2015-2019 Ford Mustang Exhaust Systems


2015-2019 Ford Mustang Exhaust Systems

2015-2019 Mustang Exhaust & Exhaust Systems

Every car enthusiast needs an exhaust system on their prized Mustang. Our Southern Car Parts 2015-2019 Mustang exhaust inventory offers you the best selection from the best manufacturers on the web. With so many different configurations to choose from, you can go for something reasonable or go big with a loud exhaust. No matter what you decide, your whole block will know just how much you love your Mustang.

No matter what kind of Mustang you drive, we have an exhaust system thatโ€™s fit just for you. We offer exhaust systems for your V8 or V6, including 2015-2019 Mustang Ecoboost exhaust systems for your four-cylinder. With brands like Kooks, Borla, SLP, Magnaflow, Corsa and more, you wonโ€™t find yourself low on any exhaust options. If you want to go bold, consider our Kooks cat-back 2015-2019 Mustang GT exhaust system. Complete with an H-Pipe and 4โ€ blacked-out tips, this 3โ€ stainless steel exhaust system is about as big as you can go before you have to start doing some customizing.

1-48 of 63

Page:
  1. 1
  2. 2

Grid List

Set Descending Direction
  • 2015-2017 Ford Mustang GT Gibson Exhaust System #619013

    2015-2017 Ford Mustang GT Gibson Exhaust System #619013

    $1,074.00
    Free Shipping
    PLEASE NOTE: This exhaust system is fully marked down. No coupon codes can be used. If a coupon code is used, the order will be canceled. Thank you. Gibson Performance introduces a new Dual Exhaust system to give the redesigned 6th Generation Ford Mustang 5.0 steed an extra shot of American- Made power, combined with an aggressive sound that lets others know to take notice. The complete Dual 3 Inch Stainless Steel X Pipe and trusted, power- proven SuperFlow mufflers with integrated CFT technology will create symphony under the chassis, as they work in tune to push any driver deeper into their seat. With each rap of the throttle, the throaty sound exiting from the Dual 4.5 Inch Intercooled Stainless Tips will work to alter their ego from Office Clerk to Road Warrior. Choosing between Raw Stainless or Elite Black Ceramic finishes could take longer than installing this Gibson Direct-Fit bolt-on exhaust system, allowing more time to burn fuel and lay rubber. To top it off, the Gibson craftsmen in Corona, California will back this American-Made exhaust system with a Lifetime Limited Warranty to ensure satisfaction is guaranteed. Free Ground Shipping on this product! Application: 2015, 2016, 2017 Ford Mustang
  • 2015-2017 Mustang GT V8 Borla Cat-Back Exhaust Touring 140589

    2015-2017 Mustang GT V8 Borla Cat-Back Exhaust Touring 140589

    $1,479.99
    Free Shipping
    If you're looking to increase the exhaust flow for your 2015-2017 GT Mustang, look no further than a premiere Borla exhaust. Manufactured by Borla, an industry leader in performance and build quality, this exhaust is sure to provide your Mustang with all of the best benefits of a Cat-back Exhaust. The Touring System is exemplified by providing an almost stock-like exhaust note with increased HP and Torque across the RPM range. This is the least aggressive Borla exhaust for the GT V8 5.0L Mustang.  Application: 2015, 2016, 2017 Ford Mustang 
  • 2015-2017 Ford Mustang KOOKS Axle Back Exhaust Black Tips#11516210

    2015-2017 Ford Mustang KOOKS Axle Back Exhaust Black Tips#11516210

    $798.82
    This 2015-2017 Ford Mustang GT Kooks Axle-Back exhaust system is sure to give you that tone that you remember from the 60s and 70s This exhaust system will give your Pony a very dead, muscle car sound. This exhaust system is made of 3" T304 stainless steel tubing and features black exhaust tips. Kooks includes 4" round tips, making this a very good looking system that also performs extremely well. Application: 2015, 2016, 2017 Ford Mustang
  • 2015-2017 Ford Mustang GT Borla Cat-Back Exhaust ATAK # 140591BC

    2015-2017 Ford Mustang GT Borla Cat-Back Exhaust ATAK # 140591BC

    $1,531.99
    Free Shipping
    If you're looking to increase the exhaust flow for your Mustang GT, look no further than a premiere Borla exhaust. Manufactured by Borla, an industry leader in performance and build quality, this exhaust is sure to provide your Mustang GT with all of the best benefits of an aftermarket exhaust. Borla’s commitment to using top quality 304 stainless steel, mandrel-bent tubing, and their painstakingly engineered and revolutionary ATAK (Acoustically-Tuned Applied Kinetics) Multi-Core mufflers results in an amazing exhaust that just has to be heard to be believed! This exhaust provides a fantastic aggressive exhaust note with minimal cabin drone, and will also give the Mustang optimal HP and Torque gains across the entire RPM range. FEATURES Loud aggressive sound X-pipe and "ATAK" race inspired mufflers included 2.5" mandrel bent stainless steel tubing 4" Black stainless steel tips w/ embossed Borla logo Direct bolt-on design Fits 2015-2017 GT Fastback Mustangs DESCRIPTION Loud Aggressive Sound. Add a touch of Borla excellence to your Coyote powered S550 GT Mustang with an "ATAK" catback exhaust system. A Borla "ATAK" catback system will significantly increase exhaust flow over the restrictive stock factory exhaust system for a dramatic increase in rear wheel horsepower and an aggressive muscle car sound that is not for the faint of heart. Race Car Growl. The included Borla X-Pipe not only helps increase power and performance, but it also adds a more raspy, race car like growl to the sound of your exhaust with its modern "X" crossover pipe design.  ATAK. Acoustically-Tuned Applied Kinetics is Borla's newest technology that produces the highest available dB (decibel) levels to pump the volume while retaining clarity of sound, avoiding distortion typically found in louder exhausts.  High-Quality Construction. Manufactured from ultra smooth mandrel bent 2.5" diameter T-304 stainless steel tubing to improve exhaust flow, this Borla catback exhaust system includes an X-pipe and features (2) race inspired "ATAK" mufflers with 4" chromed stainless steel tips that are embossed with the Borla logo for both impressive looks and great sound.  Application. This Borla ATAK 2.5" Catback exhaust system is designed as a direct bolt-on replacement for all 2015-2017 GT Fastback Mustangs equipped with the Coyote 5.0L V8 engine. Does not fit convertible models. Borla is famous for their 1,000,000 mile warranty. So you are covered for as long as your own your Mustang. FREE GROUND SHIPPING ON THIS PRODUCT! Applications:2015, 2016, 2017 Mustang GT
  • 2015-2017 Mustang GT MRT KR Cat-Back w/ DMS - (Coupe Only)

    2015-2017 Mustang GT MRT KR Cat-Back w/ DMS - (Coupe Only)

    $1,149.00
    Free Shipping
    When it comes to Mustang Performance, MRT doesn't cut any corners, and that statement stands true with our new line of 2015-2017 MRT exhaust systems. It's true that we only utilize the best materials in the industry, and we have an industry leading LIMITED LIFETIME WARRANTY; but for the engineering team here at MRT, it's more than that. We know that the Mustang is an iconic American muscle car, that being said, it should absolutely sound like one. Unlike most, MRT takes the additional step to utilize an H-pipe design, giving your Mustang a deep, aggressive tone; unlike the X-pipe design, which produces a higher pitched, raspy sound.  The 2015-2017 5.0 Mustang GT MRT Catback Exhaust system is 3" 304 Stainless Steel, replacing the OE mid-muffler with the MRT DMS as well as the heavy rear mufflers saves your Mustang an incredible 10-20lbs (varies based on muffler choice). This exhaust is designed to offer the most airflow throughout your exhaust without effecting Emission standards or requiring any modifications to be made to the OE exhaust. Our team of engineers optimized three key elements during the design process: (1) tube diameter, (2) smoothness of the exhaust path, and (3) back-pressure. MRT's CNC mandrel bending technology ensures that our Catback Exhaust has smooth bends and precise fit. MRT hand makes our exhaust systems out of the highest grade 304 Stainless Steel right here in the USA at the MRT Headquarters. We stand behind the quality of our exhaust systems with an industry leading LIMITED LIFETIME WARRANTY!  What is the DMS you ask? It's the newly designed Drone Management System by MRT to control any resonation created by aftermarket exhaust systems. Here at MRT, it wasn't good enough to have one of the most aggressive exhaust systems on the market for a 2015-2017 GT Mustang. We took it one step further, to ensure our customers don't avoid long drives to the beach due to discomfort caused by DDS (Dreadful Drone Syndrome). The MRT Catback Exhaust requires no modifications to your 2015-2017 GT Mustang, meaning this is a direct bolt-on part. We also offer this catback with a sinister matte black Cerakote finish for the tips. The Cerakote finish is heat resistant and is covered under the standard MRT Warranty. Please note, this system is designed to fit Fastback models only. Application: 2015, 2016, 2017 Ford Mustang 
  • 2018-2022 Ford Mustang GT Borla Exhaust System Touring 1014045

    2018-2022 Ford Mustang GT Borla Exhaust System Touring 1014045

    $1,999.99
    Free Shipping
    This Ford Mustang GT Cat-Back Exhaust System by Borla is an exceptional aftermarket upgrade designed specifically for Mustang GT models and offered by Southern Car Parts. This exhaust system is engineered to deliver superior performance, a deep and aggressive sound, and improved overall driving experience. Crafted with precision using high-quality materials, the Borla Cat-Back Exhaust System offers enhanced durability and longevity. The system features a mandrel-bent stainless steel construction, ensuring optimal exhaust flow and minimizing restrictions. This results in increased horsepower, torque, and improved fuel efficiency. One of the standout features of this exhaust system is its unmistakable sound. Borla's patented technology, combined with their decades of experience, creates a deep and throaty exhaust note that enhances the Mustang GT's already impressive V8 engine. It provides a thrilling and exhilarating soundtrack that captures the essence of the Mustang's performance-oriented heritage. The Cat-Back Exhaust System is designed as a direct bolt-on replacement for the factory exhaust, making installation hassle-free. All necessary hardware and detailed instructions are included, ensuring a seamless fit with the Mustang GT's existing components. In addition to the performance gains and aggressive sound, the Borla Cat-Back Exhaust System also offers visual appeal. The polished stainless steel tips add a touch of elegance to the Mustang's rear, enhancing its overall aesthetic presence. The exhaust system's sleek and sporty design complements the Mustang GT's exterior styling. Borla, known for their commitment to quality and performance, backs their exhaust systems with a million-mile warranty, providing peace of mind to Mustang owners. The Ford Mustang GT Cat-Back Exhaust System by Borla is a premium upgrade that brings out the best in the iconic Mustang GT. With its superior construction, powerful sound, increased performance, and easy installation, this exhaust system offers a comprehensive package for enthusiasts seeking to elevate their Mustang GT driving experience. Application: 2018, 2019, 2020, 2021, 2022 Ford Mustang GT (including Bullitt models)
  • 2015-2017 Ford Mustang GT Borla Exhaust ATAK Part # 140630

    2015-2017 Ford Mustang GT Borla Exhaust ATAK Part # 140630

    $1,767.99
    Free Shipping
    If you're looking to increase the exhaust flow for your Mustang GT, look no further than a premiere Borla exhaust. Manufactured by Borla, an industry leader in performance and build quality, this exhaust is sure to provide your Mustang GT with all of the best benefits of an aftermarket exhaust. Borla’s commitment to using top quality 304 stainless steel, mandel-bent tubing, and their painstakingly engineered and revolutionary ATAK (Acoustically-Tuned Applied Kinetics) Multi-Core mufflers results in an amazing exhaust that just has to be heard to be believed! This exhaust provides a fantastic aggressive exhaust note with minimal cabin drone, and will also give the Mustang optimal HP and Torque gains across the entire RPM range. FEATURES Loud aggressive sound X-pipe and "ATAK" race inspired mufflers included 3" mandrel bent stainless steel tubing 4" chromed stainless steel tips w/ embossed Borla logo Direct bolt-on design Works with both factory manifolds and aftermarket long tube headers Fits 2015-2017 GT Fastback Mustangs DESCRIPTION Loud Aggressive Sound. Add a touch of Borla excellence to your Coyote powered S550 GT Mustang with an "ATAK" 3in catback exhaust system. A Borla "ATAK" catback system will significantly increase exhaust flow over the restrictive stock factory exhaust system for a dramatic increase in rear wheel horsepower and an aggressive muscle car sound that is not for the faint of heart.  Race Car Growl. The included Borla X-Pipe not only helps increase power and performance, but it also adds a more raspy, race car like growl to the sound of your exhaust with its modern "X" crossover pipe design.  ATAK. Acoustically-Tuned Applied Kinetics is Borla's newest technology that produces the highest available dB (decibel) levels to pump the volume while retaining clarity of sound, avoiding distortion typically found in louder exhausts.  High-Quality Construction. Manufactured from ultra smooth mandrel bent 3" diameter T-304 stainless steel tubing to improve exhaust flow, this Borla catback exhaust system includes an X-pipe and features (2) race inspired "ATAK" mufflers with 4" chromed stainless steel tips that are embossed with the Borla logo for both impressive looks and great sound.  Works with Factory and Aftermarket Headers. Borla engineered their 3" catback exhaust to work with both the stock factory manifolds and larger aftermarket long tube headers by including step-down adapters and intermediate pipes. This lets you install the catback on your bone stock Mustang with the option of adding long tube headers or other performance parts in the future without having to purchase a whole new cat-back system. Application. This Borla ATAK 3" Catback exhaust system is designed as a direct bolt-on replacement for all 2015-2017 GT Fastback Mustangs equipped with the Coyote 5.0L V8 engine. Does not fit convertible models. Application: 2015, 2016, 2017 Ford Mustang
  • 2015-2017 Ford Mustang Shelby GT350 Cat-Back Exhaust ATAK 140684

    2015-2017 Ford Mustang Shelby GT350 Cat-Back Exhaust ATAK 140684

    $1,978.99
    Free Shipping
    2015-2017 Mustang Shelby GT350 5.2L Automatic/Manual Trans. Rear Wheel Drive 2 Door w/Selectable Driving Mode Bring the thunder to your Mustang Shelby GT350 with this Borla ATAK Cat-Back exhaust system. There's no doubt that your GT350 is an incredibly powerful machine right out of the box, and now here's the perfect exhaust system to give it the forceful and aggressive sound to match. Made from top quality 304 stainless steel, mandrel-bent tubing, and Borla's painstakingly engineered and revolutionary ATAK (Acoustically-Tuned Applied Kinetics) mufflers, this system will remove your stock resonator and provide considerably improved exhaust flow. This system utilizes the factory exhaust tips and valance and features valves for the Selectable Driving Mode.  If you're looking to increase the exhaust flow for your Shelby GT350, look no further than a premiere Borla exhaust. Manufactured by Borla, an industry leader in performance and build quality, this exhaust is sure to provide your Mustang with all of the best benefits of an aftermarket Cat-back Exhaust. The ATAK Multi-Core exhaust system has become renowned for its incredible quality. This exhaust provides a fantastic aggressive exhaust note with minimal cabin drone, and will also give the Mustang optimal HP and Torque gains across the entire RPM range. This system comes backed by Borla's Million Mile Warranty and comes with all hardware and instructions needed for installation. System Type: Cat-Back Exhaust  Pipe Diameter: 2.75" into muffler, dual 2.5" out Tips: No tips, uses factory valance Exit: Dual Split Rear Exit Installation Instructions Application: 2015, 2016, 2017 Ford Mustang
  • 2015-2017 Mustang GT MRT KR Cat-Back with H-pipe (Coupe Only)

    2015-2017 Mustang GT MRT KR Cat-Back with H-pipe (Coupe Only)

    $995.00
    Free Shipping
    When it comes to Mustang Performance, MRT doesn't cut any corners, and that statement stands true with our new line of 2015 MRT exhaust systems. It's true that we only utilize the best materials in the industry, and we have an industry leading LIMITED LIFETIME WARRANTY; but for the engineering team here at MRT, it's more than that. We know that the Mustang is an iconic American muscle car, that being said, it should absolutely sound like one. Unlike most, MRT takes the additional step to utilize an H-pipe design, giving your Mustang a deep, aggressive tone; unlike the X-pipe design, which produces a higher pitched, raspy sound.  The 2015-2017 5.0 Mustang GT MRT Catback Exhaust system is 3" 304 Stainless Steel, replacing the OE mid-muffler as well as the heavy rear mufflers saves your Mustang an incredible 19-29lbs (depending on muffler choice). This exhaust is designed to offer the most airflow throughout your exhaust without effecting Emission standards, or requiring any modifications to be made to the OE exhaust. Our team of engineers optimized three key elements during the design process: (1) tube diameter, (2) smoothness of the exhaust path, and (3) back-pressure. MRT's CNC mandrel bending technology ensures that our Catback Exhaust has smooth bends and precise fit. MRT hand makes our exhaust systems out of the highest grade 304 Stainless Steel right here in the USA at the MRT Headquarters. We stand behind the quality of our exhaust systems with an industry leading LIMITED LIFETIME WARRANTY!  The MRT Catback Exhaust requires no modifications to your 2015-2017 GT Mustang, meaning this is a direct bolt-on part. We also offer this Catback with a sinister matte black Cerakote finish for the tips. The Cerakote finish is heat resistant and is covered under the standard MRT Warranty. Please note, this system is designed to fit Fastback models only. Features Designed to fit the 2015-2017 Mustang GT (Fastback ONLY) Highest grade 304 Stainless Steel CNC Mandrel Bent 19-29lb weight savings over stock exhaust Deepens Exhaust Tone Improves Performance and Flow of Exhaust Direct Bolt on Installation Increased HP and TQ over comparative X-Pipe Off-Road Use Only Made in USA at MRT Headquarters LIMITED LIFETIME WARRANTY   Application: 2015, 2016, 2017 Ford Mustang 
  • 2015-2019 Mustang GT American Racing Headers Direct Connect System

    2015-2019 Mustang GT American Racing Headers Direct Connect System

    $1,596.20
    Free Shipping
    As powerful as the Mustang GT is from the factory, this 2015-2019 Mustang GT American Racing Headers Direct Connect System will help you get even more power from your Mustang This system will connect to your factory exhaust to maximize its power without buying un-needed parts. This system for the Mustang GT will bolt in quickly and give you more power throughout the entire RPM range. This is a complete Mustang header package, Long Tube Headers gaskets, and clamps. Everything you need for a complete American Racing Header installation. This system will bolt to the factory exhaust. A.R.H. has what you need to exhaust the beast within. Now available is the 100% U.S. made long tube 304 S/S header systems that are designed to fit great, install easily and produce outstanding horsepower and torque. The system comes with everything you'd expect from A.R.H. This header system includes 3/8" thick flanges with tig welded and hand ported inlets, merge collectors with scavenger spikes, 200 cell metallic substrate cats, OEM style band clamps, Grade 8 hardware, and Flat Out Racing Gaskets. Application: 2015, 2016, 2017, 2018, 2019 Mustang GT
  • 2015-2017 Mustang Eco Boost BORLA S-Type Rear Section Exhaust 11889

    2015-2017 Mustang Eco Boost BORLA S-Type Rear Section Exhaust 11889

    $889.99
    Free Shipping
    Southern Car Parts is your leader in 2015-2017 Ford Mustang Borla Exhaust Systems! If you're looking to increase the exhaust flow for your 2015-2017 EcoBoost Mustang, look no further than the Borla Mustang S-Type Exhaust. Manufactured by Borla, an industry leader in performance and build quality, the Mustang S-Type exhaust is sure to provide your Mustang with the exhaust note it should of had from the factory. The Borla S-Type System is exemplified by a powerful, loud, and aggressive exhaust tone, and also provides HP and Torque gains across the entire RPM range. FREE GROUND SHIPPING ON THIS PRODUCT! Application: 2015, 2016, 2017 Ford Mustang 
  • 2015-2017 Ford Mustang GT Exhaust 3" Convertible Cat Back Dual Split

    2015-2017 Ford Mustang GT Exhaust 3" Convertible Cat Back Dual Split

    $569.99
    Performance Series Designed to provide maximum performance and maximum value our Performance Series features 100% aluminized steel at a no-nonsense price. These systems are designed to provide the MBRP performance and sound you've grown to love to that oppereating on a budget. Featuring a two piece tail pipe and bolt on hangers these systems fit and perform just like our more expensive series at a price point that cannot be beaten. Dyno Proven Your MBRP muscle car system has undergone countless hours on our in-house Mustang 1100 AWD-SE Chassis Dynomometer, hundreds of miles on road and track and numerous tweaks and modifications to get maximum performance. From the vehicle specific muffler design to the fully mandrel bent tubing to minimal bend degree angles, your MBRP performance system gets exhaust out fast. An MBRP performance exhaust system is the starting point to getting the most from cold air intakes, programmers, modules and downloaders. Built to PerformMBRP's performance exhaust systems are built to perform. Designed to maximize exhaust flow and minimize exhaust temperatures your ride will use less gas, last longer and perform better. Every system we sell has been built to the most exacting standards in the industry. Easy InstallationMBRP systems are as much fun to install as to drive with on your muscle car. Bolt-on, no weld design makes installation a no hassle one and a half to two hour project. Everything is direct fit to the OEM hangers and you get all the clamps and parts you will need, all in one box. Sound & StylePerformance is one thing but at MBRP we believe that appearance and sound are just as important. Every MBRP performance exhaust system has been specifically tuned to get the optimal sound from your ride. Civilized when you need it to be and seriously aggressive when you want it, it is all classic muscle car. With our stamped logo on the tip and our unmistakable styling, there's no question that you have the hottest performance exhaust on the road - MBRP. Application: 2015, 2016, 2017 Ford Mustang
  • 2015-2017 Ford Mustang GT Corsa Axle-Back Touring Exhaust System 14329BLK

    2015-2017 Ford Mustang GT Corsa Axle-Back Touring Exhaust System 14329BLK

    $1,671.99
    Free Shipping
    3.0" Axle-Back, Dual Rear Exit with Single 4.5" Black Pro-Series Tips CORSA's Patented Reflective Sound Cancellation® (RSC) Technology allows acoustic engineers to create a drone free exhaust sound, styled specifically to fit the personality of your vehicle. Each system is designed to increase vehicle performance, deliver an AGGRESSIVE SOUND under acceleration and a DRONE-FREE EXPERIENCE during cruise. Performance gains are not affected by sound choice.   Patented No Drone, Reflective Sound Cancellation (RSC) Technology   Custom Tuned, Aggressive Exhaust Note   No Drone At Cruise   304 Stainless Steel Construction   Dual Walled, Black Pro-Series Tips   Flows 45.99% Better Than Stock Easy Bolt-On Installation   Detailed Printed Instructions Included, Full-Color Available Online   No Welding Required   Made in the U.S.A.
  • 2016-2019 Mustang Shelby GT350 American Racing Headers Direct Connect System

    2016-2019 Mustang Shelby GT350 American Racing Headers Direct Connect System

    $1,866.00
    Free Shipping
    As powerful as the GT350 is from the factory, this 2016-2019 Mustang Shelby GT350 American Racing Headers Direct Connect System will help you get even more power from your Shelby This system will connect to your factory exhaust to maximize its power without buying un-needed parts. This system for the GT350 Mustang will bolt in quickly and give you more power throughout the entire RPM range. This is a complete Mustang header package, Long Tube Headers gaskets, and clamps. Everything you need for a complete American Racing Header installation. This system will bolt to the factory exhaust. A.R.H. has what you need to exhaust the beast within. Now available is the 100% U.S. made long tube 304 S/S header systems that aredesigned to fit great, install easily and produce outstanding horsepower and torque. The system comes with everything you'd expect from A.R.H. This header system includes 3/8" thick flanges with tig welded and hand ported inlets, merge collectors with scavenger spikes, 200 cell metallic substrate cats, OEM style band clamps, Grade 8 hardware, and Flat Out Racing Gaskets. Application: 2016, 2017, 2018, 2019 GT350 Mustang
  • 2015-2017 Mustang Eco Boost BORLA S-Type Cat Back Exhaust 140584

    2015-2017 Mustang Eco Boost BORLA S-Type Cat Back Exhaust 140584

    $1,379.99
    Free Shipping
    Southern Car Parts is your leader in 2015-2017 Ford Mustang Borla Exhaust Systems! If you're looking to increase the exhaust flow for your 2015-2017 Eco Boost Mustang, look no further than the Borla Mustang S-Type Exhaust. Manufactured by Borla, an industry leader in performance and build quality, the Mustang S-Type exhaust is sure to provide your Mustang with the exhaust note it should of had from the factory. The Borla S-Type System is exemplified by a powerful, loud, and aggressive exhaust tone, and also provides HP and Torque gains across the entire RPM range. FREE GROUND SHIPPING ON THIS PRODUCT! Applications: 2015, 2016 2017 Ford Mustang
  • 2015-2017 Mustang GT 5.0 MBRP Exhaust 3" Cat Back Dual Split

    2015-2017 Mustang GT 5.0 MBRP Exhaust 3" Cat Back Dual Split

    $614.99
    PLEASE NOTE: THIS SYSTEM WILL NOT FIT CONVERTIBLE. Black Series For the hottest look on the market right now look no further than MBRB's new Black Series. Using a high heat coating that is designed specifically for exhaust applications, our new Black Series is sure to turn heads and provide excelent performance for years to come.Utilizing the same manafacturing process as our stainless systems you know these systems will fit right the first time. Our Black Series features a 1 year Warranty on the coating and a 3 year warranty on the exhaust components. Dyno ProvenYour MBRP muscle car system has undergone countless hours on our in-house Mustang 1100 AWD-SE Chassis Dynomometer, hundreds of miles on road and track and numerous tweaks and modifications to get maximum performance. From the vehicle specific muffler design to the fully mandrel bent tubing to minimal bend degree angles, your MBRP performance system gets exhaust out fast. An MBRP performance exhaust system is the starting point to getting the most from cold air intakes, programmers, modules and downloaders. Built to PerformMBRP's performance exhaust systems are built to perform. Designed to maximize exhaust flow and minimize exhaust temperatures your ride will use less gas, last longer and perform better. Every system we sell has been built to the most exacting standards in the industry. Easy InstallationMBRP systems are as much fun to install as to drive with on your muscle car. Bolt-on, no weld design makes installation a no hassle one and a half to two-hour project. Everything is direct fit to the OEM hangers and you get all the clamps and parts you will need, all in one box. Sound & StylePerformance is one thing but at MBRP we believe that appearance and sound are just as important. Every MBRP performance exhaust system has been specifically tuned to get the optimal sound from your ride. Civilized when you need it to be and seriously aggressive when you want it, it is all classic muscle car. With our stamped logo on the tip and our unmistakable styling, there's no question that you have the hottest performance exhaust on the road - MBRP. Application: 2015, 2016, 2017 Ford Mustang
  • 2015-2017 Ford Mustang GT Corsa Cat Back Sport Exhaust System 14332BLK

    2015-2017 Ford Mustang GT Corsa Cat Back Sport Exhaust System 14332BLK

    $2,093.99
    Free Shipping
    3.0" Cat-Back, Dual Rear Exit with Single 4.5"  Black Pro-Series Tips. CORSA's Patented Reflective Sound Cancellation® (RSC) Technology allows acoustic engineers to create a drone free exhaust sound, styled specifically to fit the personality of your vehicle. Each system is designed to increase vehicle performance, deliver an AGGRESSIVE SOUND under acceleration and a DRONE-FREE EXPERIENCE during cruise. Performance gains are not affected by sound choice.   Patented No Drone, Reflective Sound Cancellation (RSC) Technology   Custom Tuned, Aggressive Exhaust Note   No Drone At Cruise   304 Stainless Steel Construction   Dual Walled,  Black Pro-Series Tips   Flows 48.35% Better Than Stock   7lbs Lighter Than Stock   Easy Bolt-On   Installation Detailed Printed Instructions Included,Full-Color Available Online   No Welding Required   Made in the U.S.A.
  • 2015-2017 Mustang GT AWE Dual Tip Axle Back Touring Edition 3015-32082

    2015-2017 Mustang GT AWE Dual Tip Axle Back Touring Edition 3015-32082

    $749.00
    Free Shipping
    If you are looking to give your Mustang a bold new sound then this 2015-2017 Mustang GT AWE Dual Tip Axle Back Touring Edition 3015-32082 is what you want. This axel-back exhaust system is a full 3" system for maximum power and exhaust flow. This 304 stainless steel exhaust system is a powerful sounding upgrade for your Mustang GT. Replacing your factory muffler with these AWE muffler free cat-back will save weight and give your Mustang a more aggressive sound. These dual tip mufflers fit perfectly into the factory rear valance for a factory look.  AWE's Exclusive 180Technology  As exhaust gases exit your Mustang GT's engine and flow into an AWE 180 Technology® equipped resonator, they pass through strategically located ports, and into reflection chambers. Sound waves, carried by these exhaust gasses, bounce off the walls of the reflection chambers. By controlling the size and location of the ports and the chambers, we also control when the sound waves exit the chambers. The specific timing of when the reflected sound waves rejoin the main exhaust flow creates a one-hundred-and-eighty-degree out-of-phase sound wave that cancels out problematic frequencies. Call it science, call it magic, or call it 180 Technology® by AWE. Features:โ— Proudly engineered, designed, and manufactured in-house, in the USAโ— No compromises: all muscle, zero droneโ— Peak gains of 11 hp and 5 ft-lbs of torque, and max gains of 16 hp and 10 ft-lbs of torque to the crankโ— Handcrafted from 3” U.S.-sourced CNC mandrel-bent .065” wall T304L stainless steelโ— Precision-engineered X-pipe is standard in each catback configurationโ— 4.5” double-walled tips in chrome silver or diamond blackโ— Less is more: clean, non-baffled, straight-through design maximizes performanceโ— Direct bolt-on system means factory-like simplicityโ— No Check Engine Light -- Guaranteedโ— Perfect Fitment -- Guaranteedโ— Featuring the AWE Lifetime Exhaust Warranty Application: 2015, 2016, 2017, 2018 Mustang GT Coupe, Convertible 
  • 2015-2017 Ford Mustang GT 5.0 MBRP Exhaust 3" Cat Back Dual Split Rear Street Version 4.5" tips

    2015-2017 Ford Mustang GT 5.0 MBRP Exhaust 3" Cat Back Dual Split Rear Street Version 4.5" tips

    $654.99
    For the hottest look on the market right now look no further than MBRB's new Black Series. Using a high heat coating that is designed specifically for exhaust applications, our new Black Series is sure to turn heads and provide excelent performance for years to come.Utilizing the same manafacturing process as our stainless systems you know these systems will fit right the first time. Our Black Series features a 1 year Warranty on the coating and a 3 year warranty on the exhaust components.   Dyno Proven Your MBRP muscle car system has undergone countless hours on our in-house Mustang 1100 AWD-SE Chassis Dynomometer, hundreds of miles on road and track and numerous tweaks and modifications to get maximum performance. From the vehicle specific muffler design to the fully mandrel bent tubing to minimal bend degree angles, your MBRP performance system gets exhaust out fast. An MBRP performance exhaust system is the starting point to getting the most from cold air intakes, programmers, modules and downloaders.   Built to Perform MBRP's performance exhaust systems are built to perform. Designed to maximize exhaust flow and minimize exhaust temperatures your ride will use less gas, last longer and perform better. Every system we sell has been built to the most exacting standards in the industry.   Easy Installation MBRP systems are as much fun to install as to drive with on your muscle car. Bolt-on, no weld design makes installation a no hassle one and a half to two hour project. Everything is direct fit to the OEM hangers and you get all the clamps and parts you will need, all in one box.   Sound & Style Performance is one thing but at MBRP we believe that appearance and sound are just as important. Every MBRP performance exhaust system has been specifically tuned to get the optimal sound from your ride. Civilized when you need it to be and seriously aggressive when you want it, it is all classic muscle car. With our stamped logo on the tip and our unmistakable styling, there's no question that you have the hottest performance exhaust on the road - MBRP.
  • 2015-2017 Ford Mustang ROUSH 5.0 L Exhaust Kit Round Tip

    2015-2017 Ford Mustang ROUSH 5.0 L Exhaust Kit Round Tip

    $839.99
    Free Shipping
    Give your 2015-2017 5.0L Mustang a more aggressive sound and boost performance with a ROUSH exhaust system. 2015-2017 ROUSH Axle-Back exhaust systems are constructed of corrosion resistant T-304 stainless Steel and are mandrel bent. Mandrel bending maintains a constant inner diameter with no kinks or creases. This improves exhaust flow and reduces backpressure in the system. This system includes single tip High flow mufflers that improve the stock sound of the Mustang V8 This system will produce louder deeper exhaust tone, with a healthy V8 burble at idle, building to a powerful roar at high revs.  Roush Performance has long been known as the leading tuning for the Ford Mustang. Anytime you purchase a Roush product you can rest assured that product is built to the highest possibly specifications for your 2015-2017 Ford Mustang. Bottom line, if you purchase a Roush Performance product from Southern Car Parts, you can rest assured knowing two things. Number one, you’ll have the highest quality aftermarket performance or aesthetic product available from your Mustang and number two, you’ll receive the best customer service and customer support in the industry. We are here to help you before, during and after the sale. If you have any questions about a Roush product, please do not hesitate to ask.   No discounts can be taken on Roush products. The price shown in our lowest price available.     Application: 2015, 2016, 2017 Ford Mustang
  • 2015-2017 Mustang GT American Racing Headers Direct Connection System For Corsa Catback

    2015-2017 Mustang GT ARH Direct Connection System For Corsa Catback

    $1,585.02
    Free Shipping
    If you are looking a way to add a set of high performance headers to Corsa catback on your Mustang GT then you should check out this system. The latest generation of Mustangs brought performance and handling to a whole new level, but more power and torque as still waiting to be unleashed from an anemic factory exhaust. With header systems in 1-3/4", 1-7/8" and a 3" collector, our Direct Connection System For Corsa Catback unlocks that power with performance gains up to 30 RWHP. The Direct Connection System For Corsa Catback includes headers, Cats and connection pipes for an exhaust system upgrade that allows you to keep your Corsa catback exhaust. This system is designed to work for Corsa Catback Systems, without any cutting or welding. Product features on ALL American Racing Headers systems include: 100% Made in the USA - Never Outsourced Made entirely of 304 stainless steel  3/8" thick laser-cut flanges for a warp-free seal Hand-ported TIG welded inlets Optimized primary tube routing for superior fit and performance Merge collectors complete with welded scavenger spikes Catted systems feature 200 cell metallic substrate catalytic converters for extreme durability Application: 2015, 2016, 2017 Mustang GT
  • 2015-2017 Ford Mustang 2.3L Ecoboost Exhaust 3" Cat Back Dual Split

    2015-2017 Ford Mustang 2.3L Ecoboost Exhaust 3" Cat Back Dual Split

    $624.99
    If you are working with a tight budget for modifying your 2015 through 2017 for Mustang 2.3L Eco-boost then this MBRP exhaust system something you need to take a look at. This exhaust system is designed to provide maximum performance and maximum value. It is built with 100% aluminized steel so you do not need to pay the outrageous prices that people charge for stainless steel exhaust systems. But just because this is a budget system does not mean you're giving up anything. These MBRP exhaust systems still feature the performance and sound you have come to expect from an and BRP exhaust system. This system features a two-piece tailpipe and bolt on hangers to ensure that these budget-priced exhaust systems will fit and perform just like a much more expensive exhaust system. A quality exhaust system like this one from and BRP will add dyno proven horsepower and torque for maximum performance. Dyno ProvenYour MBRP muscle car system has undergone countless hours on our in-house Mustang 1100 AWD-SE Chassis Dynomometer, hundreds of miles on road and track and numerous tweaks and modifications to get maximum performance. From the vehicle specific muffler design to the fully mandrel bent tubing to minimal bend degree angles, your MBRP performance system gets exhaust out fast. An MBRP performance exhaust system is the starting point to getting the most from cold air intakes, programmers, modules, and downloaders. Built to PerformMBRP's performance exhaust systems are built to perform. Designed to maximize exhaust flow and minimize exhaust temperatures your ride will use less gas, last longer and perform better. Every system we sell has been built to the most exacting standards in the industry. Easy InstallationMBRP systems are as much fun to install as to drive with on your muscle car. Bolt-on, no weld design makes installation a no hassle one and a half to two-hour project. Everything is a direct fit to the OEM hangers and you get all the clamps and parts you will need, all in one box. Sound & StylePerformance is one thing but at MBRP we believe that appearance and sound are just as important. Every MBRP performance exhaust system has been specifically tuned to get the optimal sound from your ride. Civilized when you need it to be and seriously aggressive when you want it, it is all classic muscle car. With our stamped logo on the tip and our unmistakable styling, there's no question that you have the hottest performance exhaust on the road - MBRP. Application: 2015, 2016, 2017 Ford Mustang Ecoboost  
  • 2015-2017 Mustang BORLA V6 Cat-Back Exhaust ATAK part # 140588

    2015-2017 Mustang BORLA V6 Cat-Back Exhaust ATAK part # 140588

    $1,399.99
    Free Shipping
    If your 2015-2017 Mustang is outfitted with the V6 Engine, this is the perfect exhaust for you. Manufactured and developed utilizing Borla's patented ATAK technology, this system is designed to provide your Mustang with increased HP and Torque performance across the RPM range. In addition to these performance benefits, the Borla ATAK exhaust will also provide your vehicle with a strong and aggressive exhaust tone and volume that forms a powerful crescendo up through the RPM range. The ATAK exhaust is also designed to minimize cabin drone--a difficult task for an exhaust this aggressive and powerful sounding--so that you can enjoy the incredible benefits of this exhaust system without having the volume drone out your thoughts inside the vehicle. The new line of Borla ATAK exhaust systems are very highly rated, and for good reason. If you're looking for a top-quality exhaust for your top-quality vehicle, look no further, because you've found the best that is offered. Part# Product Type Pipe Diameter Tip Size Tip Description Tip # Exit 140588 Cat-Back™ Exhaust 2.25" 4" Single Round Rolled Angle-Cut 36 Single Split Rear Exit   Installation Instructions
  • 2015-2017 Ford Mustang GT Convertible KOOKS Catback Full 3" Exhaust With H-Pipe And Polished Tips 11515401

    2015-2017 Ford Mustang GT KOOKS Catback Full 3" Exhaust

    $1,630.73
    Free Shipping
    If you ar looking for maximum flow for your 5.0 Mustang convertible this full 3" exhaust system from KOOKS is just what you are looking for. One of the best parts about driving a Mustang Convertible is that you can really hear and enjoy the exhaust on your car. These KOOKS exhaust systems will really wake up your car and give you a much more noticeable exhaust tone. The H-Pipe design of this exhaust gives you a more aggressive sound to the exhaust that is classic muscle car sound compared to the smoother more modern sound of an X-Pipe design. This system will connect to your set of KOOKS headers to really make your Mustang perform! These systems are available with your choice of stainless exhaust tips. Since 1962, Kooks has had the reputation of making the highest quality & best performing Custom Stainless Steel headers and exhaust systems. Kooks offers some of the highest quality headers and exhausts available here at Southern Car Parts. Kooks has been making their exhaust systems here in the USA since 1962. 2015-2017 FORD MUSTANG GT CONVERTIBLE 5.0L FULL 3" CAT BACK EXHAUST W/ H-PIPE & POLISHED TIPS Part# 11515401 Full 3" Stainless Steel Exhaust System with H-Pipe, 3" Kooks Oval Mufflers, and 4" Slash Cut Polished Tips For Use With Kooks Headers These products are NOT legal for sale, installation, or use on a licensed vehicle in the state of California, and they do NOT meet CARB compliance 2015-2017 FORD MUSTANG GT CONVERTIBLE 5.0L FULL 3" CAT BACK EXHAUST W/ H-PIPE & BLACK TIPS Part# 11515410 Full 3" Stainless Steel Exhaust System with H-Pipe, 3" Kooks Oval Mufflers, and 4" Slash Cut Black Tips For Use With Kooks Headers These products are NOT legal for sale, installation, or use on a licensed vehicle in the state of California, and they do NOT meet CARB compliance Application: 2015, 2016, 2017 Mustang GT Convertible 
  • 2015-2017 Mustang V8 SLP Axle Back Exhaust LoudMouth II

    2015-2017 Mustang V8 SLP Axle Back Exhaust LoudMouth II

    $469.99
    Free Shipping
    The SLP LoudMouth LM-2 Mustang Axle-Back Exhaust System allows for maximum flow via straight 2.5-inch tubing, and weighs less than the OEM exhaust. The entirely-304 stainless steel system features dual custom-tailored tips and comes with pre-welded hangers. It only takes about a half hour to install the system. These exhaust systems are 50-state emission legal and are covered by SLP’s lifetime limited warranty. Whether you’re rocking a Mustang with a manual or automatic transmission, our LoudMouth LM-2 exhausts will fit your application. SLP's initial claim to fame says it all: It was the first company in the performance aftermarket to develop and manufacture a 50-state emission-legal performance package -- specifically for V8 Camaros and Firebirds. True to its name ("Street Legal Performance"). Established in 1987, SLP has stood for quality performance enhancements for late-model American Muscle cars from the beginning, and it continues this commitment today.The vision of SLP's parts program is to not just provide performance, but to do so with the best engineering practices and quality possible, No discounts can be taken on SLP products. The price shown is our lowest price available. Application: 2015, 2016, 2017 Ford Mustang 
  • 2015-2017 Mustang Stainless Works 3" Chambered Round Catback

    2015-2017 Mustang Stainless Works 3" Chambered Round Catback

    $1,406.00
    Free Shipping
    2015-2017 Mustang GT 5.0L 304 stainless steel 3" catback dual-exhaust with retro chambered mufflers and mirror-polished stainless steel slash-cut conical double-wall tips. Includes hangers and clamps; superior performance with a lifetime guarantee. Choose your fit: Factory Connect (to mate to factory manifolds) or Performance Connect (to maintain a full 3" system to Stainless Works headers). Choose your cross-over: Customize your exhaust with our 3" stainless steel H-pipe or X-pipe. Choose your muffler core size: Our standard system is designed with a 2.5" inner core, but we do offer a full 3" core that results in an even louder, more aggressive sound. Make Ford Model Mustang GT Year 2015-2017 Engine 5.0L Product Type Exhaust Exhaust Size 3" Muffler Style Chambered Round Tip Style Dual Slash Cut Number of Tips 2 Single/Dual Single Exit Position Factory Location Material 304 Stainless Steel FREE GROUND SHIPPING ON THIS ITEM! <   Application: 2015, 2016, 2017 Ford Mustang
  • 2015-2017 Ford Mustang GT Convertible KOOKS Catback OEM Exhaust With X-Pipe 11514101

    2015-2017 Ford Mustang GT Convertible KOOKS Catback OEM Exhaust With X-Pipe

    $1,506.86
    Free Shipping
    One of the best parts about driving a Mustang Convertible is that you can really hear and enjoy the exhaust on your car. These KOOKS exhaust systems will really wake up your car and give you a much more noticeable exhaust tone. The X-Pipe design of this exhaust gives you a much smoother more modern sound to the exhaust that is not as aggressive as a more traditional H-Pipe design. This system will connect to your factory cats or with as set of connector pipes you can add a set of KOOKS headers to really make your Mustang perform! These systems are available with your choice of stainless exhaust tips.Since 1962, Kooks has had the reputation of making the highest quality & best performing Custom Stainless Steel headers and exhaust systems.  Kooks offers some of the highest quality headers and exhausts available here at Southern Car Parts. Kooks has been making their exhaust systems here in the USA since 1962.2015-2017 FORD MUSTANG GT CONVERTIBLE 5.0L OEM TO 3" CAT BACK EXHAUST W/ X-PIPE & POLISHED TIPS Part# 11514101OEM to 3" Stainless Steel Cat Back ExhaustIncludes 3" Stainless Steel X-Pipe, 4" Polished Tips; Kooks Polished Oval Race Mufflers, and 3" over axle pipesFor Use With Kooks Complete Header & Connection Pipe System Or With Factory OEM Exhaust System2015-2017 FORD MUSTANG GT CONVERTIBLE 5.0L OEM TO 3" CAT BACK EXHAUST W/ X-PIPE & BLACK TIPS Part# 115141112015+ Ford Mustang GT 5.0L Exhaust SystemOEM x 3" Stainless Steel Exhaust System with X-Pipe, 3" Kooks Oval Mufflers, and 4" Slash Cut Black TipsFor Use With Kooks Headers and Connection Pipes or Factory OEM Exhaust SystemThese products are NOT legal for sale, installation, or use on a licensed vehicle in the state of California, and they do NOT meet CARB complianceApplication: 2015, 2016, 2017 Mustang GT Convertible  
  • 2015-2017 Ford Mustang GT Gibson Exhaust System #619013-B

    2015-2017 Ford Mustang GT Gibson Exhaust System #619013-B

    $1,074.00
    Free Shipping
    PLEASE NOTE: This exhaust system is fully marked down. No coupon codes can be used. If a coupon code is used, the order will be canceled. Thank you. Gibson Performance introduces a new Dual Exhaust system to give the redesigned 6th Generation Ford Mustang 5.0 steed an extra shot of American- Made power, combined with an aggressive sound that lets others know to take notice. The complete Dual 3 Inch Stainless Steel X Pipe and trusted, power- proven SuperFlow mufflers with integrated CFT technology will create symphony under the chassis, as they work in tune to push any driver deeper into their seat. With each rap of the throttle, the throaty sound exiting from the Dual 4.5 Inch Intercooled Stainless Tips will work to alter their ego from Office Clerk to Road Warrior. Choosing between Raw Stainless or Elite Black Ceramic finishes could take longer than installing this Gibson Direct-Fit bolt-on exhaust system, allowing more time to burn fuel and lay rubber. To top it off, the Gibson craftsmen in Corona, California will back this American-Made exhaust system with a Lifetime Limited Warranty to ensure satisfaction is guaranteed. Free Ground Shipping on this product! Application: 2015, 2016, 2017 Ford Mustang
  • 2015-2017 Ford Mustang EcoBoost KOOKS Catback Exhaust w/Y pipe

    2015-2017 Ford Mustang EcoBoost KOOKS Catback Exhaust w/Y pipe

    $1,310.38
    Free Shipping
    Looking to give your Ecoboost a little more power and a lot better sound? Kooks catback system with Y-pipe will do just that. This exhaust system is made out of stainless steel and features a 3" mandrel bent piping system. The sound improvement is great, but you'll really notice the horsepower and torque improvements through the RPMs as well. This 2015-2017 Ford Mustang EcoBoost exhaust system includes 4" polished stainless steel exhaust tips. FREE GROUND SHIPPING ON THIS KOOKS EXHAUST! Application: 2015, 2016, 2017 Ford Mustang
  • 2015-2017 Mustang GT BORLA S-Type Cat Back Exhaust 140629BC

    2015-2017 Mustang GT BORLA S-Type Cat Back Exhaust 140629BC

    $1,766.99
    Free Shipping
    Southern Car Parts is your leader in 2015-2017 Ford Mustang Borla Exhaust Systems!FEATURESLoud throaty exhaust note without the droneX-pipe and "S-Type" Stinger Mufflers included2.5" mandrel bent stainless steel tubing4" Black stainless steel tips w/ embossed Borla logoDirect bolt-on designFits 2015-2017 GT Fastback MustangsDESCRIPTIONAggressive Throaty Sound. Add an aggressive throaty exhaust note to your Coyote powered 2015 GT Fastback Mustang with a Borla Catback Exhaust System that features a pair of Stinger S-Type mufflers and 4" embossed chrome exhaust tips. This catback not only sounds great but also improves exhaust flow with the included X-pipe for an increase in horsepower and torque.  Race Car Growl. The included X-Pipe not only helps increase power, but it also adds a loud raspy, race car growl to the sound of your exhaust with its modern "X" crossover pipe design.  High-Quality Construction. Manufactured from ultra smooth mandrel bent 2.5" diameter stainless steel tubing to improve exhaust flow, this Borla catback exhaust system includes an X-pipe and features two straight-through "Stinger" mufflers with 4" chromed stainless steel tips that are embossed with the Borla logo for both aggressive sound and impressive looks.  Application. This Borla Stinger S-Type 2.5" Catback exhaust system is designed as a direct bolt-on replacement for all 2015 GT Fastback Mustangs equipped with the Coyote 5.0L V8 engine. Not compatible with convertibles.  Technical Note. The included mufflers are 49 state drive-by noise legal, not intended for use in the state of California.
  • 2015-2017 EcoBoost Mustang MRT Down-pipe - Race Catalyst

    2015-2017 EcoBoost Mustang MRT Down-pipe - Race Catalyst

    $299.00
    Free Shipping
    Your new Mustangs looks great, and sounds better, but as enthusiasts, we know that good isn't enough. The MRT Down-pipe designed for the 2015-2017 EcoBoost Mustang will provide you with horsepower and torque gains, an increase in fuel economy as well as additional depth to your Mustangs exhaust note! Engineered by MRT to take the place of the OE catalyst and intermediate tubes, this down-pipe is a direct bolt-in upgrade, requiring no cutting or welding to install.    The MRT Down-pipe free's up as much back-pressure as possible, without having to replace the entire cat-back. Meaning you can still see performance gains without losing the mild tone of the stock mufflers and mid-pipe. The downpipe replaces the factory down-pipe and catalytic converter with a high flow 3" 304ss exhaust pipe for optimum Horsepower, Torque and quality.    MRT's CNC mandrel bending technology ensures that all MRT exhaust systems have smooth bends and precise fit. MRT manufactures all of our exhaust out of the highest grade 304 Stainless Steel right here in the USA at the MRT Headquarters. We stand behind the quality of our exhaust systems with an industry leading LIMITED LIFETIME WARRANTY!    This MRT Down-pipe requires no modifications to your 2015-2017 EcoBoost Mustang, meaning this is a direct bolt-on part. MRT recommends a custom calibration whenever replacing the factory catalyst pipe to optimize performance.
  • 2015-2017 Ford Mustang KOOKS Axle Back Exhaust #11516200

    2015-2017 Ford Mustang KOOKS Axle Back Exhaust #11516200

    $692.34
    This 2015-2017 Ford Mustang GT Kooks Axle-Back exhaust system is sure to give you that tone that you remember from the 60s and 70s This exhaust system will give your Pony a very dead, muscle car sound. This exhaust system is made of 3" T304 stainless steel tubing and features polished exhaust tips. Kooks includes 4" round tips, making this a very good looking system that also performs extremely well. Application: 2015, 2016, 2017 Ford Mustang
  • 2015-2017 Mustang GT Borla S-Type Cat Back 140590BC

    2015-2017 Mustang GT Borla S-Type Cat Back 140590BC

    $1,399.99
    Free Shipping
    If you're looking to increase the exhaust flow for your 2015-2017 5.0L V8 Mustang, look no further than the Borla Mustang S-Type Exhaust. Manufactured by Borla, an industry leader in performance and build quality, the Mustang S-Type exhaust is sure to provide your Mustang with the exhaust note it should have had from the factory. The Borla S-Type System is exemplified by a powerful, loud, and aggressive exhaust tone, and also provides HP and Torque gains across the entire RPM range. Features a 2.5" exhaust pipes and 4" stainless tips. Application: 2015, 2016, 2017 Ford Mustang
  • 2015-2017 Mustang GT MRT Interceptor Cat-Back w/ DMS - (Coupe Only)

    2015-2017 Mustang GT MRT Interceptor Cat-Back w/ DMS - (Coupe Only)

    $1,399.00
    Free Shipping
    When it comes to Mustang Performance, MRT doesn't cut any corners, and that statement stands true with our new line of 2015-2017 MRT exhaust systems. It's true that we only utilize the best materials in the industry, and we have an industry leading LIMITED LIFETIME WARRANTY; but for the engineering team here at MRT, it's more than that. We know that the Mustang is an iconic American muscle car, that being said, it should absolutely sound like one. Unlike most, MRT takes the additional step to utilize an H-pipe design, giving your Mustang a deep, aggressive tone; unlike the X-pipe design, which produces a higher pitched, raspy sound.  The 2015-2017 5.0 Mustang GT MRT Catback Exhaust system is 3" 304 Stainless Steel, replacing the OE mid-muffler with the MRT DMS as well as the heavy rear mufflers saves your Mustang an incredible 10-20lbs (varies based on muffler choice). This exhaust is designed to offer the most airflow throughout your exhaust without effecting Emission standards or requiring any modifications to be made to the OE exhaust. Our team of engineers optimized three key elements during the design process: (1) tube diameter, (2) smoothness of the exhaust path, and (3) back-pressure. MRT's CNC mandrel bending technology ensures that our Catback Exhaust has smooth bends and precise fit. MRT hand makes our exhaust systems out of the highest grade 304 Stainless Steel right here in the USA at the MRT Headquarters. We stand behind the quality of our exhaust systems with an industry leading LIMITED LIFETIME WARRANTY!  What is the DMS you ask? It's the newly designed Drone Management System by MRT to control any resonation created by aftermarket exhaust systems. Here at MRT, it wasn't good enough to have one of the most aggressive exhaust systems on the market for a 2015-2017 GT Mustang. We took it one step further, to ensure our customers don't avoid long drives to the beach due to discomfort caused by DDS (Dreadful Drone Syndrome). The MRT Catback Exhaust requires no modifications to your 2015-2017 GT Mustang, meaning this is a direct bolt-on part. We also offer this catback with a sinister matte black Cerakote finish for the tips. The Cerakote finish is heat resistant and is covered under the standard MRT Warranty. Please note, this system is designed to fit Fastback models only. Application: 2015, 2016, 2017 Ford Mustang 
  • 2015-2019 Mustang GT American Racing Headers Bottle Neck Eliminator System

    2015-2019 Mustang GT American Racing Headers Bottle Neck Eliminator System

    $1,714.90
    Free Shipping
    As powerful as the Mustang GT is from the factory, this 2015-2019 Mustang GT American Racing Headers Bottle Neck Eliminator System will help you get even more power from your Mustang This system will connect to your aftermarket exhaust to maximize its power without buying un-needed parts. This system for the Mustang GT will bolt in quickly and give you more power throughout the entire RPM range. The latest generation of Mustangs brought performance and handling to a whole new level, but power and torque as still waiting to be unleashed from an anemic factory exhaust. With header systems in 1-3/4" or 1-7/8" and a 3" exhaust, our Bottleneck Eliminator Kit unlocks that power with performance gains up to 30 RWHP and does away with the 2-1/4" restriction at the Catback connection point. Designed to work with aftermarket Catbacks exclusively, a simple mark and cut (no welding required) mates the ARH Bottleneck Eliminator to your Catback. Comes with a 3" X-Pipe standard. A.R.H. has what you need to exhaust the beast within. Now available is the 100% U.S. made long tube 304 S/S header systems that are designed to fit great, install easily and produce outstanding horsepower and torque. The system comes with everything you'd expect from A.R.H. This header system includes 3/8" thick flanges with tig welded and hand ported inlets, merge collectors with scavenger spikes, 200 cell metallic substrate cats, OEM style band clamps, Grade 8 hardware, and Flat Out Racing Gaskets. NOTE: FOR ALL BOTTLE NECK ELIMINATOR SYSTEM PLEASE SPECIFY CATBACK SIZE AND BRAND. Application: 2015, 2016, 2017, 2018, 2019 Mustang GT
  • 2015-2017 Ford Mustang Eco Boost Borla Rear Section Exhaust ATAK 11890

    2015-2017 Ford Mustang Eco Boost Borla Rear Section Exhaust ATAK 11890

    $772.99
    Free Shipping
    If you're looking to increase the exhaust flow for your Eco Boost Mustang, look no further than a premiere Borla exhaust. Manufactured by Borla, an industry leader in performance and build quality, this exhaust is sure to provide your Mustang with all of the best benefits of an Rear Section Exhaust. The ATAK Multi-Core exhaust system has become renowned for its incredible quality. This exhaust provides a fantastic aggressive exhaust note with minimal cabin drone, and will also give the Mustang optimal HP and Torque gains across the entire RPM range. This system comes the rear  2.25" stainless steel mufflers and features 4.0" polished stainless steel exhaust tips. Borla is famous for their 1,000,000 mile warranty. So you are covered for as long as your own your Mustang. FREE GROUND SHIPPING ON THIS PRODUCT!
  • 2015-2017 Ford Mustang GT 5.0 MBRP Exhaust 3" Cat Back Dual Split Rear Race Version 4.5" tips

    2015-2017 Ford Mustang GT 5.0 MBRP Exhaust 3" Cat Back Dual Split Rear Race Version 4.5" tips

    $634.99
    XP SERIES Rugged and dependable our XP Series is made of T409 stainless steel. It's designed and built to stand up to the harshest road conditions. We are so sure that our XP Series has what it takes that we have given it an amazing Lifetime warranty. That is absolutely the best warranty for a T409 system in the industry. (This series may develop surface rust which is not covered by this warranty.)   Dyno Proven Your MBRP muscle car system has undergone countless hours on our in-house Mustang 1100 AWD-SE Chassis Dynomometer, hundreds of miles on road and track and numerous tweaks and modifications to get maximum performance. From the vehicle specific muffler design to the fully mandrel bent tubing to minimal bend degree angles, your MBRP performance system gets exhaust out fast. An MBRP performance exhaust system is the starting point to getting the most from cold air intakes, programmers, modules and downloaders.     Built to Perform MBRP's performance exhaust systems are built to perform. Designed to maximize exhaust flow and minimize exhaust temperatures your ride will use less gas, last longer and perform better. Every system we sell has been built to the most exacting standards in the industry.   Easy Installation MBRP systems are as much fun to install as to drive with on your muscle car. Bolt-on, no weld design makes installation a no hassle one and a half to two hour project. Everything is direct fit to the OEM hangers and you get all the clamps and parts you will need, all in one box.   Sound & Style Performance is one thing but at MBRP we believe that appearance and sound are just as important. Every MBRP performance exhaust system has been specifically tuned to get the optimal sound from your ride. Civilized when you need it to be and seriously aggressive when you want it, it is all classic muscle car. With our stamped logo on the tip and our unmistakable styling, there's no question that you have the hottest performance exhaust on the road - MBRP.
  • 2015-2017 Ford Mustang EcoBoost MagnaFlow Exhaust System 19097

    2015-2017 Ford Mustang EcoBoost MagnaFlow Exhaust System 19097

    $1,406.00
    Free Shipping
    Made in the USA and engineered to last, for those seeking increased performance and better economy, MagnaFlow Street Series Performance This 2015-2017 Ford Mustang Ecoboost Exhaust system deliver the smooth deep sound you want and the wide-open performance power you need. Our exhaust systems feature straight-through flow designs for the ultimate in unrestricted horsepower and torque for big power while maintaining exhaust efficiency. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. •Made in the U.S.A. •All Mandrel Bent Tubing •409 Stainless Steel Construction •Increased Horsepower and Torque •Lifetime Construction Warranty Features and Benefits: - Made From 2-1/2" Stainless Steel Mandrel Bent Tubing - Proven to Increase both Horsepower and Torque - 4-1/2" Polished Stainless Steel Tips - Deep Street Friendly Exhaust Note - All Welded Construction and Built To Last - Easy Bolt-In Installation Application: 2015, 2016, 2017 Ford Mustang
  • 2015-2019 Mustang GT American Racing Headers Long Exhaust System

    2015-2017 Mustang GT American Racing Headers Long Exhaust System

    $1,971.45
    Free Shipping
    As powerful as the Mustang GT is from the factory, this 2015-2017 Mustang GT American Racing Headers Long Exhaust System will help you get even more power from your Mustang. Our complete ARH Long Tube Header Package to the rear axle for the Mustang GT will bolt in quickly and give you more power throughout the entire RPM range. This is a complete Mustang header package, Long Tube Headers, Mid Pipes, X pipe, O2 Extension Harness, gaskets and clamps. Everything you need for a complete American Racing Header installation all the way back to the rear mufflers. This system will bolt to the factory exhaust or any other axle back exhaust system. A.R.H. has what you need to exhaust the beast within. Now available is the 100% U.S. made long tube 304 S/S header systems that are designed to fit great, install easily and produce outstanding horsepower and torque. The system comes with everything you'd expect from A.R.H. This header system includes 3/8" thick flanges with tig welded and hand ported inlets, merge collectors with scavenger spikes, 200 cell metallic substrate cats, OEM style band clamps, Grade 8 hardware, and Flat Out Racing Gaskets. The exhaust system is all 3" and extends to the rear axle where it connects to the 3" tailpipes. Application: 2015, 2016, 2017 Mustang GT
  • 2015-2017 Ford Mustang Eco Boost Borla Cat-Back Exhaust ATAK 140585

    2015-2017 Ford Mustang Eco Boost Borla Cat-Back Exhaust ATAK 140585

    $1,299.99
    Free Shipping
    If you're looking to increase the exhaust flow for your Eco Boost Mustang, look no further than a premiere Borla exhaust. Manufactured by Borla, an industry leader in performance and build quality, this exhaust is sure to provide your Mustang with all of the best benefits of an Axle-Back Exhaust. The ATAK Multi-Core exhaust system has become renowned for its incredible quality. This exhaust provides a fantastic aggressive exhaust note with minimal cabin drone, and will also give the Mustang optimal HP and Torque gains across the entire RPM range. This system comes in a 2.25" stainless steel pipe and features 4.0" polished stainless steel exhaust tips. Borla is famous for their 1,000,000 mile warranty. So you are covered for as long as your own your Mustang. FREE GROUND SHIPPING ON THIS PRODUCT! Application: 2015, 2016, 2017 Ford Mustang
  • 2015-2017 Ford Mustang GT Exhaust 3" Cat Back Dual Split

    2015-2017 Ford Mustang GT Exhaust 3" Cat Back Dual Split

    $534.99
    Performance Series Designed to provide maximum performance and maximum value our Performance Series features 100% aluminized steel at a no-nonsense price. These systems are designed to provide the MBRP performance and sound you've grown to love to those operating on a budget. Featuring a two piece tail pipe and bolt on hangers these systems fit and perform just like our more expensive series at a price point that cannot be beaten. Dyno ProvenYour MBRP muscle car system has undergone countless hours on our in-house Mustang 1100 AWD-SE Chassis Dynomometer, hundreds of miles on road and track and numerous tweaks and modifications to get maximum performance. From the vehicle specific muffler design to the fully mandrel bent tubing to minimal bend degree angles, your MBRP performance system gets exhaust out fast. An MBRP performance exhaust system is the starting point to getting the most from cold air intakes, programmers, modules and downloaders. Built to PerformMBRP's performance exhaust systems are built to perform. Designed to maximize exhaust flow and minimize exhaust temperatures your ride will use less gas, last longer and perform better. Every system we sell has been built to the most exacting standards in the industry. Easy InstallationMBRP systems are as much fun to install as to drive with on your muscle car. Bolt-on, no weld design makes installation a no hassle one and a half to two-hour project. Everything is direct fit to the OEM hangers and you get all the clamps and parts you will need, all in one box. Sound & StylePerformance is one thing but at MBRP we believe that appearance and sound are just as important. Every MBRP performance exhaust system has been specifically tuned to get the optimal sound from your ride. Civilized when you need it to be and seriously aggressive when you want it, it is all classic muscle car. With our stamped logo on the tip and our unmistakable styling, there's no question that you have the hottest performance exhaust on the road - MBRP. Application: 2015, 2016, 2017 Ford Mustang
  • 2015-2017 Ford Mustang GT Corsa Axle-Back Touring Exhaust System 14329

    2015-2017 Ford Mustang GT Corsa Axle-Back Touring Exhaust System 14329

    $1,631.99
    Free Shipping
    3.0" Axle-Back, Dual Rear Exit with Single 4.5" Polished Pro-Series Tips CORSA's Patented Reflective Sound Cancellation® (RSC) Technology allows acoustic engineers to create a drone free exhaust sound, styled specifically to fit the personality of your vehicle. Each system is designed to increase vehicle performance, deliver an AGGRESSIVE SOUND under acceleration and a DRONE-FREE EXPERIENCE during cruise. Performance gains are not affected by sound choice. Patented No Drone, Reflective Sound Cancellation (RSC) Technology   Custom Tuned, Aggressive Exhaust Note   No Drone At Cruise   304 Stainless Steel Construction   Dual Walled, Polished Stainless Steel Tips   Flows 45.99% Better Than Stock Easy Bolt-On Installation   Detailed Printed Instructions Included, Full-Color Available Online   No Welding Required   Made in the U.S.A.
  • 2015-2017 Mustang GT AWE Dual Tip Axle Back Track Edition 3020-32026

    2015-2017 Mustang GT AWE Dual Tip Axle Back Track Edition 3020-32026

    $349.00
    Free Shipping
    If you are looking to make your Mustang GT as loud as posable this 2015-2017 Mustang GT AWE Dual Tip Axle Back Track Edition 3020-32026 is what you are looking for. These 304 stainless steel pipes are a powerful sounding upgrade for your Mustang GT. This axel-back exhaust system is a full 3" system for maximum power and exhaust flow. Replacing your factory muffler with this AWE axel-back exhaust system will save weight and give your Mustang a more aggressive sound. These dual tip mufflers fit perfectly into the factory rear valance for a factory look. Without mufflers, your Mustang will be super loud and maybe too loud for your neighbors or your competition!   Features:โ— Proudly engineered, designed, and manufactured in-house, in the USAโ— Peak gains of 11 hp and 5 ft-lbs of torque, and max gains of 16 hp and 10 ft-lbs of torque to the crankโ— Handcrafted from 3” U.S.-sourced CNC mandrel-bent .065” wall T304L stainless steelโ— 4.5” double-walled tips in chrome silver or diamond blackโ— Less is more: clean, non-baffled, straight-through design maximizes performanceโ— Direct bolt-on system means factory-like simplicityโ— No Check Engine Light -- Guaranteedโ— Perfect Fitment -- Guaranteedโ— Featuring the AWE Lifetime Exhaust Warranty Application: 2015, 2016, 2017 Mustang GT Coupe, Convertible
  • 2015-2017 Ford Mustang GT 5.0 Convertible MBRP Exhaust 3" Cat Back Dual Split Rear Street Versi

    2015-2017 Ford Mustang GT 5.0 Convertible MBRP Exhaust 3" Cat Back Dual Split Rear Street Versi

    $744.99
    XP SERIES Rugged and dependable our XP Series is made of T409 stainless steel. It's drsigned and built to stand up to the harshest road conditions. We are so sure that our XP Series has what it takes that we have given it an amazing Lifetime warranty. That is absolutely the best warranty for a T409 system in the industry. (This series may develop surface rust which is not covered by this warranty.)   Dyno Proven Your MBRP muscle car system has undergone countless hours on our in-house Mustang 1100 AWD-SE Chassis Dynomometer, hundreds of miles on road and track and numerous tweaks and modifications to get maximum performance. From the vehicle specific muffler design to the fully mandrel bent tubing to minimal bend degree angles, your MBRP performance system gets exhaust out fast. An MBRP performance exhaust system is the starting point to getting the most from cold air intakes, programmers, modules and downloaders.   Built to Perform MBRP's performance exhaust systems are built to perform. Designed to maximize exhaust flow and minimize exhaust temperatures your ride will use less gas, last longer and perform better. Every system we sell has been built to the most exacting standards in the industry.   Easy Installation MBRP systems are as much fun to install as to drive with on your muscle car. Bolt-on, no weld design makes installation a no hassle one and a half to two hour project. Everything is direct fit to the OEM hangers and you get all the clamps and parts you will need, all in one box.   Sound & Style Performance is one thing but at MBRP we believe that appearance and sound are just as important. Every MBRP performance exhaust system has been specifically tuned to get the optimal sound from your ride. Civilized when you need it to be and seriously aggressive when you want it, it is all classic muscle car. With our stamped logo on the tip and our unmistakable styling, there's no question that you have the hottest performance exhaust on the road - MBRP.
  • 2015-2017 Ford Mustang GT Corsa Cat Back Sport Exhaust System 14332

    2015-2017 Ford Mustang GT Corsa Cat Back Sport Exhaust System 14332

    $2,053.99
    Free Shipping
    3.0" Cat-Back, Dual Rear Exit with Single 4.5" Polished Pro-Series Tips CORSA's Patented Reflective Sound Cancellation® (RSC) Technology allows acoustic engineers to create a drone free exhaust sound, styled specifically to fit the personality of your vehicle. Each system is designed to increase vehicle performance, deliver an AGGRESSIVE SOUND under acceleration and a DRONE-FREE EXPERIENCE during cruise. Performance gains are not affected by sound choice. Patented No Drone, Reflective Sound Cancellation (RSC) Technology   Custom Tuned, Aggressive Exhaust Note   No Drone At Cruise   304 Stainless Steel Construction   Dual Walled, Polished Stainless Steel Tips   Flows 48.35% Better Than Stock   7lbs Lighter Than Stock   Easy Bolt-On   Installation Detailed Printed Instructions Included,Full-Color Available Online   No Welding Required   Made in the U.S.A.
  • Premium Stainless Steel Exhaust Tips Polishing Kit

    Premium Stainless Steel Exhaust Tips Polishing Kit

    $39.95
    So you have spent over $1,000 upgrading your exhaust on your new car and it sounds great and you could not be happier. Until you walk behind your car and see your once shiny exhaust tips covered in soot and road grime. So you wipe them off and a week later they look just as bad as they did before. So this time you throw some wax on them, but that caused them to yellow and trap more dirt. You need a special polish for your exhaust tips that not only cleans the dirt off but seals them so they stay looking great. Our premium stainless steel polishing kit does just that. Our kit includes 2 large professional grade buffing compound sticks to bring back the shine on even the worse looking exhaust tips. A 4" buffing wheel to make cleaning your exhaust tips quick and easy. 2 special cloths for cleaning your exhaust tips at home and one to take along to shows to get your car ready for judging. And unlike other polishing kits, we also include a bottle of Simichrome Polish. Simichrome Polish puts a show winning shine on your exhaust tips and seals them so that they do not get stained like they used to anymore. We also include a set of photo detailed instructions to make cleaning your exhaust tips quick and easy. Our basic kit includes:  4” High-Quality Mushroom Buff w/ drill adapter 2 Special buffing compounds designed to take stainless steel to the next level A supply of Simichrome polish, the best polish hands down (cost $13 alone) 2 Special maintenance cloths (one for your garage and one to keep in the hatch compartment) Detailed Photo Instructions Our Super Deluxe kits include: Everything in the Standard Kit, plus The New 2" Taper Buff w/drill Adapter (to power buff the outside)  Don't think that this kit is only good for polishing exhaust tips.This kit will also allow you to polish any uncoated metal and even dull plastics. So now you can clean and maintain the stainless and chrome trim on your classic cars and the plastic trim on your daily driver as well. Our kit includes enough polishing compound to last for years.   
  • 2015-2017 Ford Mustang GT Borla Cat-Back Exhaust ATAK # 140591

    2015-2017 Ford Mustang GT Borla Cat-Back Exhaust ATAK # 140591

    $1,486.99
    Free Shipping
    If you're looking to increase the exhaust flow for your Mustang GT, look no further than a premiere Borla exhaust. Manufactured by Borla, an industry leader in performance and build quality, this exhaust is sure to provide your Mustang GT with all of the best benefits of an aftermarket exhaust. Borla’s commitment to using top quality 304 stainless steel, Mandel-bent tubing, and their painstakingly engineered and revolutionary ATAK (Acoustically-Tuned Applied Kinetics) Multi-Core mufflers results in an amazing exhaust that just has to be heard to be believed! This exhaust provides a fantastic aggressive exhaust note with minimal cabin drone, and will also give the Mustang optimal HP and Torque gains across the entire RPM range. FEATURES Loud aggressive sound X-pipe and "ATAK" race inspired mufflers included 2.5" mandrel bent stainless steel tubing 4" chromed stainless steel tips w/ embossed Borla logo Direct bolt-on design Fits 2015 GT Fastback Mustangs DESCRIPTION Loud Aggressive Sound. Add a touch of Borla excellence to your Coyote powered S550 GT Mustang with an "ATAK" cat back exhaust system. A Borla "ATAK" catback system will significantly increase exhaust flow over the restrictive stock factory exhaust system for a dramatic increase in rear wheel horsepower and an aggressive muscle car sound that is not for the faint of heart. Race Car Growl. The included Borla X-Pipe not only helps increase power and performance, but it also adds a more raspy, race car like growl to the sound of your exhaust with its modern "X" crossover pipe design.  ATAK. Acoustically-Tuned Applied Kinetics is Borla's newest technology that produces the highest available dB (decibel) levels to pump the volume while retaining clarity of sound, avoiding distortion typically found in louder exhausts.  High-Quality Construction. Manufactured from ultra smooth mandrel bent 2.5" diameter T-304 stainless steel tubing to improve exhaust flow, this Borla catback exhaust system includes an X-pipe and features (2) race inspired "ATAK" mufflers with 4" chromed stainless steel tips that are embossed with the Borla logo for both impressive looks and great sound.  Application. This Borla ATAK 2.5" Catback exhaust system is designed as a direct bolt-on replacement for all 2015 GT Fastback Mustangs equipped with the Coyote 5.0L V8 engine. Does not fit convertible models. Borla is famous for their 1,000,000 mile warranty. So you are covered for as long as your own your Mustang. FREE GROUND SHIPPING ON THIS PRODUCT! Application: 2015, 2016, 2017 Ford Mustang
  • 2015-2018 Ford Mustang 2.3L Ecoboost MBRP Exhaust 3" Cat Back Dual Split Rear STREET VERSION 4.

    2015-2018 Ford Mustang 2.3L Ecoboost MBRP Exhaust 3" Cat Back Dual Split Rear STREET VERSION 4.

    $729.99
    Black Series For the hottest look on the market right now look no further than MBRB's new Black Series. Using a high heat coating that is designed specifically for exhaust applications, our new Black Series is sure to turn heads and provide excelent performance for years to come.Utilizing the same manufacturing process as our stainless systems you know these systems will fit right the first time. Our Black Series features a 1 year Warranty on the coating and a 3 year warranty on the exhaust components.   Dyno Proven Your MBRP muscle car system has undergone countless hours on our in-house Mustang 1100 AWD-SE Chassis Dynomometer, hundreds of miles on road and track and numerous tweaks and modifications to get maximum performance. From the vehicle specific muffler design to the fully mandrel bent tubing to minimal bend degree angles, your MBRP performance system gets exhaust out fast. An MBRP performance exhaust system is the starting point to getting the most from cold air intakes, programmers, modules and downloaders.   Built to Perform MBRP's performance exhaust systems are built to perform. Designed to maximize exhaust flow and minimize exhaust temperatures your ride will use less gas, last longer and perform better. Every system we sell has been built to the most exacting standards in the industry.   Easy Installation MBRP systems are as much fun to install as to drive with on your muscle car. Bolt-on, no weld design makes installation a no hassle one and a half to two hour project. Everything is direct fit to the OEM hangers and you get all the clamps and parts you will need, all in one box.   Sound & Style Performance is one thing but at MBRP we believe that appearance and sound are just as important. Every MBRP performance exhaust system has been specifically tuned to get the optimal sound from your ride. Civilized when you need it to be and seriously aggressive when you want it, it is all classic muscle car. With our stamped logo on the tip and our unmistakable styling, there's no question that you have the hottest performance exhaust on the road - MBRP.

1-48 of 63

Page:
  1. 1
  2. 2

Grid List

Set Descending Direction

Roar Loud with Our 2015-2019 Mustang Exhaust

If you donโ€™t want to go crazy but you still want a nice deep rumbling sound, then you might consider one of our SLP LoudMouth axle-back 2015-2019 Mustang exhaust systems. These are a much easier install than the 2015-2019 Mustang cat-back exhaust. Although they are more affordable, you will still be able to gain some extra horsepower and MPGs with our V8 SLP Axle Back Exhaust Loudmouth. In fact, any exhaust system at Southern Car Parts is an upgrade from the stock exhaust and helps your Mustang perform better. Even our smoother sounding exhaust systems like our 2015-2019 Mustang GT exhaust systems designed by Corsa can give you a huge benefit over a stock equipped Mustang.

But maybe our best exhaust for 2015-2019 Mustang GT is our Borla exhaust systems. Borla is known for their perfect mix between great sound and performance enhancing abilities. Borla as a company, has been around for years making quality exhaust systems for everything from American-made trucks to Italian-made supercars.

With so many great choices and so many different configuration options, Southern Car Parts can see why you might be a little overwhelmed. If you need help deciding what 2015-2019 Mustang exhaust system is best for your application, please give us a call. Our knowledgeable and friendly staff can help you find a 2015-2019 Mustang GT exhaust, V6 Mustang exhaust or an exhaust system for your Ecoboost.

2015-2019 Ford Mustang Exhaust Systems

Minimal Price: $ 39.95 39.95

X