MagnaFlow has done it once again with the Race Series 19209 exhaust system for your 2015-2017 Challenger R/T.
The MagnaFlow Race Series Exhaust Systems are designed for the ultimate in high performance and the loudest most aggressive racecar sound possible. Race Series exhaust systems remove the restrictive OEM muffler to virtually eliminate backpressure and maximize exhaust flow. The Race Series is recommended for those seeking maximum performance, reduced mass, and a loud aggressive racecar exhaust tone that demands attention.
MagnaFlow's Challenger Performance Exhaust systems are rugged, reliable, built to last, and their legendary straight-through, wide-open, stainless steel mufflers provide the smooth, deep tone they are famous for. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards.. Manufactured of high quality, mandrel bent, 2.5" stainless steel tubing, this is a powerful, durable system which will fit and install easily on any Challenger R/T out there. A fantastic upgrade for your vehicle!
Application: 2015, 2016, 2017, 2018, 2019 Dodge Challenger R/T
Street Series Performance Magnaflow Exhaust 15592 for the 2011+ Mustang V6
This Competition Series exhaust system for the 3.7L V6 Mustang provides fantastic exhaust flow benefits. A greater airflow through the exhaust means more HP and Torque for your Mustang across the RPM range, as well as a much improved exhaust tone and volume. Designed to give the Mustang a boost in street performance and drivability, this system is very powerful and very aggressive. If you want a less aggressive exhaust, be sure to check out the Magnaflow Street Series Exhaust.
4 x 9 x 14in. Dual Round Mufflers, 2.5in. Competition Series, Dual 4in. Polished Tips, DUAL SPLIT REAR EXIT
The MagnaFlow Race Series Exhaust Systems are designed for the ultimate in high performance and the loudest most aggressive racecar sound possible. Race Series exhaust systems remove the restrictive OEM muffler to virtually eliminate backpressure and maximize exhaust flow. The Race Series is recommended for those seeking maximum performance, reduced mass, and a loud aggressive racecar exhaust tone that demands attention.
MagnaFlow's C6 Corvette Performance Exhaust systems are rugged, reliable, built to last, and their legendary straight-through, wide-open, stainless steel mufflers provide the smooth, deep tone they are famous for. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards.
These exhaust kits and cat-back systems feature mandrel bends to ensure there are no flow restrictions and OEM-style barbed hangers for easy installation. All of MagnaFlow's exhaust systems are factory-checked for proper fit and dyno-tested to verify performance gains. All necessary installation hardware is included and the entire system is backed by MagnaFlow's lifetime warranty.
Fits 2009-2011 6.2 Liter LS3
Additional Information
Tubing Outer Diameter: 2.5in.
System Type: Cat-Back
Tip Outer Diameter: 4 in.
Tip Quantity: 4
Single or Dual: Dual
Exit Style: Split Rear
Made in the U.S.A.
All Mandrel Bent Tubing
409 Stainless Steel Construction
Lifetime Warranty
Application: 2009, 2010, 2011 C6 Corvette LS3 engine
The 2017 Ford Raptor Magnaflow SYS Cat-Black 3.5L Dual 3" Black Tips are available for you to customize your new Raptor.
MagnaFlow Cat-Back Features and Benefits: - Direct-fit, bolt-on upgrade to OE factory exhaust - Constructed from 409 stainless steel mandrel-bent piping - Will increase overall horsepower, torque, and performance - Provides a loud, throaty rumble as you drive down the street - Includes high-quality 5" polished stainless steel tips- Fits both the SuperCab and SuperCrew Configurations- Proudly constructed in the U.S.A.
iYour new Raptor is already a beast, but this MF series exhaust will more horsepower and torque to the engine immediately. Made in the USA, MagnaFlow has engineered this exhaust system to balance interior and exterior noise levels for a better drive.
APPLICATION: 2017 Ford F-150 Raptor
Made in the USA and engineered to last, for those seeking increased performance and better economy, MagnaFlow Street Series Performance Exhaust systems deliver the smooth deep sound you want and the wide-open performance power you need.
MagnaFlow's C6 Corvette Performance Exhaust systems are rugged, reliable, built to last, and their legendary straight-through, wide-open, stainless steel mufflers provide the smooth, deep tone they are famous for. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards.
These exhaust kits and cat-back systems feature mandrel bends to ensure there are no flow restrictions and OEM-style barbed hangers for easy installation. All of MagnaFlow's exhaust systems are factory-checked for proper fit and dyno-tested to verify performance gains. All necessary installation hardware is included and the entire system is backed by MagnaFlow's lifetime warranty.
Additional Information
Tubing Outer Diameter: 2.5in.
System Type: Cat-Back
Tip Outer Diameter: 4 in.
Tip Quantity: 4
Single or Dual: Dual
Exit Style: Split Rear
Product Name: Stainless Cat-Back System Performance Exhaust
Material: 100% Stainless Steel
Notes: 2.5in System, Cat-Back, Street Series, DUAL SPLIT rear exit, quad 4 inch exhaust tip
Made in the U.S.A.
All Mandrel Bent Tubing
409 Stainless Steel Construction
Lifetime Warranty
Application: 2012, 2013 C6 Corvette LS3
Adding a more aggressive sounding exhaust system to your Camaro is easy with a Magnaflow Street Series cat-back exhaust. MagnaFlow Street Series Performance Exhaust systems deliver the smooth deep sound you want and the wide-open performance power you need. Our exhaust systems feature straight-through flow designs for the ultimate in unrestricted horsepower and torque for big power while maintaining exhaust efficiency. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards.
• All Mandrel Bent Tubing
• 409 Stainless Steel Construction
• Increased Horsepower and Torque
• Lifetime Construction Warranty
• Made in the USA
Application: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 Camaro
This MagnaFlow system is rugged, stylish, and powerful just like your Challenger! Available in both dual and single exit packages, this exhaust system will bring a noticable performance upgrade over the stock system for any Challenger out there. Dyno tested to ensure HP and Torque boosts across the RPM range, this system also provides fantastic exhaust tone and volume improvements, noticable to both the driver and any onlooker who sees this great car go by. Manufactured of high quality, mandrel bent, 2.5" stainless steel tubing, this is a powerful, durable system which will fit and install easily on any Challenger out there. A fantastic upgrade for your vehicle!
Application: 2009, 2010, 20111, 2012, 2013, 2014 Dodge Challenger 3.5L
Adding a more aggressive sounding exhaust system to your Camaro is easy with a Magnaflow Competition Series axel-back exhaust. The MagnaFlow Competition Series Exhaust Systems are designed for the ultimate in high performance and the loudest most aggressive racecar sound possible. The Competition Series is recommended for those seeking maximum performance, reduced mass, and a louder more aggressive racecar exhaust tone that demands attention everywhere you go.
These systems may not comply with all local or federal noise requirements.
• All Mandrel Bent Tubing
• 409 Stainless Steel Construction
• Increased Horsepower and Torque
• Lifetime Construction Warranty
• Made in the USA
Application: 2016, 2017, 2018, 2019, 2020 Camaro
These MagnaFlow performance exhaust systems are rugged, powerful, and stylish, just like the Camaro ZL1 you drive! These exhaust kits feature OEM-style barbed hangers for easy installation, 3" mandrel bent stainless steel tubing to prevent exhaust flow restrictions, and MagnaFlow's legendary straight-through, wide-open, stainless steel muffler to provide a smooth, deep tone outside of the vehicle. This system is the most aggressive MagnaFlow system for the Camaro ZL1, and will provide more performance boosts as well as an even louder exhaust note and tone. Of course, all of this comes at price also and the cabin drone inside of the Camaro ZL1 with this system installed will not be favorable to some drivers, therefore we only recommend this exhaust system for those high-performance competition Camaro ZL1 builds. All MagnaFlow exhaust systems are factory-checked for proper fitment and dyno-tested to verify performance gains in HP and Torque across the RPM Range for the 2012-2015 Chevy Camaro ZL1. These kits include all necessary installation hardware and some include a polished, stainless steel exhaust tip. They're backed by MagnaFlow's lifetime warranty, so you will be able to enjoy a rich, powerful sound for your Camaro's entire life!
Adding a more aggressive sounding exhaust system to your Camaro is easy with a Magnaflow Race Series axel-back exhaust. The MagnaFlow Race Series Exhaust Systems are designed for the ultimate in high performance and the loudest most aggressive racecar sound possible. Race Series exhaust systems remove the restrictive OEM muffler to virtually eliminate backpressure and maximize exhaust flow. The Race Series is recommended for those seeking maximum performance, reduced mass, and a louder more aggressive racecar exhaust tone that demands attention everywhere you go.
These systems may not comply with all local or federal noise requirements.
• All Mandrel Bent Tubing
• 409 Stainless Steel Construction
• Increased Horsepower and Torque
• Lifetime Construction Warranty
• Made in the USA
Application: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 Camaro
Made in the USA and engineered to last, for those seeking increased performance and better economy, MagnaFlow Street Series Performance This 2015-2017 Ford Mustang Ecoboost Exhaust system deliver the smooth deep sound you want and the wide-open performance power you need. Our exhaust systems feature straight-through flow designs for the ultimate in unrestricted horsepower and torque for big power while maintaining exhaust efficiency. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards.
•Made in the U.S.A.
•All Mandrel Bent Tubing
•409 Stainless Steel Construction
•Increased Horsepower and Torque
•Lifetime Construction Warranty
Features and Benefits:
- Made From 2-1/2" Stainless Steel Mandrel Bent Tubing
- Proven to Increase both Horsepower and Torque
- 4-1/2" Polished Stainless Steel Tips
- Deep Street Friendly Exhaust Note
- All Welded Construction and Built To Last
- Easy Bolt-In Installation
Application: 2015, 2016, 2017 Ford Mustang
Looking for a little more sound out of your 2016-2023 Camaro V6? Magnaflow has the answer with their axle back system that really makes your Camaro sounds like it should!
Southern Car Parts is an Authorized Retailer of MagnaFlow products. MagnaFlow’s Lifetime Warranty will only be honored on product purchased through an Authorized Retailer. Nothing performs better, looks better, or sounds better than MagnaFlow Performance Exhaust. The MagnaFlow Research and Development Team invests many hours to ensure their products stay competitive and perform the way they should. MagnaFlow systems feature straight-through flow designs for the ultimate in unrestricted horsepower and torque for big power while maintaining exhaust efficiency. The internal MagnaFlow muffler is designed of stainless steel perforated core, stainless steel wool, and an acoustically absorbent material -- superior to fiberglass (which many other manufacturers use). No baffles, chambers, or louvers. No restrictions at all, just straight-through, wide-open performance with a smooth, deep tone, and each MagnaFlow stainless muffler has a highly polished mirror finish for a show car look. Our systems give a 20% reduction in bends over your O.E.M. system to provide the power you demand.
Most MagnaFlow systems we offer come in three flavors.
Street - For those seeking increased performance and better economy, MagnaFlow Street Series Performance Exhaust systems deliver the smooth deep sound you want and the wide-open performance power you need for the ultimate in unrestricted horsepower and torque for big power while maintaining exhaust efficiency. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards.
Competition - The MagnaFlow Competition Series Exhaust Systems are designed for those seeking maximum performance, reduced mass and an aggressive exhaust note that demands attention.
Race - The MagnaFlow Race Series Exhaust Systems are designed for the ultimate in high performance and the loudest most aggressive racecar sound possible. Race Series exhaust systems remove the restrictive OEM muffler to virtually eliminate backpressure and maximize exhaust flow. The Race Series is recommended for those seeking maximum performance, reduced mass, and a loud aggressive racecar exhaust tone that demands attention.
Application: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 Camaro
Competition Series Axle-Back Magnaflow Performance Exhaust (#15594) for the 2011+ Mustang V8 5.0L
This Axle-Back Exhaust System for the 2011+ Mustang V8 5.0 provides an increased exhaust flow, and improved performance and exhaust tone as result. This system is the axle-back only, without mufflers, and will provide an aggressive performance/tone bonus. For greater bonuses and a more aggressive exhaust, look at the Competition Series Cat-Back Exhaust. If you want a more tame exhaust, look at the Street Series Axle-Back.
Without Mufflers, AXLE BACK, 3in. Competition Series, Dual 4in. Polished Tips, DUAL SPLIT REAR EXIT
MagnaFlow constructs high quality stainless steel exhausts for the Nissan 350Z designed to increase visual styling, vehicle sound, and free up the vehicle for increased Horsepower and performance. Mandrel bent and built to last, this exhaust system is a fantastic upgrade for any 350Z. MagnaFlow has dyno-tested all of their systems as well to guarantee peak HP and Torque gains while ensuring that they deliver their full, deep tones across the RPM range. Couple all of this with the MagnaFlow factory life-time warranty, and you can't go wrong buying this exhaust system as a fantastic performance and visual modification piece for any 350Z out there!
These MagnaFlow performance exhaust systems are rugged, powerful, and stylish, just like the Camaro SS you drive! These exhaust kits feature OEM-style barbed hangers for easy installation, 2.5" mandrel bent stainless steel tubing to prevent exhaust flow restrictions, and MagnaFlow's legendary straight-through, wide-open, stainless steel muffler to provide a smooth, deep tone outside of the vehicle. This system is also more aggressive than the MagnaFlow Street Series, and will provide more performance boosts as well as an even louder exhaust note and tone. Of course, to the more casual driver, this will result in some cabin drone from the exhaust and is not favorable for all applications, and is recommended only for high performance Camaro SS applications. All MagnaFlow exhaust systems are factory-checked for proper fitment and dyno-tested to verify performance gains in HP and Torque across the RPM Range for the 2011-2013 Chevy Camaro SS. These kits include all necessary installation hardware and some include a polished, stainless steel exhaust tip. They're backed by MagnaFlow's lifetime warranty, so you will be able to enjoy a rich, powerful sound for your Camaro's entire life!
Competition Series Cat-Back Magnaflow Performance Exhaust (#15590) for the 2011+ Mustang 5.0L V8
If you're looking for power, performance, and a very aggressive exhaust tone for your 2011+ Mustang GT, look no further than this dual-exit Magnaflow system. Manufactured with quality stainless steel, this system is both durable and powerful, and will provide HP and Torque gains across the RPM range. Coupling those benefits with the traditional Magnaflow tonal quality and volume, means you have an exhaust with both performance benefits and an indistinguishable exhaust tone. A great modification piece that any Mustang GT owner would be happy to have.This system is much more aggressive than the Mustang V8 Street Series Exhaust.
5in. Round Dual Mufflers, 3in. Competition Series, Dual 4in. Polished Tips, DUAL SPLIT REAR EXIT
This 3" exhaust system from MagnaFlow for the Chevrolet Camaro is a fantastic Cat-Back modification exhaust system with cross pipe, designed and built with the highest quality mandrel bent stainless steel and dyno-tested to guarantee peak HP and Torque performance gains. These systems are powerful, and provide a wonderful volume and tone improvement for the exhaust note, without being too loud or aggressive, thus minimizing cabin drone. Backed by MagnaFlow's lifetime warranty, no Camaro owner can go wrong with this fantastic exhaust system!
Made in the USA and engineered to last, for those seeking increased performance and better economy, MagnaFlow Street Series Performance Exhaust systems deliver the smooth deep sound you want and the wide-open performance power you need.
MagnaFlow's Camaro SS Performance Exhaust systems are rugged, reliable, built to last, and their legendary straight-through, wide-open, stainless steel mufflers provide the smooth, deep tone they are famous for. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards.
Axle-Back Street Series Magnaflow Performance Exhaust (#15595) for the 2011+ Mustang V6
This Axle-Back Exhaust System for the 2011+ Mustang V6 provides an increased exhaust flow, and improved performance and exhaust tone as result. This system is the axle-back only, with mufflers, and will provide a performance/tone bonus, but only a more tame one. For greater bonuses and a more aggressive exhaust, look at the Competition Series Axle-Back or the Street Series Cat-Back Exhaust.
4 x 9 x 14in. Dual Mufflers, AXLE BACK, 2.5in. Street Series, Dual 4in. Polished Tips, DUAL SPLIT REAR EXIT
Made in the USA and engineered to last, for those seeking increased performance and better economy, MagnaFlow Street Series Performance Exhaust systems deliver the smooth deep sound you want and the wide-open performance power you need.
MagnaFlow's C6 Corvette Performance Exhaust systems are rugged, reliable, built to last, and their legendary straight-through, wide-open, stainless steel mufflers provide the smooth, deep tone they are famous for. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards.
These exhaust kits and cat-back systems feature mandrel bends to ensure there are no flow restrictions and OEM-style barbed hangers for easy installation. All of MagnaFlow's exhaust systems are factory-checked for proper fit and dyno-tested to verify performance gains. All necessary installation hardware is included and the entire system is backed by MagnaFlow's lifetime warranty.
Fits 2009-2013 LS3 and 2006-2013 LS7
Additional Information
Tubing Outer Diameter: 3.0 in.
System Type: Cat-Back
Tip Outer Diameter: 4 in.
Tip Quantity: 2
Single or Dual: Dual
Exit Style: Split Rear
Material: 100% Stainless Steel
Made in the U.S.A.
All Mandrel Bent Tubing
409 Stainless Steel Construction
Lifetime Warranty
Application: 2009, 2010, 2011, 2012, 2013 C6 Corvette LS3 and LS7
If you are looking for the most aggressive sounding exhaust for your C7 Corvette look no further than this 2014-2019 C7 Corvette Magnaflow Competition Series Axel-Back Exhaust. The MagnaFlow Competition Series Exhaust Systems are designed for those seeking maximum performance, reduced mass and an aggressive exhaust note that demands attention. The Carbon Fiber tips and High Temp Satin Titanium Coating enhance the impact of the system with a unique performance style. The High Temp Satin Titanium Coating also provides an additional protection layer to the all 409 Stainless Steel Construction. These systems may not comply with all local or federal noise requirements.
• All Mandrel Bent Tubing
• 409 Stainless Steel Construction with High Temp Satin Titanium Coating
• Carbon Fiber Tips
• Increased Horsepower and Torque
• Made in the USA"
Applications: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette Stingray, Z06, Grand Sport
The 2017 Ford Raptor Magnaflow SYS Cat-Black 3.5L Dual 3 inch Tips are available for you to customize your new Raptor.
MagnaFlow Cat-Back Features and Benefits: - Direct-fit, bolt-on upgrade to OE factory exhaust - Constructed from 409 stainless steel mandrel-bent piping - Will increase overall horsepower, torque and performance - Provides a loud, throaty rumble as you drive down the street - Includes high-quality 5" polished stainless steel tips- Fits both the SuperCab and SuperCrew Configurations- Proudly constructed in the U.S.A.
Your new Raptor is already a beast, but this MF series exhaust will more horsepower and torque to the engine immediately. Made in the USA, MagnaFlow has engineered this exhaust system to balance interior and exterior noise levels for a better drive.
APPLICATION: 2017 Ford F-150 Raptor
This MagnaFlow system is rugged, stylish, and powerful just like your Challenger R/T Hemi! Available in both dual and single exit packages, this exhaust system will bring a noticable performance upgrade over the stock system for any Challenger out there. Dyno tested to ensure HP and Torque boosts across the RPM range, this system also provides fantastic exhaust tone and volume improvements, noticable to both the driver and any onlooker who sees this great car go by. Manufactured of high quality, mandrel bent, 2.5" stainless steel tubing, this is a powerful, durable system which will fit and install easily on any Challenger R/T out there. A fantastic upgrade for your vehicle!
Available in both Street and Competition exhaust systems. The major difference between the two in construction being the lack of mufflers on the Competition system, which results directly in more performance gains and louder exhaust tones and notes. Because of this added aggressiveness though, there is going to also come with it added cabin drone from the exhaust, and therefore it is not recommended for more casual drivers, who would be better suited looking to the Street series exhaust.
Application: 2009, 2010, 2011, 2012, 2013, 2014 Dodge Challenger R/T
Adding a more aggressive sounding exhaust system to your Camaro is easy with a Magnaflow Competition Series axel-back exhaust. The MagnaFlow Competition Series Exhaust Systems are designed for the ultimate in high performance and the loudest most aggressive racecar sound possible. The Competition Series is recommended for those seeking maximum performance, reduced mass, and a louder more aggressive racecar exhaust tone that demands attention everywhere you go.
These systems may not comply with all local or federal noise requirements.
• All Mandrel Bent Tubing
• 409 Stainless Steel Construction
• Increased Horsepower and Torque
• Lifetime Construction Warranty
• Made in the USA
Application: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 Camaro
2010 2011 2012 2013 2014 F150 Raptor 6.2L MagnaFlow Cat-back Exhaust System Side Exit 15588
This Magnaflow Ford Raptor exhaust system is Made in the USA and engineered to last, for those seeking increased performance and better economy, MagnaFlow MF Series Performance Exhaust systems deliver the smooth deep sound you want and the wide-open performance power you need. Our exhaust systems feature straight-through flow designs for the ultimate in unrestricted horsepower and torque for big power while maintaining exhaust efficiency. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards.
•Made in the U.S.A.
•All Mandrel Bent Tubing
•409 Stainless Steel Construction
•Increased Horsepower and Torque
•Lifetime Construction Warranty
Give your Ford Raptor the sound and performance is deserves. Magnaflow is known worldwide as the leader in sound and performance with many truck owners. Your Raptor will get the best of both worlds with this Magnaflow exhaust system #15588.
Adding a more aggressive sounding exhaust system to your Camaro is easy with a Magnaflow Competition Series axel-back exhaust. The MagnaFlow Competition Series Exhaust Systems are designed for the ultimate in high performance and the loudest most aggressive racecar sound possible. The Race Series is recommended for those seeking maximum performance, reduced mass, and a louder more aggressive racecar exhaust tone that demands attention everywhere you go.
These systems may not comply with all local or federal noise requirements.
• All Mandrel Bent Tubing
• 409 Stainless Steel Construction
• Increased Horsepower and Torque
• Lifetime Construction Warranty
• Made in the USA
Application: 2016, 2017, 2018, 2019, 2020 Camaro
Magnaflow is hands down one of the top exhaust manufacturers in the world. When it comes to putting a new exhaust system on your 6th Generation V6 Camaro you have got to give the Magnaflow 19332 Competition series a serious consideration.Nothing performs better, looks better, or sounds better than MagnaFlow Performance Exhaust. The MagnaFlow Research and Development Team invests many hours to ensure their products stay competitive and perform the way they should. MagnaFlow systems feature straight-through flow designs for the ultimate in unrestricted horsepower and torque for big power while maintaining exhaust efficiency. The internal MagnaFlow muffler is designed of stainless steel perforated core, stainless steel wool, and an acoustical absorbent material -- superior to fiberglass (which many other manufacturers use). No baffles, chambers, or louvers. No restrictions at all, just straight-through, wide-open performance with a smooth, deep tone, and each MagnaFlow stainless muffler has a highly polished mirror finish for a show car look. Our systems give a 20% reduction in bends over your O.E.M. system to provide the power you demand.
Application: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 Camaro
If you want to improve the sound and performance of your 2008-2022 Dodge Challenger, an exhaust system from Southern Car Parts is a perfect place to start. This Magnaflow exhaust system provides your Challenger extra breathability through the exhaust, for increased HP and Torque numbers across the RPM range, as well as an improved, louder, and more aggressive exhaust tone. This system does not include tips, and requires re-using the OEM Challenger tips.
Application: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020, 2021, 2022 Dodge Challenger SRT8
This exhaust, designed and built by MagnaFlow of the highest quality Mandrel bent Stainless Steel, uses wider piping (3" as opposed 2.5") than their other system for a more powerful and aggressive application. By opening itself up even more, this MagnaFlow system really allows the Nissan 350Z exhaust to breathe for large increases to horsepower and torque and a much louder and more powerful tone. Of course, this will also increase cabin noise, and is only recommended for those Nissan 350Z owners who desire a very aggressive vehicle application. Equipped with dual 4" tips, this exhaust is also a fantastic visual modification sure to grab even more attention when installed on any Nissan 350Z!
Made in the USA and engineered to last, for those seeking increased performance and better economy, MagnaFlow Street Series Performance Exhaust systems deliver the smooth deep sound you want and the wide-open performance power you need. Our exhaust systems feature straight-through flow designs for the ultimate in unrestricted horsepower and torque for big power while maintaining exhaust efficiency. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards.
All Mandrel Bent Tubing
• 409 Stainless Steel Construction
• Increased Horsepower and Torque
• Lifetime Construction Warranty
• Made in USA
For Vehicles with Factory Quad Exit Exhaust
Application: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 Camaro
These MagnaFlow performance exhaust systems are rugged, powerful, and stylish, just like the Camaro you drive! These exhaust kits feature OEM-style barbed hangers for easy installation, 2.5" mandrel bent stainless steel tubing to prevent exhaust flow restrictions, and MagnaFlow's legendary straight-through, wide-open, stainless steel muffler to provide a smooth, deep tone outside of the vehicle. All MagnaFlow exhaust systems are factory-checked for proper fitment and dyno-tested to verify performance gains in HP and Torque across the RPM Range for the 2011-2013 Chevy Camaro. These kits include all necessary installation hardware and some include a polished, stainless steel exhaust tip. They're backed by MagnaFlow's lifetime warranty, so you will be able to enjoy a rich, powerful sound for your Camaro's entire life!
Axle-Back Competition Series Magnaflow Performance Exhaust (#15596) for the 2011+ Mustang V6
This Axle-Back Exhaust System for the 2011+ Mustang V6 provides an increased exhaust flow, and improved performance and exhaust tone as result. This system is the axle-back only, without mufflers, and will provide a performance/tone bonus, but only a slightly more aggressive one than the Street Series Axle-Back Exhaust. For greater bonuses and a more aggressive exhaust, look at the Street Series Cat-Back Exhaust or the Competition Series Cat-Back Exhaust.
Without Mufflers, AXLE BACK, 2.5in. Competition Series, Dual 4in. Polished Tips, DUAL SPLIT REAR EXIT
Upgrade your Corvette exhaust with a MagnaFlow Corvette C5 Cat-Back Performance Exhaust System. Includes mufflers and over the axle pipes. This is a beautiful system that will bring your Corvette C5 to life with a thunderous growl.This is the Magnaflow XL Series with Quad tips 4" and 2.5" tubing. Free Shipping All Stainless Steel, Mandrel-Bent, Cat-Back Exhaust System With Polished Stainless Steel Tips Magnaflow Mufflers are the straight Wide Open performance muffler with smooth deep tones The Magnaflow muffler was developed to be a superior product line of performance mufflers. Wide Open performance Magnaflow mufflers outflow OEM chamber style mufflers by as much as 16%. This reduces engine heat and backpressure and improves exhaust scavenging from the combustion chamber The Magnaflow muffler minimizes the power robbing effects of the OEM system to restore torque and horsepower to the engine
Material: 100% Stainless Steel Tubing O.D. Size: 2.5in. System Type: Cat-Back TIP O.D. Size: 4in. TIP Quantity: 4 Single/Dual: Dual Exit Position: Rear Exit
Features and Benefits: Lifetime Warranty, Dyno Tested And Proven To Make Power, Performance Gains In Horsepower And Torque, Great Sound -Has A Smooth; Deep Tone, Easy To Install, Mandrel-Bent. All Welded. Built To Last.
Application: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 C5 Corvette
The MagnaFlow Race Series Exhaust Systems are designed for the ultimate in high performance and the loudest most aggressive racecar sound possible. Race Series exhaust systems remove the restrictive OEM muffler to virtually eliminate backpressure and maximize exhaust flow. The Race Series is recommended for those seeking maximum performance, reduced mass, and a loud aggressive racecar exhaust tone that demands attention.
MagnaFlow's C6 Corvette Performance Exhaust systems are rugged, reliable, built to last, and their legendary straight-through, wide-open, stainless steel mufflers provide the smooth, deep tone they are famous for. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards.
These exhaust kits and cat-back systems feature mandrel bends to ensure there are no flow restrictions and OEM-style barbed hangers for easy installation. All of MagnaFlow's exhaust systems are factory-checked for proper fit and dyno-tested to verify performance gains. All necessary installation hardware is included and the entire system is backed by MagnaFlow's lifetime warranty.
Fits 2006-2013 7.0 Liter LS7 and 2010-2013 6.2 Liter LS3
Additional Information
Tubing Outer Diameter: 3.0 in.
System Type: Cat-Back
Tip Outer Diameter: 4 in.
Tip Quantity: 4
Single or Dual: Dual
Exit Style: Split Rear
Material: 100% Stainless Steel
Made in the U.S.A.
All Mandrel Bent Tubing
409 Stainless Steel Construction
Lifetime Warranty
Application: 2009, 2010, 2011, 2012, 2013 C6 Corvette LS3 and LS7
MagnaFlow's C7 Corvette Performance Exhaust systems are rugged, reliable, built to last, and their legendary straight-through, wide-open, stainless steel mufflers provide the smooth, deep tone they are famous for. These exhaust kits and cat-back systems feature mandrel bends to ensure there are no flow restrictions and OEM-style barbed hangers for easy installation. All of MagnaFlow's exhaust systems are factory-checked for proper fit and dyno-tested to verify performance gains. All necessary installation hardware is included and the entire system is backed by MagnaFlow's lifetime warranty.
Made in the USA and engineered to last, for those seeking increased performance and better economy, MagnaFlow Street Series Performance Exhaust systems deliver the smooth deep sound you want and the wide-open performance power you need. Our exhaust systems feature straight-through flow designs for the ultimate in unrestricted horsepower and torque for big power while maintaining exhaust efficiency. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards.
•Made in the U.S.A.
•All Mandrel Bent Tubing
•409 Stainless Steel Construction
•Lifetime Warranty
Application: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette
MagnaFlow's C7 Corvette Performance Exhaust systems are rugged, reliable, built to last, and their legendary straight-through, wide-open, stainless steel mufflers provide the smooth, deep tone they are famous for. These exhaust kits and cat-back systems feature mandrel bends to ensure there are no flow restrictions and OEM-style barbed hangers for easy installation. All of MagnaFlow's exhaust systems are factory-checked for proper fit and dyno-tested to verify performance gains. All necessary installation hardware is included and the entire system is backed by MagnaFlow's lifetime warranty.
Made in the USA and engineered to last, for those seeking increased performance and better economy, MagnaFlow Street Series Performance Exhaust systems deliver the smooth deep sound you want and the wide-open performance power you need. Our exhaust systems feature straight-through flow designs for the ultimate in unrestricted horsepower and torque for big power while maintaining exhaust efficiency. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards.
•Made in the U.S.A.
•All Mandrel Bent Tubing
•409 Stainless Steel Construction
•Lifetime Warranty
Application: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette
Upgrade your Corvette exhaust with a MagnaFlow Corvette C5 Cat-Back Performance Exhaust System. Includes mufflers, over the axle pipes, and X-Pipe. This is a beautiful system that will bring your Corvette C5 to life with a thunderous growl. Free Shipping All Stainless Steel, Mandrel-Bent, Cat-Back Exhaust System With Polished Stainless Steel Tips Magnaflow Mufflers are the straight Wide Open performance muffler with smooth deep tones The Magnaflow muffler was developed to be a superior product line of performance mufflers. Wide Open performance Magnaflow mufflers outflow OEM chamber style mufflers by as much as 16%. This reduces engine heat and backpressure and improves exhaust scavenging from the combustion chamber The Magnaflow muffler minimizes the power robbing effects of the OEM system to restore torque and horsepower to the engine
Material: 100% Stainless Steel Tubing O.D. Size: 2.5in. System Type: Cat-Back TIP O.D. Size: 4in. TIP Quantity: 4 Single/Dual: Dual Exit Position: Rear Exit
Features and Benefits: Lifetime Warranty, Dyno Tested And Proven To Make Power, Performance Gains In Horsepower And Torque, Great Sound -Has A Smooth; Deep Tone, Easy To Install, Mandrel-Bent. All Welded. Built To Last.
Application: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 C5 Corvette
This MagnaFlow system is rugged, stylish, and powerful just like your Challenger SRT-8 Hemi! Available in both street and competition performance packages, this exhaust system will bring a noticable performance upgrade over the stock system for any Challenger out there. Dyno tested to ensure HP and Torque boosts across the RPM range, this system also provides fantastic exhaust tone and volume improvements, noticable to both the driver and any onlooker who sees this great car go by. Manufactured of high quality, mandrel bent, 2.5" stainless steel tubing, this is a powerful, durable system which will fit and install easily on any Challenger R/T out there. A fantastic upgrade for your vehicle!
Available in both Street and Competition exhaust systems. The major difference between the two in construction being the lack of mufflers on the Competition system, which results directly in more performance gains and louder exhaust tones and notes. Because of this added aggressiveness though, there is going to also come with it added cabin drone from the exhaust, and therefore it is not recommended for more casual drivers, who would be better suited looking to the Street series exhaust.
Application: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015 Dodge Challenger SRT
Magnaflow Cat-Back Exhaust 15589 for the 2011+ Mustang GT 5.0L
If you're looking for power, performance, and an aggressive exhaust tone for your 2011+ Mustang GT, look no further than this dual-exit Magnaflow system. Manufactured with quality stainless steel, this system is both durable and powerful, and will provide HP and Torque gains across the RPM range. Coupling those benefits with the traditional Magnaflow tonal quality and volume, means you have an exhaust with both performance benefits and an indistinguishable exhaust tone. A great modification piece that any Mustang GT owner would be happy to have.
5 x 8 x 14in. Dual Mufflers, 3in. Street Series, Dual 4in. Polished Tips, DUAL SPLIT REAR EXIT
These MagnaFlow performance exhaust systems are rugged, powerful, and stylish, just like the Camaro SS you drive! These exhaust kits feature OEM-style barbed hangers for easy installation, 2.5" mandrel bent stainless steel tubing to prevent exhaust flow restrictions, and MagnaFlow's legendary straight-through, wide-open, stainless steel muffler to provide a smooth, deep tone outside of the vehicle. This system is also more aggressive than the MagnaFlow Street Series, and will provide more performance boosts as well as an even louder exhaust note and tone. Of course, to the more casual driver, this will result in some cabin drone from the exhaust and is not favorable for all applications, and is recommended only for high performance Camaro SS applications. All MagnaFlow exhaust systems are factory-checked for proper fitment and dyno-tested to verify performance gains in HP and Torque across the RPM Range for the 2010-2013+ Chevy Camaro SS. These kits include all necessary installation hardware and some include a polished, stainless steel exhaust tip. They're backed by MagnaFlow's lifetime warranty, so you will be able to enjoy a rich, powerful sound for your Camaro's entire life! Available to fit and easily install on the the 6.2L V8, and the 6.2L V8 Performance package!
Street Series Axle-Back Magnaflow Performance Exhaust (#15593) for the 2011+ Mustang V8 5.0L
This Axle-Back Exhaust System for the 2011+ Mustang V8 5.0 provides an increased exhaust flow, and improved performance and exhaust tone as result. This system is the axle-back only, with mufflers, and will provide a performance/tone bonus, but only a more tame one. For greater bonuses and a more aggressive exhaust, look at the Competition Series Axle-Back or the Street Series Cat-Back Exhaust.
5 x 8 x 14in. Dual Mufflers, AXLE BACK, 3in. Street Series, Dual 4in. Polished Tips, DUAL SPLIT REAR EXIT
If you are looking for a new exhaust system for your C7 Corvette and want it to be the loudest most aggressive sound possible then we have the exhaust system for you. The MagnaFlow Competition Series Exhaust Systems are designed for those seeking maximum performance, reduced mass and an aggressive exhaust note that demands attention. A High Temp Satin Black Coating provides an aggressive unique style and added protection. These systems may not comply with all local or federal noise requirements.
• All Mandrel Bent Tubing• 409 Stainless Steel Construction with High Temp Satin Black Coating• Increased Horsepower and Torque• 1 Year Warranty on Black Finish, Lifetime Construction• Made in the USA
Application: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette
This Tru-X X-Pipe from Southern Car Parts for the allows for a much stronger and truer flow through your 2011-2014 Mustang exhaust. By opening up the exhaust mid-section for increased flow, this X-Pipe will help add performance and tonal quality bonuses to your Mustang exhaust. Ideal for use with a Magnaflow high-flow performance exhaust, this Tru-X X-Pipe is a fantastic exhaust modification piece for your 5.0L V8 Mustang.
Application: 2011, 2012, 2013, 2014 Ford Mustang 5.0L
Made in the USA and engineered to last, for those seeking increased performance and better economy, MagnaFlow Jeep Wrangler MF Series Performance Exhaust systems deliver the smooth deep sound you want and the wide-open performance power you need. Our exhaust systems feature straight-through flow designs for the ultimate in unrestricted horsepower and torque for big power while maintaining exhaust efficiency and the added benefit of a High Temp Satin Black Coating providing aggressive unique style and protection. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards.
•Made in the U.S.A.
•All Mandrel Bent Tubing
•409 Stainless Steel Construction with High Temp Satin Black Coating
•Increased Horsepower and Torque
•1 Year Warranty
Application: 2007, 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016 Jeep Wrangler JK
This 2.5" exhaust system from MagnaFlow for the Chevrolet Camaro is a fantastic Cat-Back modification exhaust system with cross pipe, designed and built with the highest quality mandrel bent stainless steel and dyno-tested to guarantee peak HP and Torque performance gains. These systems are powerful, and provide a wonderful volume and tone improvement for the exhaust note, without being too loud or aggressive, thus minimizing cabin drone. Available for The 3.6L V6, the 6.2L V8, and the 6.2L V8 Performance Package, so that you can find one to fit and easily install on to your 2010-2013+ Chevrolet Camaro! Backed by MagnaFlow's lifetime warranty, no Camaro owner can go wrong with this fantastic exhaust system!
Magnaflows 16583 Exhaust systems is designed for the 3.6L Camaro. It is a 2.5" system with dual 4" tips. It has a really nice deep exhaust note, lifetime warranty, and is made of 100% stainless steel. The is a complete catback exhaust system.
Magnaflow 16579 is also from the Magnaflow Street series and is designed for the 6.2L Camaro. It is also a complete catback system with 4" dual tips and a 2.5" system.
Magnaflow Camaro 16481 is also from the Street series but is desgined to work with the Camaro Performance Package option.
Wanna give your Corvette a little more growl and performance? One of the easiest bolt-on upgrades is to replace the Corvette Exhaust System with something more free-flowing. You will see performance gains on the dyno and the sound will be music to your ears. The MagnaFlow C6 Corvette Performance Exhaust System is made with 100% mandrel bent stainless steel with beautiful 4" quad tips. All Stainless Steel, Mandrel-Bent, Axle-back Exhaust System With Polished Stainless Steel Tips Magnaflow Mufflers are the straight Wide Open performance muffler with smooth deep tones The Magnaflow muffler was developed to be a superior product line of performance mufflers. Wide Open performance Magnaflow mufflers outflow OEM chamber style mufflers by as much as 16%. This reduces engine heat and backpressure and improves exhaust scavenging from the combustion chamber The Magnaflow muffler minimizes the power robbing effects of the OEM system to restore torque and horsepower to the engine
Application: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette
Street Series Performance Magnaflow Exhaust (#15591) for the 2011+ Mustang V6
This Street Series exhaust system for the 3.7L V6 Mustang provides fantastic exhaust flow benefits. A greater airflow through the exhaust means more HP and Torque for your Mustang across the RPM range, as well as a much improved exhaust tone and volume. Designed to give the Mustang a boost in street performance and drivability, this system is powerful and aggressive, but never too extreme at regular driving speeds. If you want a more aggressive, more powerful, and louder exhaust, be sure to check out the Magnaflow Competition Series Exhaust.
4 x 9 x 14in. Dual Mufflers, 2.5in. Street Series, Dual 4in. Polished Tips, DUAL SPLIT REAR EXIT
These MagnaFlow performance exhaust systems are rugged, powerful, and stylish, just like the Camaro SS you drive! These exhaust kits feature OEM-style barbed hangers for easy installation, 2.5" mandrel bent stainless steel tubing to prevent exhaust flow restrictions, and MagnaFlow's. The volume and tone from this exhaust is more aggressive than the Street Series exhaust systems, and may result in some cabin drone. Because of this, this system is only recommended for high performance competiton Camaro SS applications. All MagnaFlow exhaust systems are factory-checked for proper fitment and dyno-tested to verify performance gains in HP and Torque across the RPM Range for the 2014-2015 Chevy Camaro. These kits include all necessary installation hardware and some include a polished, stainless steel exhaust tip. They're backed by MagnaFlow's lifetime warranty, so you will be able to enjoy a rich, powerful sound for your Camaro's entire life! Fits perfectly and installs easily on the 6.2L V8 Camaro!