2016-2018 Camaro Air Intake Systems


2016-2018 Camaro Air Intake Systems

2016-2018 Camaro 6th Generation Air Intake Systems and High Flow Air Filters

The Chevrolet Camaro is a muscle car that has been built to fill your nerves with excitement. With its immense power, thr 6th Generation Camaro is all set to rule in terms of performance and durability. When you get your foot on the accelerator, you know that you’ve got a heavily engineered vehicle which is capable of some exciting performance. But have you ever considered improving that thrill at a low price? Just in case you haven’t then you have landed at the right place.

12 Item(s)

Grid List

Set Descending Direction
  • 2016-2018 Camaro K&N 63-3094 Air Intake System 3.6L V6 F/I

    2016-2018 Camaro K&N 63-3094 Air Intake System 3.6L V6 F/I

    $302.99
    Free Shipping
    2016-2018 Camaro K&N 63-3094 Air Intake System 3.6L V6 F/I - AllCold air intakes make your Camaros horsepower increase for the least amount of pocket change. With cooler and more air this is a great thing for performance.The K&N AirCharger 63-3094 air intake system replaces the restrictive factory air filter and air intake housing in select Chevrolet Camaro models. K&N air intakes are designed to dramatically reduce air intake restriction as they smooth and straighten air flow. This allows your Camaro’s engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The 63-3094 air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the same area as the previously removed air box, keeping the air filter away from the hot air in the engine. This allows cooler, denser air to be directed through a custom molded air intake tube into the engine’s throttle body for a guaranteed power gain. The oversized air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install requiring only a screwdriver, socket set and some wrenches. This air intake cannot be sold in California. It is not legal for use in California or other states adopting California emission standards. Guaranteed horsepower gainDesigned to improve throttle response and engine soundFree-flowing high density polyethylene tubeReplaces entire factory air intake systemK&N Million Mile Limited WarrantyLasts up to 100,000 miles before service is required (depending on driving conditions)Easy to install, usually in 90 minutes or lessEstimated Horsepower Gain 21.16 HP @ 5900 RPMReplacement Filter RC-5107Air Filter Color RedAir Filter Material Cotton GauzeAir Filter Outlet Shape RoundClamps Included 4Clamp Material Stainless SteelClamp Style Worm GearCouplers Included 2Product Style 63 Series Aircharger KitsIntake Pipe Color / Finish BlackIntake Pipe Material High-Density PolyethyleneStreet Legal In All US States NoTUV Approved (Europe) NoWeight 11.5 lb (5.2 kg)Product Box Height 14.5 in (368 mm)Product Box Length 24.1 in (612 mm)Product Box Width 15.5 in (394 mm)California Restricted Not legal for sale or use in California
  • 2016-2018 6th Gen Camaro SS Momentum GT Pro Stage-2 Intake System

    2016-2018 6th Gen Camaro SS Momentum GT Pro Stage-2 Intake System

    $425.00
    Free Shipping
    2016-2018 6th Generation Camaro SS Momentum GT Pro 5R Stage-2 Intake System Unique One-Piece High Quality Housing W/ Sight Window:   A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to completely seal the auxiliary air scoop.   High Quality Tube:   This system uses a high quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Also included is a high quality billet aluminum crankcase fitting provided for easy installation. This tube has a built-in resonance chamber to catch un-wanted air intake noises.   High Quality Scoop:    A high quality CAD air scoop guides cool ambient air to the performance air filter.   Large 3-Layer Performance Air Filter:   This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cylindrical filter has a large oval (6-3/4" x 4-3/4") flange and is 9" tall inverted top Pro DRY S filter media. The Pro DRY S performance air filter features 3-layers of progressive finer porosity synthetic media providing  maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles.   Premium Hardware:    Premium stainless steel T-bolt clamps and a reinforced silicone elbow coupling are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.   Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.   Features:   Performance Data Coming Soon! High Quality One-Piece Roto-Molded Sealed Housing with Auxiliary Air Scoop CAD-Designed Roto-Molded Intake Tube w/ Resonance Chamber Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly Scoop snaps into air box and directs cool air into intake system for maximum performance and hassle-free installation Pro 5R pre-oiled, washable/reusable air filter for maximum performance Pro Dry S Oil-Free washable/reusable Filter For Maximum Convenience• Unique (Patent Pending) Filter-to-Housing Interface for Easy Installation No Cutting or Drilling on OEM Parts for Faster Installation   Application: 2016, 2017, 2018 Camaro
  • 250-609 Throttle Body Spacer for 2016 2017 Gen6 Camaro 3.6L V6

    2016-2018 6th Generation Camaro 3.6L V6 Airaid Throttle Body Spacer

    $144.00
    Free Shipping
    Increase both power and torque with this Airaid throttle body spacer for your 6th Generation V6 Camaro. Airaid designed this throttle body spacer to make maximum gains in the 800-3000 RPM range. Finished in a red aluminum this Camaro throttle body spacer will install in less than one hour.   Application: 2016, 2017, 2018 Camaro
  • 2016-2017 6th Generation Camaro Airaid Dry Intake Kit 251-333

    2016-2018 6th Generation Camaro Airaid Dry Intake Kit 251-333

    $384.00
    Free Shipping
    Since the 6th Generation Camaro SS doesn't have enough horsepower already....right? If you are not happy with over 400 horsepower already then it might be worth a second look to upgrade your factory airbox to a high flowing unit like this Airaid Dry Intake Kit. Airaid 251-333 is designed to make maximum power out of your 2016-2018 Camaro. Dyno tests show that this Airaid will give you 10 additional horsepower and 10 lb torque.The AIRAID MXP Air Intake System represents the ultimate in AIRAID’s cold air induction systems and delivers higher levels of horsepower and acceleration gains for specific Chevrolet Camaro SS models. This air intake starts with a replacement one-piece roto-molded air box that addresses all the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Additionally, this MXP air intake system has a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! This air intake system is backed by AIRAID’s No Hassle Lifetime Warranty.This unit is not legal in CA.   Application: 2016, 2017, 2018 Camaro
  • AIRAID 250-333 Oiled Intake Kit for 2016 2017 Gen6 Camaro SS

    2016-2018 Camaro SS Airaid Cold Air Intake 250-333

    $376.00
    Free Shipping
    Looking for a little more horsepower from your 6th Gen Camaro SS? If you are like us, you believe you can never have too much horsepower. Good thing Airaid provides such quality cold air intakes for the 2016+ Camaro. The AIRAID MXP Air Intake System represents the ultimate in AIRAID’s cold air induction systems and delivers higher levels of horsepower and acceleration gains for specific Chevrolet Camaro SS models. This air intake starts with a replacement one-piece roto-molded air box that addresses all the shortcomings of the restrictive factory design. Housed inside the air box is an AIRAID premium air filter for outstanding air flow and filtration. Air is directed through a new air intake tube constructed of cross-linked, high-density polyethylene that is designed using extensive computer modeling to maintain proper mass air flow readings and calibration. Additionally, this MXP air intake system has a built-in velocity stack, which further promotes airflow. What this all means is that you get a simple-to-install, yet extremely sophisticated system to increase air flow while maintaining proper air-to-fuel ratios, thereby eliminating the need for recalibration after installation. Just bolt it on and go! This air intake system is backed by AIRAID’s No Hassle Lifetime Warranty. Some AIRAID air intakes are not legal for sale or use in California and other states adopting California emission standards, while others are 50 state legal. View this product's vehicle applications to determine the legal status for each vehicle.   Application: 2016, 2017, 2018 Camaro
  • 2016-2017 Camaro SS Momentum GT Pro DRY S Stage-2 Intake System

    2016-2018 Camaro Momentum GT Pro DRY S Stage-2 Intake System

    $425.00
    Free Shipping
    Increasing the engine's overall performance is number one on every car guys list. The stock intake system is one of the most restricting parts on your vehicle by limiting the amount of air the engine receives. Replacing the stock cold air intake will add horsepower and torque you can hear and feel. The more air your engine gets, the more power it will produce. aFe's  Momentum Series Cold Air Intakes are designed using the most up-to-date engineering tools and techniques to provide you with the perfect blend of power and protection.Unique One-Piece High-Quality Housing W/ Sight Window:A custom CAD designed roto-molded housing made from heat soak resistant material eliminates the use of multiple components and ensures the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene. A urethane plug is also included if you wish to completely seal the auxiliary air scoop.High-Quality Tube:This system uses a high-quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. Also included is a high-quality billet aluminum crankcase fitting provided for easy installation. This tube has a built-in resonance chamber to catch unwanted air intake noises.High-Quality Scoop: A high-quality CAD air scoop guides cool ambient air to the performance air filter.Large 3-Layer Performance Air Filter:This Momentum GT intake system was designed around the largest filter possible to allow maximum performance and filtration. This cylindrical filter has a large oval (6-3/4" x 4-3/4") flange and is 9" tall inverted top Pro DRY S filter media. The Pro DRY S performance air filter features 3-layers of progressive finer porosity synthetic media providing maximum convenience with 100% polyurethane frame for long life and multiple cleaning cycles.Premium Hardware: Premium stainless steel T-bolt clamps and a reinforced silicone elbow coupling are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation.Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles. Fitment: 2016-2018 Chevrolet Camaro Pro DRY S Oil-Free, dry synthetic media.WORLD'S EASIEST AIR FILTEREasier to service than conventional, oil-impregnated pleated media or foam filtersSignificant airflow increasePro DRY S provides dramatic airflow increases for improved horsepower and torque performance with 99.2% filtration efficiency   Pro 5RMaximum airflow, maximum gainsPro 5R provides the highest airflow levels for the largest gains in horsepower and torque for times when performance is everythingProgressive filtration with protection and performanceOnly aFe's Pro 5R media is progressive in nature, offering 5 layers of progressively more tightly woven cotton gauze for protection levels in the high 98% range without sacrificing airflowApplication: 2016, 2018 Camaro
  • 2016-2017 Camaro SS K&N Typhoon Cold Air Intake 69-4519TP

    2016-2018 Camaro SS K&N Typhoon Cold Air Intake

    $329.99
    Free Shipping
    Get the most our of your Camaro SS with this K&N Typhoon Cold Air Intake kit. Dyno tested to add 18.2HP to a stock 6th Gen Camaro SS. The Camaro SS already performs like crazy, but a little extra HP never hurts!The K&N 69-4519TP Typhoon air intake system is a free-flowing, mandrel-bent aluminum tube air induction system designed to fit some Chevrolet Camaro SS models. The restrictive factory air filter and air intake housing are replaced by the K&N Typhoon air intake which is designed to dramatically reduce air flow restriction as it smoothes and straightens air flow. This allows your engine to inhale a larger amount of air than the factory air intake. More air means more usable power and acceleration throughout the engine’s RPM range. The 69-4519TP air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the previous air box space. Air is directed through the intake tube into the engine’s throttle body for a guaranteed power gain. The intake tube has a chrome-like finish that's made to last and accommodates the factory mass air sensor and a replacement silicone crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using existing factory mounting points. The tools needed are a couple of screwdrivers, a ratchet set and several wrenches. Some Typhoon air intakes are not legal for sale or use in California and other states adopting California emission standards while others are CARB exempt and 50 state legal. Check the K&N catalog or website for vehicle applications and specific CARB status for each vehicle and air intake.   Application: 2016, 2017, 2018 Camaro
  • 2016 2017 Gen6 Camaro SS K&N Air Filter 33-5047

    2016-2018 6th Generation Camaro SS K&N Air Filter 33-5047

    $63.99
    Give your Camaro a little more horsepower and a little better fuel economy with this drop in replacement filter. The K&N filter comes back by a lifetime warranty so you'll never have to worry about changing filters in your 2016-2018 Camaro SS again. Drop this in and roll down the road. This K&N filter will not void your factory warranty and is emissions 50 state legal. This K&N filter fits all 6th Generation SS 6.2L Camaros.   Application: 2016, 2017, 2018 Camaro
  • 2016-2018 Camaro 6.2 Cold Air Inductions Inc. Cold Air Intake System

    2016-2018 Camaro 6.2 Cold Air Inductions Inc. Cold Air Intake System

    $395.15
    Free Shipping
     Maximize your vehicle's performance with a Cold Air Inductions Inc. Air Intake System. Our Systems represent the highest quality in the marketplace due to superior materials and craftsmanship. The systems have insulated airboxes with a removable lid and a filter inspection window. Other features include thermal coated intake tubes to reduce heat soak.  All of our performance gains are backed up with accurate and real world dyno testing.    This product is a direct replacement for the OEM air intake system. No modifications required.   Gains: + 11 rwhp + 26 ft-lb Torque  + Up to 4 MPG Increase in fuel economy                                                                                                                                                                                                           Performance gains indicated is to the wheels (whp), with tests done on an otherwise stock vehicle. We test our intake systems under real driving conditions, and dyno test to the wheels with the hood closed. Many competitors test with the hood open and advertise gains at the crank, which results in inflated hp numbers that do not represent real world performance gains.   Intake System Includes: • Insulated Air Box • Air Box Lid with viewing window for easy filter inspection • 4.0"  (102mm) Thermal Coated Intake Tube • High-Performance Air Filter (CF-8400) • Black Silicone Coupler / Stainless Clamps • Installation instructions (NOT LEGAL FOR SALE OR USE IN CALIFORNIA) Application: 2016, 2017, 2018 Camaro  
  • 2016-2017 Camaro K&N Blackhawk Air Intake Intake System

    2016-2018 Camaro K&N Blackhawk Air Intake Intake System

    $363.99
    Free Shipping
    The K&N Blackhawk Induction Air Intake System is a free-flowing, mandrel-bent aluminum tube air intake system that is guaranteed to gain power. It will replace the restrictive factory air filter and air intake housing on 2016-2018 Camaro SS models. K&N's low restriction air intake allows your engine to inhale a larger amount of air than it would from the stock air intake. More air means more power and acceleration. This K&N Blackhawk Induction Air Intake System comes with black components including the K&N high-flow air filter with heat shield. The attractive textured black powder-coated tube features a welded, engraved K&N plate giving you a clean, high-performance look under the hood. The intake tube accommodates the factory mass air sensor and crank case vent hose. The oversized cone shaped air filter is made from an oil-free synthetic filter media that can be used for up to 100,000 miles before cleaning is needed depending on driving conditions. This air intake is relatively easy to install usually in 90 minutes or less using the existing factory mounting points using commonly available tools. This K&N Blackhawk Induction Systems is not legal for sale or use in California and other states adopting California emission standards.  
  • K&N Aircharger Intake 63-3092 for 2016 2017 Gen6 Camaro SS

    2016-2018 6th Generation Camaro SS K&N Aircharger Intake 63-3092

    $274.99
    Free Shipping
    Your 2016-2018 6th Gen Camaro already makes huge horsepower numbers, but this K&N intake will take your Camaro SS to a whole new level. This intake kit will give your 6.2L another 24HP and 18LB!! Those numbers are incredible. A simply bolt in intake and you can really fell the extra power.The K&N 63-3092 AirCharger is designed to reduce air intake restriction and smooth and straighten air flow for your Gen6 Camaro SS. Air is directed through an aerodynamically engineered intake tube into the engine’s throttle body for a guaranteed power gain. The tube accommodates the factory mass air sensor and crank case vent hose. The 63-3092 AirCharger comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space.The K&N 63-3092 AirCharger air intake system replaces the restrictive factory air filter and air intake housing on specific Chevrolet Camaro SS models. K&N air intakes are designed to dramatically reduce air intake restriction as well as smooth and straighten air flow. This allows your engine to inhale a larger amount of air than the factory air filter assembly. More air means more usable power and acceleration throughout the engine’s RPM range. The air intake comes with a chrome topped K&N high-flow air filter and a heat shield that installs into the original air box space. Air is directed through an aerodynamically engineered intake tube into the engine’s throttle body for a guaranteed power gain. The tube accommodates the factory mass air sensor and crank case vent hose. The oversized cone shaped air filter can be used for up to 100,000 miles before servicing is needed depending on driving conditions. This air intake is relatively easy to install, usually in 90 minutes or less using your vehicle’s existing factory mounting points.   Application: 2016, 2017, 2018 Camaro
  • 2016-2018 6th Generation Camaro SS 6.2 L Mishimoto Cold Air Intake

    2016-2018 6th Generation Camaro SS 6.2 L Mishimoto Cold Air Intake

    $363.60
      Add horsepower and sound to your ride with the new Mishimoto Performance Air Intake. This kit is engineered specifically for your car and includes everything needed to replace the restrictive stock airbox. Installation is quick and simple, perfect for some extra punch on the street or autocross course. The Mishimoto Air Intake includes everything needed for installation, installs in under one hour, and works perfectly with the stock tune. The mandrel-bent aluminum intake pipe is available with a polished or powder-coated finish. This pipe utilizes a CNC-machined mass airflow sensor (MAF) housing to provide accurate and consistent MAF readings, which translates into a smooth power band. To reduce air intake temperatures, a powder-coated heat shield is placed between the air filter and hot exhaust manifold, significantly reducing heat-soak. The Mishimoto free-flowing air filter provides an 85% greater surface area, optimal airflow, and proper filtration of dirt and debris. The included Mishimoto oiled air filter is completely serviceable, allowing for a lifetime of reliable use. Additionally this intake kit includes a silicone coupler, clamps, and all other hardware necessary to complete a quick installation for easy bolt-on power. Along with an upgrade in power, this intake also provides an aggressive and rich intake tone that is a huge improvement over the stock intake. The Mishimoto Performance Air Intake is designed in Delaware, USA and includes the Mishimoto Lifetime Warranty.       Application: 2016, 2017, 2018 Camaro

12 Item(s)

Grid List

Set Descending Direction

Top Cold Air Intakes from all leading manufacturers like Airaid, aFe Control, Green, Cold Air Inductions, Inc and K&N

Southern Car Parts is known in the aftermarket for its great collection of parts and accessories. We flaunt a bevy of many cold air intakes from trustworthy brands like AFE Control, K&N Filters, Green, Air Aid and more. If you want to give your Camaro 2016/2017 a little more horsepower then you can't go wrong with any of our Cold Air Intake Systems that are available for Camaros of all ages and suit budgets of all sizes.

Upgrading your 6th Generation Camaro air intake with an aftermarket product will make some important and noteworthy differences to your car. A boosted intake will provide you with better fuel usage in order to save you money, increased engine power and better throttle response. This means that an already tough Camaro becomes tougher, quicker and more responsive while at the same time it actually saves you fuel costs. The high flow air filters mean putting more air into the engine without having to worry about anything that can cause damage, getting into it. And the best deal is that even with this long list of features, an intake which boasts an advanced filtration technology won’t cost you much!

Why Choose an Aftermarket Air Intake For Your 2016-2018 Camaro

  • Engineered to increase horsepower and torque

  • High flow air filters at low cost

  • Improves restrictive factory air intake system

  • Easy to install performance kit

  • Enhanced Engine Sound

  • Cleaning not needed up to 100,000 miles of use

Add more horsepower to your 6th Generation Chevrolet Camaro with a Southern Car Parts air intake system.You can find a large range of them here.