Challenger Cold Air Intake


Challenger Cold Air Intake

2009-2017 Dodge Challenger Cold Air Intakes

Cold Air Intake and Forced Induction Systems for the Dodge Challenger

If you are looking to add some horsepower gains to your new Dodge Challenger, the intake is the first place to look for a quick boost in power. Defined as "Bolt on Horsepower", replacing your intake with a high flow cold air intake will usually get you 7-12 hp instantly without a tune or any other changes, and can provide even more power and performance when coupled with other performance parts. Intakes help your Challenger run more smoothly and efficiently, and at the price point you'll find them at, are the de facto bargain modification piece for your Dodge Challenger.

13 Item(s)

Grid List

Set Descending Direction
  • 2005-2010 Challenger and Charger 5.7 6.1 V8 Cold Air Inductions Intake

    2005-2010 Challenger and Charger 5.7 6.1 V8 Cold Air Inductions Intake

    $385.65
    Free Shipping
    Get more out of your Challenger or Charger with this Cold Air Inductions cold air intake. One of the only true cold air intakes available. Most competitors use a tube that is not blocked off from the rest of the engine, this means you are pulling in hot air.The LX series of cars brought performance back to the mainstream Dodge and Chrysler cars, and Cold Air Inductions brings even more performance! Our cold-air intake system fits both the 5.7L and 6.1L versions of the Hemi V8, and adds up to 18 rear-wheel horsepower with an average increase of 16 horsepower.Intake System Includes:Insulated Aluminum Air Box, Air Box Lid with Clear Inspection Window, 4.0-inch (102 mm) Thermal-Coated Intake Tube, High-Performance Air Filter (CF-8400), Black Silicone Coupler / Stainless Clamps, Installation InstructionsNOTES: This is a direct replacement for the OEM air box. No modifications required. Retains the OEM washer bottle in the stock location. Not for sale or use in CaliforniaApplication: 2005, 2006, 2007, 2008, 2009, 2010 Challenger and Charger V8
  • Dodge Challenger SRT8 Edelbrock E-Force Supercharger

    Dodge Challenger SRT8 Edelbrock E-Force Supercharger

    $7,084.80
    Free Shipping
    Edelbrock E-Force 1536 Supercharger for the 2005-10 6.1L HEMI Dodge Challenger SRT-8 Does your HEMI equipped Challenger need more power? Then get an Edelbrock E-Force Supercharger system - the most efficient supercharger on the market for the popular 6.1L HEMI engine. These complete supercharger systems provide maximum flow, minimum temperature rise, quiet operation and reliability only the Edelbrock name can guarantee. They feature minimum air restriction in and out of the supercharger for optimal flow. They also include individual 7" long intake runners that allow for maximum low end torque and great drivability. These systems are available with an optional supplemental warranty, 3 years or 36,000 miles and 5 years or 60,000 miles to give you peace of mind when installing our supercharger system on your brand new vehicle. The true brilliance of the Edelbrock E-Force supercharger is in the efficient, low-profile design. Edelbrock went to their design team with a singular goal in the development of the E-Force systems: get as much HP and Torque gains as possible out of a system that will fit underneath the stock hood. This low-clearance build equates to great savings to the consumer who desires to put forced induction on their vehicle as it saves them the cost of a new, aftermarket supercharger hood on top of their new supercharger. This low-profile design also allows for the design and building of the most complete sleeper Dodge Challenger out there. Keep your vehicle looking stock, but performing better than all the others on the road with an Edelbrock E-Force Supercharger. Entire kit includes: Supercharger Manifold Assembly (Featuring Eaton TVS Rotors) New BHJ Crank damper (SFI certified) Cast Aluminum Alternator/Idler Bracket Heavy Duty Automatic Belt Tensioner Large 92 Sq-in Intercooler Full Face, Low Temp. Heat Exchanger for Intercooler System Goodyear Gatorback Serpentine Belt (Optional) Secondary 6-rib Supercharger Belt Drive with 7.50" Crank Pulley Electric Intercooler Water Pump Intercooler Recovery Tank Custom Molded Intercooler Hoses Extruded Aluminum Fuel Rails with -6 AN lines Fuel Injectors (52lb/hr) (Optional) Supercharger Pulley (Optional) Steel Idler Pulleys With Heavy Duty High Speed Bearings High Flow Air Intake Tube & Filter Edelbrock Aluminum Engine Covers (Optional) Plug & Play, Electrical Harness & Installation Hardware Handheld Calibration Module, Preloaded with ALL Tunes (Optional) A Preloaded, handheld calibration tuner is available with this supercharger. The price above reflects the complete system with tuner. If you do not want the tuner--or other kit components listed as Optional--or already own your own, please select the corresponding option from the drop-down menu below and you will see your final price adjusted accordingly.
  • 2009-2010 Dodge Challenger 3.5L Cold Air Intake

    2009-2010 Dodge Challenger 3.5L Cold Air Intake

    $329.99
    A sister product to the K&N 57 Series FIPK, K&N 63 Series Intake Kits or AirCharger Intakes are built for many different vehicles and represent a dramatic improvement over a K&N O/E replacement filter alone. These intakes use only non-metallic rotationally molded tubes that can reduce intake air temperature and decrease intake sound over a metal tube. Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K&N Air Filter. The weakest link in the airflow "chain" robs a vehicle of its natural horsepower. Often that weak point is the factory air path leading to the Engine. K&N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine. The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. 63 Series Intake Kits are not legal for street use in some U.S. states.63-1117 Product Specifications:Product Style: 63 Series Aircharger KitsEstimated Horsepower Gain: 11.68 HP @ 6215 RPMReplacement Filter: RF-1048CARB Exempt: NoWeight: 9.7 lb (4.4 kg)Product Box Length: 20.25 in (514 mm)Product Box Width: 12.25 in (311 mm)Product Box Height: 12.25 in (311 mm)2009 CHRYSLER 300 3.5L V6 F/I - All CARB Exempt: No2008 CHRYSLER 300 3.5L V6 F/I - All CARB Exempt: No
  • 2008-2010 Dodge Challenger K&N Replacement Filter

    2008-2010 Dodge Challenger K&N Replacement Filter

    $47.99
    Replacement Air Filter by K&N for the 2008 and newer Dodge Challenger K&N’s replacement air filters are designed to increase horsepower and acceleration while providing excellent filtration. We make over 1,200 different replacement air filters for virtually every vehicle on the road. These filters are washable and reusable and are custom designed to fit into your existing factory air box. Their drop-in design means adding performance is simple. With most vehicles you simply remove the disposable air filter and replace it with a K&N. See applicable instruction sheet for details. Our stock replacement air filters for street vehicles are covered by our famous K&N Million-Mile Limited Warranty and will be THE LAST AIR FILTER YOUR VEHICLE WILL EVER NEED. Will fit the following vehicles: 2008-2010 DODGE CHALLENGER 6.1L V8 F/I - All 2008-2010 DODGE CHALLENGER 5.7L V8 F/I - All 2008-2010 DODGE CHALLENGER 3.5L V6 F/I - All
  • 2011-2017 Dodge Challenger Airaid V6 Intake System

    2011-2017 Dodge Challenger Airaid V6 Intake System

    $242.31
    Free Shipping
    Airaid Cold Air Intake System for the Dodge Challenger V6 AIRAID Intake Systems are computer designed to give your Challengers engine maximum air flow, which means more horsepower, torque and improved performance. Every AIRAID intake system is dyno tested and tuned to provide maximum performance and efficiency for the Dodge Challenger. By utilizing computer-aided design, AIRAID Intake Systems offer unmatched fit, finish and lifetime warranty. Each AIRAID intake provides superior air filtration, since it comes with an AIRAID Premium Filter featuring our exclusive filter technology. AIRAID Premium Filters are constructed using the finest materials available today. All of our Dodge CHallenger AIRAID Premium Filters utilize a hand-poured urethane body that won’t crack, curl or shrink like other rubber or plastisol units used by our competitors. Filtration performance is second to none, and at No Extra Cost, thanks to the combination of our proprietary material and multiple cotton gauze layers. All AIRAID Premium Filters are 100% washable, reusable and feature our Lifetime “No-Hassle” Warranty.
  • Dodge Challenger Airaid 6.4L 392 SRT8 Intake System

    Dodge Challenger Airaid 6.4L 392 SRT8 Intake System

    $242.31
    Cold Air Intake For the 2011 and Newer Dodge Challenger SRT8 and RT AIRAID Intake Systems are computer designed to give your Challengers engine maximum air flow, which means more horsepower, torque and improved performance. Every AIRAID intake system is dyno tested and tuned to provide maximum performance and efficiency for the Dodge Challenger. By utilizing computer-aided design, AIRAID Intake Systems offer unmatched fit, finish and lifetime warranty. Each AIRAID intake provides superior air filtration, since it comes with an AIRAID Premium Filter featuring our exclusive filter technology. This system is specially designed for optimal performance with the incredible and new Challenger 392 HEMI engine. An engine with as much power and throat as the 392 requires an intake that's given proper R&D to work just for it, and that's what this Airaid system is. The larger filter provides a greater surface area for air intake, and the shroud provides protection from the hot air in the rest of the engine bay. Installation of this intake results in standard performance gains of +11HP and 20+lb./ft. torque at peak RPMs, and performance gains across the entire RPM range. AIRAID Premium Filters are constructed using the finest materials available today. All of our Dodge CHallenger AIRAID Premium Filters utilize a hand-poured urethane body that won’t crack, curl or shrink like other rubber or plastisol units used by our competitors. Filtration performance is second to none, and at No Extra Cost, thanks to the combination of our proprietary material and multiple cotton gauze layers. All AIRAID Premium Filters are 100% washable, reusable and feature our Lifetime “No-Hassle” Warranty. This AIRAID system is also available with the new, incredibly designed Synthamax non-oiled filter. This filter bucks the standard trend of oil-based filters that require regular oiling as a part of their maintenance, and is as easy as an air intake filter can be. When it's dirty simply blow it off with compressed air it's as good as new. The Synthamax technology used in this filter is incredible, and only Airaid offers it! System installs quickly and easily with basic hand tools. Entire installation time is under 1 hour!
  • 2011-2017 Dodge Challenger 5.7L/6.1L Cold Air Intake

    2011-2017 Dodge Challenger 5.7L/6.1L Cold Air Intake

    $267.99
    A sister product to the K&N 57 Series FIPK, K&N 63 Series Intake Kits or AirCharger Intakes are built for many different vehicles and represent a dramatic improvement over a K&N O/E replacement filter alone. These intakes use only non-metallic rotationally molded tubes that can reduce intake air temperature and decrease intake sound over a metal tube. Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K&N Air Filter. The weakest link in the airflow "chain" robs a vehicle of its natural horsepower. Often that weak point is the factory air path leading to the Engine. K&N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine. The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. 63 Series Intake Kits are not legal for street use in some U.S. states.63-1114 Product Specifications:Product Style: 63 Series Aircharger KitsEstimated Horsepower Gain: 21.09 HP @ 5216 RPMReplacement Filter: RF-1042CARB Exempt: NoWeight: 10.4 lb (4.7 kg)Product Box Length: 18.25 in (464 mm)Product Box Width: 18.25 in (464 mm)Product Box Height: 12.5 in (318 mm) 2009 DODGE CHARGER 6.1L V8 F/I - All CARB Exempt: No 2009 DODGE CHARGER 5.7L V8 F/I - All CARB Exempt: No 2008 DODGE CHARGER 6.1L V8 F/I - All CARB Exempt: No 2008 DODGE CHARGER 5.7L V8 F/I - All CARB Exempt: No  
  • 2015-2018 Dodge Challenger aFe Dynamic Air Scoop 54-72203-S

    2015-2018 Dodge Challenger aFe Dynamic Air Scoop 54-72203-S

    $39.00
    High-performance Dodge cars have always had a hood scoope to feed the engine cool outside air for maximum performance. Just because the era of Ramcharger hoods is over does not mean that you can not give your Dodge an edge by giving it a shot of fresh cool air. This air scoop takes advantage of the Challengers factory "Air Catcher" headlight inlet by guiding cool ambient air from outside the vehicle directly into your intake system. The cool dense air allows for your vehicle to run more efficiently, increasing performance. Inspired by the 2015 Challenger SRT Hellcat, this Dynamic Air Scoop works with both factory and aFe Momentum GT intake systems. This part easily snaps into the air box and requires no modification to your vehicle.   Features: • Guides cool ambient air picked up from the factory headlight air inlet hole into your intake system for maximum performance• Inspired by the 2015-2017 Challenger SRT "Hellcat" air inlet duct design• Works with both factory and aFe Momentum GT intake systems  • Constructed of cross-linked polyethylene• Quickly snaps into air box for a hassle-free installation• Perfect addition to aFe Momentum GT intakes (P/N: 51/54-72201; 51/54-72202 and51/54-72203)• No Cutting or Drilling on OEM Parts• Will only work with 2015-2016 Dodge Challenger vehicles Application:  2015, 2016, 2017, 2018 Dodge Challenger V6, HEMI
  • 2008-2017 Dodge Challenger Throttle Body Spacer

    2008-2017 Dodge Challenger Throttle Body Spacer

    $133.83
    For use with 5.7L Hemi & 6.1L Hemi engines only. The PowerAid was developed to enhance your Challengers off idle to mid range performance and efficiency. The unique “Helix Bore” design of the PowerAid creates a spinning action of the incoming air. As air passes through your throttle body, this helical effect causes the air molecules to organize and maintain high velocity. The organization and high velocity of the air is extremely beneficial because it helps to provide a superior atomized mixture of fuel and air all the way into the combustion chamber. The benefits you will see are tremendous torque gains between 800 to 2500 RPM, and potential increases in your fuel economy, depending on driving conditions. Our PowerAid Throttle Body Spacers are manufactured from the highest quality Aircraft Grade Billet 6061-T6 Aluminum. Each PowerAid is specifically designed for your application. Our kits always include the necessary gaskets, hardware, and precision brackets to maintain proper geometry with the factory components. The PowerAid Spacer can be installed in less than an hour using common hand tools with no drilling or cutting required. While providing you with unbelievable performance, you can feel assured that you have purchased the highest quality performance product. We are proud to have all our products made in the USA, with genuine American parts. We will always stand behind our products 110%. All of the PowerAid products carry our Lifetime “No Hassle” Warranty! Increase the horsepower and low-end torque of your Dodge Challenger while increasing your fuel efficiency. The PowerAid spacer is legal in all 50 states, will not void your new car warranty, and can be used with any grade of fuel. Note, please select your engine and vehicle year from the drop-down menu below. All 5.7L Challenger R/Ts use the same Throttle Body Spacer (350-532), but the 6.1L Challenger SRT-8 from 2010 uses a different sized (350-635) Throttle Body Spacer. Installation takes 30 mins.
  • AFE 31-0220 aFe POWER Magnum FLOW Pro DRY S Air Filter

    AFE31-0220 aFe POWER Magnum FLOW Pro DRY S Air Filter

    $69.00
    Who does not want to give their car a performance edge? One of the quickest and easiest ways to add power to your car is by making it easier for your engine to breathe. aFe makes a great performing air filter that will not break the bank.     Constructed with 100% polyurethane on all sides, this high flow OE replacement performance filter will outflow the stock paper filter for improved horsepower and torque. Multiple layers of progressively finer mesh gauze media will provide maximum convenience and easy maintenance.   Washable and reusable for multiple cleaning cycles, the tall open evenly spaced pleats provide excellent dust holding capacity for longer service cycle between cleanings. Integrated urethane bump seal ensures a tight, leak-free seal over the life of the filter.   *Pro DRY S* * Primary Concern: Convenience - Pro Dry S oil-free, dry synthetic filtration media is the world's easiest-to-service performance air filter media * Filtration Efficiency: Better - 99.2% - Pro Dry S oil-free, dry synthetic media combines excellent filtration efficiency with easy-to-clean convenience * Typical Vehicle: Gas / Diesel - With excellent filtration efficiency and high airflow values, Pro DRY S is the perfect choice for any vehicle type * Driving Conditions: Street/Dusty - Pro Dry S will provide extended filter life in normal, everyday driving conditions; in dry, dusty conditions Pro Dry S is an excellent choice for ease of maintenance     Application:  2011, 2012, 2013 Dodge Challenger,Charger
  • 2008-2010 Dodge Challenger Airaid Intake System

    2008-2010 Dodge Challenger Airaid Intake System

    $369.19
    Free Shipping
    Cold Air Intake For the Dodge Challenger SRT8 and RT AIRAID Intake Systems are computer designed to give your Challengers engine maximum air flow, which means more horsepower, torque and improved performance. Every AIRAID intake system is dyno tested and tuned to provide maximum performance and efficiency for the Dodge Challenger. By utilizing computer-aided design, AIRAID Intake Systems offer unmatched fit, finish and lifetime warranty. Each AIRAID intake provides superior air filtration, since it comes with an AIRAID Premium Filter featuring our exclusive filter technology. AIRAID Premium Filters are constructed using the finest materials available today. All of our Dodge CHallenger AIRAID Premium Filters utilize a hand-poured urethane body that won’t crack, curl or shrink like other rubber or plastisol units used by our competitors. Filtration performance is second to none, and at No Extra Cost, thanks to the combination of our proprietary material and multiple cotton gauze layers. All AIRAID Premium Filters are 100% washable, reusable and feature our Lifetime “No-Hassle” Warranty.
  • 2008-2010 Dodge Challenger 5.7L and 6.1L Roto-Fab Cold Air Intake

    2008-2010 Dodge Challenger 5.7L and 6.1L Roto-Fab Cold Air Intake

    $364.95
    Free Shipping
    Conplete Roto-Fab Cold Air Intake Kit for the 5.7L and 6.1L Hemi powered Dodge Challenger RT and SRT8 Are you tired of a tube and a filter being referred to as a "Cold air intake"? If so, you'll like our approach to designing and building air intakes. We start by designing the air box that really fits your car. It's much more than the typical "L" shape piece of sheetmetal you are used to seeing. Our box is designed to contour the surrounding components. This enables us to have a very large box and filter while maintaining a barrier between the filter and harmful engine and radiator heat. The bottom of our air box is formed and cut for coupling to the stock air inlet hole. (see the pic of the installed air box with the filter removed) Additionally, we have a triangular inlet on the outboard side of the air box. Because of the location, it draws cooler air from the same area as the bottom opening. The result is a larger volume of cooler air when you need it. Black anodized aluminum brackets mount to existing locations on your vehicle. No modifications are required for installation. Our custom molded air box coupler attaches to the air box with 6 stainless steel 10-32 screws. On the inside of the box, it has a large 6" mounting flange to accept the huge air filter. The larger opening ensures you won't be starving your motor during acceleration. As the coupler passes through the air box wall, it transitions to 5" OD to accept our high gloss black silicone hump hose. The hump hose takes up the movement of the air tube. This design allows us to mount the airbox assembly solidly to maintain a good seal between our intake components while still having the ability to absorb motor rock. Most intakes simply cut an oversize hole for this. The other end of the hump hose accepts our custom molded air inlet tube which has a huge 5" OD inlet. The tube transitions down through its length allowing the air to gain velocity as it travels towards the throttle body. At the throttle body, we use a high gloss silicone hose that mounts our tube solidly so good alignment is maintained, even during motor rock. From start to finish, we have designed and built this cold air intake system for the Dodge Challenger with all of the qualities to make it work at peak performance! Please compare our design and components to the competion and you'll see the differences. Dyno results have been very good with our intake. With a 5.7L Challenger RT motor, we picked up nearly 14 HP with gains in torque over most of the curve, and there's even more to be had for a 6.1L equipped Challenger SRT8. More importantly, when you install this air intake, you will feel the difference! One of our first units went on a car already equipped with a "tube and filter" air intake. The owner was pleasantly surprised at the gains of our intake as compared to the competition. Another prototype went on a stock 300C. The feedback was the same-noticable acceleration gains and an awesome sound. Several leading companies offer a metal wall with this same open area for clearance of hoses and wiring harnesses in this region. This happens to be the easiest route for your air filter to draw air. The air goes straight through the radiator, gets extremely hot, and then straight into your air filter! It's a seriously flawed design. Keep in mind, when the hood is open during chassis dyno testing, the filter can easily draw air from the top side, so you don't see this problem show up on the dyno, but your hood is closed when you're driving down the road! As you can see from our air box pics, our box is molded to clear all of the components and maintain a seal to your stock air inlet on the chassis. This is just one more area where we've spent the time and effort to make our intake superior to the competition. Please keep in mind that this air intake system is for 2005-2010 SRT8 and 5.7L RT Dodge Challenger models.
  • 2009-2010 Dodge Challenger R/T Edelbrock Supercharger 1530 /1532

    2009-2010 Dodge Challenger R/T Edelbrock Supercharger 1530 /1532

    $7,980.52
    Free Shipping
    Edelbrock 1530 and Edelbrock 1532 for Dodge Challenger R/T Supercharger Kit; E-Force; For Use With Chrysler 5.7L Hemi; Roots Style; Multi-Port Injection; Stock Length Nose; Black; With Supercharger Manifold Assembly/ BHJ Crank Damper/ Cast Aluminum Idler Bracket/ Heavy Duty Automatic Belt Tensioner/ Large 92 Square Inch Intercooler/ Intercooler Hoses/ Intercooler Water Pump/ Intercooler Recovery Tank/ Fuel Rails/ Belt/ Idler Pulleys/ Air Filter/ Intake Tube/ Electrical Harness/ Fuel Injectors/ Engine Covers/ Handheld Calibration Module Preloaded With All Tunes.   The true brilliance of the Edelbrock E-Force supercharger is in the efficient, low-profile design. Edelbrock went to their design team with a singular goal in the development of the E-Force systems: get as much HP and Torque gains as possible out of a system that will fit underneath the stock hood. This low-clearance build equates to great savings to the consumer who desires to put forced induction on their vehicle as it saves them the cost of a new, aftermarket supercharger hood on top of their new supercharger. This low-profile design also allows for the design and building of the most complete sleeper Dodge Challenger out there. Keep your vehicle looking stock, but performing better than all the others on the road with an Edelbrock E-Force Supercharger.   A Preloaded, handheld calibration tuner is available with this supercharger. The price above reflects the complete system with tuner. If you do not want the tuner--or other kit components listed as Optional--or already own your own, please select the corresponding option from the drop-down menu below and you will see your final price adjusted accordingly.

13 Item(s)

Grid List

Set Descending Direction

Southern Car Parts has all of the greatest Challenger Cold Air intakes available, Airaid, R2C, aFe Momentum, K&N Filters, Roto-Fab and more.

Dodge Challenger Cold Air Intake

At Southern Car Parts, we have a large collection of aftermarket goods like modifiers, replacements and accessories etc. for Challenger and many other cars like Mustangs, Camaros, and Raptors etc. We are a leading online store and we keep improving our products every now and then. We add goods with latest upgrades and update our inventory often, introducing options to different categories every week, so make it a habit to check back often to stay at pace with our latest products. Despite the huge bevy, we only carry 100% authentic products, only from top-notch manufacturers to ensure that only the finest quality products are served to our customers. All these products are also priced at reasonable prices after keeping all the budget standards in mind.

We are always at your service to satisfy all your needs related to aftermarket goods. We have a huge collection of both interior and exterior parts for your Challenger. We have almost everything to add to the beauty and performance of this muscle giant. This stylish yet powerful car has never let us down and has passed all our performance tests. It is No.1 in terms of built, durability and performance, which makes it one of our favorites. This moved us to create something good enough to match the performance of this modern yet classic muscle car and add to its performance. Our complete collection of aftermarket goods is created in a way that it sustains the high demands of a Challenger owner. Our well-engineered range of cold air intakes and other forced induction systems not just adds to the power of this muscle beast but also keeps it above other muscle cars in the crowd.

We will be glad to assist you even if you have just one query or ten. Consider adding to the horsepower of your car, the idea itself is thrilling and so will be the driving experience. Or if you're looking for a filtration kit, you can pick up an SRT Airaid unit, K&N replacement filter to keep your Dodge Challenger fully high on performance. Check out our cold air intake, roto-fab intake, intake system and supercharger to add a power boost to your car. We offer free shipping on most of our products and many other offers to keep replacement cost light on your pocket. With the latest variety of products to select from, shopping can actually become fun. So think no more and shop for your Challenger requirements and add more horsepower to it today. In case you have any queries, don’t think twice before contacting the cooperative and friendly sales staff at SCP! Browse through our category of cold air intakes here/