Corvette C6 Z06 GT Brembo Monobloc Replacement Rotors

These are the Corvette C6 Z06 (2006-present Z06 only) Brembo GT Monobloc replacement front rotors. Available in slotted or drilled, they are the exact replacement rotors needed for your Corvette C6 Z06 Brembo Monobloc kit (please note these are not OEM rotors that will NOT fit on the OEM Z06 brakes ). You need to of upgraded your brakes to the Brembo Corvette Z06 Monobloc GT Kit for these rotors to be applicable on your Corvette C6 Z06.

Please Read: The 2-piece rotor assemblies in Brembo GT systems are made up of three primary components; disc (outer ring), disc hardware and bell or hat (black aluminum center portion).
 
Discs and disc hardware are standard wear items. Bells/Hats, however, may be re-used if properly inspected and there are no visible signs of wear. The life of these components will vary based on the vehicle, driver and driving conditions.
 
Discs should be replaced if any of the following occur: Disc exceeds minimum thickness, causes steering wheel feedback (due to uneven pad transfer) or shows signs of excessive cracking.  The minimum thickness is stamped on the edge of the disc. (See image 3)
 
Disc hardware must be replaced each time a disc is replaced. If hardware is re-used and out of tolerance, it may dramatically accelerate the wear of both the disc and bell. 
 
Bells should be inspected for wear each time a disc is replaced. The bell can typically be re-used unless there are signs of visible wear. Re-using a bell that is out of tolerance will dramatically accelerate the wear of the disc and the disc hardware.  Worn bells may prevent the hardware from working properly and cause the disc to rattle.

Our Brembo Corvette Rotor Kits come complete with all hardware and rotor rings. Does not include the center hat/bell.


This is for the front pair of rotors rings (left and right) and is sized as 365mm x 34mm 2 Piece Rotors or 380MM complete with all mounting hardware (without the center bell) for the Brembo GT Corvette Z06 kit. Please ensure your sizing and part number are correct before ordering. These rotors are compatible with Brembo kits Corvette C6 Z06 Brembo GT 1N1.8502A and 1N2.8502A