2010-2015 Camaro Headers


2010-2015 Camaro Headers

2010-2015 Camaro 5th Generation Headers

Long Tube and Short Tube Headers for the 2010 and Newer Camaro

Southern Car Parts stocks premium Camaro parts, and our 2010-2015 Camaro headers include some of the finest performance accessories you’ll find anywhere. From Kooks headers for your 2010-2015 Camaro to general 5th gen Camaro headers, SCP always delivers with the best products and lowest possible prices. Plus, our Chevy parts experts will help you make the right choice with any set of 5th gen Camaro long tube headers and other premium exhaust kits.

12 Item(s)

Grid List

Set Descending Direction
  • 2010-2013 Camaro SS Bassani Headers

    2010-2013 Camaro SS Bassani Headers

    $995.00
    Free Shipping
    If you're looking to improve the performance of your Camaro SS, changing out the header system is a fantastic place to begin. The stock header system is restrictive in air flow, and as such leaves a lot of room for improvement. These high-flow headers from Bassani are manufactured from the highest quality stainless steel materials to ensure that these headers are as durable and finished in look as they are in performance. A complete header replacement can offer gains of over 30+RWHP and Torque with a proper tune. Headers also help to improve your exhaust tone and volume by way of their greatly increased flow. These headers are brilliantly designed to provide the Camaro SS with unparalleled air flow through the exhaust. The headers are increased in size to 1 7/8", and go back to 3" outlet pipes. The design is simple and efficient as well, for a smooth, unbroken air flow. Comes with necessary O2 Sensor bungs and connections to hook-up directly to your Camaro SS, and designed to be a simple bolt-on installation, these headers are brilliant. Available in both catted and cat-less versions. Be aware that removal of functioning cats is illegal in many states, however, replacement of stock cats with high-flow after-market catalytic converters, when coupled with a proper tune, will make a vehicle with aftermarket headers truly street legal, and much more terrifying to the other cars you'll meet on the road. Open up even more potential from your 6.2L monster of a powerhouse with a set of Bassani performance headers today. This header system couples perfectly with the Camaro SS Bassani X-Pipe to make a true Long Tube header kit. If you want to go with the complete exhaust package from the headers back, you can pair these headers with the Camaro SS Bassani Performance Exhaust and X-Pipe for one of the most powerful and formidable exhaust systems on the road today. A complete Bassani Header, X-Pipe, and Exhaust package will make your Camaro SS one of the most aggressive and powerful sounding on the road, give it incredible HP and Torque gains across the RPM range, and make you the envy of all other vehicles.
  • 2010-2013 Camaro V8 Long Tube Header and X-Pipe Package

    2010-2013 Camaro V8 Long Tube Header and X-Pipe Package

    $1,535.95
        NOTE: Must purchase an SLP axle-back exhaust to use this full header package. To bolt to the factory H-Pipe use SLP part #30211 Header Package   SLP's new 2010-2013+ V8 Camaro 4-into-1 Long-Tube Header System features equal-length 1-3/4" main primaries flowing into 3" high flow collectors. The headers are mandrel bent 409 stainless steel and ceramic coated to keep heat in, exhaust velocity up, and under-hood temperatures down, while the rest of the system is made from high-quality stainless steel. These headers will install onto your L99 or LS3 Camaro's engine without any modifications, not to mention ease of installation. Clearances around all wire harnesses, vacuum lines and AC lines meet or exceed factory clearances. Best of all, SLP's complete header package netted +28HP RWHP and +27ft-lbs gains over the stock factory system AT THE WHEELS. (Gains above are with NO TUNE on an otherwise bone stock L99 Automatic 2010-2013 Camaro; don't be fooled by other power gains that INCLUDE a tune). They designed this complete header package to provide you with the most horsepower and torque possible. Also, included in the package is a pair of 3" high flow catalyst converters, which flows into a full 3" integrated PowerFlo-X Crossover assembly including 3" mufflers and under-axle pipes to bolt to your SLP axle-back exhaust system of choice. (Must purchase an SLP axle-back exhaust to use this full header package. To bolt to the factory H-Pipe use SLP part #30211 Header Package). This header package is fully compatible with all stock emissions-control equipment and use OEM flanges for perfect fit and proper bolt retention. All necessary installation instructions and hardware are included, backed by a Lifetime Warranty. SLP 4-into-1 Camaro Long Tube Header Package features: 4-into-1 design w/3" collectors, featuring 1-3/4" equal-length primaries. All mandrel bent stainless steel construction to maximize flow. +28 HP RWHP and +27 ft-lbs gains over stock system. Polished aluminum-ceramic thermal-barrier coating (interior and exterior surfaces) to keep heat in, exhaust velocity up, and under-hood temperatures down. 200 Cell Per Inch 3" High-Flow Cats for unrestricted exhaust flow. PowerFlo-X Crossover Pipe w/3" mufflers and under-axle pipes. Modular design, can switch mufflers with straight pipes. Complete bolt-on installation, bolts directly to SLP's axle-back systems, (no welding required). Are covered by Performance Guarantee and Lifetime Warranty.
  • 2010-2013 Camaro V6 Long Tube American Racing Headers

    2010-2013 Camaro V6 Long Tube American Racing Headers

    $1,670.00
    Free Shipping
    The wait is finally over for the 5th Generation Camaro and without hesitation, A.R.H. has what you need to exhaust the beast within. Now available is our 100% U.S. made long tube 304 S/S header systems that are designed to fit great, install easily and produce outstanding horsepower and torque. Recent dyno testing of our 1-7/8" long-tube system for Camaro SS produced gains of 32 RWHP without a tune and 50 RWHP with a tune. RWTQ was up 45 ft. lbs after the tune. The system comes with everything you'd expect from A.R.H., and because you're purchasing it from us at Southern Car Parts, you can also rest assured you'll be receiving the lowest price anywhere and free shipping! This kit includes 3/8" thick flanges with tig welded and hand ported inlets, merge collectors with scavenger spikes, 200 cell metallic substrate cats, OEM style band clamps, and Flat Out Racing Gaskets. The exhaust system is all 2 1/2" and extends to where it mates to the factory cat-back exhaust. Available as a 1 3/4" x 2 1/2" system only. The System without Cats is recommended for off-road use only. Price includes shipping to the continental 48 states. NOTE:  KIT INCLUDES GASKETS, CLAMPS AND O2 EXTENSION HARNESSES If ordering for the Camaro Convertible, you need to include the new American Racing Headers chromoly under-brace for clearance. This new brace helps beef up chassis stability, especially on the Camaro Convertible, while also increasing clearance underneath the vehicle for headers to fit. The brace ties the frame rails together in four solid points for less flex under any and all driving conditions--whether they be road, track, or drag. Just as all ARH products are, this is manufacturted entirely in the USA, where it is expertly TIG welded and powder-coated black for long-life durability and style. Brace helps to reduce weight by also removing the secondary sheet metal floor brace found all 2010-2013 and newer Camaros. Even if you're not driving a Camaro Convertible, this brace is a brilliant piece of underbody manufacturing at a great price, that couples perfectly with any headers set for increased structural stability and strength. Please select all Options for your header set from the drop-down menus below.
  • 2010-2013 Camaro V8 Long Tube Header and X-Pipe Package 2.5"

    2010-2013 Camaro V8 Long Tube Header and X-Pipe Package 2.5"

    $1,484.95
          SLP's new 2010-2013 V8 Camaro 4-into-1 Long-Tube Header System features equal-length 1-3/4" main primaries flowing into 3" high flow collectors, and finally flowing in to 2.5" Axle-Back Application. The headers are mandrel bent 409 stainless steel and ceramic coated to keep heat in, exhaust velocity up, and under-hood temperatures down, while the rest of the system is made from high-quality stainless steel. These headers will install onto your L99 or LS3 Camaro's engine without any modifications, not to mention ease of installation. Clearances around all wire harnesses, vacuum lines and AC lines meet or exceed factory clearances. Best of all, SLP's complete header package netted +28HP RWHP and +27ft-lbs gains over the stock factory system AT THE WHEELS. (Gains above are with NO TUNE on an otherwise bone stock L99 Automatic 2010-2013 Camaro; don't be fooled by other power gains that INCLUDE a tune). We designed our complete header packages to provide you with the most horsepower and torque possible. Also, included in the package is a pair of 3" high flow catalyst converters, which flows into a full 3" integrated PowerFlo-X™ Crossover assembly including 3" mufflers and under-axle pipes to bolt to your SLP LoudMouth II 2.5" Axle-Back Exhaust. This header package is fully compatible with all stock emissions-control equipment and use OEM flanges for perfect fit and proper bolt retention. All necessary installation instructions and hardware are included, backed by our Lifetime Warranty. SLP 4-into-1 Camaro Long Tube Header Package features: 4-into-1 design w/3" collectors, featuring 1-3/4" equal-length primaries. All mandrel bent stainless steel construction to maximize flow. +28 HP RWHP and +27 ft-lbs gains over stock system. Polished aluminum-ceramic thermal-barrier coating (interior and exterior surfaces) to keep heat in, exhaust velocity up, and under-hood temperatures down. 200 Cell Per Inch 3" High-Flow Cats for unrestricted exhaust flow. PowerFlo-X™ Crossover Pipe w/3" mufflers and under-axle pipes. Modular design, can switch mufflers with straight pipes. Complete bolt-on installation, bolts directly to SLP's axle-back systems, (no welding required). Are covered by our Performance Guarantee and Lifetime Warranty.
  • 2010-2015 Camaro SS Complete Kooks Performance Headers Exhaust

    2010-2015 Camaro SS Complete Kooks Performance Headers Exhaust

    $2,361.68
    Free Shipping
    If you're looking to increase HP and Torque performance across the RPM range while also adding a powerful and aggressive exhaust tone to your Camaro SS, a complete Header to Exhaust package is the ultimate upgrade for you. And, as far as ultimate upgrades are concerned, this Kooks complete package is as good as they come! Manufactured using the highest quality 304 stainless steel, with intelligent and open-flow designs, this system allows your Camaro SS to breathe much more, and, as a result, produce much more power and exhaust volume. Known world-round for their uncompromising quality and build-excellence, this Kooks package is the real deal for your Camaro SS! The system is crafted out of 304 Grade Stainless Steel and comes with a life-time warranty. Let your Camaro roar with a Kooks Exhaust and EXPERIENCE the 44+ horsepower gains along with the 42+ ft. LBS of torque gains! This system has multiple different options to ensure you're getting exactly what you're looking for for your Camaro! Available as: a 1 7/8" x 3" System; and a 2" x 3" System. All of these systems are built with the O2 Harness Extension to continue functioning with your stock system. The Exhaust is available both for the standard Camaro SS and for the Camaro SS GFX Package. You also have the option of a Catted Exhaust System or an Off-Road/Racing Only Catless System.
  • 2010-2013 Camaro SS V8 American Racing Long Tube Headers

    2010-2013 Camaro SS V8 American Racing Long Tube Headers

    $1,895.00
    Free Shipping
    2010-2013 Camaro SS American Racing Long Tube Headers Complete ARH Long Tube Header Package to the Rear Axle for the Camaro SS by American Racing Headers This is a complete Camaro Header package, Long Tube Headers, Mid Pipes, X pipe, O2 Extension Harness, gaskets and clamps. No pricing games or bait and switch. Everything you need for a complete American Racing Header installation all the way back to the rear axle installation. The wait is finally over for the 5th Generation Camaro and without hesitation, A.R.H. has what you need to exhaust the beast within. Now available is the 100% U.S. made long tube 304 S/S header systems that is designed to fit great, install easily and produce outstanding horsepower and torque. Recent dyno testing of the 1-7/8" system with cats produced gains of 32 RWHP without a tune and 50 RWHP with a tune. RWTQ was up 45 ft. lbs after the tune. The system comes with everything you'd expect from A.R.H. and with the lowest available pricing point and free shipping you've come to expect from us here at Southern Car Parts! This header system includes 3/8" thick flanges with tig welded and hand ported inlets, merge collectors with scavenger spikes, 200 cell metallic substrate cats, OEM style band clamps, Grade 8 hardware and Flat Out Racing Gaskets. The exhaust system is all 3" and extends to the rear axle where it reduces to 2-1/2" I.D. and mates to the factory exhaust. Primary sizes available are 1-7/8". Collectors come standard at 3". The 2" system is specificaly for race-performance high-modification Camaros, and should not typically be considered for every-day driver or regular street driving Camaros. Many states have laws against running a Cat-less system, and the Non-Catted X-Pipe header systems should only be considered for off-road usage or areas where emission laws allow for running without Cats. These are also available with an ARH axle-back muffler system to connect directly to the Long Tube headers. The ARH Axle-back system, constructed from the same high quality stainless steel and fitted with polished stainless steel exhaust tips, provides an even greater open exhaust flow for your Camaro, for further HP and Torque improvements across the RPM band and an improved exhaust note. The ARH axle-back system is specifically designed to optimize the sound and performance these Long-Tube headers, and is a fantastic option for rounding out these headers in to a complete exhaust package! NOTE:  KIT INCLUDES GASKETS, CLAMPS, GRADE 8 HARDWARE AND O2 EXTENSION HARNESSES If ordering for the Camaro Convertible, you need to include the new American Racing Headers chromoly under-brace for clearance. This new brace helps beef up chassis stability, especially on the Camaro Convertible, while also increasing clearance underneath the vehicle for headers to fit. The brace ties the frame rails together in four solid points for less flex under any and all driving conditions--whether they be road, track, or drag. Just as all ARH products are, this is manufacturted entirely in the USA, where it is expertly TIG welded and powder-coated black for long-life durability and style. Brace helps to reduce weight by also removing the secondary sheet metal floor brace found all 2010 and newer Camaros. Even if you're not driving a Camaro Convertible, this brace is a brilliant piece of underbody manufacturing at a great price, that couples perfectly with any headers set for increased structural stability and strength. Please select all Options for your header set from the drop-down menus below.  
  • 2010-2013 Camaro Billy Boat Performance Exhaust & Headers

    2010-2013 Camaro Billy Boat Performance Exhaust & Headers

    $1,315.00
    Free Shipping
    FREE SHIPPING TO THE LOWER 48 STATES! Billy Boat Performance Exhaust has been setting the pace for high performance stainless steel exhaust systems for 20 years now. B&B applies its deep racing heritage to craft one of the finest exhaust systems available. Continuing in that tradition B&B has recently introduced a line of exhaust systems for the new 2010-2013+ Chevy Camaro. CNC mandrel bent T304 stainless steel tubing is used throughout the entire system for a precise fit. The V8 is a full 3" system and is available in a classic and sport version while the V6 is a 2.5" system and is only available in the classic version. Both the V8 and V6 systems use a hand fabricated x-pipe that helps balance the exhaust pulses for better scavenging and a cleaner exhaust note. B&B has designed a muffler specifically for the Camaro using their proprietary Purge Resonance Technology or PRT. Hand fabricated out of T304 stainless steel the muffler offers increased exhaust flow and emits a nice deep muscle car bark at idle, acceleration and cruising speeds while all but eliminating the unwanted in-cabin, low frequency resonation. Performance increases of 10hp and 11ft/lbs on the V8 and 5hp and 5ft/lbs on the V6 were seen on their in house chassis dyno. For aesthetics Billy Boat Performance Exhaust incorporated their popular round double wall tips with a 4.50” on the V8 and a 4” on the V6 to give the Camaro a mean yet distinguishing look missing from the factory. The mufflers and tips are fully polished to a mirror like finish and as with all Billy Boat Performance Exhaust systems it is backed with a limited LIFETIME warranty. This system has dual round double wall tips. Tips are available with your choice of polished Stainless Steel tips--which are finished to a gorgeous mirror like shine--, and new Black Satin Ceramic Coated Exhaust tips (pictured above, on a Corvette exhaust)--for a more unique and aggressive modified appearance. B&B applies its deep racing heritage to craft one of the finest headers available. Continuing in that tradition B&B has recently introduced a long tube header that couple to their cat back system with a set of high flow cat pipes for the new 2010-2013 Chevy Camaro. Every B&B Camaro header is manufactured using only the highest grade T304 stainless steel materials. The 16ga, 1-3/4" tubing is CNC mandrel bent while the flanges are cut on one of two in house water jets from 3/8" thick stainless plate. Each header is then hand fabricated and tig welded in sturdy fixtures for a perfect fit every time. B&B also offers a set of high flow cat pipes that will couple the headers directly to the B&B cat back system. These cat pipes use 200 cell high flow metal catalyst. Increases in both horsepower and torque will be seen with this package.   FREE SHIPPING TO THE LOWER 48 STATES!
  • 2010-2013 Camaro SS Borla Long Tube XR1 Headers 17249

    2010-2013 Camaro SS Borla Long Tube XR1 Headers 17249

    $945.99
    Free Shipping
    If you want to add HP and Torque gains across the RPM range, an improved exhaust tone and volume, and greater engine flow, then a header package is perfect for you. This XR1 Long Tube Header Package, designed and built by the industry leader Borla, provides all of the fantastic performance gains expected from a header package, in one of the most finely crafted and durable systems available. By utilizing their XR1 technology, which has been used in high-profile Corvette racing, Borla was able to build a header package that provides owners with all of these benefits. This header system is built with 1 3/4" Primary Tubes, 2.5" Tubing, and Patented Race Quality Merge Collectors. Chevrolet pulled all the stops to ensure the re-launch of the legendary Camaro was worth the wait to agonized fans, and the world’s most winning exhaust has responded in kind. Rather than simply work from concept vehicles and drawings, BORLA® RD engineers headed down under to the GM Holden facility in Australia to work directly with the GM Camaro team. The result of this exciting collaboration is a series of exhaust systems including Cat-Backs,™ rear sections and long-tube headers, providing the ultimate in tuned performance, sound, style and fitment. For serious racers, BORLA® has topped their lineup with long tube stainless steel XR-1® Headers (PN17249). Combining 1¾” primary tubes with patented race merge collectors, this product is a direct result of BORLA’s 30-year legacy with race-winning Chevrolets from Indy to Daytona. Our Sale Price Includes Shipping Costs to the Continental 48 States!
  • 2010-2013 Camaro V8 Header Package for Stock H-Pipes

    2010-2013 Camaro V8 Header Package for Stock H-Pipes

    $1,209.95
              SLP's new 2010-2013 V8 Camaro 4-into-1 Long-Tube Header System features equal-length 1-3/4" main primaries flowing into 3" high flow collectors. The headers are mandrel bent 409 stainless steel and ceramic coated to keep heat in, exhaust velocity up, and under-hood temperatures down, while the rest of the system is made from high-quality stainless steel. These headers will install onto your L99 or LS3 Camaro's engine without any modifications, not to mention ease of installation. Clearances around all wire harnesses, vacuum lines and AC lines meet or exceed factory clearances. Best of all, SLP's complete header package netted +23 RWHP and +21ft-lbs gains over the stock factory system AT THE WHEELS. (Gains above are with NO TUNE on an otherwise bone stock L99 Automatic 2010-2013 Camaro; don't be fooled by other power gains that INCLUDE a tune). They designed this complete header packages to provide you with the most horsepower and torque possible. Also, included in the package is a pair of 3" high flow catalyst converters to bolt to your factory H-Pipe assembly. (If upgrading to SLP PowerFlo-X™ Crossover Assembly at a later date, you must purchase part #30211. Only an SLP axle-back exhaust will work with SLP's PowerFlo-X™ Crossover Assembly). This header package is fully compatible with all stock emissions-control equipment and use OEM flanges for perfect fit and proper bolt retention. All necessary installation instructions and hardware are included, backed by our Lifetime Warranty. SLP 4-into-1 Camaro Long Tube Header Package features:   4-into-1 design w/3" collectors, featuring 1-3/4" equal-length primaries. All mandrel bent stainless steel construction to maximize flow. +23 RWHP and +21 ft-lbs gains over stock system. Polished aluminum-ceramic thermal-barrier coating (interior and exterior surfaces) to keep heat in, exhaust velocity up, and under-hood temperatures down. 200 Cell Per Inch 3" High-Flow Cats for unrestricted exhaust flow. Complete bolt-on installation, bolts directly to factory H-Pipe (no welding required). Can upgrade to SLP's PowerFlo-X™ Crossover part #30211. Are covered by our Performance Guarantee and Lifetime Warranty.
  • 2010-2013 Camaro Borla Shorty Headers 17258

    2010-2013 Camaro Borla Shorty Headers 17258

    $1,171.99
    Free Shipping
    From Borla of the 2010-2013+ Camaro, Camaro Shorty Headers. One of the easiest ways to bolt some horsepower on your 2010-2013+ Camaro is by adding a Camaro cold air intake and changing the exhaust system to something that is more free flowing and designed for power. Shorty headers from Borla are a perfect compliment to any exhaust system. Shorty Headers (unlike long tube headers) are unique because you can install them without having to purchase a special length X pipe to accomodate the difference in header size. Shorty Headers bolt right on the exhaust manifold and allow you to use what ever X pipe and exhaust you wish beyond the headers as the shorty headers end right where the OEM system ends. Everything will bolt right up to a "Shorty" package just as it would OEM. BORLA Cat-Back exhausts and Headers feature patented, straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy and the distinctive BORLA Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium austenitic stainless steel, superior to T-400 series knockoffs, to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. Best of all, BORLA stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.
  • 2010-2013 Camaro V6 Short Tube American Racing Headers

    2010-2013 Camaro V6 Short Tube American Racing Headers

    $1,295.00
    Free Shipping
    The wait is finally over for the 5th Generation Camaro and without hesitation, A.R.H. has what you need to exhaust the beast within. Now available is our 100% U.S. made long tube 304 S/S header systems that are designed to fit great, install easily and produce outstanding horsepower and torque. Recent dyno testing of our 1-7/8" long-tube system for Camaro SS produced gains of 32 RWHP without a tune and 50 RWHP with a tune. RWTQ was up 45 ft. lbs after the tune. The system comes with everything you'd expect from A.R.H., and because you're purchasing it from us at Southern Car Parts, you can also rest assured you'll be receiving the lowest price anywhere and free shipping! This kit includes 3/8" thick flanges with tig welded and hand ported inlets, merge collectors with scavenger spikes, 200 cell metallic substrate cats, OEM style band clamps, and Flat Out Racing Gaskets. The exhaust system is all 2 1/2" and extends to where it mates to the factory cat-back exhaust. Available as a 1 3/4" x 2 1/2" system only. The System without Cats is recommended for off-road use only. Price includes shipping to the continental 48 states. NOTE:  KIT INCLUDES GASKETS, CLAMPS AND O2 EXTENSION HARNESSES If ordering for the Camaro Convertible, you need to include the new American Racing Headers chromoly under-brace for clearance. This new brace helps beef up chassis stability, especially on the Camaro Convertible, while also increasing clearance underneath the vehicle for headers to fit. The brace ties the frame rails together in four solid points for less flex under any and all driving conditions--whether they be road, track, or drag. Just as all ARH products are, this is manufacturted entirely in the USA, where it is expertly TIG welded and powder-coated black for long-life durability and style. Brace helps to reduce weight by also removing the secondary sheet metal floor brace found all 2010-2013 and newer Camaros. Even if you're not driving a Camaro Convertible, this brace is a brilliant piece of underbody manufacturing at a great price, that couples perfectly with any headers set for increased structural stability and strength. Please select all Options for your header set from the drop-down menus below.
  • 2010-2013 Camaro SS V8 American Racing Short Tube Headers

    2010-2013 Camaro SS V8 American Racing Short Tube Headers

    $1,425.00
    Free Shipping
    The wait is finally over for the 5th Generation Camaro and without hesitation, A.R.H. has what you need to exhaust the beast within. Now available is our 100% U.S. made long tube 304 S/S header systems that are designed to fit great, install easily and produce outstanding horsepower and torque. Recent dyno testing of the long-tube 1-7/8" system with cats produced gains of 32 RWHP without a tune and 50 RWHP with a tune. RWTQ was up 45 ft. lbs after the tune. The system comes with everything you'd expect from A.R.H. and, with the lowest possible price point and free shipping, all of the affordability and quality customer service you've come to expect from us at Southern Car Parts! This includes 3/8" thick flanges with tig welded and hand ported inlets, merge collectors with scavenger spikes, 200 cell metallic substrate cats, OEM style band clamps and Flat Out Racing Gaskets. The exhaust system is all 3" and extends to the stock cat-back where it reduces to 2-1/2" I.D. and mates to the factory exhaust. Primary sizes available are 1-3/4", 1-7/8" and 2". Collectors come standard at 3". The 2" system is specificaly for race-performance high-modification Camaros, and should not typically be considered for every-day driver or regular street driving Camaros. Many states have laws against running a Cat-less system, and the Non-Catted X-Pipe header systems should only be considered for off-road usage. NOTE:  KIT INCLUDES GASKETS, CLAMPS, and GRADE 8 HARDWARE If ordering for the Camaro Convertible, you need to include the new American Racing Headers chromoly under-brace for clearance. This new brace helps beef up chassis stability, especially on the Camaro Convertible, while also increasing clearance underneath the vehicle for headers to fit. The brace ties the frame rails together in four solid points for less flex under any and all driving conditions--whether they be road, track, or drag. Just as all ARH products are, this is manufacturted entirely in the USA, where it is expertly TIG welded and powder-coated black for long-life durability and style. Brace helps to reduce weight by also removing the secondary sheet metal floor brace found all 2010-2013 and newer Camaros. Even if you're not driving a Camaro Convertible, this brace is a brilliant piece of underbody manufacturing at a great price, that couples perfectly with any headers set for increased structural stability and strength. Please select all Options for your header set from the drop-down menus below.

12 Item(s)

Grid List

Set Descending Direction

All of the 2010-2015 Camaro headers at Southern Car Parts increase airflow – and optimal air flow is the single biggest ingredient for better power, more torque and also better gas mileage! Simply put, our 5th gen Camaro long tube headers deliver every time – particularly our 2010-2015 Camaro SS long tube headers. Speed AND sound – with SCP’s 2010-2015 Camaro long tube headers, you get the best of both worlds.

Top-End 2010-2015 Camaro SS Long Tube Headers

We only sell 2010-2015 Camaro headers from manufacturers we trust. The staff here at Southern Car Parts includes many Camaro fanatics – and if we wouldn’t put them on our Camaros, we won’t sell them. It’s as simple as that. Which means every set of 5th gen Camaro headers at SCP is pre-approved by some of the most trusted Camaro experts in the industry!

Whether you need LT1 2010-2015 Camaro headers or any other set of 2010-2015 Camaro V6 headers, Southern Car Parts is ready to help with your next DIY project. Browse our site for the best 2010-2015 Camaro headers for sale. Great prices. Unbeatable selection. And the customer service & expertise you’ve come to love – Southern Car Parts has everything you’re looking for. If you can’t find 5th generation 2010-2015 Camaro SS long tube headers, just give us a call at 888-631-1433, and we’ll help you find what you need. We’re excited to help with your next Camaro upgrade project – give us a call today!