Corvette C6 Brake Rotors


Corvette C6 Brake Rotors

Corvette C6 Brake Rotors

Disc brake rotors from Southern Car Parts are just the answer to replace or restore your Corvettes braking system. Whether your looking to upgraded to performance stopping or restore your system to original specifications. Southern Car Parts has the top quality disc brake rotor to get your project performing its best. Southern Car Parts disc brake rotors are sourced only with the Corvette owner in mind to bring you the best you deserve

9 Item(s)

Grid List

Set Descending Direction
  • C6 Corvette  Z06 Brembo GT Monobloc Front Rotors

    C6 Corvette Z06 Brembo GT Monobloc Front Rotors

    $1,068.00
    These are the C6 Corvette Z06 (2006-present Z06 only) Brembo GT Monobloc replacement front rotors. Available in slotted or drilled, they are the exact replacement rotors needed for your C6 Corvette Z06 Brembo Monobloc kit (please note these are not OEM rotors that will NOT fit on the OEM Z06 brakes ). You need to of upgraded your brakes to the Brembo C6 Corvette Z06 Monobloc GT Kit for these rotors to be applicable on your C6 Corvette Z06. Please Read: The 2-piece rotor assemblies in Brembo GT systems are made up of three primary components; disc (outer ring), disc hardware and bell or hat (black aluminum center portion).   Discs and disc hardware are standard wear items. Bells/Hats, however, may be re-used if properly inspected and there are no visible signs of wear. The life of these components will vary based on the vehicle, driver and driving conditions.   Discs should be replaced if any of the following occur: Disc exceeds minimum thickness, causes steering wheel feedback (due to uneven pad transfer) or shows signs of excessive cracking.  The minimum thickness is stamped on the edge of the disc. (See image 3)   Disc hardware must be replaced each time a disc is replaced. If hardware is re-used and out of tolerance, it may dramatically accelerate the wear of both the disc and bell.    Bells should be inspected for wear each time a disc is replaced. The bell can typically be re-used unless there are signs of visible wear. Re-using a bell that is out of tolerance will dramatically accelerate the wear of the disc and the disc hardware.  Worn bells may prevent the hardware from working properly and cause the disc to rattle. Our Brembo C6 Corvette Rotor Kits come complete with all hardware and rotor rings. Does not include the center hat/bell. This is for the front pair of rotors rings (left and right) and is sized as 365mm x 34mm 2 Piece Rotors or 380MM complete with all mounting hardware (without the center bell) for the Brembo GT C6 Corvette Z06 kit. Please ensure your sizing and part number are correct before ordering. These rotors are compatible with Brembo kits C6 Corvette Z06 Brembo GT 1N1.8502A and 1N2.8502A  
  • C6 Corvette  Z06 DBA 4000 Brake Rotors

    C6 Corvette Z06 DBA 4000 Brake Rotors

    Regular Price: $400.00

    Special Price $319.99

    Free Shipping
    The DBA 4000 Series is an excellent mid series street legal brake rotors for your C6 Corvette that is an eccellent upgrade from the OEM Rotors. The DBA 4000 Series Rotors that we offer are an exact match for OEM equipment for the C6 Corvette and can easily be installed without any additional components or modifications to your C6 Corvette. DBA’s 4000-series enhanced performance rotor features Thermal Stability Profiling for improved heat handling. This unique process provides greater thermal stability than standard street discs. TSP enhances the microstructure of the disc rotor for performance applications. Greater thermal stability allows your discs to take more heat, making them more stable under heavy braking for longer.  TSP also means improved brake pad and disc rotor life, and delayed brake fade.    Also unique to DBA Rotors, Thermo-Graphic paint markings are used for effective heat monitoring which change colour at specific temperature thresholds. By monitoring the markings, drivers can check their braking performance quickly and easily. 4000 Series DBA rotors are availabe in slotted or slotted and drilled configurations (XS), The unique 6x6 Wiper Slot is designed to efficiently clear the gases, dust and debris, resulting in a cleaner disc surface for better braking while maintaining maximum friction.  4000 series rotors also incorporate the innovative Kangaroo Paw ventilation design, which runs cooler, stronger and outperforms traditional straight vane disc rotors by up to 20%. Designed for the performance street and motorsport enthusiast. Sold in pairs or a complete set of front and rear, the DBA 4000 Series Rotors are an excellent brake upgrade for your C6 Corvette. For an even higher performance braking package, use the DBA 4000 Series rotors on the rear and DBA 5000 Series for the Front. Slotted only comes with a Black Hat. Slotted and drilled only comes with a Gold Hat.
  • C6 Corvette  Z06 DBA 5000 Brake Rotors

    C6 Corvette Z06 DBA 5000 Brake Rotors

    Regular Price: $799.00

    Special Price $649.00

    Free Shipping
    The DBA 5000 Series are the best brake rotors DBA offers for your C6 Corvette Z06 (2006+). They are the perfect blend of technology and art for a beautiful addition to your C6 Corvette that provides unmatched stopping power. The DBA 5000 Series Rotors that we offer are an exact match for OEM equipment for the C6 Z06 and can easily be installed without any additional components or modifications to your C6 Corvette. DBA does not make 5000 series brake rotors for the rear of the C6 Corvette Z06, DBA reccomends using the 4000 series for the rear You can add the DBA 4000 series C6 Corvette Z06 rotors in the options below. DBA’s high-series enhanced performance rotor features Thermal Stability Profiling for improved heat handling, Thermo-Graphic paint markings for effective heat monitoring and Kangaroo Paw ventilation which runs cooler, stronger and outperforms traditional straight vane disc rotors by up to 20%. The 5000 series rotors are designed for the serious street driver. These 2-piece ultra-high performance rotors feature aerospace grade materials (Alumalite) for added thermal (heat) protection to your vehicle's wheel bearings, by providing greater resistance to distorion as it allows the disc to expand uniformly. The premium cross-drill and slot pattern provides an efficient means of dispering debris and gases while maintaining consistent friction and a cleaner disc rotor. DBA’s 5000 series range of disc brake rotors are the ultimate braking solution for the C6 Corvette enthusiast looking for race quality performance in a product that is easily mistaken for a quality piece of modern art. Every DBA 5000 series disc rotor is manufactured from a combination of the finest quality cast iron, aircraft grade aluminium centres, and aircraft grade mounting hardware. DBA’s intelligent utilisation of two different high grade materials provides a perfectly balanced brake design that can freely expand and contract without warping. Featuring DBA’s patented 144 diamond and tear-drop pillar design ( Kangaroo Paw ) ventilation system the 5000 series cast iron rotor has a precise balance of material on either side of the disc which is not achievable on a standard one piece disc due to the integrated mounting bell.  The integrated mounting bell on only one side of a traditional disc rotor produces two different heating and cooling rates which in turn generates two different amounts of thermal expansion. This differential amount of expansion leads to warped disc rotors and stress. A warped disc rotor generates more pressure on the disc pads and increases wear. DBA was the first brake company to  introduce the heat seasoning process “TSP” and temperature monitoring system across the whole performance (or sport disc) range to ensure optimum warp free performance from the first brake application. DBA’s precisely engineered 6061 T6 aircraft-grade aluminium mounting centres do not retain heat like cast iron. This more efficient heat loss reduces the overall temperature of the disc in heavy braking situations. Lower temperatures also contribute to less disc wear. Quality Aircraft grade stainless steel NAS bolts compliment the union between the disc and mounting centre with maximum strength and safety guaranteed. To ensure maximum performance and safety each 5000 series disc rotor is hand finished and inspected by our team of experts. DBA 5000 series disc rotors are available in slotted “SL/SR” for hard core performance or cross drilled and slotted “XS” for performance with style. The Slotted and Drilled rotors have a gold hat and the slotted rotors have a Black Hat. Sold in pairs 
  • C6 Corvette  DBA 4000 Brake Rotors

    C6 Corvette DBA 4000 Brake Rotors

    $332.00
    Free Shipping
    The DBA 4000 Series is an excellent mid series street legal brake rotors for your C6 Corvette that is an eccellent upgrade from the OEM Rotors. The DBA 4000 Series Rotors that we offer are an exact match for OEM equipment for the C6 Corvette and can easily be installed without any additional components or modifications to your C6 Corvette. DBA’s 4000-series enhanced performance rotor features Thermal Stability Profiling for improved heat handling. This unique process provides greater thermal stability than standard street discs. TSP enhances the microstructure of the disc rotor for performance applications. Greater thermal stability allows your discs to take more heat, making them more stable under heavy braking for longer.  TSP also means improved brake pad and disc rotor life, and delayed brake fade.    Also unique to DBA Rotors, Thermo-Graphic paint markings are used for effective heat monitoring which change colour at specific temperature thresholds. By monitoring the markings, drivers can check their braking performance quickly and easily. 4000 Series DBA rotors are availabe in slotted or slotted and drilled configurations (XS), The unique 6x6 Wiper Slot is designed to efficiently clear the gases, dust and debris, resulting in a cleaner disc surface for better braking while maintaining maximum friction.  4000 series rotors also incorporate the innovative Kangaroo Paw ventilation design, which runs cooler, stronger and outperforms traditional straight vane disc rotors by up to 20%. Designed for the performance street and motorsport enthusiast. Sold in pairs or a complete set of front and rear, the DBA 4000 Series Rotors are an excellent brake upgrade for your C6 Corvette. For an even higher performance braking package, use the DBA 4000 Series rotors on the rear and DBA 5000 Series for the Front. These rotors are for the Base C6. They will not fit the C6 Z06. The Rotors for the C6 Z06 are Here.
  • C6 Corvette  Z51 DBA 5000 Series Front Brake Rotors

    C6 Corvette Z51 DBA 5000 Series Front Brake Rotors

    Regular Price: $990.00

    Special Price $649.99

    Free Shipping
    The DBA 5000 Series are the best brake rotors DBA offers for your C6 Corvette  (2005+ excluding Z06 and Non Z51 C6 Corvettes). They are the perfect blend of technology and art for a beautiful addition to your C6 Corvette that provides unmatched stopping power. The DBA 5000 Series Rotors that we offer are an exact match for OEM equipment for the C6 (2005+ excluding Z06 and Non Z51 C6 Corvettes) and can easily be installed without any additional components or modifications to your C6 Corvette. DBA’s high-series enhanced performance rotor features Thermal Stability Profiling for improved heat handling, Thermo-Graphic paint markings for effective heat monitoring and Kangaroo Paw ventilation which runs cooler, stronger and outperforms traditional straight vane disc rotors by up to 20%. The 5000 series rotors are designed for the serious street driver. These 2-piece ultra-high performance rotors feature aerospace grade materials (Alumalite) for added thermal (heat) protection to your vehicle's wheel bearings, by providing greater resistance to distorion as it allows the disc to expand uniformly. The premium cross-drill and slot pattern provides an efficient means of dispering debris and gases while maintaining consistent friction and a cleaner disc rotor. DBA’s 5000 series range of disc brake rotors are the ultimate braking solution for the C6 Corvette enthusiast looking for race quality performance in a product that is easily mistaken for a quality piece of modern art. Every DBA 5000 series disc rotor is manufactured from a combination of the finest quality cast iron, aircraft grade aluminium centres, and aircraft grade mounting hardware. DBA’s intelligent utilisation of two different high grade materials provides a perfectly balanced brake design that can freely expand and contract without warping. Featuring DBA’s patented 144 diamond and tear-drop pillar design ( Kangaroo Paw ) ventilation system the 5000 series cast iron rotor has a precise balance of material on either side of the disc which is not achievable on a standard one piece disc due to the integrated mounting bell.  The integrated mounting bell on only one side of a traditional disc rotor produces two different heating and cooling rates which in turn generates two different amounts of thermal expansion. This differential amount of expansion leads to warped disc rotors and stress. A warped disc rotor generates more pressure on the disc pads and increases wear. DBA was the first brake company to  introduce the heat seasoning process “TSP” and temperature monitoring system across the whole performance (or sport disc) range to ensure optimum warp free performance from the first brake application. DBA’s precisely engineered 6061 T6 aircraft-grade aluminium mounting centres do not retain heat like cast iron. This more efficient heat loss reduces the overall temperature of the disc in heavy braking situations. Lower temperatures also contribute to less disc wear. Quality Aircraft grade stainless steel NAS bolts compliment the union between the disc and mounting centre with maximum strength and safety guaranteed. To ensure maximum performance and safety each 5000 series disc rotor is hand finished and inspected by our team of experts. DBA 5000 series disc rotors are available in slotted “SL/SR” for hard core performance or cross drilled and slotted “XS” for performance with style. The Slotted and Drilled rotors have a gold hat and the slotted rotors have a Black Hat. Sold in pairs 
  • C6 Corvette  DBA 5000 Series Front Brake Rotors

    C6 Corvette DBA 5000 Series Front Brake Rotors

    Regular Price: $788.00

    Special Price $649.99

    Free Shipping
    The DBA 5000 Series are the best brake rotors DBA offers for your C6 Corvette  (2005+ excluding Z51 and Z06). They are the perfect blend of technology and art for a beautiful addition to your C6 Corvette that provides unmatched stopping power. The DBA 5000 Series Rotors that we offer are an exact match for OEM equipment for the C6 (2005+ excluding Z51 and Z06) and can easily be installed without any additional components or modifications to your C6 Corvette. DBA’s high-series enhanced performance rotor features Thermal Stability Profiling for improved heat handling, Thermo-Graphic paint markings for effective heat monitoring and Kangaroo Paw ventilation which runs cooler, stronger and outperforms traditional straight vane disc rotors by up to 20%. The 5000 series rotors are designed for the serious street driver. These 2-piece ultra-high performance rotors feature aerospace grade materials (Alumalite) for added thermal (heat) protection to your vehicle's wheel bearings, by providing greater resistance to distorion as it allows the disc to expand uniformly. The premium cross-drill and slot pattern provides an efficient means of dispering debris and gases while maintaining consistent friction and a cleaner disc rotor. DBA’s 5000 series range of disc brake rotors are the ultimate braking solution for the C6 Corvette enthusiast looking for race quality performance in a product that is easily mistaken for a quality piece of modern art. Every DBA 5000 series disc rotor is manufactured from a combination of the finest quality cast iron, aircraft grade aluminium centres, and aircraft grade mounting hardware. DBA’s intelligent utilisation of two different high grade materials provides a perfectly balanced brake design that can freely expand and contract without warping. Featuring DBA’s patented 144 diamond and tear-drop pillar design ( Kangaroo Paw ) ventilation system the 5000 series cast iron rotor has a precise balance of material on either side of the disc which is not achievable on a standard one piece disc due to the integrated mounting bell.  The integrated mounting bell on only one side of a traditional disc rotor produces two different heating and cooling rates which in turn generates two different amounts of thermal expansion. This differential amount of expansion leads to warped disc rotors and stress. A warped disc rotor generates more pressure on the disc pads and increases wear. DBA was the first brake company to  introduce the heat seasoning process “TSP” and temperature monitoring system across the whole performance (or sport disc) range to ensure optimum warp free performance from the first brake application. DBA’s precisely engineered 6061 T6 aircraft-grade aluminium mounting centres do not retain heat like cast iron. This more efficient heat loss reduces the overall temperature of the disc in heavy braking situations. Lower temperatures also contribute to less disc wear. Quality Aircraft grade stainless steel NAS bolts compliment the union between the disc and mounting centre with maximum strength and safety guaranteed. To ensure maximum performance and safety each 5000 series disc rotor is hand finished and inspected by our team of experts. DBA 5000 series disc rotors are available in slotted “SL/SR” for hard core performance or cross drilled and slotted “XS” for performance with style. The Slotted and Drilled rotors have a gold hat and the slotted rotors have a Black Hat. Sold in pairs
  • C6 Corvette Brake Rotors Baer Decelarotors

    C6 Corvette Brake Rotors Baer Decelarotors

    $350.51
    Free Shipping
    With the popularity of wheel designs being more “open-faced” than ever before, the improved appearance of the brake system has become increasingly more critical to the finished “look” of the vehicle. With this in mind, Baer has developed “DecelaRotors”, OE direct-replacement rotors featuring the stylish look of cross-drilling, slotting and rust-inhibitive zinc coating. DecelaRotors Feature: Dynamic Visual Impact Superior Bite Equalized Pad Wear Consistent Wet Weather Performance Direct OE Replacement Featuring the same counter-rotational drilling and slotting used in professional racing Designed to eliminate out-gassing while minimizing stress-cracks The Industry’s only 36-month, 36,000-mile Limited Warranty for a cosmetically enhanced rotor   Sold in Pairs or Sets of 2-Front & 2-Rear Rotors
  • C6 Corvette  Baer Eradispeed Rotor Package

    C6 Corvette Baer Eradispeed Rotor Package

    $1,095.51
    Free Shipping
    Track performance begins with driver confidence, and nothing will give a driver greater confidence than an upgraded brake system, performance, and feel. The Eradispeed C6 Corvette Rotors by Baer are 2-Piece rotors that provide incredible braking feel and performance. Each rotor utilizes high silicon content iron casting and combination slotting and drilling to create a powerful, durable brake rotors that fits within the stock system and disperses heat better than the other options out there. C6 Corvette Baer Eradispeed Rotors disperse heat, provide friction and leverage for enhanced braking performance, and will work to bring your C6 Corvette to a stop in record time!   Rotor Upgrades C6 Corvette Baer EradiSpeed rotors feature premium high silicon content iron castings. C6 Corvette Baer EradiSpeed Rotor plates are cast with additional mass to absorb additional heat. Internal curved and directional vanes maximize air flow and cooling. Externally slotting and drilling alleviate friction losses from pad outgassing and a zinc chromate surface finish resists rust. Counter rotational application of slots and holes further resists pad transfer and balance issues associated with patterns which run in the conventional direction of rotation. Each gas relief hole drilled in an EradiSpeed rotor is located directly behind an internal vane and chamfered appropriately. These details coupled with Baer’s material selection virtually eliminate durability concerns commonly associated with drilled rotors for the C6 Corvette. Three levels of EradiSpeed upgrade rotors provide the right performance enhancement levels for your C6 Corvette. C6 Corvette Baer EradiSpeed+ rotors each help save pounds off of stock, further improving track performance. C6 Corvette Baer EradiSpeed+1 and +2 rotors provide enlarged rotor diameters for the C6 Corvette (installed using the included bracket to relocate the factory caliper for proper use) which offer enhanced braking performance through greater leverage. The +1 and +2 styles are almost identical in weight to the stock C6 Corvette rotors, despite the increased size and power. EradiSpeed-Plus 2-piece Original Equipment size direct replacements. EradiSpeed-Plus-TWO 2-piece LARGER than Original Equipment Upgrades Applications are for Original Equipment performance cars equipped with premium brakes from the factory. EradiSpeed +2 Upgrades Archimedes, a Greek mathematician c. 250 BC, was the first to explain the principle of the lever explaining how a large weight could be lifted by a relatively small weight by the use of a rigid lever and a properly positioned fulcrum. The process was called leverage. Archimedes, recognizing the power of leverage was quoted as saying, “Give me a place to stand and with a lever I will move the whole world.” Larger diameter rotors generate more leverage (brake force / torque) in EradiSpeed+2 systems. Please Select your Vehicle and Brake Options from the Drop-Down Menus below. All sizes available will work with the stock wheels and stock calipers (Larger sized rotors will include necessary caliper installation brackets):
  • C6 Corvette  Z51 Brake Rotor Package

    C6 Corvette Z51 Brake Rotor Package

    $776.00
      This is a complete set of the exact same GM cross drilled rotors used in the C6 Z51 package. Our C6 Corvette Brake package is not put together with aftermarket parts, but rather everything is official GM parts and the same exact ones used when you purchase the Z51 package from the factory. The kit includes all 4 rotors and the replacement caliper brackets to accommodate the larger rotors. Everything you need to install the Z51 rotors on a non Z51 C6 Corvette.

9 Item(s)

Grid List

Set Descending Direction
Corvette C6 Brake Rotors

Minimal Price: $ 0.00 0