Call Us: 888-631-1433
COUPON CODES     SCP5: $5 OFF ORDERS OVER $125    SCP25: $25 OFF ORDERS OVER $275   SCP50 $50 OFF ORDERS OVER $550
Painted Parts are painted to order and take additional time, right now we are about a 4-5 week lead time. Please keep this in mind.

        C5 C6 Corvette PCV Oil Catch Can

        C6 Corvette PCV Oil Catch Can for the C5 and C6 and Z06

        Purpose of your Stock C6 Corvette PCV System:
        The PCV (Positive Crankcase Ventilation) system is designed to regulate and remove fumes from the engine crankcase, and to alleviate crankcase pressure which could cause oil leaks or seal damage. The PCV system routes crankcase fumes into the intake manifold where they can be burned to eliminate harmful emissions into the atmosphere. The PCV valve controls the amount of crankcase flow volume depending on the engine's load.  With large throttle openings (high engine loads), the more blow-by gases are produced, and the more the PCV system flows oil vapor into the intake manifold. The PCV valve also functions as a check valve to prevent intake manifold flow from reversing back into the crankcase when there is a backfire, or during periods of high manifold pressure (boost) during forced induction by turbocharger or supercharger.
        C6 Corvette oil catch can
        Negative Effects of your Stock PCV System:
        Many C6 Corvette, Camaro, Firebird and GTO owners with LSX engines can testify to the amount of oil residue that can accumulate inside the intake manifold, throttle body, intake track and even the air filter during aggressive driving conditions.

        C6 Corvette  oil catch can
        There are various negative effects when excess oil vapor contaminates the intake
        system from the stock PCV system - such as:

        *Throttle body and/or MAFS (Mass Air Flow Sensor) malfunction or failure.
              
        *Air filter, intercooler (if equipped) and intake ducting contamination if oil pools and run back out the intake system after engine shutdown.
              
        *Reduced octane of the air/fuel mixture, which can cause detonation and the ECM (Engine Control Module) to retard timing, thereby reducing engine power.
         
        *Excessive carbon build-up on valves, piston crowns, combustion chambers and spark plugs. This also increases the chance of detonation and power loss.

        *Increased emissions & possible contamination of catalytic converters and oxygen sensors.

        Bottom line: Excessive amounts of oil vapor in the intake manifold is detrimental to your engine!

        Solution: Install the Southern Car Parts PCV Oil Catch Can!

        Oil Catch Can

        Ultimate Function:
        The Southern Car Parts PCV Oil Catch Can is designed to effectively separate oil from the crankcase vapors, thereby eliminating all negative effects of excessive intake system oil contamination.  Our Catch Can has been engineered to remove the oil vapor before it has a chance to contaminate your intake system.

        C6 Corvette Oil Catch Can

        Not all Catch Cans are created equally!  Often Imitated, never duplicated.  Most Catch Cans on the market are just comprised of an empty container with 2 ports.  While that simple design may trap a few oil droplets, our Catch Can is designed to condense the oil vapor and trap the oil inside the container.

        Elite PCV Oil Catch Can

        Our test proven design incorporates a stainless steel mesh and screening mechanism that acts like a maze to collect and condense the oil vapor.  Once the oil vapors condense into liquid droplets, it falls to the bottom of the can.  In addition, the top assembly is specially designed to keep any liquid from climbing out the exit hole during aggressive driving conditions.  Stored oil volume is approximately 8 ounces.  You will be amazed by how much oil our Catch Can will catch!  Don't settle for an inferior competitor's product.  Insist on Elite Engineering's Catch Can!
         
        Premium Construction:
        The Southern Car Parts PCV Oil Catch Can is constructed of the finest materials inside and out.  High-performance car owners insist on the best products that offer unsurpassed function as well as impressive visual enhancement.  Our Catch Can do both!  Our exclusive design incorporates optimum function and the finest materials, construction and finishes for maximum dependability.

        LS Engine Oil Catch Can

        The 2.6" diameter by 6.0" long body is machined from billet 6061-T6 aluminum alloy, and then anodized in a variety of colors for a striking look.  The internal condensing screen is stainless steel encased inside an aluminum alloy housing designed for low flow restriction.  The housing can be disassembled for screen inspection, cleaning or replacement if needed.  The inlet and outlet hose fittings are brass, and threaded into the body and sealed with Teflon tape.  Supplied hoses are fuel and oil vapor compatible (SAE 30R7 rated).  The bottom catch can reservoir screws onto the top of the unit and is sealed with a built-in O-ring.  Inspection and cleaning is easy by simply removing the bottom of the unit without disturbing the mounting system or hoses.

        In keeping with our high quality standards, all supplied mounting hardware and screws are stainless steel.  The supplied custom machined mounting bracket is black anodized 6061-T6 aluminum, and is attached to the passenger side engine head on LS1/LS6/LS7/ applications with (2) two 10 mm button head screws.

        High Performance Oil Catch Can

        Each Catch Can kit includes everything you need to install the system. Basic mechanical skills and common hand tools are the only things required.

        Kit Includes:

        C6 Corvette catch can
            *Catch Can assembly beautifully anodized in your choice of available colors, complete with 3/8" barbed inlet/outlet hose fittings.
              
            *Custom machined mounting bracket for LS1/LS6/LS7/ applications, black anodized.
              
            *Stainless steel mounting hardware.
              
            *24 inches of 3/8" ID fuel and oil vapor compatible hose.
              
            *PCV adaptor hardware.
              
            *Black zinc plated hose clamps.

        Detailed Installation Instructions located here

         

        Application: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette

        Application: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 C5 Corvette

        0.0
        Elite Engineering
        • $199.00

        OR
          • SKU
            705-001
          • Weight
            1 lbs
        • Manufacturer
          Elite Engineering
        • Configurator Products
          No
        • Configurator Status
          No
        • Covercraft Status
          No
        • Disable loading on additional products
          No
        • Disallow Use of Coupons
          No
        • MPN
          705-001
        • Part Number_333224
          705-001
        • Select Featured
          No
        • Model
          C5, C6 Z06, C6
        • Color
          Polished Chrome, Silver 508, Black, Blue 531, Red 503
        Customer reviews
        Please sign in to add review
        There are no comments yet. Be the first to leave a comment

        We accept the following payment methods:

        Accepted payment methods

        Shipping

        We utilize UPS, Fedex, and USPS for all of our shipping needs. Carrier choice is based upon availability and needs of the customer and is the sole discretion of SouthernCarParts. We always try to ship within 24 hours of order placement (do to the custom nature of some products, shipping within 24 hours is impossible, actual shipping time frames will be listed in the product description). Please keep in mind that some products such as Custom Fit Car Covers, Lloyds Floor Mats, Painted accessories, and Racemesh Products can take 3 -10 days to ship and are charged at time of order placement. Racemesh products take 4 weeks to ship as they are made to order.

        Returns


        Should you need to return a part for refund, exchange, or credit, please contact our returns department within 30 days of purchase at orders@southerncarparts.com for a Return Merchandise Authorization (RMA) number. Most problems, such as installation, can be solved with a telephone call (888-631-1433). Southern Car Parts will not accept returned goods without prior authorization and an RMA# written clearly on the exterior of the box. The customer is responsible for freight on all return orders. Parts authorized to be returned, on a non-exchange basis, are subject to a 20% restocking fee. Returns will only be accepted within 30 days of the original date of shipment.  Custom painted parts - Once these parts are started, we can refund you less the paint(chemicals) that have been used. Exception is rear spoilers and front splitters, we can refund less 20%.

        Custom-made-to-order items are NOT returnable. This includes embroidered floor mats and car covers.
        Damages in Shipping

        All damages from shipping must be reported to Southern Car Parts within two business days from tracking number delivery confirmation. After two business days, damages become the responsibility of the customer.