Pfadt Corvette C6 Z06 Camber Kit

You'll spend a lot of money getting a performance alignment done on your car - don't let that setting change just because you hit a pot hole, drop two wheels off the track or bang into some FIA curbing!

It's a known issue that the factory eccentrics are prone to slipping.  Our camber kit allows you to achieve the maximum negative camber and eliminates the eccentrics so that the the settings don't slip.  You'll be able to get more negative camber with our kit than is possible with the stock set up.

Our kit replaces the bolts on the front upper a-arms with stainless steel studs and we provide stainless steel shims to set your desired camber and caster.  The lower eccentrics are eliminated and the bolts are locked into their maximum position using a set of off-set plates.  For the rear we provide a set of shims for the eccentric to dial in your alignment and make it stick.

Don't risk tearing up a $600 set of tires because of an alignment eccentric that has slipped!  Install our camber kit and keep your hard-earned performance alignment in place!

This kit is a must for any C6 that is auto crossed or driven at the track. Please note that this kit is specific to the C6 Z06 and is not for the Z51 or the base car.