American Racing Mustang Headers


American Racing Mustang Headers

NULL

5 Item(s)

Grid List

Set Descending Direction
  • 2011 and newer Mustang V6 American Racing Long Tube Headers

    2011 and newer Mustang V6 American Racing Long Tube Headers

    $1,470.00
    Free Shipping
    Complete Performance Long Tube American Racing Headers for the 2011 and newer Ford Mustang V6 New from American Racing Headers is their complete longtube header system for the 2011-2012 Mustang with the 3.7L V6 featuring 1 3/4" Primaries and 2 1/2" x 2 1/2" collectors and x-pipe. These new 3.7L Mustang V6 motors make an impressive 300HP stock, but have so much more potential. A complete header system will increase exhaust flow in your Mustang and provide gains to HP and Torque across the RPM range, as well as provide an incredibly upgraded exhaust tone and volume. System will bolt up directly to the stock axle-back exhaust system, or will work in conjunction with any aftermarket axle-back exhaust. Please note that installation of headers typically requires a tune for proper performance. The amount of air flow through the exhaust and performance changes the headers provide changes the manner in which the engine runs and for this reason a tune is advised. Non-Catted X-Pipe systems are intended only for off-road use. Please select your desired system from the drop-down menu below.
  • 2005-10 Mustang 3 Valve American Racing Headers

    2005-10 Mustang 3 Valve American Racing Headers

    $1,454.98
    Free Shipping
    American Racing Headers Long Tube system for the 2005-2010 3 Valve Ford Mustangs American Racing Headers has manufactured another top-quality header system, this time for the 2005-08 Ford Mustang GT. Manufactured entirely using the highest quality 304 Stainless Steel, this system has been engineered for fantastic fit and outstanding performance increases. This American Racing Headers long tube system is designed with a number of great features to increase its quality in every way imaginable. With 3/8" thick flanges, merge collectors with scavenger spikes, a direct bolt-in X-pipe,  and your choice of off-road cat-less or high strength metallic substrate cats, no other product on the market really compares. System is available in both 1 5/8" and 1 3/4" primaries to accomodate both naturally aspirated and supercharged applications. American Racing Headers also produces an incredible axle-back exhaust system for the Mustang. The Thunder Muffler system is loud, deep, and powerful in tone and will improve your Mustang's exhaust tone and volume, as well as HP and Torque numbers across the entire RPM Range. This axle-back system is designed specifically for use with the American Racing Long Tube Headers system. System is manufactured from the same high quality stainless steel as the American Racing Headers and features high-polished double rolled stainless steel exhaust tips. **Note: The systems with 3" X-Pipes are only intended for use on High Boost and extremely modified Mustangs** Please select your desired system and application from the drop-down menu below.
  • Shelby GT500 American Racing Headers

    Shelby GT500 American Racing Headers

    $1,565.00
    Free Shipping
    Complete Performance Long Tube Headers Package for the 2007 and newer Ford Mustang Shelby GT500 Arguably the most amazing hot rod to ever exit a Ford factory, the Shelby GT500 is here. With a mountain of horsepower just waiting to be unleashed, American Racing Headers’ bolt in long tube header systems can increase power and torque by as much as 40RWHP and 40RWTQ. Like all American Racing Headers’ systems, construction is all 304 S/S, flanges are 3/8" laser cut and collectors are merge style and incorporate scavenger spikes. X-pipes include 200 cell high flow metallic cats or can be ordered without cats. 1-3/4" primaries come standard. For high boost race applications, special order headers with 1-7/8" or 2" primaries are available as well. The installation of an aftermarket header system alters the manner in which your engine runs so drastically, and changes performance so much that a custom tune is required with each installation. Please note that 1 7/8" and 2" header systems are only necessary for high-boost and highly modified applications, and will not run properly with a Mustang that is closer to stock. Please select your desired system from the drop-down menus below.
  • 1999-04 Mustang American Racing Headers

    1999-04 Mustang American Racing Headers

    $1,494.00
    Free Shipping
    American Racing Headers system for the GT and Cobra Mustangs, Model years 1999-2004 This American Racing Headers' long-tube system is crafted with the same great attention to detail and quality that all ARH systems are. Crafted for both the 2-Valve and 4-Valve Mustangs, this gives owners of those vehicles something to rejoice over. If you want improvements in the sound, performance, look, finish, and durability of your car, this upgrade can provide all of those! Laden with exceptional features, there's no better bang for your performance buck out there. Manufactured entirely using the highest quality 304 Stainless Steel 100% leak free single piece long tube design Merge collectors with scavenger spikes for superior flow 3/8" thick flanges with hand ported inlets, all of which is tig welded for the highest strength and quality Excellent fit and easily installed from underneath the vehicle Wide positioning in the engine compartment for easy Trans access still Oustanding gains in both Horsepower and Torque across the entire RPM range Choices of 3/4" and 7/8" primaries with 2 1/2" and 3" collector options Choice of direct bolt-in catted system as well off-road cat-less X-pipe options Ultra high flow 200 cell metallic substrate cats It doesn't get any better than this for your performance Mustang! **Please note when selecting your system that those with the systems with 3" X-Pipes are for High Boost Apps only**  Please select your vehicle and application specific system from the Drop-Down Menu below.
  • Mustang GT 5.0L American Racing Headers

    Mustang GT 5.0L American Racing Headers

    $1,565.00
    Free Shipping
    Complete Header Systems for the 5.0L 2011+ Mustang GT by American Racing Ford claims 412 HP on their new Mustang GT, but we say it’s considerably more! The new 5.0L Coyote Mustang is here and quicker than you can blink, and ARH has a header system for this pony car monster. 100% U.S. made using the finest 304 stainless steel components, this system fits great, installs relatively easily and produces HP gains normally only seen in much bigger V8’s. Through stock mufflers and mid pipes (and no tuning) power was up 32 RWHP. We were blown away, and you will be also! Additional features include: 3/8” thick flanges, merge collectors with scavenger spikes, 200 cell metallic substrate cats, a direct fit X or H pipe and your choice of  1-3/4” or 1-7/8” primaries. This system comes with all necessary installation hardware, so that at this price you're receiving all necessary equipment, no tricky pricing or bait and switches that you'll see at other companies. Includes all necessary gaskets, bolts, and harnesses.   Available Header Systems: Header 1 3/4" x 3" and 3" X Pipe W/Cats - MST-CY34WC Header 1 3/4" x 3" and 3" X Pipe No/Cats - MST-CY34NC Header 1 7/8" x 3" and 3" X Pipe W/Cats - MST-CY78WC Header 1 7/8" x 3" and 3" X Pipe No/Cats - MST-CY78NC

5 Item(s)

Grid List

Set Descending Direction