C7 Corvette Exhaust Systems


C7 Corvette Exhaust Systems

C7 Exhaust System

Do you want the best C7 exhaust system for your 2014, 2015, 2016,2017 and 2018 Corvette? If so, you are going to appreciate the high-end Corvette C7 exhaust system products available from Southern Car Parts.

At Southern Car Parts, we are committed to providing exceptional C7 exhaust systems that will help you take your 2014-2018 Corvette's performance to the next level. Whether you want a loud Borla ATAK exhaust system, a more subtle Billy Boat PRT, or one of a kind Akrapovic exhaust Southern Car Parts has the expertise and selection to find the perfect fit for your Corvette.

1-48 of 49

Page:
  1. 1
  2. 2

Grid List

Set Descending Direction
  • C7 Corvette Borla ATAK Rear Section Exhaust System #11866

    C7 Corvette Borla ATAK Rear Section Exhaust System #11866

    $1,829.99
    Free Shipping
    C7 Corvette BORLA ATAK - The least most of the Borla Corvette Exhaust systems. If you're looking to increase the volume of your C7 Corvette Stingray exhaust, while also improving the exhaust tone and HP and Torque performance across the RPM range, than a Cat-Back exhaust is perfect for you, and there's no exhaust for your monster Chevrolet LS Small-Block V8 better than this new ATAK from Borla. Designed using Borla's Acoustically Tuned Applied Kinetic technology, this ATAK exhaust will provide your Corvette with a powerful and aggressive racing exhaust tone that will truly set it apart. This improved tone and increased volume doesn't come with any sort of compromise either--the ATAK will provide you class-leading performance gains, production quality, and minimal cabin drone! So, again, if you're looking to improve the over-all drivability and enjoyment of your Corvette Z06 or ZR1, look no further than this incredible ATAK Exhaust from Borla!   Part# Product Type Pipe Diameter Tip Size   Tip # Exit 11866 Rear Section Exhaust 2.75' into muffler dual 2.25" out 8.2"x3.66   51 Dual Center Rear Exit   Some C7 Corvette Borla systems use premium quality intregrated valves to ensure compatibility with multi-stage driving modes or fuel-saving cylinder deactivation systems. Borla uses patented computer-controlled technologies that allow them to adjust hundreds of variables, Borla sound engineers rely on over three decades of experience to refine the acoustical properties of each muffler, compensating for the varied exhaust flow caused by the valves. Once Borla is satisfied with the "Sound of Power" throughout all rpm ranges, the system is then put into production.     FREE GROUND SHIPPING ON THIS BORLA EXHAUST SYSTEM!
  • C7 Corvette Corsa Exhaust Extreme Quad 4.5''Black Tips 14762Blk

    C7 Corvette Corsa Exhaust Extreme Quad 4.5''Black Tips 14762Blk

    $1,837.00
    Free Shipping
    CORSA's new C7 Corvette exhaust from Southern Car parts Fits NPP and Non-NPP Valve-back muffler systems and attaches behind the factory GM valves. Corsa exhausts from Southern Car Parts feature straight through designs, different sound levels, and most systems come with different tip options such as the black stealth tips and Polished double wall tips. CORSA RSC™ XTREME systems are Corsa's newest systems which are the loudest most aggressive systems Corsa offers. XTREME systems feature a deep growl at idle, bold during acceleration, and screams at high RPMs and still no drone at Cruise. CORSA RSC™ SPORT exhaust system is Corsa's Mid-Level Sounding exhaust and is best described as producing a bolder sound most evident between 3000 – 5000 RPM WOT. Corsa Sport Exhausts are characterized by High performance sound a distinct rumble at idle and aggressive sound through the gears but still no drone during cruising. CORSA RSC™ TOURING exhaust system is Corsa's Quietest System and responds with a more reserved, deep, V-8 sound, yet throaty under acceleration. The Touring Exhaust is characterized with a slightly louder then stock exhaust tone, quiet at idle and no droning at cruise. CORSA straight-through design coupled with RSC™ noise cancellation technology allows us to tune out the undesirable low frequencies that cause droning, while reducing back pressure. A reduction in back pressure allows the engine to produce more horsepower and torque. CORSA uses its patented Reflective Sound Cancellation™ (RSC™) technology to eliminate low frequency resonance while minimizing backpressure. Sound waves are reflected within the muffler case, producing a cancellation wave effect, with no flow restriction and without electronic devices.Corsa Exhausts Feature: No Resonance / Drone - due to noise cancellation technology – RSC is whisper quiet at highway speeds Great Performance Sound - we tune in the good sounds and cancel the bad without the use of baffles or wool packing material Increased Horsepower & Torque - due to straight-through design = increased flow and less backpressure There is no drone with the CORSA exhaust system because the CORSA exhaust system uses RSC technology to eliminate problem frequencies that cause interior drone/resonance at cruising speeds. CORSA's Chevrolet Corvette exhaust system features a patented non-restrictive Straight-through design reduces back pressure and frees up additional power resulting in improved horsepower and torque. As an additional bonus, your Chevrolet Corvette can result in greater fuel economy because of less back pressure and more power. Corsa Exhausts feature 304 Stainless construction throughout and are made in the USA. Corsa dB Series exhausts are their lower cost alternatives for trucks that feature mixed materials for construction and single wall tips depending on application. Please note there are 4 different sound levels available. Touring, Sport, Extreme and non-designated default systems where there is only one sound level. Xtreme - their loudest offering for those who want the loudest badest sounding system out their with an aggressive tone, CORSA's Sport systems for their mid sound level is a great alternative for customers who want an aggressive sounding unique exhaust but who do not necessarily want to hear it all the time. The sport option is a good option for mildly modified vehicles and for comfortable highway cruising, CORSA's Touring exhaust is their quietest system for those with highly modified engines or those who wish to only have a slightly louder tone then stock. If there is no designation on sound level (DB etc..) in the part name then the sound level is somewhere between a Sport and a Touring system.
  • C7 Corvette Stingray Exhaust - Borla 11874 S-Type Rear Section

    C7 Corvette Stingray Exhaust - Borla 11874 S-Type Rear Section

    $2,018.99
    Free Shipping
    Southern Car Parts is your leader in C7 Corvette Borla Exhaust Systems! The C7 Corvette Borla S-Type exhaust is the agressive mid range of the Borla Corvette Exhaust systems. This exhaust is not as aggessive as the Borla C7 ATAK and more aggressive than the C7 Borla Touring system. C7 BORLA Cat-Back exhausts feature patented, straight-through and multi-core technology to unleash hidden horsepower in your Corvette. Increased exhaust velocity adds power, driving excitement, fuel economy and the distinctive BORLA Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium austenitic stainless steel, superior to T-400 series knockoffs, to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. Best of all, BORLA stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.  Some C7 Corvette Borla systems use premium quality intregrated valves to ensure compatibility with multi-stage driving modes or fuel-saving cylinder deactivation systems. Borla uses patented computer-controlled technologies that allow them to adjust hundreds of variables, Borla sound engineers rely on over three decades of experience to refine the acoustical properties of each muffler, compensating for the varied exhaust flow caused by the valves. Once Borla is satisfied with the "Sound of Power" throughout all rpm ranges, the system is then put into production. FREE GROUND SHIPPING ON THIS PRODUCT!
  • C7 Corvette Magnaflow Exhaust System Competition Series 19171

    C7 Corvette Magnaflow Exhaust System Competition Series 19171

    $1,466.62
    Free Shipping
    MagnaFlow's C7 Corvette Performance Exhaust systems are rugged, reliable, built to last, and their legendary straight-through, wide-open, stainless steel mufflers provide the smooth, deep tone they are famous for. These exhaust kits and cat-back systems feature mandrel bends to ensure there are no flow restrictions and OEM-style barbed hangers for easy installation. All of MagnaFlow's exhaust systems are factory-checked for proper fit and dyno-tested to verify performance gains. All necessary installation hardware is included and the entire system is backed by MagnaFlow's lifetime warranty. Made in the USA and engineered to last, for those seeking increased performance and better economy, MagnaFlow Street Series Performance Exhaust systems deliver the smooth deep sound you want and the wide-open performance power you need. Our exhaust systems feature straight-through flow designs for the ultimate in unrestricted horsepower and torque for big power while maintaining exhaust efficiency. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. •Made in the U.S.A. •All Mandrel Bent Tubing •409 Stainless Steel Construction •Lifetime Warranty
  • C7 Corvette Borla Rear Section Exhaust S-Type 11880

    C7 Corvette Borla Rear Section Exhaust S-Type 11880

    $1,403.99
    Free Shipping
     The C7 Corvette Borla S-Type exhaust is the aggressive midrange of the Borla Corvette Exhaust systems. This exhaust is not as aggressive as the Borla C7 ATAK and more aggressive than the C7 Borla Touring system. C7 BORLA Cat-Back exhausts feature patented, straight-through and multi-core technology to unleash hidden horsepower in your Corvette. Increased exhaust velocity adds power, driving excitement, fuel economy and the distinctive BORLA Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium austenitic stainless steel, superior to T-400 series knockoffs, to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. Best of all, BORLA stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.  Part#Product TypePipe DiameterTip SizeTip DescriptionTip #Exit11880Rear Section Exhaust2.75" into muffler, dual 2.0" out4.25"Dual Round Rolled Angle-Cut47Quad Center Rear ExitUse this system if you want to eliminate the AFM valves  Some C7 Corvette Borla systems use premium quality integrated valves to ensure compatibility with multi-stage driving modes or fuel-saving cylinder deactivation systems. Borla uses patented computer-controlled technologies that allow them to adjust hundreds of variables, Borla sound engineers rely on over three decades of experience to refine the acoustical properties of each muffler, compensating for the varied exhaust flow caused by the valves. Once Borla is satisfied with the "Sound of Power" throughout all rpm ranges, the system is then put into production.     FREE GROUND SHIPPING ON THIS BORLA EXHAUST SYSTEM!APPLICATION:  2014, 2015, 2016, 2017, 2018 C7 Corvette
  • C7 Corvette Exhaust Corsa Sport Valve-Back Performance Exhaust System Black Poly Tip 14765B

    C7 Corvette Exhaust Corsa Sport Valve-Back Performance Exhaust System Black Poly Tip 14765B

    $1,929.00
    Free Shipping
    Improve the Performance and Sound of your new 2014-2018 C7 Corvette Stingray with the new Corsa Performance Exhaust System! Loud aggressive sound for the real High Performance enthusiast! This system is louder than the Sport system. No Drone Unwanted, low frequency sound waves are diverted through specifically designed channels and are reversed 180 degrees. Point of Cancellation Our patented technology is engineered to target and eliminate unwanted frequencies that cause interior resonance and drone. Performance of Sound Acoustic tuning creates an aggressive sound under acceleration that is styled to match the personality of your vehicle. Maximized HP and TQ A straight-through, unrestricted design reduces back pressure; increasing engine efficiency, horsepower and torque. *Material: 100% Stainless Steel  *Tip Finish: High Polished  *Fitment: 2014-2018 / 6.2L V8 / LT1  *Transmission Fitment: AUTO OR MANUAL  *Tubing O.D. Size: 2.75in.  *System Type: Valve-Back  *TIP Quantity: 4  *Quad Rear Exit .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }
  • Corvette ZO6  Rear Section Exhaust S-Type 11902

    Corvette ZO6 Rear Section Exhaust S-Type 11902

    $1,690.99
    Free Shipping
    S-Type Rear Section Exhaust; 2.75 in. Tubing; Incl. Connecting Pipes/Mufflers/Hardware/4.25 in. Round x 6.13 in. Long Rolled Angle-Cut Intercooled Tip; Quad Center Rear Exit; BORLA Type-S / Type-S II Cat-Back & Rear Section exhaust systems feature patented straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy, and a distinctive more aggressive sounding “S-Type” sound - respected by motoring enthusiasts everywhere. From the design characteristics of the inner cores to the amount of sound-absorbing composite filament, all specifications of BORLA® exhaust systems are tuned on a vehicle-by-vehicle basis for an optimum blend of performance and sound. Each system is built from premium 300-series austenitic stainless steel, superior to T-400 series knockoffs (such as 409), to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow & power, and precision computer-controlled CNC manufacturing ensures an accurate fit. Best of all, BORLA stands behind every system with a Million-Mile Warranty. Just what you’d expect from the world’s most experienced (and most winning) exhaust brand. *** BORLA®'s C7 Corvette rear section exhaust systems are covered under our Million-Mile Warranty for non-moving parts, the exhaust valves are warrantied for 3 years. Failures of original equipment AFM and NPP actuators are not covered by the Borla® arranty*** Part# Product Type Pipe Diameter Tip Size Tip Description Tip # Exit 11902 Rear Section Exhaust 2.75" 4.25" Dual Round Rolled Angle-Cut Intercooled 19 Quad Center Rear Exit
  • C7 Corvette Z06 Corsa Xtreme Axleback System with Quad 4.5" Black Pro-Series Tips 14766BLK

    C7 Corvette Z06 Corsa Xtreme Axleback System with Quad 4.5" Black Pro-Series Tips 14766BLK

    $2,115.00
    Free Shipping
    Fits/Applications:                                                                              2015-2018 Chevrolet C7 Corvette Z06, Coupe, Manual, 6.2L V8 2015-2018 Chevrolet C7 Corvette Z06, Coupe, Auto, 6.2L V8 2015-2018 Chevrolet C7 Corvette Z06, Convertible, Auto, 6.2L V8 2015-2018 Chevrolet C7 Corvette Z06, Convertible, Manual, 6.2L V8 Tips: Dual Rear Exit, Quad 4.5", Black Pro-Series    Sound: Xtreme Technology: CORSA's Patented RSC® Technology is designed for an AGGRESSIVE SOUND under acceleration and a DRONE-FREE EXPERIENCE during cruise. Every system is engineered specifically to each vehicle without drone while cruising.    
  • C7 Corvette MBRP Exhaust 3" Dual Muffler Axle

    C7 Corvette MBRP Exhaust 3" Dual Muffler Axle Back Exhaust System

    $1,059.99
    Free Shipping
    Features- 4" Quad Dual-walled Stainless Steel Tips - Easy Bolt-on Installation - Mandrel-bent 3" Tubing - Performance Sound & Style - High-flow Valveless Design - Keeps OEM valve motor - +13 LB-FT - +8 Horsepower - Increase FlowPRO SERIES For the serious performance enthusiast who demands the best. For your vehicle, there is no better stainless steel than T304 and no better system than the MBRP Pro series. With the highest chromium and nickel content of any exhaust, this is simply the best system money can buy.The Pro Series comes with a mirror polished, dual wall T304 stainless steel tip(s) included. Easy Installation MBRP systems are as much fun to install as to drive with on your muscle car. Bolt-on, no weld design makes installation a no hassle one and a half to two hour project. Everything is a direct fit to the OEM hangers and you get all the clamps and parts you will need, all in one box.Dyno Proven Your MBRP muscle car system has undergone countless hours on our in-house Mustang 1100 AWD-SE Chassis Dynomometer, hundreds of miles on road and track and numerous tweaks and modifications to get maximum performance. From the vehicle specific muffler design to the fully mandrel bent tubing to minimal bend degree angles, your MBRP performance system gets exhausted  fast. An MBRP performance exhaust system is the starting point to getting the most from cold air intakes, programmers, modules and downloaders.Built to Perform MBRP's performance exhaust systems are built to perform. Designed to maximize exhaust flow and minimize exhaust temperatures your ride will use less gas, last longer and perform better. Every system we sell has been built to the most exacting standards in the industry.Sound & Style Performance is one thing but at MBRP we believe that appearance and sound are just as important. Every MBRP performance exhaust system has been specifically tuned to get the optimal sound from your ride. Civilized when you need it to be and seriously aggressive when you want it, it is all classic muscle car. With our stamped logo on the tip and our unmistakable styling, there's no question that you have the hottest performance exhaust on the road - MBRP.This system does not work for an NPP equiped C7 Corvette.APPLICATION:  2014, 2015, 2016, 2017, 2018 C7 Corvette
  • C7 Corvette Borla ATAK Rear Section Exhaust System #11866

    C7 Corvette Borla ATAK Rear Section Exhaust System #11866

    $1,829.99
    Free Shipping
    C7 Corvette BORLA ATAK - The least most of the Borla Corvette Exhaust systems. If you're looking to increase the volume of your C7 Corvette Stingray exhaust, while also improving the exhaust tone and HP and Torque performance across the RPM range, than a Cat-Back exhaust is perfect for you, and there's no exhaust for your monster Chevrolet LS Small-Block V8 better than this new ATAK from Borla. Designed using Borla's Acoustically Tuned Applied Kinetic technology, this ATAK exhaust will provide your Corvette with a powerful and aggressive racing exhaust tone that will truly set it apart. This improved tone and increased volume doesn't come with any sort of compromise either--the ATAK will provide you class-leading performance gains, production quality, and minimal cabin drone! So, again, if you're looking to improve the over-all drivability and enjoyment of your Corvette Z06 or ZR1, look no further than this incredible ATAK Exhaust from Borla!   Part# Product Type Pipe Diameter Tip Size   Tip # Exit 11866 Rear Section Exhaust 2.75' into muffler dual 2.25" out 8.2"x3.66   51 Dual Center Rear Exit   Some C7 Corvette Borla systems use premium quality intregrated valves to ensure compatibility with multi-stage driving modes or fuel-saving cylinder deactivation systems. Borla uses patented computer-controlled technologies that allow them to adjust hundreds of variables, Borla sound engineers rely on over three decades of experience to refine the acoustical properties of each muffler, compensating for the varied exhaust flow caused by the valves. Once Borla is satisfied with the "Sound of Power" throughout all rpm ranges, the system is then put into production.     FREE GROUND SHIPPING ON THIS BORLA EXHAUST SYSTEM!APPLICATIONS: 2014, 2015, 2016, 2017, 2018 C7 CORVETTE
  • Borla 11855 S-Type Exhaust System C7 Corvette

    C7 Corvette Borla S-Type Exhaust System 11855

    $2,119.99
    Free Shipping
    With Round Intercooled Tips #11855 Southern Car Parts is your leader in C7 Corvette Borla Exhaust Systems! The C7 Corvette Borla S-Type exhaust is the agressive mid range of the Borla Corvette Exhaust systems. This exhaust is not as aggessive as the Borla C7 ATAK and more aggressive than the C7 Borla Touring system. C7 BORLA Cat-Back exhausts feature patented, straight-through and multi-core technology to unleash hidden horsepower in your Corvette. Increased exhaust velocity adds power, driving excitement, fuel economy and the distinctive BORLA Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium austenitic stainless steel, superior to T-400 series knockoffs, to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. Best of all, BORLA stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.  Some C7 Corvette Borla systems use premium quality intregrated valves to ensure compatibility with multi-stage driving modes or fuel-saving cylinder deactivation systems. Borla uses patented computer-controlled technologies that allow them to adjust hundreds of variables, Borla sound engineers rely on over three decades of experience to refine the acoustical properties of each muffler, compensating for the varied exhaust flow caused by the valves. Once Borla is satisfied with the "Sound of Power" throughout all rpm ranges, the system is then put into production.       FREE GROUND SHIPPING ON THIS BORLA EXHAUST SYSTEM!APPLICATION:  2014, 2015, 2016, 2017, 2018 C7 Corvette
  • C7 Corvette Borla S-Type Exhaust System 12669

    C7 Corvette Borla S-Type Exhaust System 12669

    $2,293.99
    Free Shipping
    2014-2018 Chevrolet Corvette (C7)/ Z06 6.2L V8 Automatic/Manual Trans Rear Wheel Drive 2drThis system features 3.00" pipe, a cat-delete "X" pipe and no AFM valves. This product is for Racing or Off-Road Use Only. S-Type Style - The mid range of the Borla Corvette Exhaust systems. This is not as aggressive as the ATAK and more aggressive than the Touring. BORLA Cat-Back exhausts feature patented, straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy and the distinctive BORLA Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium austenitic stainless steel, superior to T-400 series knockoffs, to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. Best of all, BORLA stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand. Some C7 Corvette Borla systems use premium quality integrated valves to ensure compatibility with multi-stage driving modes or fuel-saving cylinder deactivation systems. Borla uses patented computer-controlled technologies that allow them to adjust hundreds of variables, Borla sound engineers rely on over three decades of experience to refine the acoustical properties of each muffler, compensating for the varied exhaust flow caused by the valves. Once Borla is satisfied with the "Sound of Power" throughout all rpm ranges, the system is then put into production.  FREE GROUND SHIPPING ON THIS BORLA EXHAUST SYSTEM!APPLICATION: 2014, 2015, 2016, 2017, 2018 C7 Corvette
  • C7 Corvette Corsa Exhaust Extreme Quad 4.5''Black Tips 14762Blk

    C7 Corvette Corsa Exhaust Extreme Quad 4.5''Black Tips 14762Blk

    $1,837.00
    Free Shipping
    CORSA's new C7 Corvette exhaust from Southern Car parts Fits NPP and Non-NPP Valve-back muffler systems and attaches behind the factory GM valves. Corsa exhausts from Southern Car Parts feature straight through designs, different sound levels, and most systems come with different tip options such as the black stealth tips and Polished double wall tips. CORSA RSC™ XTREME systems are Corsa's newest systems which are the loudest most aggressive systems Corsa offers. XTREME systems feature a deep growl at idle, bold during acceleration, and screams at high RPMs and still no drone at Cruise. CORSA RSC™ SPORT exhaust system is Corsa's Mid-Level Sounding exhaust and is best described as producing a bolder sound most evident between 3000 – 5000 RPM WOT. Corsa Sport Exhausts are characterized by High performance sound a distinct rumble at idle and aggressive sound through the gears but still no drone during cruising. CORSA RSC™ TOURING exhaust system is Corsa's Quietest System and responds with a more reserved, deep, V-8 sound, yet throaty under acceleration. The Touring Exhaust is characterized with a slightly louder then stock exhaust tone, quiet at idle and no droning at cruise. CORSA straight-through design coupled with RSC™ noise cancellation technology allows us to tune out the undesirable low frequencies that cause droning, while reducing back pressure. A reduction in back pressure allows the engine to produce more horsepower and torque. CORSA uses its patented Reflective Sound Cancellation™ (RSC™) technology to eliminate low frequency resonance while minimizing backpressure. Sound waves are reflected within the muffler case, producing a cancellation wave effect, with no flow restriction and without electronic devices.Corsa Exhausts Feature: No Resonance / Drone - due to noise cancellation technology – RSC is whisper quiet at highway speeds Great Performance Sound - we tune in the good sounds and cancel the bad without the use of baffles or wool packing material Increased Horsepower & Torque - due to straight-through design = increased flow and less backpressure There is no drone with the CORSA exhaust system because the CORSA exhaust system uses RSC technology to eliminate problem frequencies that cause interior drone/resonance at cruising speeds. CORSA's Chevrolet Corvette exhaust system features a patented non-restrictive Straight-through design reduces back pressure and frees up additional power resulting in improved horsepower and torque. As an additional bonus, your Chevrolet Corvette can result in greater fuel economy because of less back pressure and more power. Corsa Exhausts feature 304 Stainless construction throughout and are made in the USA. Corsa dB Series exhausts are their lower cost alternatives for trucks that feature mixed materials for construction and single wall tips depending on application. Please note there are 4 different sound levels available. Touring, Sport, Extreme and non-designated default systems where there is only one sound level. Xtreme - their loudest offering for those who want the loudest badest sounding system out their with an aggressive tone, CORSA's Sport systems for their mid sound level is a great alternative for customers who want an aggressive sounding unique exhaust but who do not necessarily want to hear it all the time. The sport option is a good option for mildly modified vehicles and for comfortable highway cruising, CORSA's Touring exhaust is their quietest system for those with highly modified engines or those who wish to only have a slightly louder tone then stock. If there is no designation on sound level (DB etc..) in the part name then the sound level is somewhere between a Sport and a Touring system. .embed-container { position: relative; padding-bottom: 56.25%; height: 0; overflow: hidden; max-width: 100%; } .embed-container iframe, .embed-container object, .embed-container embed { position: absolute; top: 0; left: 0; width: 100%; height: 100%; }
  • C7 Corvette Borla ATAK Rear Section Exhaust System #11878

    C7 Corvette Borla ATAK Rear Section Exhaust System #11878

    $1,648.99
    Free Shipping
    2014-2018 Chevrolet Corvette (C7) 6.2L V8 Automatic/Manual Trans Rear Wheel Drive 2dr w/o NPP dual mode exhaust. C7 Corvette BORLA ATAK - The least most of the Borla Corvette Exhaust systems. If you're looking to increase the volume of your C7 Corvette Stingray exhaust, while also improving the exhaust tone and HP and Torque performance across the RPM range, then a Cat-Back exhaust is perfect for you, and there's no exhaust for your monster Chevrolet Small-Block V8 better than this new ATAK from Borla. Designed using Borla's Acoustically Tuned Applied Kinetic technology, this ATAK exhaust will provide your Corvette with a powerful and aggressive racing exhaust tone that will truly set it apart. This improved tone and increased volume don't come with any sort of compromise either--the ATAK will provide you class-leading performance gains, production quality, and minimal cabin drone! So, again, if you're looking to improve the overall driveability and enjoyment of your Corvette, look no further than this incredible ATAK Exhaust from Borla! Some C7 Corvette Borla systems use premium quality integrated valves to ensure compatibility with multi-stage driving modes or fuel-saving cylinder deactivation systems. Borla uses patented computer-controlled technologies that allow them to adjust hundreds of variables, Borla sound engineers rely on over three decades of experience to refine the acoustical properties of each muffler, compensating for the varied exhaust flow caused by the valves. Once Borla is satisfied with the "Sound of Power" throughout all rpm ranges, the system is then put into production.Part#Product TypePipe DiameterTip SizeTip DescriptionTip #Exit11878Rear Section Exhaust2.75" into muffler, dual 2.0" out4.25"Dual Round Rolled Angle-Cut47Quad Center Rear Exit FREE GROUND SHIPPING ON THIS BORLA EXHAUST SYSTEM!APPLICATION: 2014, 2015, 2016, 2017, 2018 C7 Corvette
  • Corvette ZO6  Rear Section Exhaust S-Type 11905

    Corvette ZO6 Rear Section Exhaust S-Type 11905

    $1,609.99
    Free Shipping
    2015-2018 Corvette Z06 6.2L AT/MT Rear Wheel Drive 2dr. with NPP dual mode exhaust. BORLA has announced the development of a revolutionary new exhaust technology that enables their engineers to deliver unprecedented vehicle-specific control over the acoustical note of an exhaust throughout the RPM range, while retaining 100% of the power-adding capabilities of BORLA’s patented Multicore design.    Called ATAK (Acoustically-Tuned Applied Kinetics), this exclusive technology (U.S. patent #5,248,859) produces the highest available dB (decibel) levels in the BORLA street-legal lineup, and is designed for high-performance purists who prefer exhaust notes over their stereos. The focus of ATAK is to pump the volume while retaining clarity of sound, at the same time avoiding the drone and distortion typically found in louder exhausts. With ATAK, the sound output is tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output.    The development of each ATAK system begins with extensive study of each vehicle’s acoustical properties. The technology is based on custom-tuned attributes of the internal muffler cores, which are calibrated on a vehicle-by-vehicle basis to deliver the most desirable sound. BORLA is now shipping Cat-Back and/or Rear Section ATAK exhaust systems for a wide variety of popular applications.    Like all BORLA exhaust products, each system is handmade in the USA by master craftspeople and features premium 300-Series austenitic stainless steel construction, mandrel bending by computer-controlled CNC machinery to ensure maximum flow and a perfect fit, mirror-polished tips, and a Million-Mile Warranty Part# Product Type Pipe Diameter Tip Size Tip Description Tip # Exit 11904 Rear Section Exhaust 2.75" 4.25" Dual Round Rolled Angle-Cut 47 Quad Center Rear Exit   This system includes NPP valves.
  • C7 Corvette Borla ATAK Exhaust System 11856

    C7 Corvette Borla ATAK Exhaust System 11856

    $2,227.99
    Free Shipping
    Round Intercooled Tips #11856 Southern Car Parts is your leader in C7 Corvette Borla Exhaust Systems! The C7 Corvette BORLA ATAK exhaust is the more agressive sounding (more agressive than the Borla Sport system) 100% stainless exhaust system for your C7 Corvette. If you're looking to increase the exhaust note volume of your C7 Corvette Stingray, while also improving the exhaust tone, HP, and Torque performance across the RPM range, then a Borla Cat-Back exhaust is perfect for you. There is no exhaust better for your monster Chevrolet LS Small-Block V8 better than this new ATAK from Borla. Designed using Borla's Acoustically Tuned Applied Kinetic technology, this ATAK exhaust system will provide your C7 Corvette with a powerful and aggressive racing exhaust tone that will make it so much more fun to drive. The improved exhaust tone and increased volume doesn't come with any power compromises either. Most customers see a 5-7hp performance boost with a free flowing Borla C7 exhaust. The Borla Corvette ATAK will make your stereo obsolete as you will just enjoy listening to the exhaust. There is very minimal to no cabin drone with the Borla ATAK system. So, again, if you're looking to improve the over-all drivability and enjoyment of your C7 Corvette Stingray look no further than this incredible ATAK Exhaust from Borla!             Some C7 Corvette Borla systems use premium quality intregrated valves to ensure compatibility with multi-stage driving modes or fuel-saving cylinder deactivation systems. Borla uses patented computer-controlled technologies that allow them to adjust hundreds of variables, Borla sound engineers rely on over three decades of experience to refine the acoustical properties of each muffler, compensating for the varied exhaust flow caused by the valves. Once Borla is satisfied with the "Sound of Power" throughout all rpm ranges, the system is then put into production.     FREE GROUND SHIPPING ON THIS BORLA EXHAUST SYSTEM!APPLICATIONS: 2014, 2015, 2016, 2017, 2018 C7 CORVETTE
  • C7 Corvette MBRP Exhaust 3" Dual Muffler Axle Back with Quad 4" Dual Wall Tips BLACK COATED

    C7 Corvette MBRP Exhaust 3" Dual Muffler Axle Back with Quad 4" Dual Wall Tips BLACK COATED

    $1,279.99
    Free Shipping
    - 4" Quad Dual-walled Stainless Steel Tips - Easy Bolt-on Installation - Mandrel-bent 3" Tubing - Performance Sound & Style - High-flow Valveless Design - Keeps OEM valve motor - +13 LB-FT - +8 Horsepower - Increase FlowBlack Series For the hottest look on the market right now look no further than MBRB's new Black Series. Using a high heat coating that is designed specifically for exhaust applications, our new Black Series is sure to turn heads and provide excellent performance for years to come.Utilizing th same manafacturing process as our stainless systems you know these systems will fit right the first time. Our Black Series features a 1-year Warranty on the coating and a 3-year warranty on the exhaust components.Easy Installation MBRP systems are as much fun to install as to drive with on your muscle car. Bolt-on, no weld design makes installation a no hassle one and a half to a two-hour project. Everything is direct fit to the OEM hangers and you get all the clamps and parts you will need, all in one box.Dyno Proven Your MBRP muscle car system has undergone countless hours on our in-house Mustang 1100 AWD-SE Chassis Dynomometer, hundreds of miles on road and track and numerous tweaks and modifications to get maximum performance. From the vehicle specific muffler design to the fully mandrel bent tubing to minimal bend degree angles, your MBRP performance system gets exhausted fast. An MBRP performance exhaust system is the starting point to getting the most from cold air intakes, programmers, modules, and downloaders.Built to Perform MBRP's performance exhaust systems are built to perform. Designed to maximize exhaust flow and minimize exhaust temperatures your ride will use less gas, last longer and perform better. Every system we sell has been built to the most exacting standards in the industry.Sound & Style Performance is one thing but at MBRP we believe that appearance and sound are just as important. Every MBRP performance exhaust system has been specifically tuned to get the optimal sound from your ride. Civilized when you need it to be and seriously aggressive when you want it, it is all classic muscle car. With our stamped logo on the tip and our unmistakable styling, there's no question that you have the hottest performance exhaust on the road - MBRP.This system does not work for an NPP equipped C7 Corvette. APPLICATION:  2014, 2015, 2016, 2017, 2018 C7 Corvette
  • C7 Corvette Borla ATAK Rear Section Exhaust System #11869

    C7 Corvette Borla ATAK Rear Section Exhaust System #11869

    $1,377.99
    Free Shipping
    C7 Corvette BORLA ATAK - The least most of the Borla Corvette Exhaust systems. If you're looking to increase the volume of your C7 Corvette Stingray exhaust, while also improving the exhaust tone and HP and Torque performance across the RPM range, than a Cat-Back exhaust is perfect for you, and there's no exhaust for your monster Chevrolet Small-Block V8 better than this new ATAK from Borla. Designed using Borla's Acoustically Tuned Applied Kinetic technology, this ATAK exhaust will provide your Corvette with a powerful and aggressive racing exhaust tone that will truly set it apart. This improved tone and increased volume doesn't come with any sort of compromise either--the ATAK will provide you class-leading performance gains, production quality, and minimal cabin drone! So, again, if you're looking to improve the over-all drivability and enjoyment of your Corvette , look no further than this incredible ATAK Exhaust from Borla! This system retains AFM valves   Part# Product Type Pipe Diameter Tip Size Tip Description Tip # Exit 11869 Rear Section Exhaust 2.75' into muffler dual 2.0" out 4.25" Dual Round Rolled Angle-Cut Intercooled 19 Quad Center Rear Exit   Some C7 Corvette Borla systems use premium quality intregrated valves to ensure compatibility with multi-stage driving modes or fuel-saving cylinder deactivation systems. Borla uses patented computer-controlled technologies that allow them to adjust hundreds of variables, Borla sound engineers rely on over three decades of experience to refine the acoustical properties of each muffler, compensating for the varied exhaust flow caused by the valves. Once Borla is satisfied with the "Sound of Power" throughout all rpm ranges, the system is then put into production.     FREE GROUND SHIPPING ON THIS BORLA EXHAUST SYSTEM!APPLICATIONS: 2014, 2015, 2016, 2017, 2018 C7 CORVETTE
  • C7 Corvette Mild2Wild Exhaust Control Switch for NPP

    C7 Corvette Mild2Wild Exhaust Control Switch for NPP

    $89.95
    Free Shipping
      Imagine having the ability to turn your C7 Corvette Z06, Grand Sport and Stingray NPP exhaust from MILD (exhaust ports closed) to WILD (exhaust ports open) using the supplied remote.   This revolutionary product lets you control your, 2014-Present Corvette Z06,Grand Sport, Stingray or NPP exhaust system on demand via a tiny wireless remote or the Homelink feature in your car . One of the coolest technologies on the new 2014-Present Corvette Z06,Grand Sport, Stingray NPP equiped Corvette is the “bi-mode” exhaust. Whisper quite up until 3500 RPM and then a wide open race car sound as the flaps located in the tips open. The problem is the inability to control this feature.    This patent pending product requires no drilling or running wires through your car. It’s a simple 5 min simple plug and play installation that anyone can do. Once installed, you will have full control over the exhaust mode, via a simple ON/OFF remote wireless controller. You also will get two sleek ON/OFF wireless controls that can be mounted anywhere and will control the exhaust up to 50’ away. The “OFF” mode gives you that race car sound 100% of the time. The “ON” mode works as the stock setting and is quiet to preset OEM 3,500 RPM so the system will work just like the stock system . The switch can be used anytime the car is running, allowing you to show your friends what a cool exhaust you have as you can use the remote and open and close the flaps on demand.     You will receive the professionally engineered plug and play wireless receiver, two miniature remotes (batteries included) and the necessary homelink programing instructions. Believe me you will be happy with the quality and fit of this Corvette exhaust controller.
  • Corvette C7 Mild2Wild Exhaust On Demand Switch

    C7 Corvette Mild2Wild Exhaust On Demand Switch

    $89.95
    Free Shipping
    C7 Corvette Exhaust Mild 2 Wild Switch   Imagine having the ability to turn your C7 Corvette Z06, Grand Sport and Stingray NPP exhaust from MILD (exhaust ports closed) to WILD (exhaust ports open) using the supplied remote. This revolutionary product lets you control your, 2014-Present Corvette Z06,Grand Sport, Stingray or NPP exhaust system on demand via a tiny wireless remote or the Homelink feature in your car . One of the coolest technologies on the new 2014-Present Corvette Z06,Grand Sport, Stingray NPP equiped Corvette is the “bi-mode” exhaust. Whisper quite up until 3500 RPM and then a wide open race car sound as the flaps located in the tips open. The problem is the inability to control this feature. This patent pending product requires no drilling or running wires through your car. It’s a simple 5 min simple plug and play installation that anyone can do. Once installed, you will have full control over the exhaust mode, via a simple ON/OFF remote wireless controller. You also will get two sleek ON/OFF wireless controls that can be mounted anywhere and will control the exhaust up to 50’ away. The “OFF” mode gives you that race car sound 100% of the time. The “ON” mode works as the stock setting and is quiet to preset OEM 3,500 RPM so the system will work just like the stock system . The switch can be used anytime the car is running, allowing you to show your friends what a cool exhaust you have as you can use the remote and open and close the flaps on demand. You will receive the professionally engineered plug and play wireless receiver, two miniature remotes (batteries included) and the necessary homelink programing instructions. Believe me you will be happy with the quality and fit of this Corvette exhaust controller.
  • C7 CORVETTE BILLY BOAT GEN3 FUSION EXHAUST SYSTEM ROUND TIPS FCOR=-0665

    C7 Corvette Billy Boat GEN3 Fusion Exhaust System Round Tips

    $1,826.94
    Free Shipping
    Please note: This item is sold at our rock bottom price, the best price in the world and we cannot discount further. The Billy Boat C7 Corvette Exhaust takes the already awesome stock C7 Stingray exhaust design and improves it to a perfect blend of sound and power.  The Billy Boat Bullet is the most aggressive performance exhaust system that they manufacturer. It's one of the leading systems in the Corvette aftermarket exhaust market. The C7 Corvette Billy Boat Bullet comes in a full 3" piping system. This GEN3 Fusion system comes with quad 4" double wall round polished stainless steel exhaust tips.  Shown with SPEEDWAY Tips below:   The Gen3 Fusion exhaust for the C7 Corvette is the result of Billy Boat's extensive development over the last six years of NPP exhaust development. We have learned a few things, and we have incorporated them in the Gen3.   * Uses the exclusive 3" butterfly valve at both the front and rear of the system. (factory is 2.5") * The 3" side is truly straight through for more volume at idle, cruising, and head turning under acceleration. * While it maintains all the modes of the C7, it turns them up a notch for true driving enjoyment.   Since 1989 Billy Boat Performance Exhaust has designed, tested, and manufactured the highest quality stainless steel exhaust systems available. Originally specializing in Porsche 911 performance exhaust systems, oil coolers, and intercoolers, B&B introduced the Tri-Flo line named after its unique 3-into-1 Porsche header. Today in its state-of-the-art facility, Billy Boat continues to develop the highest performing exhaust systems for most sports cars, trucks, and SUVs. With an in-house dyno facility and R&D staff, we stay on top of current vehicle trends and deliver products that fit and perform to an unsurpassed level of standards. Southern Car Parts was the Sponsor of the Chad Boat #84 Toyota for the Chicago race back in 2013.... We've got a great business relationship with Billy Boat Exhaust and Southern Car Parts knows the B&B Product line better than anyone in the business. We stock many C5, C6 and C7 exhaust systems. APPLICATION:  2014, 2015, 2016, 2017, 2018 C7 Corvette
  • C7 Corvette Billy Boat BULLET Exhaust System Round Tips

    C7 Corvette Billy Boat BULLET Exhaust System Round Tips

    $1,268.22
    Free Shipping
    Please note: This item is sold at our rock bottom price, the best price in the world and we cannot discount further. **We Keep this in stock most of the time, please call us to verify, most vendors do not and you have to wait 10-14 days** The Billy Boat C7 Corvette Exhaust takes the already awesome stock C7 Stingray exhaust design and improves it to a perfect blend of sound and power.  The Billy Boat Bullet is the most aggressive performance exhaust system that they manufacturer. It's one of the leading systems in the Corvette aftermarket exhaust market. The C7 Corvette Billy Boat Bullet comes in a full 3" piping system.  This Bullet system comes with quad 4" double wall round polished stainless steel exhaust tips.  Since 1989 Billy Boat Performance Exhaust has designed, tested, and manufactured the highest quality stainless steel exhaust systems available. Originally specializing in Porsche 911 performance exhaust systems, oil coolers, and intercoolers, B&B introduced the Tri-Flo line named after its unique 3-into-1 Porsche header. Today in its state-of-the-art facility, Billy Boat continues to develop the highest performing exhaust systems for most sports cars, trucks, and SUVs. With an in-house dyno facility and R&D staff, we stay on top of current vehicle trends and deliver products that fit and perform to an unsurpassed level of standards. Southern Car Parts was the Sponsor of the Chad Boat #84 Toyota for the Chicago race back in 2013.... We've got a great business relationship with Billy Boat Exhaust and Southern Car Parts knows the B&B Product line better than anyone in the business. We stock many C5, C6 and C7 exhaust systems. APPLICATION:  2014, 2015, 2016, 2017, 2018 C7 Corvette
  • C7 Z06 CORVETTE BILLY BOAT GEN3 FUSION EXHAUST SYSTEM ROUND TIPS FCOR 0675

    C7 Z06 Corvette Billy Boat GEN3 Fusion Exhaust System Round Tips

    $1,819.95
    Free Shipping
    Please note: This item is sold at our rock bottom price, the best price in the world and we cannot discount further. The Billy Boat C7 Corvette Z06 Exhaust takes the already awesome stock C7 Stingray exhaust design and improves it to a perfect blend of sound and power.  The Billy Boat Bullet is the most aggressive performance exhaust system that they manufacturer. It's one of the leading systems in the Corvette aftermarket exhaust market. The C7 Corvette Billy Boat Bullet comes in a full 3" piping system. This GEN3 Fusion system comes with quad 4" double wall round polished stainless steel exhaust tips.  Shown with SPEEDWAY Tips below:   The Gen3 Fusion exhaust for the C7 Corvette is the result of Billy Boat's extensive development over the last six years of NPP exhaust development. We have learned a few things, and we have incorporated them in the Gen3.   * Uses the exclusive 3" butterfly valve at both the front and rear of the system. (factory is 2.5") * The 3" side is truly straight through for more volume at idle, cruising, and head turning under acceleration. * While it maintains all the modes of the C7, it turns them up a notch for true driving enjoyment.   Since 1989 Billy Boat Performance Exhaust has designed, tested, and manufactured the highest quality stainless steel exhaust systems available. Originally specializing in Porsche 911 performance exhaust systems, oil coolers, and intercoolers, B&B introduced the Tri-Flo line named after its unique 3-into-1 Porsche header. Today in its state-of-the-art facility, Billy Boat continues to develop the highest performing exhaust systems for most sports cars, trucks, and SUVs. With an in-house dyno facility and R&D staff, we stay on top of current vehicle trends and deliver products that fit and perform to an unsurpassed level of standards. Southern Car Parts was the Sponsor of the Chad Boat #84 Toyota for the Chicago race back in 2013.... We've got a great business relationship with Billy Boat Exhaust and Southern Car Parts knows the B&B Product line better than anyone in the business. We stock many C5, C6 and C7 exhaust systems. APPLICATIONS: 2014, 2015, 2016, 2017, 2018 C7 CORVETTE
  • C7 CORVETTE BILLY BOAT PRT EXHAUST SYSTEM ROUND TIPS FCOR-0625

    C7 Corvette Billy Boat PRT Exhaust System Round Tips

    $1,275.00
    Free Shipping
    Please note: This item is sold at our rock bottom price, the best price in the world and we cannot discount further. **We Keep this in stock most of the time, please call us to verify, most vendors do not and you have to wait 10-14 days** The new B&B PRT system provides a powerful, aggressive, exhaust tone that's also appreciable and tame at lower, cruising RPMs. Designed to offer the best in HP and Torque gains across the RPM range, and coupled with the Billy Boat Purge Resonance Technology for minimal cabin drone, this system provides all of the benefits of the well-respected Billy Boat Bullet system, in a slightly less tonally aggressive package. A great exhaust for either the performance junkie with the garage queen, or the man who makes his C7 Corvette his daily driver. This PRT Bullet system comes with quad 4" double wall round polished stainless steel exhaust tips.    Since 1989 Billy Boat Performance Exhaust has designed, tested, and manufactured the highest quality stainless steel exhaust systems available. Originally specializing in Porsche 911 performance exhaust systems, oil coolers, and intercoolers, B&B introduced the Tri-Flo line named after its unique 3-into-1 Porsche header. Today in its state-of-the-art facility, Billy Boat continues to develop the highest performing exhaust systems for most sports cars, trucks, and SUVs. With an in-house dyno facility and R&D staff, we stay on top of current vehicle trends and deliver products that fit and perform to an unsurpassed level of standards. Southern Car Parts was the Sponsor of the Chad Boat #84 Toyota for the Chicago race back in 2013.... We've got a great business relationship with Billy Boat Exhaust and Southern Car Parts knows the B&B Product line better than anyone in the business. We stock many C5, C6 and C7 exhaust systems. APPLICATION:  2014, 2015, 2016, 2017, 2018 C7 Corvette
  • C7 CORVETTE BILLY BOAT BULLET EXHAUST SYSTEM SPEEDWAY TIPS FCOR-0617

    C7 Corvette Billy Boat BULLET Exhaust System SPEEDWAY Tips

    $1,275.08
    Free Shipping
    Please note: This item is sold at our rock bottom price, the best price in the world and we cannot discount further. **We Keep this in stock most of the time, please call us to verify, most vendors do not and you have to wait 10-14 days** The Billy Boat C7 Corvette Exhaust takes the already awesome stock C7 Stingray exhaust design and improves it to a perfect blend of sound and power.  The Billy Boat Bullet is the most aggressive performance exhaust system that they manufacturer. It's one of the leading systems in the Corvette aftermarket exhaust market. The C7 Corvette Billy Boat Bullet comes in a full 3" piping system.  This Bullet system comes with dual SPEEDWAY polished stainless steel exhaust tips.  Since 1989 Billy Boat Performance Exhaust has designed, tested, and manufactured the highest quality stainless steel exhaust systems available. Originally specializing in Porsche 911 performance exhaust systems, oil coolers, and intercoolers, B&B introduced the Tri-Flo line named after its unique 3-into-1 Porsche header. Today in its state-of-the-art facility, Billy Boat continues to develop the highest performing exhaust systems for most sports cars, trucks, and SUVs. With an in-house dyno facility and R&D staff, we stay on top of current vehicle trends and deliver products that fit and perform to an unsurpassed level of standards. Southern Car Parts was the Sponsor of the Chad Boat #84 Toyota for the Chicago race back in 2013.... We've got a great business relationship with Billy Boat Exhaust and Southern Car Parts knows the B&B Product line better than anyone in the business. We stock many C5, C6 and C7 exhaust systems. APPLICATION:  2014, 2015, 2016, 2017, 2018 C7 Corvette
  • C7 Corvette Akrapovic Titanium Exhaust-Axle Back

    C7 Corvette Akrapovic Titanium Exhaust-Axle Back

    $4,099.00
    Free Shipping
    Slip-On (Axle Back) Exhaust System in TitaniumThe very top of the line in Corvette exhaust! For the C7 Corvette owner that demands the absolute best quality, best sound, and best materials. The Akrapovic exhaust systems are made from the finest materials on Earth - titanium. Why titanium? Many reasons; weight is less than the standard run of the mill stainless steel, titanium is also resistant to rust and weather and it's also capable of producing better overall sound out of your Corvette.Southern Car Parts has long been the leader in Corvette Akrapovic exhaust systems. We have extensive knowledge and extensive experience in not only selling these top of the line systems, but we have also installed and run them in our Corvettes for over seven years. When you give us a call and have a question about purchasing an Akrapovic system you can rest assured you'll get a real answer and an honest answer that we'll stand behind.The Akrapovič Titanium Slip-On Line system is the first and best steps in exhaust tuning. Crafted from high-grade titanium, which considerably reduces the weight in comparison to the stock system, it has been perfectly designed to fit directly onto the existing link pipes. The system increases power, provides better throttle response, and improves torque, and also conjures up an amazing sound from the naturally-aspirated V8 engine. The Slip-On Line system has four valves, designed for the first pair to operate in four-cylinder mode and the second set to come into action according to the driver’s specifications. The system is developed to be compatible with the car’s drive mode selector, and Akrapovič engineers have developed an electronic device to drive the exhaust valves for each mode—Weather, Eco, Tour, Sport, and Track—giving the driver an even greater opportunity to enjoy the sound of the Akrapovič Slip-On Line across the whole spectrum of the car’s performance. It’s topped off by four large-diameter carbon fiber tailpipes with titanium inners, to make the Slip-On clearly recognizable as an exhaust that means business.If the Akrapovič Slip-On system replaces the GM NPP exhaust system, the Slip-On Line maintains the valve regulation of the NPP system.If the C7 Corvette is not equipped with a GM Performance exhaust (NPP exhaust), then the Control Kit (P-HF886) and Valve Actuator Kit (P-HF868) are mandatory. For C7 Corvette s with a Performance Exhaust (NPP exhaust), neither the Control Kit (P-HF886) nor the Valve Actuator Kit (P-HF868) is needed.Sound ClipsPerformance GraphInstallation InstructionsApplication: 2014, 2015, 2016, 2017, 2018 C7 Corvette UNITSTOCKAKRAPOVIČMAX GAINmaximumpowerkW322.6 at 5900 rpm328.4 at 5900 rpm+ 6.3 at 5900 rpm
  • C7 Corvette Magnaflow NPP Exhaust System STREET Series 19172

    C7 Corvette Magnaflow NPP Exhaust System STREET Series 19172

    $2,371.99
    Free Shipping
    MagnaFlow's C7 Corvette Performance Exhaust systems are rugged, reliable, built to last, and their legendary straight-through, wide-open, stainless steel mufflers provide the smooth, deep tone they are famous for. These exhaust kits and cat-back systems feature mandrel bends to ensure there are no flow restrictions and OEM-style barbed hangers for easy installation. All of MagnaFlow's exhaust systems are factory-checked for proper fit and dyno-tested to verify performance gains. All necessary installation hardware is included and the entire system is backed by MagnaFlow's lifetime warranty. Made in the USA and engineered to last, for those seeking increased performance and better economy, MagnaFlow Street Series Performance Exhaust systems deliver the smooth deep sound you want and the wide-open performance power you need. Our exhaust systems feature straight-through flow designs for the ultimate in unrestricted horsepower and torque for big power while maintaining exhaust efficiency. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. •Made in the U.S.A. •All Mandrel Bent Tubing •409 Stainless Steel Construction •Lifetime Warranty
  • C7 Corvette Magnaflow Exhaust System Competition Series 19170

    C7 Corvette Magnaflow Exhaust System Competition Series 19170

    $1,556.60
    Free Shipping
    MagnaFlow's C7 Corvette Performance Exhaust systems are rugged, reliable, built to last, and their legendary straight-through, wide-open, stainless steel mufflers provide the smooth, deep tone they are famous for. These exhaust kits and cat-back systems feature mandrel bends to ensure there are no flow restrictions and OEM-style barbed hangers for easy installation. All of MagnaFlow's exhaust systems are factory-checked for proper fit and dyno-tested to verify performance gains. All necessary installation hardware is included and the entire system is backed by MagnaFlow's lifetime warranty. Made in the USA and engineered to last, for those seeking increased performance and better economy, MagnaFlow Street Series Performance Exhaust systems deliver the smooth deep sound you want and the wide-open performance power you need. Our exhaust systems feature straight-through flow designs for the ultimate in unrestricted horsepower and torque for big power while maintaining exhaust efficiency. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. •Made in the U.S.A. •All Mandrel Bent Tubing •409 Stainless Steel Construction •Lifetime Warranty
  • C7 Corvette Magnaflow NPP Exhaust System COMPETITION Series 19173

    C7 Corvette Magnaflow NPP Exhaust System COMPETITION Series 19173

    $2,371.99
    Free Shipping
    MagnaFlow's C7 Corvette Performance Exhaust systems are rugged, reliable, built to last, and their legendary straight-through, wide-open, stainless steel mufflers provide the smooth, deep tone they are famous for. These exhaust kits and cat-back systems feature mandrel bends to ensure there are no flow restrictions and OEM-style barbed hangers for easy installation. All of MagnaFlow's exhaust systems are factory-checked for proper fit and dyno-tested to verify performance gains. All necessary installation hardware is included and the entire system is backed by MagnaFlow's lifetime warranty. Made in the USA and engineered to last, for those seeking increased performance and better economy, MagnaFlow Street Series Performance Exhaust systems deliver the smooth deep sound you want and the wide-open performance power you need. Our exhaust systems feature straight-through flow designs for the ultimate in unrestricted horsepower and torque for big power while maintaining exhaust efficiency. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. •Made in the U.S.A. •All Mandrel Bent Tubing •409 Stainless Steel Construction •Lifetime Warranty
  • C7 CORVETTE BILLY BOAT PRT EXHAUST SYSTEM SPEEDWAY TIPS FCOR-062

    C7 Corvette Billy Boat PRT Exhaust System SPEEDWAY Tips

    $1,275.08
    Free Shipping
    **We Keep this in stock most of the time, please call us to verify, most vendors do not and you have to wait 10-14 days**Please note: This item is sold at our rock bottom price, the best price in the world and we cannot discount further.The new B&B PRT system provides a powerful, aggressive, exhaust tone that's also appreciable and tame at lower, cruising RPMs. Designed to offer the best in HP and Torque gains across the RPM range, and coupled with the Billy Boat Purge Resonance Technology for minimal cabin drone, this system provides all of the benefits of the well-respected Billy Boat Bullet system, in a slightly less tonally aggressive package. A great exhaust for either the performance junkie with the garage queen, or the man who makes his C7 Corvette his daily driver.The Billy Boat C7 Corvette Exhaust takes the already awesome stock C7 Stingray exhaust design and improves it to a perfect blend of sound and power. The C7 Corvette Billy Boat Bullet comes in a full 3" piping system. This PRT Bullet system comes with SPEEDWAY polished stainless steel exhaust tips.  Since 1989 Billy Boat Performance Exhaust has designed, tested, and manufactured the highest quality stainless steel exhaust systems available. Originally specializing in Porsche 911 performance exhaust systems, oil coolers, and intercoolers, B&B introduced the Tri-Flo line named after its unique 3-into-1 Porsche header. Today in its state-of-the-art facility, Billy Boat continues to develop the highest performing exhaust systems for most sports cars, trucks, and SUVs. With an in-house dyno facility and R&D staff, we stay on top of current vehicle trends and deliver products that fit and perform to an unsurpassed level of standards. Southern Car Parts was the Sponsor of the Chad Boat #84 Toyota for the Chicago race back in 2013.... We've got a great business relationship with Billy Boat Exhaust and Southern Car Parts knows the B&B Product line better than anyone in the business. We stock many C5, C6 and C7 exhaust systems. APPLICATION:  2014, 2015, 2016, 2017, 2018 C7 Corvette
  • C7 Corvette Magnaflow Exhaust System Street Series 15316

    C7 Corvette Magnaflow Exhaust System Street Series 15316

    $3,241.81
    Free Shipping
    MagnaFlow's C7 Corvette Performance Exhaust systems are rugged, reliable, built to last, and their legendary straight-through, wide-open, stainless steel mufflers provide the smooth, deep tone they are famous for. These exhaust kits and cat-back systems feature mandrel bends to ensure there are no flow restrictions and OEM-style barbed hangers for easy installation. All of MagnaFlow's exhaust systems are factory-checked for proper fit and dyno-tested to verify performance gains. All necessary installation hardware is included and the entire system is backed by MagnaFlow's lifetime warranty. Made in the USA and engineered to last, for those seeking increased performance and better economy, MagnaFlow Street Series Performance Exhaust systems deliver the smooth deep sound you want and the wide-open performance power you need. Our exhaust systems feature straight-through flow designs for the ultimate in unrestricted horsepower and torque for big power while maintaining exhaust efficiency. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. •Made in the U.S.A. •All Mandrel Bent Tubing •409 Stainless Steel Construction •Lifetime Warranty
  • C7 Corvette aFe Power MACH Force-Xp 3"-2 1/2" Axle-Back Exhaust System

    C7 Corvette aFe Power MACH Force-Xp 3"-2 1/2" Axle-Back Exhaust System

    $3,143.95
    Free Shipping
    Southern Car Parts is an authorized dealer of aFe products. aFe Control designed this Stainless Steel Cat-Back Exhaust System specifically for the 2014-2017 C7 Corvette. This system will add power and a great performance sound to your C7 Corvette Stingray or Grand Sport.This cat-back exhaust system incorporates factory style NPP dual mode exhaust valves which use the factory exhaust valve motors (not included). The valves help regulate, direct and control the flow of exhaust gasses by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance.In testing, the cat-back exhaust system produced a max gain of +7 horsepower and +10 ft. lbs. of torque verified by our in house dyno Dual free-flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.The performance cat-back exhaust system is constructed of 3" mandrel-bent, 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking.The equalizer balance tube evenly distributes exhaust pulses traveling through the exhaust system. This creates a more efficient flow for better performance while minimizing exhaust drone.This MACH Force-Xp cat-back exhaust system uses factory mounting locations providing stability and a hassle-free installation. Finishing off this system are quad 4" diameter Carbon Fiber Tips. TestingIn testing, the axle-back exhaust system resulted in gains up to +7 horsepower and +10 lbs. x ft. of torque verified by our in-house dynoAggressive Sound:Dual free-flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.Exhaust Valve:This axle-back exhaust system incorporates factory style NPP dual mode & AFM (active fuel management) exhaust valves which use the factory exhaust valve motors (not included). The valves helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance.Simple Installation:This MACH Force-Xp axle-back exhaust system uses factory mounting locations providing stability and a hassle-free installation.Quad 4" Carbon Fiber Tips: Finishing off this system are quad light weight, 4” diameter, pure carbon fiber tips. The tips come with CNC-Machined laser-etched inserts, which give an aggressive yet elegant sporty look.Leak-Free Seal:High quality band clamps are used for a complete 360 degree sealing surface.Brushed 304 SS Construction:The performance axle-back exhaust system is constructed of 3" mandrel-bent, brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking.This System Fits:2014-2017 Corvette (C7) Stingray2017 Corvette (C7) Grand SportNote: Failures of original equipment AFM and NPP actuators are not covered by aFe Power® warrantyAll aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.DETAILS:Constructed from 100% hand TIG-welded, 3" to 2-1/2" mandrel bent, brushed finished 304 stainless steel tubingIncludes factory style NPP dual mode & AFM exhaust valvesUtilizes unique dual high flow, stainless steel mufflersIncludes quad 4" diameter, carbon fiber tips with CNC-machined, laser-etched insertsUses all factory hanger locations for a hassle-free installation   Application: 2014, 2015, 2016, 2017, 2018 Corvette Stingray, Grand Sport, ZO6 
  • C7 CORVETTE BILLY BOAT GEN3 FUSION EXHAUST SYSTEM SPEEDWAY TIPS FCOR-0667

    C7 Corvette Billy Boat GEN3 Fusion Exhaust System SPEEDWAY Tips

    $1,826.94
    Free Shipping
    Please note: This item is sold at our rock bottom price, the best price in the world and we cannot discount further. The Billy Boat C7 Corvette Exhaust takes the already awesome stock C7 Stingray exhaust design and improves it to a perfect blend of sound and power.  The Billy Boat Bullet is the most aggressive performance exhaust system that they manufacturer. It's one of the leading systems in the Corvette aftermarket exhaust market. The C7 Corvette Billy Boat Bullet comes in a full 3" piping system. This GEN3 Fusion system comes with dual, double wall SPEEDWAY polished stainless steel exhaust tips.  Shown with SPEEDWAY Tips below:   The Gen3 Fusion exhaust for the C7 Corvette is the result of Billy Boat's extensive development over the last six years of NPP exhaust development. We have learned a few things, and we have incorporated them in the Gen3.   * Uses the exclusive 3" butterfly valve at both the front and rear of the system. (factory is 2.5") * The 3" side is truly straight through for more volume at idle, cruising, and head turning under acceleration. * While it maintains all the modes of the C7, it turns them up a notch for true driving enjoyment.   Since 1989 Billy Boat Performance Exhaust has designed, tested, and manufactured the highest quality stainless steel exhaust systems available. Originally specializing in Porsche 911 performance exhaust systems, oil coolers, and intercoolers, B&B introduced the Tri-Flo line named after its unique 3-into-1 Porsche header. Today in its state-of-the-art facility, Billy Boat continues to develop the highest performing exhaust systems for most sports cars, trucks, and SUVs. With an in-house dyno facility and R&D staff, we stay on top of current vehicle trends and deliver products that fit and perform to an unsurpassed level of standards. Southern Car Parts was the Sponsor of the Chad Boat #84 Toyota for the Chicago race back in 2013.... We've got a great business relationship with Billy Boat Exhaust and Southern Car Parts knows the B&B Product line better than anyone in the business. We stock many C5, C6 and C7 exhaust systems. APPLICATION:  2014, 2015, 2016, 2017, 2018 C7 Corvette
  • C7 Corvette Z06 Rear Section Exhaust ATAK 11905

    C7 Corvette Z06 Rear Section Exhaust ATAK 11905

    $1,851.99
    Free Shipping
    2015-2018 Corvette Z06 6.2L AT/MT Rear Wheel Drive 2dr. with NPP dual mode exhaust.BORLA has announced the development of a revolutionary new exhaust technology that enables their engineers to deliver unprecedented vehicle-specific control over the acoustical note of an exhaust throughout the RPM range while retaining 100% of the power-adding capabilities of BORLA’s patented Multicore design.  Called ATAK (Acoustically-Tuned Applied Kinetics), this exclusive technology (U.S. patent #5,248,859) produces the highest available dB (decibel) levels in the BORLA street-legal lineup, and is designed for high-performance purists who prefer exhaust notes over their stereos. The focus of ATAK is to pump the volume while retaining clarity of sound, at the same time avoiding the drone and distortion typically found in louder exhausts. With ATAK, the sound output is tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output.  The development of each ATAK system begins with extensive study of each vehicle’s acoustical properties. The technology is based on custom-tuned attributes of the internal muffler cores, which are calibrated on a vehicle-by-vehicle basis to deliver the most desirable sound. BORLA is now shipping Cat-Back and/or Rear Section ATAK exhaust systems for a wide variety of popular applications.  Like all BORLA exhaust products, each system is handmade in the USA by master craftspeople and features premium 300-Series austenitic stainless steel construction, mandrel bending by computer-controlled CNC machinery to ensure maximum flow and a perfect fit, mirror-polished tips, and a Million-Mile Warranty. APPLICATION:  2015, 2016, 2017, 2018 C7 Z06 Corvette Part#Product TypePipe DiameterTip SizeTip DescriptionTip #Exit11905Rear Section Exhaust2.75"4.25"Dual Round Rolled Angle-Cut47Quad Center Rear Exit This system includes NPP valves. 
  • C7 Corvette aFe Power MACH Force-Xp With Axle-Back Stainless Tips

    C7 Corvette aFe Power MACH Force-Xp With Axle-Back Stainless Tips

    $2,618.95
    Free Shipping
    Southern Car Parts is an authorized dealer of aFe products. aFe Control designed this Stainless Steel Cat-Back Exhaust System specifically for the 2014-2017 C7 Corvette. This system will add power and a great performance sound to your C7 Corvette Stingray or Grand Sport.This cat-back exhaust system incorporates factory style NPP dual mode exhaust valves which use the factory exhaust valve motors (not included). The valves help regulate, direct and control the flow of exhaust gasses by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance.In testing, the cat-back exhaust system produced a max gain of +7 horsepower and +10 ft. lbs. of torque verified by our in house dyno Dual free-flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.The performance cat-back exhaust system is constructed of 3" mandrel-bent, 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking.The equalizer balance tube evenly distributes exhaust pulses traveling through the exhaust system. This creates a more efficient flow for better performance while minimizing exhaust drone.This MACH Force-Xp cat-back exhaust system uses factory mounting locations providing stability and a hassle-free installation. Finishing off this system are quad 4" diameter Carbon Fiber Tips. TestingIn testing, the axle-back exhaust system resulted in gains up to +7 horsepower and +10 lbs. x ft. of torque verified by our in-house dynoAggressive Sound:Dual free-flowing mufflers are used to absorb high pitch tones producing a powerful sound and unleashing all available horsepower and torque.Exhaust Valve:This axle-back exhaust system incorporates factory style NPP dual mode & AFM (active fuel management) exhaust valves which use the factory exhaust valve motors (not included). The valves helps regulate, direct and control the flow of exhaust gases by opening, closing, or partially obstructing passageways depending on throttle position for maximum performance.Simple Installation:This MACH Force-Xp axle-back exhaust system uses factory mounting locations providing stability and a hassle-free installation.Quad 4" Polished: Finishing off this system are quad 4" diameter, polished, 304 stainless steel tips. The tips come with a laser-etched aFe power logo for an aggressive style.Leak-Free Seal:High quality band clamps are used for a complete 360 degree sealing surface.Brushed 304 SS Construction:The performance axle-back exhaust system is constructed of 3" mandrel-bent, brushed 304 stainless steel tubing for maximum performance, corrosion resistance and strength eliminating cracking.Note: Failures of original equipment AFM and NPP actuators are not covered by aFe Power® warrantyAll aFe exhaust systems are engineered and manufactured in our Corona, California manufacturing facility.DETAILS:Constructed from 100% hand TIG-welded, 3" to 2-1/2" mandrel bent, brushed finished 304 stainless steel tubingIncludes factory style NPP dual mode & AFM exhaust valvesUtilizes unique dual high flow, stainless steel mufflersIncludes quad 4" diameter, Polished Stainless Steel tips with CNC-machined, laser-etched insertsUses all factory hanger locations for a hassle-free installation   Application: 2014, 2015, 2016, 2017, 2018 Corvette Stingray, Grand Sport, ZO6 
  • C7 Corvette Akrapovic Titanium Exhaust-Evolution

    C7 Corvette Akrapovic Titanium Exhaust-Evolution

    $5,705.41
    Free Shipping
    The Akrapovič Evolution Line system takes exhaust tuning to the next level. Featuring mufflers and link-pipes made from high-grade titanium to dramatically reduce the overall weight, the system provides more power, lowers back pressure, enhances throttle response, and increases torque. With four valves, the first pair operates in four-cylinder mode and the second set comes into action following the driver’s specifications. With an electronic device developed by Akrapovič engineers for the five standard GM modes—Weather, Eco, Tour, Sport, and Track—the system is perfectly matched to operate with the car’s drive mode selector. This produces an even greater range of options for the driver to fully experience the amazing sound of the car. The Evolution Line system, with a new X-pipe, provides even greater performance compared to the Slip-On Line system, and provides a pure race-note soundtrack for this stunning engine, with the enhanced sound characteristics of the V8 configuration and without any drone—just pure enjoyment. Four large-diameter carbon fibre tailpipes with titanium inners complete the appearance of the Evolution Line perfectly, making it stand out as something special. If the Akrapovič Evolution Line system replaces the GM NPP exhaust system, the Evolution Line maintains the valve regulation of the NPP system. If the C7 Corvette is not equipped with a GM Performance exhaust (NPP exhaust), then the Control Kit (P-HF886) and Valve Actuator Kit (P-HF868) are mandatory. For C7 Corvette s with a Performance exhaust (NPP exhaust), neither the Control Kit (P-HF886) nor the Valve Actuator Kit (P-HF868) is needed. Sound Clips Performance Graph Installation Instructions   UNIT STOCK AKRAPOVIČ MAX GAIN maximum power kW 322.6 at 5900 rpm 335.3 at 5950 rpm + 13.7 at 5750 rpm HP (m) 438.6 at 5900 rpm 455.9 at 5950 rpm + 18.6 at 5750 rpm HP (i) 432.6 at 5900 rpm 449.7 at 5950 rpm + 18.3 at 5750 rpm maximum torque Nm 583.6 at 4750 rpm 608.8 at 4650 rpm + 25.8 at 4650 rpm lb-ft 430.4 at 4750 rpm 449.0 at 4650 rpm + 19.0 at 4650 rpm weight kg 29.0 17.4 - 11.6 lb 63.9 38.4 - 25.5 %     - 40.0 static noise level dB 85.1 at 3500 rpm 94.3 at 3500 rpm 9.2 installation time min   180 measured with: Chevrolet Corvette Stingray (C7) 2014
  • C7 Z06 Corvette Billy Boat GEN3 Fusion Exhaust System SPEEDWAY Tips FCOR-0667

    C7 Z06 Corvette Billy Boat GEN3 Fusion Exhaust System SPEEDWAY Tips

    $1,819.95
    Free Shipping
    Please note: This item is sold at our rock bottom price, the best price in the world and we cannot discount further. The Billy Boat C7 Corvette Z06 Exhaust takes the already awesome stock C7 Stingray exhaust design and improves it to a perfect blend of sound and power.  The Billy Boat Bullet is the most aggressive performance exhaust system that they manufacturer. It's one of the leading systems in the Corvette aftermarket exhaust market. The C7 Corvette Billy Boat Bullet comes in a full 3" piping system. This GEN3 Fusion system comes with dual, double wall SPEEDWAY polished stainless steel exhaust tips.  Shown with SPEEDWAY Tips below:   The Gen3 Fusion exhaust for the C7 Corvette is the result of Billy Boat's extensive development over the last six years of NPP exhaust development. We have learned a few things, and we have incorporated them in the Gen3.   * Uses the exclusive 3" butterfly valve at both the front and rear of the system. (factory is 2.5") * The 3" side is truly straight through for more volume at idle, cruising, and head turning under acceleration. * While it maintains all the modes of the C7, it turns them up a notch for true driving enjoyment.   Since 1989 Billy Boat Performance Exhaust has designed, tested, and manufactured the highest quality stainless steel exhaust systems available. Originally specializing in Porsche 911 performance exhaust systems, oil coolers, and intercoolers, B&B introduced the Tri-Flo line named after its unique 3-into-1 Porsche header. Today in its state-of-the-art facility, Billy Boat continues to develop the highest performing exhaust systems for most sports cars, trucks, and SUVs. With an in-house dyno facility and R&D staff, we stay on top of current vehicle trends and deliver products that fit and perform to an unsurpassed level of standards. Southern Car Parts was the Sponsor of the Chad Boat #84 Toyota for the Chicago race back in 2013.... We've got a great business relationship with Billy Boat Exhaust and Southern Car Parts knows the B&B Product line better than anyone in the business. We stock many C5, C6 and C7 exhaust systems. APPLICATIONS: 2014, 2015, 2016, 2017, 2018 C7 CORVETTE
  • C7 Corvette Borla ATAK Rear Section Exhaust System #11881

    C7 Corvette Borla ATAK Rear Section Exhaust System #11881

    $1,254.99
    Free Shipping
    2014-2018 Chevrolet Corvette (C7) 6.2L V8 Automatic/Manual Trans Rear Wheel Drive 2dr w/o NPP dual mode exhaustThis item is used when you want to eliminate the AFM valve from your exhaust system and you don't have the NPP, dual mode exhaust option. *** BORLA®'s C7 Corvette rear section exhaust systems are covered under our Million-Mile Warranty for non-moving parts, the exhaust valves are warrantied for 3 years. Failures of original equipment AFM and NPP actuators are not covered by the Borla® warrantyC7 Corvette BORLA ATAK - The least most of the Borla Corvette Exhaust systems. If you're looking to increase the volume of your C7 Corvette Stingray exhaust, while also improving the exhaust tone and HP and Torque performance across the RPM range, then a Cat-Back exhaust is perfect for you, and there's no exhaust for your monster Chevrolet Small-Block V8 better than this new ATAK from Borla. Designed using Borla's Acoustically Tuned Applied Kinetic technology, this ATAK exhaust will provide your Corvette with a powerful and aggressive racing exhaust tone that will truly set it apart. This improved tone and increased volume don't come with any sort of compromise either--the ATAK will provide you class-leading performance gains, production quality, and minimal cabin drone! So, again, if you're looking to improve the overall driveability and enjoyment of your Corvette, look no further than this incredible ATAK Exhaust from Borla! Some C7 Corvette Borla systems use premium quality integrated valves to ensure compatibility with multi-stage driving modes or fuel-saving cylinder deactivation systems. Borla uses patented computer-controlled technologies that allow them to adjust hundreds of variables, Borla sound engineers rely on over three decades of experience to refine the acoustical properties of each muffler, compensating for the varied exhaust flow caused by the valves. Once Borla is satisfied with the "Sound of Power" throughout all rpm ranges, the system is then put into production.Part#Product TypePipe DiameterTip SizeTip DescriptionTip #Exit11881Rear Section Exhaust2.75" into muffler, dual 2.0" out.4.25"Dual Round Rolled Angle-Cut47Quad Center Rear Exit FREE GROUND SHIPPING ON THIS BORLA EXHAUST SYSTEM!APPLICATION:  2014, 2015, 2016, 2017, 2018 C7 Corvette
  • C7 Corvette Corsa Exhaust Extreme Quad 4.5'' Tips 14762

    C7 Corvette Corsa Exhaust Extreme Quad 4.5'' Tips 14762

    $1,645.00
    Free Shipping
    Improve the Performance and Sound of your new 2014-2018 C7 Corvette Stingray with the new Corsa Performance Exhaust System! Loud aggressive sound for the real High Performance enthusiast! This system is louder than the Sport system. No Drone Unwanted, low frequency sound waves are diverted through specifically designed channels and are reversed 180 degrees. Point of Cancellation Our patented technology is engineered to target and eliminate unwanted frequencies that cause interior resonance and drone. Performance of Sound Acoustic tuning creates an aggressive sound under acceleration that is styled to match the personality of your vehicle. Maximized HP and TQ A straight-through, unrestricted design reduces back pressure; increasing engine efficiency, horsepower and torque. *Material: 100% Stainless Steel  *Tip Finish: High Polished  *Fitment: 2014 / 6.2L V8 / LT1  *Transmission Fitment: AUTO OR MANUAL  *Tubing O.D. Size: 2.75in.  *System Type: Valve-Back  *TIP Quantity: 4  *Quad Rear Exit FREE GROUND SHIPPING ON THIS PRODUCT!
  • C7 Corvette Borla ATAK Exhaust System 11856

    C7 Corvette Borla ATAK Exhaust System 11856

    $2,227.99
    Free Shipping
    Round Intercooled Tips #11856 Southern Car Parts is your leader in C7 Corvette Borla Exhaust Systems! The C7 Corvette BORLA ATAK exhaust is the more agressive sounding (more agressive than the Borla Sport system) 100% stainless exhaust system for your C7 Corvette. If you're looking to increase the exhaust note volume of your C7 Corvette Stingray, while also improving the exhaust tone, HP, and Torque performance across the RPM range, then a Borla Cat-Back exhaust is perfect for you. There is no exhaust better for your monster Chevrolet LS Small-Block V8 better than this new ATAK from Borla. Designed using Borla's Acoustically Tuned Applied Kinetic technology, this ATAK exhaust system will provide your C7 Corvette with a powerful and aggressive racing exhaust tone that will make it so much more fun to drive. The improved exhaust tone and increased volume doesn't come with any power compromises either. Most customers see a 5-7hp performance boost with a free flowing Borla C7 exhaust. The Borla Corvette ATAK will make your stereo obsolete as you will just enjoy listening to the exhaust. There is very minimal to no cabin drone with the Borla ATAK system. So, again, if you're looking to improve the over-all drivability and enjoyment of your C7 Corvette Stingray look no further than this incredible ATAK Exhaust from Borla!             Some C7 Corvette Borla systems use premium quality intregrated valves to ensure compatibility with multi-stage driving modes or fuel-saving cylinder deactivation systems. Borla uses patented computer-controlled technologies that allow them to adjust hundreds of variables, Borla sound engineers rely on over three decades of experience to refine the acoustical properties of each muffler, compensating for the varied exhaust flow caused by the valves. Once Borla is satisfied with the "Sound of Power" throughout all rpm ranges, the system is then put into production.     FREE GROUND SHIPPING ON THIS BORLA EXHAUST SYSTEM!APPLICATION:  2014, 2015, 2016, 2017, 2018 C7 Corvette
  • C7 Corvette Exhaust Corsa Extreme Valve-Back Performance Exhaust System Black Poly Tip 14763Blk

    C7 Corvette Exhaust Corsa Extreme Valve-Back Performance Exhaust System Black Poly Tip 14763Blk

    $1,918.00
    Free Shipping
    CORSA's new C7 Corvette exhaust from Southern Car parts Fits NPP and Non-NPP Valve-back muffler systems and attaches behind the factory GM valves. Corsa exhausts from Southern Car Parts feature straight through designs, different sound levels, and most systems come with different tip options such as the black stealth tips and Polished double wall tips. CORSA RSC™ XTREME systems are Corsa's newest systems which are the loudest most aggressive systems Corsa offers. XTREME systems feature a deep growl at idle, bold during acceleration, and screams at high RPMs and still no drone at Cruise. CORSA RSC™ SPORT exhaust system is Corsa's Mid-Level Sounding exhaust and is best described as producing a bolder sound most evident between 3000 – 5000 RPM WOT. Corsa Sport Exhausts are characterized by High performance sound a distinct rumble at idle and aggressive sound through the gears but still no drone during cruising. CORSA RSC™ TOURING exhaust system is Corsa's Quietest System and responds with a more reserved, deep, V-8 sound, yet throaty under acceleration. The Touring Exhaust is characterized with a slightly louder then stock exhaust tone, quiet at idle and no droning at cruise. CORSA straight-through design coupled with RSC™ noise cancellation technology allows us to tune out the undesirable low frequencies that cause droning, while reducing back pressure. A reduction in back pressure allows the engine to produce more horsepower and torque. CORSA uses its patented Reflective Sound Cancellation™ (RSC™) technology to eliminate low frequency resonance while minimizing backpressure. Sound waves are reflected within the muffler case, producing a cancellation wave effect, with no flow restriction and without electronic devices.Corsa Exhausts Feature: No Resonance / Drone - due to noise cancellation technology – RSC is whisper quiet at highway speeds Great Performance Sound - we tune in the good sounds and cancel the bad without the use of baffles or wool packing material Increased Horsepower & Torque - due to straight-through design = increased flow and less backpressure There is no drone with the CORSA exhaust system because the CORSA exhaust system uses RSC technology to eliminate problem frequencies that cause interior drone/resonance at cruising speeds. CORSA's Chevrolet Corvette exhaust system features a patented non-restrictive Straight-through design reduces back pressure and frees up additional power resulting in improved horsepower and torque. As an additional bonus, your Chevrolet Corvette can result in greater fuel economy because of less back pressure and more power. Corsa Exhausts feature 304 Stainless construction throughout and are made in the USA. Corsa dB Series exhausts are their lower cost alternatives for trucks that feature mixed materials for construction and single wall tips depending on application. Please note there are 4 different sound levels available. Touring, Sport, Extreme and non-designated default systems where there is only one sound level. Xtreme - their loudest offering for those who want the loudest badest sounding system out their with an aggressive tone, CORSA's Sport systems for their mid sound level is a great alternative for customers who want an aggressive sounding unique exhaust but who do not necessarily want to hear it all the time. The sport option is a good option for mildly modified vehicles and for comfortable highway cruising, CORSA's Touring exhaust is their quietest system for those with highly modified engines or those who wish to only have a slightly louder tone then stock. If there is no designation on sound level (DB etc..) in the part name then the sound level is somewhere between a Sport and a Touring system.  
  • C7 Corvette Borla ATAK Rear Section Exhaust System #11863

    C7 Corvette Borla ATAK Rear Section Exhaust System #11863

    $1,730.99
    Free Shipping
    C7 Corvette BORLA ATAK - The least most of the Borla Corvette Exhaust systems. If you're looking to increase the volume of your C7 Corvette Stingray exhaust, while also improving the exhaust tone and HP and Torque performance across the RPM range, than a Cat-Back exhaust is perfect for you, and there's no exhaust for your monster Chevrolet  Small-Block V8 better than this new ATAK from Borla. Designed using Borla's Acoustically Tuned Applied Kinetic technology, this ATAK exhaust will provide your Corvette with a powerful and aggressive racing exhaust tone that will truly set it apart. This improved tone and increased volume doesn't come with any sort of compromise either--the ATAK will provide you class-leading performance gains, production quality, and minimal cabin drone! So, again, if you're looking to improve the over-all drivability and enjoyment of your Corvette Z06 or ZR1, look no further than this incredible ATAK Exhaust from Borla! This system retains the two front valves in factory system.   Part# Product Type Pipe Diameter Tip Size Tip Description Tip # Exit 11863 Rear Section Exhaust 2.75' into muffler dual 2.0" out 4.25" Dual Round Rolled Angle-Cut Intercooled 19 Quad Center Rear Exit   Some C7 Corvette Borla systems use premium quality intregrated valves to ensure compatibility with multi-stage driving modes or fuel-saving cylinder deactivation systems. Borla uses patented computer-controlled technologies that allow them to adjust hundreds of variables, Borla sound engineers rely on over three decades of experience to refine the acoustical properties of each muffler, compensating for the varied exhaust flow caused by the valves. Once Borla is satisfied with the "Sound of Power" throughout all rpm ranges, the system is then put into production.     FREE GROUND SHIPPING ON THIS BORLA EXHAUST SYSTEM!APPLICATIONS: 2014, 2015, 2016, 2017, 2018 C7 CORVETTE
  • C7 Corvette Z06 Akrapovic Titanium Exhaust-Axle Back

    C7 Corvette Z06 Akrapovic Titanium Exhaust-Axle Back

    $4,099.00
    Free Shipping
    The Akrapovič Slip-On Line system is the first step in exhaust tuning. Crafted from high-grade titanium, which considerably reduces the weight in comparison to the stock system, it has been perfectly designed to fit directly onto the existing link pipes. The system increases power, provides better throttle response, and improves torque, and also conjures up an amazing sound from the naturally-aspirated V8 engine. The Slip-On Line system has two valves. The system maintains the valve regulation of the NPP (Performance exhaust) system and is developed to be compatible with the car’s drive mode selector, and Akrapovič engineers have developed an electronic device to drive the exhaust valves for each mode—Weather, Eco, Tour, Sport, and Track—giving the driver an even greater opportunity to enjoy the sound of the Akrapovič Slip-On Line across the whole spectrum of the car’s performance. It’s topped off by four large-diameter carbon fiber tailpipes with titanium inner, to make the Slip-On clearly recognizable as an exhaust that means business. Sound Clips Performance Graph
  • C7 Corvette Magnaflow Exhaust System Street Series 15225

    C7 Corvette Magnaflow Exhaust System Street Series 15225

    $2,778.43
    Free Shipping
    MagnaFlow's C7 Corvette Performance Exhaust systems are rugged, reliable, built to last, and their legendary straight-through, wide-open, stainless steel mufflers provide the smooth, deep tone they are famous for. These exhaust kits and cat-back systems feature mandrel bends to ensure there are no flow restrictions and OEM-style barbed hangers for easy installation. All of MagnaFlow's exhaust systems are factory-checked for proper fit and dyno-tested to verify performance gains. All necessary installation hardware is included and the entire system is backed by MagnaFlow's lifetime warranty. Made in the USA and engineered to last, for those seeking increased performance and better economy, MagnaFlow Street Series Performance Exhaust systems deliver the smooth deep sound you want and the wide-open performance power you need. Our exhaust systems feature straight-through flow designs for the ultimate in unrestricted horsepower and torque for big power while maintaining exhaust efficiency. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards. •Made in the U.S.A. •All Mandrel Bent Tubing •409 Stainless Steel Construction •Lifetime Warranty
  • C7 Corvette ZO6 Rear Section Exhaust ATAK 11903

    C7 Corvette ZO6 Rear Section Exhaust ATAK 11903

    $1,792.99
    Free Shipping
    2015-2018 C7 Corvette ZO6 6.2L AT/MT Rear Wheel Drive 2dr. with NPP dual mode exhaust.BORLA has announced the development of a revolutionary new exhaust technology that enables their engineers to deliver unprecedented vehicle-specific control over the acoustical note of an exhaust throughout the RPM range while retaining 100 of the power-adding capabilities of BORLA patented Multicore design.  Called ATAK (Acoustically-Tuned Applied Kinetics), this exclusive technology (U.S. patent #5,248,859) produces the highest available dB (decibel) levels in the BORLA street-legal lineup and is designed for high-performance purists who prefer exhaust notes over their stereos. The focus of ATAK is to pump the volume while retaining clarity of sound, at the same time avoiding the drone and distortion typically found in louder exhausts. With ATAK, the sound output is tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output.  The development of each ATAK system begins with extensive study of each vehicle’s acoustical properties. The technology is based on custom-tuned attributes of the internal muffler cores, which are calibrated on a vehicle-by-vehicle basis to deliver the most desirable sound. BORLA is now shipping Cat-Back and/or Rear Section ATAK exhaust systems for a wide variety of popular applications.  Like all BORLA exhaust products, each system is handmade in the USA by master craftspeople and features premium 300-Series austenitic stainless steel construction, mandrel bending by computer-controlled CNC machinery to ensure maximum flow and a perfect fit, mirror-polished tips, and a Million-Mile Warranty. APPLICATION:  2014, 2015, 2016, 2017, 2018 C7 Corvette Part#Product TypePipe DiameterTip SizeTip DescriptionTip #Exit11903Rear Section Exhaust2.75"4.25"Dual Round Rolled Angle-Cut Intercooled19Quad Center Rear Exit    This system includes NPP valves. 
  • C7 Corvette ZO6 Akrapovic Evolution Titanium Exhaust System S-CO/TI/2

    C7 Corvette ZO6 Akrapovic Evolution Titanium Exhaust System S-CO/TI/2

    $5,345.00
    Free Shipping
    If you are driving a C7 ZO6 and you want simply the best exhaust system made for your car then you want an Akrapovic Evolution Titanium Exhaust System. For sound and power, nothing else compares to it. The Akrapovič Evolution Line system takes exhaust tuning to the next level. Featuring mufflers and link-pipes made from high-grade titanium to dramatically reduce the overall weight, the system provides more power, lowers back pressure, enhances throttle response, and increases torque. The Slip-On Line system has two valves. The system maintains the valve regulation of the NPP (Performance exhaust) system. With an electronic device developed by Akrapovič engineers for the five standard GM modes—Weather, Eco, Tour, Sport, and Track—the system is perfectly matched to operate with the car’s drive mode selector. This produces an even greater range of options for the driver to fully experience the amazing sound of the car. The Evolution Line system, with a new X-pipe, provides even greater performance compared to the Slip-On Line system, and provides a pure race-note soundtrack for this stunning engine, with the enhanced sound characteristics of the V8 configuration and without any drone—just pure enjoyment. Four large-diameter carbon fiber tailpipes with titanium inners complete the appearance of the Evolution Line perfectly, making it stand out as something special Sound Clips Performance Graph
  • C7 Corvette Borla S-Type Exhaust System 11862

    C7 Corvette Borla S-Type Exhaust System 11862

    $1,838.99
    Free Shipping
    Southern Car Parts is your leader in C7 Corvette Borla Exhaust Systems! S-Type Style - The mid range of the Borla Corvette Exhaust systems. This is not as aggessive as the ATAK and more aggressive than the Touring. BORLA Cat-Back exhausts feature patented, straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy and the distinctive BORLA Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium austenitic stainless steel, superior to T-400 series knockoffs, to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. Best of all, BORLA stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.  Some C7 Corvette Borla systems use premium quality intregrated valves to ensure compatibility with multi-stage driving modes or fuel-saving cylinder deactivation systems. Borla uses patented computer-controlled technologies that allow them to adjust hundreds of variables, Borla sound engineers rely on over three decades of experience to refine the acoustical properties of each muffler, compensating for the varied exhaust flow caused by the valves. Once Borla is satisfied with the "Sound of Power" throughout all rpm ranges, the system is then put into production.     FREE GROUND SHIPPING ON THIS BORLA EXHAUST SYSTEM!APPLICATION:  2014, 2015, 2016, 2017, 2018 C7 Corvette
  • C7 Corvette  Z06 Corsa Xtreme Axleback System with Quad 4.5" Polished Pro-Series Tips 14766

    C7 Corvette Z06 Corsa Xtreme Axleback System with Quad 4.5" Polished Pro-Series Tips 14766

    $1,909.00
    Free Shipping
    Fits/Applications:                                                                              2015-2018 Chevrolet C7 Corvette Z06, Coupe, Manual, 6.2L V8 2015-2018 Chevrolet C7 Corvette Z06, Coupe, Auto, 6.2L V8 2015-2018 Chevrolet C7 Corvette Z06, Convertible, Auto, 6.2L V8 2015-2018 Chevrolet C7 Corvette Z06, Convertible, Manual, 6.2L V8 Tips: Dual Rear Exit, Quad 4.5", Polished Pro-Series    Sound: Xtreme Technology: CORSA's Patented RSC® Technology is designed for an AGGRESSIVE SOUND under acceleration and a DRONE-FREE EXPERIENCE during cruise. Every system is engineered specifically to each vehicle without drone while cruising.    

1-48 of 49

Page:
  1. 1
  2. 2

Grid List

Set Descending Direction

We supply dozens of outstanding exhaust parts and accessories for 2014-2018 Corvette models. Plus, our C7 Corvette exhaust systems come from globally recognized automotive parts suppliers like Akrapovic, Borla, Corsa and many others for unbeatable quality.

Enjoy Superior C7 Exhaust System Products from Southern Car Parts

Southern Car Parts is a one-stop shop for all of your 2014-2018 Corvette needs, and we offer a broad array of top-grade C7 exhaust system products every day.

Our C7 Corvette exhaust system parts and accessories deliver the ideal combination of style and function. They consist of state-of-the-art materials and are built by industry-leading manufacturers. This means all of our Corvette C7 exhaust system will continuously keep you satisfied for years to come.

In addition, our products are backed by our friendly, professionally trained automotive specialists. The Southern Car Parts team understands only the best C7 exhaust system products will suffice for your 2014-2018 Corvette. As such, we provide expert assistance and will respond to your concerns and queries at any time.

Our automotive specialists will listen to your questions and provide honest, unbiased recommendations. As a result, you should have no trouble finding Corvette C7 exhaust system products that are easy to install and will complement your 2014-2018 Corvette perfectly.

S-type.

C7 Corvette Z06 Borla Atak Exhaust System

Let's not forget about our best-in-class pricing on Corvette C7 exhaust system parts and accessories, either. We strive to provide amazing exhaust systems at affordable prices. That way, you won't have to worry about spending too much to upgrade your vehicle.

Get the C7 Corvette Exhaust System Products You Need from Southern Car Parts

When it comes to C7 Corvette exhaust system products, Southern Car Parts is in a class all its own. We supply both popular and tough-to-find products, ensuring you can discover the best exhaust parts and accessories for your 2014-2018 Corvette.

Ready to get the best results from your C7 Corvette? Browse our C7 Corvette exhaust system parts and accessories today, and you can move one step closer to boosting your C7 Corvette's performance.

 

C7 Corvette Exhaust Systems

Minimal Price: $ 89.95 89.95