Up Camaro 12" O2 Sensor Extension

    C6 Corvette and 2010 And Up Camaro 12" O2 Sensor Extension

    $26.47
    Free Shipping
    When installing aftermarket headers and cat-back systems in your vehicle, the oxygen sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant is re-installed. You cannot cut and splice oxygen sensor wiring since this can permanently damage the sensor and considerably reduce the accuracy of the signal. These extensions are "Plug-And-Play" and utilize OEM connectors, terminals and seals with OEM wiring to maintain precisely accurate signals and safely extend the wiring connections. Note: Please check your connector shape and color to see if it matches your application.   Application: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette  Application: 2010, 2011, 2012, 2013, 2014, 2015 Camaro  
  • C6 Corvette MagnaFlow 16495 Street Series Cat Back Exhaust for 2009-2013 LS3 and 2006-2013 LS7

    C6 Corvette MagnaFlow 16495 Street Series Cat Back Exhaust

    $1,782.87
    Free Shipping
    Made in the USA and engineered to last, for those seeking increased performance and better economy, MagnaFlow Street Series Performance Exhaust systems deliver the smooth deep sound you want and the wide-open performance power you need.    MagnaFlow's C6 Corvette Performance Exhaust systems are rugged, reliable, built to last, and their legendary straight-through, wide-open, stainless steel mufflers provide the smooth, deep tone they are famous for. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards.   These exhaust kits and cat-back systems feature mandrel bends to ensure there are no flow restrictions and OEM-style barbed hangers for easy installation. All of MagnaFlow's exhaust systems are factory-checked for proper fit and dyno-tested to verify performance gains. All necessary installation hardware is included and the entire system is backed by MagnaFlow's lifetime warranty.   Fits 2009-2013 LS3 and 2006-2013 LS7 Additional Information Tubing Outer Diameter: 3.0 in. System Type: Cat-Back Tip Outer Diameter: 4 in. Tip Quantity: 2 Single or Dual: Dual Exit Style: Split Rear Material: 100% Stainless Steel Made in the U.S.A. All Mandrel Bent Tubing 409 Stainless Steel Construction Lifetime Warranty Application: 2009, 2010, 2011, 2012, 2013 C6 Corvette LS3 and LS7
  • C6 Corvette and 2010 And Up Camaro 24" O2 Sensor Extension

    C6 Corvette and 2010 And Up Camaro 24" O2 Sensor Extension

    $26.47
    Free Shipping
    When installing aftermarket headers and cat-back systems in your vehicle, the oxygen sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant is re-installed. You cannot cut and splice oxygen sensor wiring since this can permanently damage the sensor and considerably reduce the accuracy of the signal. These extensions are "Plug-And-Play" and utilize OEM connectors, terminals and seals with OEM wiring to maintain precisely accurate signals and safely extend the wiring connections. Note: Please check your connector shape and color to see if it matches your application.   Application: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette  Application: 2010, 2011, 2012, 2013, 2014, 2015 Camaro  
  • C6 Corvette Mild to Wild Exhaust On Demand Switch

    C6 Corvette Mild to Wild Exhaust On Demand Switch Mild2Wild

    Regular Price: $69.95

    Special Price $68.40

    Free Shipping
    Imagine having the ability to turn your C6 Corvette Z06, Grand Sport, ZR1, and NPP exhaust from MILD (exhaust ports closed) to WILD (exhaust ports open) using your OEM Homelink (found on your visor) or via the supplied remote. This revolutionary product lets you control your, 2006-Present Corvette Z06, ZR1, Grand Sport or NPP exhaust system on demand via a tiny wireless remote or the Homelink feature in your car. One of the coolest technologies on the new C6 Z06, ZR1, Grand Sport, and 2007+ NPP equipped Corvette is the “bi-mode” exhaust. Whisper quite up until 3500 RPM and then a wide-open race car sounds as the flaps located in the tips open. The problem is the inability to control this feature. Up until now, the owner’s only choice was to pull the fuse or to install wiring, drill a hole for a switch to turn the quiet mode off (and these sell for $85). After spending $75,000, the last thing I would want to do is start running wires and drilling holes. This patent-pending product requires no drilling or running wires through your car. It’s a simple 5 min simple plug and play installation that anyone can do. Once installed, you will have full control over the exhaust mode, via a simple ON/OFF remote wireless controller or your Homelink transmitter (simple programming required, instructions provided. Please be aware that not all Corvettes use Homelink, some use Car2U. You will need to use the remotes if your car is equipped with Car2U). Once the Homelink is programmed, you can just use that to work your exhaust. You also will get two sleek ON/OFF wireless controls that can be mounted anywhere and will control the exhaust up to 50’ away. The “OFF” mode gives you that race car sound 100% of the time. The “ON” mode works as the stock setting and is quiet to preset OEM 3,500 RPM so the system will work just like the stock system. The switch can be used anytime the car is running, allowing you to show your friends what a cool exhaust you have as you can use the remote and open and close the flaps on demand. Baffles Open, Wild..... Baffles closed, Mild..... You will receive the professionally engineered plug and play wireless receiver, two miniature remotes (batteries included) and the necessary Homelink programming instructions. Believe me, you will be happy with the quality and fit of this Corvette exhaust controller. NOTE: this unit will work with either of the supplied remotes or the OEM visor mounted Homelink system. It will not work with other visor-mounted units. GM has been testing other visor units, so you may not have a Homelink system. If you have a visor unit with a single LED with the home symbol around it you have Homelink and this will work with the visor controls. If not, you will need to use the included remotes. Installation Instructions are Located Here Application: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette
  • C6 Corvette "NPP Exhaust In a Box"

    C6 Corvette "NPP Exhaust In a Box"

    $259.99
    Free Shipping
    Corvette Multi-Mode Exhaust Vacuum Retrofit System NPP in A Box will turn any C6 into a Bi-mode exhaust equipped car, you provide the mufflers, I provide the rest. Comes with selectable start-up mode - lets you select if your Corvette starts loud or quiet. If you already have NPP (bi-mode) mufflers from the factory, just purchase a Mild2Wild switch and you are good to go. If you do not have the factory installed NPP Exhaust system, get the mufflers and our "NPP in a Box kit" and you will have everything you need to convert your car for a fraction of what your local dealership will charge you. Just install the NPP mufflers from GM add NPP IN A BOX and you will have a fully functional NPP system that will use our Mild2Wild Switch (included). All the parts needed are provided to allow you to tap engine vacuum to operate you mufflers (just like the OEM system). No special tools needed and average install is 30min, very simple. What makes our NPP in a BOX your only choice Very Low Operating Current = (less than 1/2 amp) generally systems like this take a few amps so NPP in a box will never / compromise your $80K car Ease Of Installation = A 15-minute simple install, 8-page color picture instructions Quality Of Components = Not only have I been working with the leaders in vacuum control, Each component (enclosure, components, wire, and connectors) are the best you can use. All Parts Are Included except the Mufflers = All tubing, fittings, controllers are included. Comes with a 90-day warranty (No refunds or returns on this item. If defective it will be replaced only) Installation Directions here... Application: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette 
  • C6 Corvette Old School Mild to Wild Exhaust Control Switch Mild2Wild

    C6 Corvette Old School Mild to Wild Exhaust Control Switch Mild2Wild

    $49.99
    Free Shipping
    C6 Corvette Bi-Modal NPP Exhaust Control Foot Switch - Old School Pedal Mild to Wild This Mild to Wild switch allows for a true Old School style left-foot control switch for your very new C6 Corvette NPP bi-modal exhaust system. Just as other exhaust control switches do, this dead pedal Mild to Wild allows for control over your exhaust's quiet and loud modes as dictated by the vacuum valves. However, instead of putting that control at your fingertip, this Old School Mild to Wild puts that control at your feet. It's fun and exciting and really makes for a great "Wow" factor to just tap your foot and change your exhaust from quiet to loud. Installs in minutes: simply remove the OEM dead pedal (very easy, 2 nuts) and install this one. The special flat wire harness simply passes from the driver side to the passenger side and you then simply plug in the adapter into the fuse block. No ground wire to install.  Zero drain starts in the last setting you left it. No fob, no wireless, no visor. The heavy-duty switch is in simple reach, press loud, press quite, how simple. You can even switch it prior to starting the car. Perfect for all C6 Z06, ZR1, and NPP Equipped Corvettes. Application: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette Z06, ZR1, Grand Sport
  • CORVETTE C6 B&B BILLY BOAT PRT EXHAUST SYSTEM FCOR-0425

    C6 Corvette B&B Billy Boat PRT Exhaust System FCOR-0425

    $1,524.99
    Free Shipping
    Billy Boat PRT (Purge Resonance Technology) Exhaust System for the 2005-2008 C6 Corvette (excluding Z06) Please note: This item is sold at our rock bottom price, the best price in the world and we cannot discount further. The new B&B PRT system provides a powerful, aggressive, exhaust tone that's also appreciable and tame at lower, cruising RPMs. Designed to offer the best in HP and Torque gains across the RPM range, and coupled with the Billy Boat Purge Resonance Technology for minimal cabin drone, this system provides all of the benefits of the well-respected Billy Boat Bullet system, in a slightly less tonally aggressive package. A great exhaust for either the performance junkie with the garage queen or the man who makes his C6 Corvette his daily driver. PRT Exhaust – Aggressive Sound at Wide-Open-Throttle, Mild sound at cruise The Billy Boat Exhaust PRT C6 exhaust system is the latest in resonance control technology from BBE. Completely redesigned and re-engineered for the C6, the system is simple in design, though more complex in theory. You can now have a mellow NO-DRONE sound at cruising speeds and a sport note when you’re tearing up the streets. It allows true straight through exhaust passage under aggressive driving conditions, though a mellow sound is emitted at cruising speeds thanks to the unique Purge Chamber. Designed especially for the automatic, paddle shift and cars with headers, this Billy Boat Exhaust PRT system works purely on physics and adrenaline. Increases of 15 hp and 14 ft-lbs over stock. Tips are available with your choice of polished Stainless Steel tips--which are finished to a gorgeous mirror-like shine--, and new Black Satin Ceramic Coated Exhaust tips--for a more unique and aggressive modified appearance. Southern Car Parts was the Sponsor of the Chad Boat #84 Toyota for the Chicago race back in 2013... We've got a great business relationship with Billy Boat Exhaust and Southern Car Parts knows the B&B Product line better than anyone in the business. We stock many C5, C6, and C7 exhaust systems. Application: 2005, 2006, 2007, 2008 C6 Corvette
  • CORVETTE C6 EXHAUST BILLY BOAT B&B BULLET FCOR-0415 FCOR-0410

    C6 Corvette Exhaust Billy Boat B&B Bullet FCOR-0415

    $1,279.26
    Free Shipping
    Please note: This item is sold at our rock bottom price, the best price in the world and we cannot discount further. The Bullet is available with Round Tips and Oval Tips. Please make your selection: FCOR-0415 Round Tips FCOR-0410 Oval Tips The Billy Boat C6 Corvette Bullet is the most aggressive sounding performance exhaust system to be released from B&B and has quickly become the industry standard for a deep, aggressive muscle car sound. Your C6 Corvette can see performance gains of up to 18 rear wheel horsepower and 17 foot-pounds of torque from the Bullet. A direct bolt-on exhaust system, you can easily replace your stock exhaust system, adding HP and making your C6 sound much more aggressive. Constructed of 100% T-304 Stainless steel and the peace of mind of a lifetime warranty, you cannot go wrong with a Billy Boat exhaust for your C6 Corvette.     Available with Quad Oval 4.5" or Quad Round 4" Tips. Since 1989 Billy Boat Performance Exhaust has designed, tested, and manufactured the highest quality stainless steel exhaust systems available. Originally specializing in Porsche 911 performance exhaust systems, oil coolers, and intercoolers, B&B introduced the Tri-Flo line named after its unique 3-into-1 Porsche header. Today in its state-of-the-art facility, Billy Boat continues to develop the highest performing exhaust systems for most sports cars, trucks, and SUVs. With an in-house dyno facility and R&D staff, we stay on top of current vehicle trends and deliver products that fit and perform to an unsurpassed level of standards. Tips are available with your choice of polished Stainless Steel tips--which are finished to a gorgeous mirror-like shine--, and new Black Satin Ceramic Coated Exhaust tips--for a more unique and aggressive modified appearance. See the installation below... Southern Car Parts was the Sponsor of the Chad Boat #84 Toyota for the Chicago race back in 2013... We've got a great business relationship with Billy Boat Exhaust and Southern Car Parts knows the B&B Product line better than anyone in the business. We stock many C5, C6, and C7 exhaust systems. Application: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette
  • C6 Corvette Exhaust Billy Boat B&B Fusion Complete Kit

    C6 Corvette Exhaust Billy Boat B&B Fusion Complete Kit

    $2,428.00
    Free Shipping
    This is the Fusion complete NPP kit for Corvette's without the factory NPP option This is the Billy Boat C6 Fusion exhaust Quad 4" Tips for the C6 Corvette 2005-2008 without the NPP factory Option. The Billy Boat Fusion comes with everything you need (including the Mild to Wild Z06 Exhaust Switch) to give your Corvette multimode exhaust! What is bi-modal exhaust?The Fusion is a bimodal exhaust system, meaning it has two passages, or modes, that the exhaust can travel through the muffler. Each of the mufflers has two outlets, with one side having a butterfly type valve which allows the exhaust flow to be shut off, regulating which side of the muffler the flows exhaust. One side of the muffler is the "quiet" side, and one side is the "loud" side. The "quiet" side is a smaller, muffled and chambered tube, while the "loud" side is 3" tubing straight through.  How loud is it?Through our development and customer feedback, we have shortend the muffler for 2008, making the loud side of the muffler louder, which results in a tone similar to the famous Bullet system. In the closed position, the tone would be slightly louder than the standard Route 66 system. What controls the valves?The butterfly is controlled by a vacuum valvem, which we built and developed completely in house. On the Z06 and the 2008 C6 with the NPP option, this valve is controlled by the ECU. The valve opens based on RPM and throttle position. The problem is the factory exhaust is very quiet, even with the valve open. Our expertise at Billy Boat is getting the tone right for your Corvette, and they think they have nailed this one. Even in the closed position, the tone is deeper, louder, and more aggressive. Open the valves, the overall volume and tone increases to the point heads will turn when you drive up. What if I have a standard C6?This is a complete plug and play kit that is meant to be used on the standard C6 without the factory installed Mulitmode Option. We have used the engine as the vacuum source (it is the same port the factory uses for the NPP) and the installation is simple and straight forward. Is the system 2 1/2" or 3"?On the Corvette Z06 and ZR1 the Z06 BB Fusion System exhaust system is 3", while on the C6 it is 2 1/2". Will they bolt up to my stock H pipe or my stock headers?Each part of the system will fit a stock H-pipe or the stock headers. The parts can be mixed and matched (rear exhaust, xpipe, and long tube headers) . Billy Boat has combined the best of the Bullet exhaust with the best new technology to give you the Fusion System for your Corvette. The muffler tips are double walled, 4" round or 4.5" oval. The entire system comes completely polished and the result is a truly spectacular look and sound that gives this high-performance sports car the look and aggressive sound which will have heads turning everywhere you go. All BB products are precision built in rugged fixtures, completely TIG welded, and are a direct replacement for stock exhaust components and include all hardware and gaskets. No machining, no cutting, and no welding means easy installation. We provide the perfect mix of performance, sound, and style your Corvette. Each Billy Boat Performance Exhaust system is backed by a lifetime warranty against rust, corrosion or burn through and 2 full years against defects in materials or workmanship. Tips are available with your choice of polished Stainless Steel tips which are finished with a gorgeous mirror like shine or new Black Satin Ceramic Coated Exhaust tips-for a more unique and aggressive modified appearance. Tips are available as Round or Oval (Oval shown below, round tips displayed in previous images. Application: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette Southern Car Parts was the Sponsor of the Chad Boat #84 Toyota for the Chicago race back in 2013... We've got a great business relationship with Billy Boat Exhaust and Southern Car Parts knows the B&B Product line better than anyone in the business. We stock many C5, C6, and C7 exhaust systems.  
  • C6 Corvette MagnaFlow 16839 Competition Cat Back Exhaust

    C6 Corvette MagnaFlow 16839 Competition Cat Back Exhaust

    $1,574.56
    Free Shipping
      The MagnaFlow Race Series Exhaust Systems are designed for the ultimate in high performance and the loudest most aggressive racecar sound possible. Race Series exhaust systems remove the restrictive OEM muffler to virtually eliminate backpressure and maximize exhaust flow. The Race Series is recommended for those seeking maximum performance, reduced mass, and a loud aggressive racecar exhaust tone that demands attention.  MagnaFlow's C6 Corvette Performance Exhaust systems are rugged, reliable, built to last, and their legendary straight-through, wide-open, stainless steel mufflers provide the smooth, deep tone they are famous for. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards.   These exhaust kits and cat-back systems feature mandrel bends to ensure there are no flow restrictions and OEM-style barbed hangers for easy installation. All of MagnaFlow's exhaust systems are factory-checked for proper fit and dyno-tested to verify performance gains. All necessary installation hardware is included and the entire system is backed by MagnaFlow's lifetime warranty.   Fits 2006-2013 7.0 Liter LS7 and 2010-2013 6.2 Liter LS3   Additional Information Tubing Outer Diameter: 3.0 in. System Type: Cat-Back Tip Outer Diameter: 4 in. Tip Quantity: 4 Single or Dual: Dual Exit Style: Split Rear Material: 100% Stainless Steel Made in the U.S.A. All Mandrel Bent Tubing 409 Stainless Steel Construction Lifetime Warranty   Application:  2009, 2010, 2011, 2012, 2013 C6 Corvette LS3 and LS7
  • C6 Corvette Borla ATAK Exhaust with X-Pipe 140453

    C6 Corvette Borla ATAK Exhaust with X-Pipe 140453

    $2,216.99
    Free Shipping
    This is the brand new C6 Corvette Borla ATAK Exhaust.....The Borla ATAK system is considered the most aggressive of C6 Corvette Borla systems, with a raspy deep throaty muscle car sound. ATAK, which stands for Acoustically Tuned Applied Kinetics is Borla's latest muffler design that is aimed at the Corvette High-Performance Purists. Notice: This Exhaust system will not fit 2009+ C6 Corvettes. Designed to fit the 2005-2008 C6 Corvettes (Non-Z06). BORLA has announced the development of a revolutionary new exhaust technology that enables their engineers to deliver unprecedented vehicle-specific control over the acoustical note of an exhaust throughout the RPM range while retaining 100% of the power-adding capabilities of BORLA’s patented Multicore design. Called ATAK (Acoustically-Tuned Applied Kinetics), this exclusive technology (U.S. patent #5,248,859) produces the highest available dB (decibel) levels in the BORLA street-legal lineup and is designed for high-performance purists who prefer exhaust notes over their stereos. The focus of ATAK is to pump the volume while retaining clarity of sound, at the same time avoiding the drone and distortion typically found in louder exhausts. With ATAK, the sound output is tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output. The development of each ATAK system begins with extensive study of each vehicle’s acoustical properties. The technology is based on custom-tuned attributes of the internal muffler cores, which are calibrated on a vehicle-by-vehicle basis to deliver the most desirable sound. BORLA is now shipping Cat-Back and-or Rear Section ATAK exhaust systems for a wide variety of popular applications such as Mustang (including 2011 GT V6), Camaro, Corvette, Challenger, GTR, and more in development. This ATAK system has been specifically tuned for the '05-'08 C6 Corvette. Like all BORLA exhaust products, each system is handmade in the USA by master craftspeople and features premium 300-Series austenitic stainless steel construction, mandrel bending by computer-controlled CNC machinery to ensure maximum flow and a perfect fit, mirror-polished tips, and a Million-Mile Warranty. BORLA Cat-Back exhausts feature patented, straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy and the distinctive BORLA Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium austenitic stainless steel, superior to T-400 series knockoffs, to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. Best of all, BORLA stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand. Application: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette
  • C6 Corvette Borla Stinger Exhaust Cat-Back and X-Pipe 140128

    C6 Corvette Borla Stinger Exhaust Cat-Back and X-Pipe 140128

    $1,886.99
    Free Shipping
    Includes the X-Pipe!!! Please note this system will not fit on 2009+ cars..2009+ Borla Corvette Exhaust is here. Borla Performance Industries once again proves why they have led the aftermarket performance exhaust industry for over 26 years. This is the Corvette C6 Borla "Stinger" system. Aggressive exhaust note and appearance make the Borla system for the C6 Corvette a perfect combination. Please note that this is the Sport1 system. Borla is discontinuing this system after completely revamping their sport exhaust in late 2011. The new Sport2 exhaust features the same powerful and aggressive tone of the S1 but with diminished cabin drone. This system will only remain on sale while supplies last.Available in three different Tip Styles: Quad Round Tip - #140128 Quad Oval Tip - 140131 Dual Rectangular Tip - 140133 This is the "S" or Sport pipe so the sound is aggressive. Our Part #140128 is a true dual Cat-Back system employing now famous BORLA "S" Style race-bred 5" diameter straight through mufflers that feed two 4" round, rolled edge, angle cut tips on each outlet. Make no mistake, this is an aggressive exhaust, proclaiming loud and clear that 400+ horses are ready to stampede under this hood. #140128 is a full 14 pounds lighter than the stock system, includes the famous Borla X pipe (also sold separately as Part #60089) after the factory cats and flows a full 300cfm more than the factory system which, as most engine builders will confirm, accounts for the significant power improvements. Perhaps more importantly, this flow will also maximize other performance enhancements because each BORLA exhaust is tuned to get peak output from any aftermarket performance upgrade. Installed on your Corvette, you can expect a 10-12 HP gain right from the start. 12-15 hp when installed with the X Pipe.   Weight Comparisons:Stock Cat-Back Exhaust (with h pipe)........58 Lbs.Borla S Type Cat-Back (w with X pipe).......44 Lbs.Rear Sections OnlyStock rear section.................................... 40 Lbs.Borla S Type rear section...........................29 Lbs. BORLA is committed to providing world-class exhaust products which surpass the expectations of our customers. To that end, our facility is complete with a state-of-the-art test and development center where we are continually improving our manufacturing efficiency and standards. We have pioneered a variety of improvements in the design of performance exhaust systems. Alex Borla currently holds three US patents for innovative exhaust system technology, and the company has won numerous "Best New" product awards in the industry. Every BORLA header and the Cat-Back system is made from T-304 stainless steel (superior to 409 or aluminized steel) employing mandrel-bent tubing, all-welded construction, and is designed for accurate fit and easy installation. Nearly 30 years experience and special merge collector technology provide the ultimate in power and endurance. The performance advantages of a BORLA are widely recognized. The top engine builders in the racing world rely on BORLA exhaust for maximum performance. In fact, BORLA is at the forefront of the movement toward responsible racing with our full line of patented, award and race-winning racing mufflers that not only maintain a race engine’s power but in some instances actually add power. This technology is incorporated into BORLA exhaust for the street, providing 7-10% increased horsepower and torque when you plant your foot, and improved gas mileage at cruising speeds.   Application: 2005, 2006, 2007, 2008 C6 Corvette
  • C6 CORVETTE BILLY BOAT X-PIPE FCOR-0430

    C6 Corvette Billy Boat X-Pipe FCOR-0430

    $557.72
    Free Shipping
    Billy Boat X-Pipe for the C6 Corvette Please note: This item is sold at our rock bottom price, the best price in the world and we cannot discount further. Looking at getting a new C6 Corvette Billy Boat Exhaust system? Do not forget the X-Pipe. The Billy Boat X-Pipe reduces turbulence in your exhaust system and allows for a free-flowing system. The Billy Boat X Pipe will bolt right up to your OEM system or will connect up with most all aftermarket exhaust systems. The Billy Boat Corvette X pipe evens the exhaust pulses with a synchronized crossover in the center section, resulting in a deeper, smoother tone.  Application: 2005, 2006, 2007, 2008 C6 Corvette
  • C6 Corvette Exhaust Borla Sport 11744

    C6 Corvette Borla Sport Exhaust 11744

    $1,381.99
    Free Shipping
    Borla C6 Rear Section system without X pipe. Fits all C6 Corvette 's (except the C6 Z06 and 2009+ models). For 2009+ Model Corvettes, use this Borla system, Borla 11766. The X-pipe not included nor is not needed to use this system but can be added later for additional hp. This is the aggressive sounding Sport system or otherwise known as the Stinger.If you are more interested in the Borla Touring system, click here... .Corvette Borla Touring Exhaust Free shipping for a limited time. BORLA engineers went right to work on the C6 Corvette as soon as they were available. We have put together the largest variety of options in the industry, and there’s more on the way. Cat-Back systems are available with the highly popular “S-Type” muffler and merge “X” pipe for those who like it on the wild side as well as with our “Touring” muffler for those who prefer it mild. Both come in an assortment of tip styles and can be purchased with or without an “X” pipe. Borla Performance Industries once again proves why we’ve led the aftermarket performance exhaust industry for over 26 years. BORLA has an exalted heritage with Chevrolet performance vehicles. From the C5R LeMans Winning Corvettes to privateers like KTEC, Pratt-Miller, Lingenfelter and Lou Gigliotti who have enhanced BORLA’s knowledge of both the vehicle dynamics and power-plant engineering. The new C6 is a muscle car with a big, powerful engine and sophisticated sexy chassis. BORLA has always used the transfer of technology from racing to the street as a tool, and the C6 plays right into that wheelhouse. With an experienced R&D staff, the BORLA team gave the Chevrolet mark the attention it deserves, rolling out several new system options. Airflow management and exhaust engineering is a science with which BORLA has more experience than anyone in the exhaust aftermarket. Weight Comparisons:Stock Cat-Back Exhaust (with h-pipe)…………………..…58 Lbs.Borla S Type Cat-Back (with X-pipe)……………44 Lbs. Rear Sections OnlyStock rear section…………………………….. 40 Lbs.Borla S Type rear section……………..……….29 Lbs. We saw a 10-15 hp gain with our S-Type rear section and a few more with our X-pipe. The full S-Type Cat-Back system with the X-pipe should consistently get 12-15hp on a stock C6 but can also get 18+ hp depending on the conditions. Please note a number of variables affect the horsepower delta with dynamometers. Borla Performance Industries, the original pioneers of aerospace-grade T-304 stainless steel (superior to 409 or aluminized steel) free-flow exhaust utilizes patented award and race winning technology to deliver quality, sound, performance gains and enhanced fuel economy — all with an easy bolt-on installation. All BORLA street products carry an unsurpassed written million-mile warranty. Borla offers a variety of options for the C5, C6, and Z06. Choose from several tip styles and muffler designs. Cat-Backs and Rear Sections are available with either the highly popular “S-Type” muffler or the “Touring” muffler.  The “S-Type” is a smaller, round muffler with a center-in/center-out configuration giving a more aggressive sound and higher flow.  For those who prefer it on the milder side, we have the “Touring” muffler -- a larger case producing less aggressive sound.  Some come with an assortment of tip designs.  Application: 2005, 2006, 2007, 2008 C6 Corvette
  • C6 Corvette Exhaust Corsa Extreme

    C6 Corvette Exhaust Corsa Extreme

    $2,002.99
    Free Shipping
    Corsa latest and most aggressive sounding exhaust to date for the C6 Corvette (2005-2008) This system will not work for 2009+ models.   CORSA Performance has done it again. They've taken their popular C6 Sport Exhaust and kicked it up a notch with the all-new CORSA Xtreme. Always loved CORSA quality and craftsmanship, but wanted even more attitude and sound? Then this is your exhaust. Deeper tone at idle, yet louder outside under throttle, this system delivers their most aggressive sound yet, while still controlling the interior sound level. Like all CORSA Performance exhaust systems, the new CORSA Xtreme is constructed of 100% premium stainless steel and carries a limited lifetime warranty. Unlike the competition, there is no cheap packing material to wear down and cause the system to get louder with age. When you want the REAL sound of speed, you want CORSA Xtreme. Features* All 304L stainless steel construction, crafted with pride and precision in the USA.* Flow bench-tested 64% gain in exhaust flow vs. stock muffler.* No welding or cutting required; Bolt-on installation.* Includes hardware and detailed full-color installation instructions.* 50-state emissions legal.* Limited lifetime warranty for as long as you own your C6. Available with both 3.5" Pro Series Stainless Tips (#14469) and 4" Pro Series Stainless Tips (#14960)! Free shipping !!!!! THE CORSA DISTINCTIONNo Other Exhaust Manufacturer Delivers All Three:No Resonance/Drone - due to our patented Reflective SoundCancellation (RSC) technology; your exhaust is whisper quiet at highway speeds.Increased Flow and Less Backpressure - resulting from a straight-through, nonrestrictive design.Great Performance Sound - we tune in the good sounds and cancel the bad, without the use of baffles or steel wool packing material.     POWER-PULSE RSC  REFLECTIVE SOUND-CANCELLATION MUFFLER TECHNOLOGY Now you can have the ultimate exhaust performance and sound for your Corvette, without the intrusive in-cabin resonance found in other aftermarket exhaust systems. CORSA Performance delivers The Best Sound Around™ with Power-Pulse RSC™ muffler technology, engineered to increase performance and eliminate annoying interior exhaust noise. The Power-Pulse RSC muffler design features a pipe running straight through the muffler that incorporates a full 360-degree air gap that allows sound pressure waves to escape. The waves are channeled and then returned to the gap 180 degrees out of phase, canceling specific sound frequencies. All that remains is the clean, crisp sound of the V-8 performance.   CORSA Redefines Exhaust Technology     The exclusive patented Power-Pulse RSC™ muffler design delivers the throaty exhaust tones that define your performance Corvette on the open road. But inside, you will experience the quiet ride, that until now, you've only dreamed about.      CORSA has now made it possible with RSC - Reflective Sound Cancellation technology - using aeronautical and space-age noise-suppression technology. Sound waves are reflected within the muffler case, producing a cancellation wave effect - with no flow restriction and without electronic devices!   Application: 2005, 2006, 2007, 2008 C6 Corvette
  • C6 Corvette 2005-08 Corsa Exhaust Sport 14169

    C6 Corvette 2005-08 Corsa Sport Exhaust 14169

    $2,002.99
    Free Shipping
    The SPORT exhaust system sound level may exceed local legislated sound levels for street use in three states: CA, WA and ME - Sport C6 Systems are intended for track or off-road use in these states. Features All 304 stainless steel construction, crafted with pride and precision in the USA. Flow bench-tested 64% gain in exhaust flow vs. stock muffler. No welding or cutting required; Bolt-on installation. Includes hardware and detailed full-color installation instructions. 50-state emissions legal. Limited lifetime warranty for as long as you own your C6. No Resonance/Drone - due to our patented Reflective Sound Cancellation™ (RSC™) technology; your exhaust is whisper quiet at highway speeds. Increased Flow and Less Backpressure - resulting from a straight-through, nonrestrictive design. Great Performance Sound - we tune in the good sounds and cancel the bad, without the use of baffles or steel wool packing material. Corsa exhausts from Southern Car Parts feature straight through designs, different sound levels, and most systems come with different tip options such as the black stealth tips and Polished double wall tips. There is no drone with the CORSA exhaust system because the CORSA exhaust system uses RSC technology to eliminate problem frequencies that cause interior drone/resonance at cruising speeds. CORSA's Chevrolet Corvette exhaust system features a patented non-restrictive Straight-through design reduces back pressure and frees up additional power resulting in improved horsepower and torque. As an additional bonus, your Chevrolet Corvette can result in greater fuel economy because of less back pressure and more power. There are 4 different sound levels available. Touring, Sport, Extreme and non-designated default systems where there is only one sound level. Xtreme - their loudest offering for those who want the loudest badest sounding system out there with an aggressive tone, CORSA's Sport systems for their mid sound level is a great alternative for customers who want an aggressive sounding unique exhaust but who do not necessarily want to hear it all the time. The sport option is a good option for mildly modified vehicles and for comfortable highway cruising, CORSA's Touring exhaust is their quietest system for those with highly modified engines or those who wish to only have a slightly louder tone than stock. If there is no designation on sound level in the part name then the sound level is somewhere between a Sport and a Touring system. Corsa Exhausts feature 304 Stainless construction throughout and are made in the USA. Corsa dB Series exhausts are their lower cost alternatives for trucks that feature mixed materials for construction and single wall tips depending on the application. Installation Instructions * Shipping Notes: Please note FREE Shipping refers to shipping within the contiguous contential US. All other locations extra. If your order will be delayed you will be notified via email the estimated shipping date.     Application: 2005, 2006, 2007, 2008 C6 Corvette
  • C6 Corvette Borla ATAK Axleback Exhaust 11816

    C6 Corvette Borla ATAK Axleback Exhaust 11816

    $1,858.99
    Free Shipping
    For the 2005-2008 Corvette's only (not for the Z06 or ZR1) This is the new and improved Borla ATAK system for the 2005-08 C6 Corvette. This exhaust utilizes the incredible, aggressive, and clean exhaust note that the Borla ATAK systems are known for and and has new and improved mufflers designed to minimalize cabin drone. This exhaust system is loud, aggressive, and clean, and really pairs perfectly with the C6 Corvette's LS2 engine to give a true race-car quality to your exhaust sound. The drone is greatly reduced from the prior ATAK systems thanks to newly improved ATAK mufflers, and there's no compromising of the exhaust tone and exterior exhaust volume. This Borla system does NOT come with the X Pipe but will bolt right up to the OEM H pipe without any issue. You can expect a 10-15 HP increase across the RPM range from installing this free flowing stainless steel exhaust from Borla. Application: 2005, 2006, 2007, 2008 C6 Corvette
  • KoolMat Exhaust Heat Shield

    KoolMat Exhaust Heat Shield

    $469.99
    Have you ever noticed how hot the center console of your Corvette gets? The reason is because the exhaust runs right underneath the center console and there is little to no insulation to prevent the heat from coming up into the cabin of your Corvette The HeatMaster Heat shield solves this problem. It is a perfect solution to keep exhaust heat out of the cabin of your Corvette and under the car. The KoolMat Heat shield reflects exhaust heat away from the cabin and can stand direct temperatures in excess of 1000 degrees. Very simple to install and last the life of your Corvette. Compatible with all C6 and C5 Corvettes including the Z06, ZR1, and Grand Sport.
  • C6 Corvette Exhaust Borla Sport Type II 11815

    C6 Corvette Exhaust Borla Sport Type II 11815

    $1,597.99
    Free Shipping
    The Borla Sport, also known as the Stinger and S-Type, was one of the most universally respected exhaust systems available for the C6 Corvette but did have some complaints. Mainly, those complaints focused on excessive cabin drone from that system. Well, Borla Performance Exhaust Systems is run by a number of automotive perfectionists, and they took these criticisms to heart. Going back to R&D in 2011, they developed this new Sport system which features the same deep, powerful, and aggressive exhaust tone of the prior system but also couples with a greatly decreased cabin drone. What has resulted is one of the most incredible sounding and evenly balanced exhaust systems on the market today. By greatly increasing air flow through the exhaust piping and straight-through muffler design, a new Borla exhaust will provide HP and Torque gains through the RPM range for your C6 Corvette. These performance gains will also be coupled with incredible exhaust tonal and volume improvements that truly unleash the beast that is the rumble and growl of an American small-block V8 system. This system will provide your C6 Corvette with the unmistakable tone that only a Chevy LS engine can provide. The system features quad, 4" round exhaust tips. This is an axle back system and does NOT include the upgraded Borla X-Pipe. BORLA engineers went right to work on the C6 Corvette as soon as they were available. We have put together the largest variety of options in the industry, and there’s more on the way. Cat-Back systems are available with the highly popular “S-Type” muffler and merge “X” pipe for those who like it on the wild side as well as with our “Touring” muffler for those who prefer it mild. Both come in an assortment of tip styles and can be purchased with or without an “X” pipe. Borla Performance Industries once again proves why we’ve led the aftermarket performance exhaust industry for over 26 years. BORLA has an exalted heritage with Chevrolet performance vehicles. From the C5R LeMans Winning Corvettes to privateers like KTEC, Pratt-Miller, Lingenfelter and Lou Gigliotti who have enhanced BORLA’s knowledge of both the vehicle dynamics and power-plant engineering. The new C6 is a muscle car with a big, powerful engine and sophisticated sexy chassis. BORLA has always used the transfer of technology from racing to the street as a tool, and the C6 plays right into that wheelhouse. With an experienced R&D staff, the BORLA team gave the Chevrolet mark the attention it deserves, rolling out several new system options. Airflow management and exhaust engineering is a science with which BORLA has more experience than anyone in the exhaust aftermarket. We saw a 10-15 hp gain with our S-Type rear section and a few more with our X-pipe. The full S-Type Cat-Back system with the X-pipe should consistently get 12-15hp on a stock C6 but can also get 18+ hp depending on the conditions. Please note a number of variables affect the horsepower delta with dynamometers. Borla Performance Industries, the original pioneers of aerospace-grade T-304 stainless steel (superior to 409 or aluminized steel) free-flow exhaust utilizes patented award and race winning technology to deliver quality, sound, performance gains and enhanced fuel economy — all with an easy bolt-on installation. All BORLA street products carry an unsurpassed written million-mile warranty. Borla offers a variety of options for the C5, C6, and Z06. Choose from several tip styles and muffler designs. Cat-Backs and Rear Sections are available with either the highly popular “S-Type” muffler or the “Touring” muffler. The “S-Type” is a smaller, round muffler with a center-in/center-out configuration giving a more aggressive sound and higher flow. For those who prefer it on the milder side, we have the “Touring” muffler -- a larger case producing less aggressive sound. Some come with an assortment of tip designs. 
  • C6 Corvette Exhaust Borla SportII Catback Exhaust 140452

    C6 Corvette Exhaust Borla SportII Catback Exhaust 140452

    $2,189.99
    Free Shipping
    The Borla Sport, also known as the Stinger and S-Type, was one of the most universally respected exhaust systems available for the C6 Corvette but did have some complaints. Mainly, those complaints focused on excessive cabin drone from that system. Well, Borla Performance Exhaust Systems is run by a number of automotive perfectionists, and they took these criticisms to heart. Going back to R&D in 2011, they developed this new Sport system which features the same deep, powerful, and aggressive exhaust tone of the prior system but also couples with a greatly decreased cabin drone. What has resulted is one of the most incredible sounding and evenly balanced exhaust systems on the market today. By greatly increasing air flow through the exhaust piping and straight-through muffler design, a new Borla exhaust will provide HP and Torque gains through the RPM range for your C6 Corvette. These performance gains will also be coupled with incredible exhaust tonal and volume improvements that truly unleash the beast that is the rumble and growl of an American small-block V8 system. This system will provide your C6 Corvette with the unmistakable tone that only a Chevy LS engine can provide. System features quad, 4" round exhaust tips. This is the catback exhaust system which also includes the upgraded Borla X-Pipe mid-pipe for greater performance, a more powerful and even exhaust tone and decreased deceleration pop. BORLA engineers went right to work on the C6 Corvette as soon as they were available. We have put together the largest variety of options in the industry, and there’s more on the way. Cat-Back systems are available with the highly popular “S-Type” muffler and merge “X” pipe for those who like it on the wild side as well as with our “Touring” muffler for those who prefer it mild. Both come in an assortment of tip styles and can be purchased with or without an “X” pipe. Borla Performance Industries once again proves why we’ve led the aftermarket performance exhaust industry for over 26 years. BORLA has an exalted heritage with Chevrolet performance vehicles. From the C5R LeMans Winning Corvettes to privateers like KTEC, Pratt-Miller, Lingenfelter and Lou Gigliotti who have enhanced BORLA’s knowledge of both the vehicle dynamics and power-plant engineering. The new C6 is a muscle car with a big, powerful engine and sophisticated sexy chassis. BORLA has always used the transfer of technology from racing to the street as a tool, and the C6 plays right into that wheelhouse. With an experienced R&D staff, the BORLA team gave the Chevrolet mark the attention it deserves, rolling out several new system options. Airflow management and exhaust engineering is a science with which BORLA has more experience than anyone in the exhaust aftermarket. We saw a 10-15 hp gain with our S-Type rear section and a few more with our X-pipe. The full S-Type Cat-Back system with the X-pipe should consistently get 12-15hp on a stock C6 but can also get 18+ hp depending on the conditions. Please note a number of variables affect the horsepower delta with dynamometers. Borla Performance Industries, the original pioneers of aerospace-grade T-304 stainless steel (superior to 409 or aluminized steel) free-flow exhaust utilizes patented award and race winning technology to deliver quality, sound, performance gains and enhanced fuel economy — all with an easy bolt-on installation. All BORLA street products carry an unsurpassed written million-mile warranty. Borla offers a variety of options for the C5, C6, and Z06. Choose from several tip styles and muffler designs. Cat-Backs and Rear Sections are available with either the highly popular “S-Type” muffler or the “Touring” muffler. The “S-Type” is a smaller, round muffler with a center-in/center-out configuration giving a more aggressive sound and higher flow. For those who prefer it on the milder side, we have the “Touring” muffler -- a larger case producing less aggressive sound. Some come with an assortment of tip designs. 
  • C6 Corvette  Exhaust Corsa X-Pipe

    C6 Corvette Exhaust Corsa X-Pipe

    $563.99
    Free Shipping
    CORSA's XO-Pipe design provides balanced side-to-side exhaust flow and increased performance and reduces the "idle burble" and deceleration popping common to most C6 Corvette models. It is the perfect complement to the CORSA Sport exhaust system. CORSA's full-length, 2.5 inch Crossover Pipes are designed to bolt on behind the catalytic converter and mount to the muffler over-axle pipe flanges. And just like CORSA exhaust systems, they are guaranteed for as long as you own your C6 Corvette . * Fits all C6 Corvette (M/T) and (A6) models. * All 304 stainless steel construction, crafted with pride and precision in the USA. * 2.5" diameter, 16-gauge stainless steel with mandrel bends. * Balanced side-to-side exhaust flow for increased power. * Improves exhaust flow, at the same time smoothing out the LS2™ engine pulses for better throttle response and a cleaner sound. * Includes all necessary hardware and illustrated installation guide. * Bolt-on; no welding required * 50-state emissions legal.   MT 14163 , A6 14127
  • C6 Corvette Exhaust Borla Touring Axleback Exhaust 11814

    C6 Corvette Exhaust Borla Touring Axleback Exhaust 11814

    $1,499.99
    Free Shipping
    This is the new and updated Borla touring exhaust system for the C6 Corvette . This Borla exhaust system features quad 4" angle cut round tips and Borla's own specially designed touring level mufflers. The Borla Touring exhaust system provides a more powerful exhaust tone and greater exhaust volume, but is by no means an overly aggressive exhaust. The most tame of the Borla exhaust systems for the C6 Corvette, the focus of the touring is to minimize cabin drone for the most luxuriously quiet ride inside the vehicle, and the extra sound and performance outside. This is the Borla Touring (not as aggressive sounding) exhaust. For a more aggressive sound get the Corvette Sport II Exhaust system.  Borla Performance Industries has once again proven why we’ve have led the aftermarket performance exhaust industry for over 26 years. BORLA has an exalted heritage with Chevrolet performance vehicles. From the C5R LeMans winning Corvettes to privateers like KTEC, Pratt-Miller, Lingenfelter and Lou Gigliotti who have enhanced BORLA’s knowledge of both the vehicle dynamics and the power-plant engineering. The new C6 is a muscle car with a big powerful engine on a sophisticated, sexy chassis. BORLA has always used the transfer of technology from racing to the street as a tool, and the C6 plays right into that wheelhouse. With an experienced R&D staff, the BORLA team has given the Chevrolet mark the attention it deserves by rolling out several new systems for the Corvette C-6. Airflow management and exhaust engineering is a science with which BORLA has more experience than anyone in the exhaust aftermarket. In responding to requests from our customers, BORLA announces a new Touring Line for the C6 Corvette incorporating the great BORLA race-bred straight through flow with a less aggressive, mellow, but powerful sound. The performance matches the famous BORLA systems of the past, but use of unique muffler and exhaust configuration cancel additional high-frequency sound waves. The accumulation of this system is a powerful sound that isn’t offensive.  The BORLA system flows a full 300cfm more than the factory system which, as most engine builders will confirm, accounts for the significant power improvements. Perhaps more importantly, this flow will also improve performance for other enhancements because all BORLA exhausts are tuned for maximum output from any aftermarket performance upgrade. BORLA offers a variety of options for the C5 and C6. Choose from several tip styles and muffler designs. Cat-Backs and Rear Sections are available with either the highly popular “S-Type” muffler or the “Touring” muffler. The “S-Type” is a smaller, round muffler with a center-in and center-out configuration giving a more aggressive sound and higher flow. For those who prefer it on the milder side, we have the “Touring” muffler -- a larger case producing less aggressive sound. Both come with the same assortment of tip designs.  Borla Performance Industries, the original pioneers of aerospace-grade T-304 stainless steel (superior to 409 or aluminized steel) free-flow exhaust utilizes patented award and race winning technology to deliver quality, sound, performance gains and enhanced fuel economy — all with an easy bolt-on installation. All BORLA street products carry an unsurpassed written million-mile warranty.
  • C6 Corvette Flowmaster Catback Exhaust 817512

    C6 Corvette Flowmaster Catback Exhaust 817512

    $1,019.95
    Free Shipping
    If you want a great sounding exhaust system but do not want to pay a fortune then Flowmaster has the system for you. Allow your car the true muscle car sound it was meant to have a good price and an easy install with a Flowmaster exhaust. 2005 - 2008 C-6 (excluding Z06) Corvette American Thunder Kit. * Special 50 Series Mufflers* Deep Exterior Tone* Little interior resonance* Mandrel Bent Aluminized tubing* Stock Factory Style Hangers For Ease Of Installation* Fits 05-’06 Corvette coupe and convertible (not Z06)* Four-inch embossed rolled edged double walled stainless tips The Flowmaster Sound is the true tone of American muscle and performance. Available in a wide range of domestic and import applications for automobiles and trucks. Flowmaster mufflers produce more power than OEM and competitive aftermarket products. What makes Flowmaster so unique is that its performance improvement is paired with our unique exhaust tones. The “Flowmaster Sound” is offered in many different tones depending upon the muffler series. From the deep, aggressive tone of the 40 Series to a quiet and subtle, but unmistakably rich Flowmaster tone of the 70 Series, you will find the right application of performance and exhaust sound you want. Application: 2005, 2006, 2007, 2008 C6 Corvette
  • CORVETTE C6 EXHAUST BILLY BOAT B&B FUSION FCOR-0464

    C6 Corvette Exhaust Billy Boat B&B Fusion FCOR-0464

    Regular Price: $2,016.52

    Special Price $1,916.52

    Free Shipping
    Please note: This item is sold at our rock bottom price, the best price in the world and we cannot discount further. What is bi-modal exhaust? The Corvette Fusion Exhaust is a bi-modal exhaust system, meaning it has two passages, or modes, that the exhaust can travel through the muffler. Each of the mufflers has two outlets, with one side having a butterfly type valve which allows the exhaust flow to be shut off, regulating which side of the muffler the flows exhaust. One side of the muffler is the quiet side, and one side is the loud side. The quiet side is a smaller, muffled and chambered tube, while the loud side is 3" tubing straight through. How loud is the Corvette Fusion Exhaust?Through our development and customer feedback, Billy Boat has shortened the muffler for 2008, making the loud side of the muffler louder, which results in a tone similar to the famous Bullet system. In the closed position the Fusion tone would be slightly louder than the standard Route 66 exhaust system (good for highway cruising with minimal to no exhaust drone). What controls the valves in the Corvette Fusion Exhaust?The Fusion exhaust butterfly system is controlled by a vacuum valve, which was built and developed completely in-house at B&B. On the Corvette Z06 and the 2008 C6 Corvette with the NPP option, this valve is controlled by the Corvette's ECU. The valve opens based on RPM and throttle position. The problem is the factory exhaust is very quiet, even with the valve open. Billy Boat's expertise here is getting the tone right for your Corvette, and they think they have nailed this one. Even in the closed position, the tone is deeper, louder, and more aggressive. Open the valves and the Fusion's overall volume and tone increases to the point heads will turn when you drive up. What if I have a standard C6 Corvette?Not everybody has a Corvette Z06 or 2008-2013 with NPP, right? Billy Boat Performance Exhaust has spent months developing a stand-alone kit which allows any C6 to take advantage of the bi-modal system. The kit comes complete with all the wiring, mild-to-wild switch, vacuum line, vacuum actuator, and vacuum switch needed for installation. We have used the engine as the vacuum source (it is the same port the factory uses for the NPP) and the installation is simple and straightforward. Is the system 2 1/2" or 3"?On the Corvette Z06, the Z06 BB Fusion System exhaust system is 3", while on the C6 Corvette it is 2 1/2". We do have an x-pipe available for both systems, and the standard C6 can be ordered in the 3" diameter to make a complete 3" system. Will the Corvette Fusion Exhaust bolt up to my stock H pipe or my stock headers?Each part of the Fusion Exhaust system will fit a stock H-pipe or the stock headers. The parts can be mixed and matched (rear exhaust, x-pipe, and long tube headers) For best performance it is recommended to use the long tube headers, the 3" x-pipe, and the 3" Corvette Fusion. Billy Boat has combined the best of the Bullet exhaust with the best new technology to give you the Fusion System for your Corvette. The muffler tips are double walled, 4" round or 4.5" oval. The entire system comes completely polished and the result is a truly spectacular look and sound that gives this high-performance sports car the look and aggressive sound which will have heads turning everywhere you go. All B&B products are precision built in rugged fixtures, completely TIG welded, and are a direct replacement for stock exhaust components and include all hardware and gaskets. No machining, no cutting, and no welding means easy installation. We provide the perfect mix of performance, sound, and style your Corvette . Each Billy Boat Performance Exhaust system is backed by a lifetime warranty against rust, corrosion or burn through and 2 full years against defects in materials or workmanship. This exhaust system is available with either Quad Round or Quad Oval exhaust tips. Tips are available with your choice of polished Stainless Steel tips--which are finished to a gorgeous mirror-like shine, and new Black Satin Ceramic Coated Exhaust tips--for a more unique and aggressive modified appearance. Application: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette Southern Car Parts was the Sponsor of the Chad Boat #84 Toyota for the Chicago race back in 2013... We've got a great business relationship with Billy Boat Exhaust and Southern Car Parts knows the B&B Product line better than anyone in the business. We stock many C5, C6, and C7 exhaust systems.  
  • C6 Corvette Exhaust MagnaFlow Axleback 15886

    C6 Corvette Exhaust MagnaFlow Axleback 15886

    $1,998.00
    Free Shipping
    Wanna give your Corvette a little more growl and performance? One of the easiest bolt-on upgrades is to replace the Corvette Exhaust System with something more free-flowing. You will see performance gains on the dyno and the sound will be music to your ears. The MagnaFlow C6 Corvette Performance Exhaust System is made with 100% mandrel bent stainless steel with beautiful 4" quad tips. All Stainless Steel, Mandrel-Bent, Axle-back Exhaust System With Polished Stainless Steel Tips Magnaflow Mufflers are the straight Wide Open performance muffler with smooth deep tones The Magnaflow muffler was developed to be a superior product line of performance mufflers. Wide Open performance Magnaflow mufflers outflow OEM chamber style mufflers by as much as 16%. This reduces engine heat and backpressure and improves exhaust scavenging from the combustion chamber The Magnaflow muffler minimizes the power robbing effects of the OEM system to restore torque and horsepower to the engine   Application: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette

26 Item(s)

Grid List

Set Descending Direction
A new Corvette exhaust system will help you get more out of your vehicle. Aftermarket exhaust systems increase airflow, providing greater torque and horsepower. They can even enhance exhaust tone. Whether you're looking for a deep, powerful exhaust tone or one that is clean and precise, Southern Car Parts can help you find the C6 exhaust system to deliver the right results for you.

Adding a free-flowing exhaust system in a popular modification for Corvette C6 owners. With an Akrapovic or Borla exhaust, you can enjoy an unprecedented driving experience.

Our Corvette exhaust systems will give your vehicle an additional 10 to 12 horsepower too, and they are always installed behind the catalytic converter. This means youโ€™ll never have to worry about passing emissions.

Our 2005-2008 C6 Corvette exhaust systems consist of high-grade materials for exceptional quality. Plus, our products come from top brands to guarantee you can reap the benefits of our exhaust parts and accessories for years to come.

Corvette Borla Exhaust

Explore Dozens of Outstanding Corvette Exhaust Systems from Southern Car Parts

Finding a 2005-2008 C6 Corvette exhaust can be an uphill climb, particularly for those who are searching for exhaust parts and accessories for the first time. Fortunately, Southern Car Parts simplifies the process of locating and buying Corvette exhaust components.

For years, we have served as a leading supplier for all of your 2005, 2006, 2007 and 2008 Corvette exhaust parts and accessories. We constantly go above and beyond the call of duty to update our 2005-2008 Corvette exhaust inventory. Also, we only sell the latest and greatest products, so you should have no trouble discovering the right products for your vehicle.

In addition, Southern Car Parts stands behind the Corvette exhaust systems we sell. Our products are backed by our team of automotive experts who are happy to respond to any questions. That way, if you need assistance during your search for 2005-2008 Corvette exhaust parts and accessories, we can help you at any time.

Buy an Exhaust System for Your 2005-2008 Corvette Today

Ready to upgrade your 2005-2008 Corvette exhaust system? Select Southern Car Parts, and you can enjoy an unparalleled shopping experience.

Southern Car Parts is a leader for all 2005-2008 Corvette exhaust components. Whenever you shop with us, you are sure to find the ideal C6 Corvette parts and accessories at budget-friendly prices.

Browse our large selection of 2005-2008 Corvette exhaust parts and accessories today.

Corvette C6 2005-2008

Minimal Price: $ 26.47 26.47

X