C7 Corvette Air Intakes/Filters


C7 Corvette Air Intakes/Filters

2014-2019 C7 Corvette Cold Air Intakes

 Cold Air Inductions from Halltech, Airaid, aFe Power, K&N, Green and More - All for the C7 Corvette!

At Southern Car Parts, we deal in aftermarket products- almost everything that you will need to maintain your Corvette. From cold air intakes, battery tenders, chargers to interior parts, we have everything to keep your C7 Corvette stylish and in its best form for years to come. We proudly flaunt our vast collection of replacement parts, add-on accessories and modifiers for Corvettes, Raptors, Mustangs and many more cars. We believe in 100% customer satisfaction and walk an extra mile to provide our customers with high-quality products that are affordably priced to fit in all budgets. We make sure that with a low price tag, our goods don’t lack behind in terms of quality. So you can absolutely rely upon us.

21 Item(s)

Grid List

Set Descending Direction
  • AirCharger Highโ€‘Flow Intake Kit K&N 63โ€‘3090 63 Series

    AirCharger Highโ€‘Flow Intake Kit K&N 63โ€‘3090 63 Series

    $699.99
      The K&N AirCharger High-Performance Intake (63 Series) is a sister product to our the K&N Series FIPK (57 Series). The K&N AirCharger High-Performance Intakes are built for many different vehicles and represent a dramatic improvement over a K&N O/E replacement filter alone; they use only non-metallic rotationally molded tubes that can reduce intake air temperature and decrease intake sound over a metal tube. Restriction can exist BETWEEN an air filter and the engine reducing the benefit of a K&N Air Filter. The weakest link in the airflow “chain” robs a vehicle of its natural horsepower. Often that weak point is the factory air path leading to the Engine. K&N Air Intake Kits virtually eliminate air path restriction by replacing the air filter and the entire air path to the engine. The aerodynamically engineered tube drives a massive amount of air into an engine, which translates into POWER. The K&N AirCharger High-Performance Intake are truly state-of-the-art. Starting with the largest conical shaped High-Flow air filter that can fit into the engine compartment while using factory holes and mounting points. This extra filter size provides even more airflow at lower restriction than a standard K&N O/E replacement filter that is limited to the size of the factory air box. The oversize air filter also captures and holds more dirt increasing the service life before a cleaning is required (up to 100,000 miles). The filter is isolated from high engine temperature by a heat shield designed to lower the temperature of the air entering the engine, which increases horsepower. Next, we attach the filter to a rotationally molded tube made from interlaced High-Density Polyethylene. This process allows us to precisely shape the tube to reduce turbulence and accelerate airflow into the engine. This is why some of K&N's tubes have unique shapes or indentations that are specifically engineered for each application. Finally, the tube is connected to the engine with adapters made from high strength materials such as silicon and reinforced nylon and ensures long life. Put all this together and you have the best high-flow intake system available today. FEATURES * Guaranteed to Provide more HP and Increased Acceleration * Engineered to Specific Vehicle Design * Easy to Install, Usually in 90 minutes or less! * Lasts up to 100,000 Miles Before Service is Required (depending on driving conditions) * Million Mile Limited Warranty * Replaces OEM Filter and Air Box * Air Filter is Washable and Reusable * Works with Original Equipment Manufacturer Computer Systems * Designed to use Factory Holes & Mounting Points Whenever Possible * Street Legal in Most States (not street legal in CA)   Application: 2015, 2016, 2017, 2018, 2019 C7 Z06 Corvette
  • 2014-2019 C7 Corvette K&N 99-0621 Filter Cleaner

    2014-2019 C7 Corvette K&N 99-0621 Filter Cleaner

    $17.99
    K&N part 99-0621 is a 32 ounce pump spray bottle of Power Kleen Air Filter Cleaner. K&N Power Kleen is the only cleaner recommended to clean K&N cotton air filter elements. K&N 99-0621 Air Filter Cleaner will loosen and remove built up dirt and grime from your K&N oiled cotton air filter so it can be washed clean with water. It is so good at cleaning greasy dirt and grime that it is also used as an industrial strength degreaser. After your K&N air filter dries re-oil it with K&N air filter oil (sold separately). Product Specifications Product Box Height 11.75 in (298 mm) Product Box Length 3.25 in (83 mm) Product Box Width 3.25 in (83 mm) Product Style Accessories Weight 2.4 lb (1.1 kg)Applications: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette
  • 2014-2017 C7 Corvette aFe POWER Magnum FLOW Pro DRY S Air Filter

    2014-2019 C7 Corvette aFe POWER Magnum FLOW Pro DRY S Air Filter

    $108.99
    Free Shipping
    Adding more power to your C7 Corvette while saving money is something that everyone wants. This aFe air filter is reuseable so you will never have to buy another air filter for your car. Because it flows 42% more air than stock you will make more power as well. aFe POWER was built on superior air filter construction and flow, and for those looking for a simple upgrade to the Corvette 6.2L, these drop-in OE air filter replacements fit the bill. For those looking for additional convenience, we also offer the oil-free Pro DRY S filter which does not require oiling. Constructed with 100% polyurethane on this unique oval cylinder design, this high-flow, non-oiled OE replacement performance filter has outflowed the stock filter by up to 42% for improved horsepower and torque. The Pro DRY S air filter uses three layers of progressively finer mesh cotton gauze media to provide maximum airflow for best performance results. Open evenly spaced pleats provide excellent dust holding capacity for a longer service cycle between cleanings. An integrated urethane bump seal ensures a tight, no leak seal over the life of the filter. Pro DRY S Media: This filter features 3-layers of progressive media to provide maximum flow with excellent filtration. The progressive layering of media allows the filter to flow at high levels even when dirty. The Pro DRY S non-oiled synthetic air filter requires no oils for cleaning for maximum convenience. Rounded Open Pleats: aFe performance air filters use a rounded pleat design, which produces more useable filter surface area for increased flow and greater dust holding capacity. Progressive Bump Seal: This pliable sealing surface conforms to even the most uneven filter housing. This design eliminates the use of gaskets or sealants. The soft urethane construction always goes back to its original form so you will never compress the bump seal. This makes for a perfect filter fit and sealing surface every time. Full Urethane Framed Construction:aFe Power performance air filters are constructed using full 360-degree urethane frames. This construction is very rigid and allows for a proper OE style fit with excellent filter strength. aFe Power OE replacement performance filters have a limited lifetime warranty. Application: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette
  • 2014-2019 C7 Corvette Soler Performance 87mm Throttle Body

    2014-2019 C7 Corvette Soler Performance 87mm Throttle Body

    $435.00
    Free Shipping
    Increase the performance in your 2014-2019 C7 Corvette Stingray/GS/Z51 with a Soler Performance Premium Throttle Body!FEATURES: โ€ข Optimized Active Contours (Both Upstream & Downstream) โ€ข Porting Taper and Upstream Bore (Lip & Bore Reduction) โ€ข Greater Discharge Coefficient of Plate/Blade โ€ข 16 Ra Microinch, Diamond Polished Surface Finish (Lower Skin Friction) โ€ข Half-Shaft (Front & Back) for Larger WOT Flow Area (91 mm Effective Bore) โ€ข Self-Cleaning Throat/Flow Gap โ€ข Minimized Gear Backlash โ€ข Countersunk, Thread-locked, and Peened Screws โ€ข Higher Quality โ€ข Made from Brand New OEM Parts โ€ข Lower weight to power ratio at part throttle, for a more nimble/spirited driving experience (We doubled the rate of change of mass airflow (MAF) from 1.2 g/s-deg to 2.4 g/s-deg), 100% Increase! โ€ข Linearization and smoothing of the curve for a more predictable response and crisper shifts โ€ข Immediate response right off idling while keeping idling function undisturbed (No Hesitation/Stumble) โ€ข Does not require tuning. Warranty safe. โ€ข More air/power at every single throttle position after idle. Crucial for starting or expanding power gain modifications โ€ข Easy Installation (15 Minutes or Less )Application 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette Stingray/GS/Z51
  • 2014-2019 C7 Corvette Stingray aFe Momentum Cold Air Intake System 52-74201

    2014-2019 C7 Corvette Stingray aFe Momentum Cold Air Intake System 51-74201

    $472.00
    Free Shipping
    aFe is proud to introduce the all-new Momentum sealed intake system for the 2014-2019 Chevrolet Corvette (C7) with the V8-6.2L engine. This all-new Momentum intake system resulted in 18 horsepower and 22 lbs. x ft. torque and outflows the factory intake by 42%. This system is superior in every way, from the one-piece sealed housing to the massive air filter, roto-molded tube w/ built-in resonance chamber and premium hardware. This system uses a CAD designed, dyno-tuned, roto-molded intake tube & housing to achieve maximum power gains while maintaining a perfect fit. This is a direct bolt-on kit and requires no cutting or drilling on OEM parts. Unique One-Piece Housing w/ Sight Window:A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene and mounts directly into the factory location on the fender well to capture the coolest air available from the factory intake tract. Roto-molded Tube:This system uses a CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. This tube has a built-in resonance chamber to catch un-wanted air intake noises.  Massive Cone Air Filter:This Momentum intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive 7" oval flange and is 9-1/2" tall Pro DRY S filter media. The Pro DRY S performance air filter features 3-layers of progressively finer mesh synthetic "oil-free" media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. Premium Hardware:Premium stainless steel T-bolt clamps and a reinforced silicone hump coupler are used for strength and durability while also providing the most secure installation available. Application: 2014, 2015, 2016, 2017, 2018, 2019 Corvette
  • 2014-2019 C7 Corvette Z06 Injen Evolution Intake EVO7201

    2014-2019 C7 Corvette Z06 Injen Evolution Intake EVO7201

    $379.95
    Free Shipping
    Give your C7 Z06 a performance edge with this 2014-2019 C7 Corvette Z06 Injen Evolution Intake EVO7201. Injen’s all-new Evolution series sealed cold air intake system for the 2015-2019 Chevrolet Corvette Z06 is unmatched in the aftermarket. The EVO7201 is a sleek intake kit that practically drops-in by itself and provides unparalleled looks under your hood. This intake system also includes the revolutionary Injen Filter Monitor for quick and easy filter inspections. The EVO7201 housing encloses an Injen SuperNano-Web dry air filter to provide killer air flow, added performance, and outstanding engine protection. The EVO7201 comes with all necessary hardware to provide a simple and fast installation. *Features and benefits of Injen's EVOLUTION air induction systems: * * Dyno tuned as a System for GUARANTEED safe horsepower and torque gains * Officially the largest SuperNano-Web dry filter on the market * The first stand-alone air filter chamber for ample on-demand air supply * Sleek and sexy design lines for unmatched looks under your hood * The first built-in filter minder for quick, easy and accurate filter inspection * Designed and built in the USA from cross-linked polyethylene for outstanding durability and heat insulation * Durable stainless steel hardware and automotive grade hose couplers included * The perfect OE fitment; just drop into the original mounting points, fasten clamps, and drive away! * All Injen intake systems are designed and manufactured with pride in the USA Applications: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette Stingray, Z06, Grand Sport
  • C7 Corvette Vararam Cold Air Intake System VR-TCR-7

    2014-2019 C7 Corvette Vararam Cold Air Intake System VR-TCR-7

    $361.99
    Free Shipping
    If you are looking to increase to the performance of your C7 by adding an aftermarket air intake look no further than this new vararam intake. This precision injected intake has an amazing finish that looks like it is factory installed. This intake also features a true cold air induction that pulls cooler outside air from a high-pressure zone that gains added power without needing to cut up your Corvette. This intake also features same intake tube design as the COPO race program used for increased airflow. Installation takes only a few minutes with just a few simple hand tools. This intake also includes a green high-performance air filter that is washable and reusable so you will never have to purchase another air filter again. Veraram helped design this filter years ago for maximum power and increased performance. This new C7 Corvette intake has two features not found on any other air intake. The first feature is the reverse venturi intake tube. By expanding the intake to it helps pull the slow-moving air off of the side of the intake and speeds it up causing more air to be fed into your engine providing additional horsepower. The second is the auxiliary air inlet. This inlet draws cooler outside air from a high-pressure zone and will drop the intake air temperature in seconds to ambient air temperature for increased horsepower. Other intakes can take miles of driving before they cool down if they ever cool down. This new intake will provide an 18-20 hp increase without tuning and even more power if you retune your Corvette. This intake is truly one of the highest performing and best-designed intakes on the market today and is sure to give your C7 Corvette a noticeable boost in performance. Veraram has been designing and building high-performance intakes for Corvettes since the late-90s. They have a proven track record of designing and building the most powerful intake systems on the market today. With their new intake C7 the VR-TCR-7 they bring decades of experience to the new C7 Corvette. TCR-7 Features:Precision Injection and Rotational Molded construction for unprecedented quality.Pulls additional airflow from a High-Pressure zone dropping heat soak temps in seconds, NOT miles like our competition. Gains of 1.2 – 4 % more power from Cold Air alone! No need to spend moneyNo tuning required. You can custom tune for more power.Straight from the COPO Race program, Our Patented Reverse Venturi Intake Tube with throttle body Bell-Mouth for added flow. The result, flow is increased beyond having no intake at all!Quick and Easy Installation. No cutting or drilling on your car.Application: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette Stingray, Grand Sport  Proper Heat shielding:Dramatically delays heat penetration. Proper Mold Quality:ISO 9001 compliant manufacturing.Smooth internally, near even plastic flow. Maintains mold thickness Requirements for strength and minimizing heat penetration.Heat shielding?The material did not stop heat soak during our real-world testing.As you can see, its “OPEN” it can’t Poor mold quality:Moisture in the plastic.Makes for a thin, flimsy, weak part. This also allows heat to penetrate quicker.The differences are very clear! The VR Reverse Venturi tube is the product of hours of CFD, Flow-bench and Racing development. With expanding walls that can reach a massive 5.0 inches in ID combined with a gentle sweep angle and decreasing radius air horn to increase flow into the engine beyond vacuum alone. This combination flows far more volume while maintaining the velocity of a smaller tube. This competitor uses a standard ID bore that is “SMALLER” than factory and an “off the shelf ” 90 deg bend. Even GM didn’t do that! 
  • 2014-2019 C7 Corvette K&N HP-1017 Oil Filter

    2014-2019 C7 Corvette K&N HP-1017 Oil Filter

    $17.49
    Originally developed for demanding race applications, K&N's Premium Wrench-Off Oil Filter has become a favorite among consumers for its durability and easy removal. Most of our automotive and marine oil filters come with a 1” nut welded to the top of the canister so they can be easily wrenched-off with a standard tool. To satisfy the demands of racers, our oil filter has many features over and above the requirements of most vehicles. We use thicker canister walls for extra strength and durability which reduces the risk of damage from loose rocks and debris. The drilled hole on the nut provides for safety wire attachment. Our oil filters also use a resin impregnated cellulose filter media. This allows for higher flow rates while providing outstanding filtration. O/E replacement oil filters for most cars, trucks, SUV's, motorcycles, & ATV's Resin-impregnated filter media traps 99% of harmful contaminants 1 In. exposed nut designed for easy oil filter removal Heavy duty construction for extreme conditions Anti-drainback valve (where applicable) eliminates dry starts, prevents oil from draining back into crankcase during engine shutdownProduct Specifications Anti Drain Back Valve Yes Bypass Valve Yes Filter Material High Flow Premium Media Gasket Material Nitrile Rubber Height 3.75 in (95 mm) Outside Diameter 3 in (76 mm) Product Box Height 4.06 in (103 mm) Product Box Length 3.16 in (80 mm) Product Box Width 3.16 in (80 mm) Product Style Oil Filters PSI Relief Valve 11-17 Removal Nut Yes Removal Nut Size 1 inch Style Canister Thread Specification M22 x 1.5 Weight 0.8 lb (0.4 kg)Applications: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette
  • 2016-2019 Camaro 6 SS Soler Performance 87mm Throttle Body

    2016-2023 Camaro 6 SS Soler Performance 87mm Throttle Body

    $435.00
    Free Shipping
    This Soler Performance Premium Throttle Body comes with easy to understand instructions for a 15 minute or less install!FEATURES: โ€ข Optimized Active Contours (Both Upstream & Downstream) โ€ข Porting Taper and Upstream Bore (Lip & Bore Reduction) โ€ข Greater Discharge Coefficient of Plate/Blade โ€ข 16 Ra Microinch, Diamond Polished Surface Finish (Lower Skin Friction) โ€ข Half-Shaft (Front & Back) for Larger WOT Flow Area (91 mm Effective Bore) โ€ข Self-Cleaning Throat/Flow Gap โ€ข Minimized Gear Backlash โ€ข Countersunk, Thread-locked, and Peened Screws โ€ข Higher Quality โ€ข Made from Brand New OEM Parts โ€ข Lower weight to power ratio at part throttle, for a more nimble/spirited driving experience (We doubled the rate of change of mass airflow (MAF) from 1.2 g/s-deg to 2.4 g/s-deg), 100% Increase! โ€ข Linearization and smoothing of the curve for a more predictable response and crisper shifts โ€ข Immediate response right off idling while keeping idling function undisturbed (No Hesitation/Stumble) โ€ข Does not require tuning. Warranty safe. โ€ข More air/power at every single throttle position after idle. Crucial for starting or expanding power gain modifications โ€ข Easy Installation (15 Minutes or Less )Application 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 Camaro 6 SS
  • C7 Corvette aFe POWER Momentum Cold Air Intake System Carbon Fiber 52-74201-C

    2014-2019 C7 Corvette aFe POWER Momentum Cold Air Intake System Carbon Fiber

    $1,476.00
    Free Shipping
    The C7 Corvette is one amazingly quick and powerful car directly from the factory. However if you are one of those people who are always looking for more power then you need to check out this aFe cold air intake system. Unique Computer Design Carbon Fiber Housing W/ Sight Window: The simple yet elegant design of the one-piece sealed housing makes installation a snap and features our patent pending filter-to-housing interface. A large clear sight window allows for filter inspection without removal of the air box. The housing is made out of lightweight high gloss, clear-coated plain weave carbon fiber and mounts directly into the factory location on the fender well to capture the coolest air available from the factory intake tract. Dyno-Tuned Carbon Fiber Intake Tube: Lightweight high gloss clear-coated plain weave carbon fiber tube to achieve maximum power gains while maintaining a perfect fit. One billet aluminum fitting is mounted on the tube to provide a perfect connection with the factory vacuum line. Large 3-Layer "Oil-Free" Performance Air Filter: This Momentum intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive 7" oval flange and is 8-1/2" tall Pro DRY S filter media. The Pro DRY S performance air filter features 3-layers of progressively finer mesh synthetic "oil-free" media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. Large 5-Layer Performance Air Filter: This Momentum intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive 7" oval flange and is 8-1/2" tall Pro 5R filter media. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. Black Series Momentum Air Intake System: Also included in the kit is a Black Series serialized plate to assure the authenticity of the intake. Premium Hardware:  Premium stainless steel T-bolt clamps and a silicone hump coupler are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation. Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles. DETAILS:+18 HP / +22 lbs. x ft. Torque max gains (vehicle tested with Pro 5R air filter media) Outflows factory intake by 42% (with Pro 5R oiled air filter media) 40% lighter than OE kit (6.61 lbs. for OE and 4 lbs. for aFe) Lightweight high gloss, clear-coated plain weave carbon fiber housing and tube Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly Unique (Patent Pending) Filter-to-Housing Interface for Easy Installation Includes both Pro DRY S oil-free & Pro 5R oiled, washable/reusable performance air filters Serialized Black Series plate for authenticity Washable and Reusable for Multiple Cleaning Cycles No Cutting or Drilling on factory Parts for Faster Installation No tuning requiredApplication: 2014, 2015, 2016, 23017, 2018, 2019 Corvette Stingray, Grand Sport
  • 2014-2019 C7 Corvette Soler Performance Premium Modified 87mm Throttle Body

    2014-2019 C7 Corvette Soler Performance Premium Modified 87mm Throttle Body

    $435.00
    Free Shipping
    The C7 Soler Performance Premium Modified 87mm Throttle Body comes with a 1 year warranty, and can be easily installed in 15 minutes or less!FEATURES: โ€ข Optimized Active Contours (Both Upstream & Downstream) โ€ข Porting Taper and Upstream Bore (Lip & Bore Reduction) โ€ข Greater Discharge Coefficient of Plate/Blade โ€ข 16 Ra Microinch, Diamond Polished Surface Finish (Lower Skin Friction) โ€ข Half-Shaft (Front & Back) for Larger WOT Flow Area (91 mm Effective Bore) โ€ข Self-Cleaning Throat/Flow Gap โ€ข Minimized Gear Backlash โ€ข Countersunk, Thread-locked, and Peened Screws โ€ข Made from Brand New OEM Parts โ€ข Lower weight to power ratio at part throttle, for a more nimble/spirited driving experience (We doubled the rate of change of mass airflow (MAF) from 1.2 g/s-deg to 2.4 g/s-deg), 100% Increase! โ€ข Linearization and smoothing of the curve for a more predictable response and crisper shifts โ€ข Immediate response right off idling while keeping idling function undisturbed (No Hesitation/Stumble) โ€ข Does not require tuning. Warranty safe. โ€ข More air/power at every single throttle position after idle. Crucial for starting or expanding power gain modificationsApplication: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette Stingray/GS/Z51
  • 2015-2019 C7 Corvette Z06 aFe Momentum Cold Air Intake System 52-74202-C

    2015-2019 C7 Corvette Z06 aFe Momentum Cold Air Intake System 52-74202-C

    $1,476.00
    Free Shipping
    Everyone knows that the air flow into your Corvette is the way to horsepower. Whether it's a cold air intake or a sealed unit it all make more horsepower than the stock unit.Unique Computer Design Carbon Fiber Housing W/ Sight Window: The simple yet elegant design of the one-piece sealed housing makes installation a snap and features our patent pending filter-to-housing interface. A large clear sight window allows for filter inspection without removal of the air box. The housing is made out of lightweight high gloss, clear-coated plain weave carbon fiber and mounts directly into the factory location on the fender well to capture the coolest air available from the factory intake tract. Dyno-Tuned Carbon Fiber Intake Tube: Lightweight high gloss clear-coated plain weave carbon fiber tube to achieve maximum power gains while maintaining a perfect fit. One billet aluminum fitting is mounted on the tube to provide a perfect connection with the factory vacuum line. Large 3-Layer "Oil-Free" Performance Air Filter: This Momentum intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive 7" oval flange and is 8-1/2" tall Pro DRY S filter media. The Pro DRY S performance air filter features 3-layers of progressively finer mesh synthetic "oil-free" media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. Large 5-Layer Performance Air Filter: This Momentum intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive 7" oval flange and is 8-1/2" tall Pro 5R filter media. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. Black Series Momentum Air Intake System: Also included in the kit is a Black Series serialized plate to assure the authenticity of the intake. Premium Hardware:  Premium stainless steel T-bolt clamps and a silicone hump coupler are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation. Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.DETAILS: • +46 HP / +39 lbs. x ft. Torque max gains (vehicle tested with Pro 5R air filter media) • Outflows factory intake by 25% (with Pro 5R oiled air filter media) • Lightweight high gloss, clear-coated plain weave carbon fiber housing and tube • Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly • Unique (Patent Pending) Filter-to-Housing Interface for Easy Installation • Includes both Pro Dry S oil-free & Pro 5R oiled, washable/reusable performance air filters • Serialized Black Series plate for authenticity • Washable and Reusable for Multiple Cleaning Cycles • No Cutting or Drilling on factory Parts for Faster Installation • No tuning requiredApplication: 2015, 2016, 2017, 2018, 2019 C7 Corvette Z06 The best geek prank collection can be found at GeekPrank.com. Play with the Windows simulator, the fake upgrade screens, the fake disk formatter and other pranks.
  • 2015-2019 C7 Corvette Z06 Halltech Stinger-RZ

    2015-2019 C7 Corvette Z06 Halltech Stinger-RZ

    $679.99
    Halltech's 2015-2019 C7 Corvette Z06 Stinger-RZ will put you in the winner's circle. 1/4 mile e.t. improvement= .41 seconds; 1/4 mile trap speed improvement=6 mph! Dyno tests have shown between 38 and 52 RWHP with no tuning.   Two recent dynos at A&A Corvette (91 Octane-A8s) reported 44 RWHP/41 lb-ft and 50 RWHP and 43 lb-ft with the stock ECM parameters, i.e. no tuning. The ST689 filter is installed on all orders. Our dry filter is optional (ST589) Our Nomex Sock heat shielding is optional for $45.00 (product code Nomex). Just in: Halltech's Stinger-RZ runs a 10.77 @ 128 mph! Our customer previously ran an 11.16 @ 122 mph showroom stock. The DA was 2400' on the before and after 1/4 mile pass.  Application: 2015, 2016, 2017, 2018, 2019 C7 Corvette Z06
  • C7 Corvette aFe Power Momentum Sealed Intake System

    2014-2019 C7 Corvette aFe Power Momentum Sealed Intake System

    $472.00
    Free Shipping
    aFe is proud to introduce the all-new Momentum sealed intake system for the 2014-2018 Chevrolet Corvette (C7) with the V8-6.2L engine. This all-new Momentum intake system resulted in 18 horsepower and 22 lbs. x ft. torque and outflows the factory intake by 42%. This system is superior in every way, from the one-piece sealed housing to the massive air filter, roto-molded tube w/ built-in resonance chamber and premium hardware. This system uses a CAD designed, dyno-tuned, roto-molded intake tube & housing to achieve maximum power gains while maintaining a perfect fit. This is a direct bolt-on kit and requires no cutting or drilling on OEM parts. Unique One-Piece Housing w/ Sight Window: The one-piece sealed housing is used to eliminate the use of multiple components and ensure the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene and mounts directly into the factory location on the fender well to capture the coolest air available from the factory intake tract. Roto-molded Tube: This system uses a CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. This tube has a built-in resonance chamber to catch un-wanted air intake noises. Two billet aluminum fittings are mounted on the tube to provide a perfect connection with the factory vacuum lines. Massive Cone Air Filter: This Momentum intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive 7" oval flange and is 9-1/2" tall Pro 5R filter media. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. Premium Hardware:  Premium stainless steel T-bolt clamps and a reinforced silicone hump coupler are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation. Proven Results: After a rigorous design and testing phase, the results are in. The Momentum air intake system outflowed the factory intake by 42% and resulted in 18 additional horsepower and 22 lbs. x ft. torque. Power, Protection, and Simplicity. *Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles.      Application: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette
  • 2014-2019 C7 Corvette K&N Air filter Intake Kit KN 63-3081

    2014-2019 C7 Corvette K&N Air filter Intake Kit KN 63-3081

    $499.99
    Free Shipping
    If you are looking to add some more horsepower to your 2014-2019 C7 Corvette Stingray then an air intake kit is a very good place to start. K&N has been in the business of air induction longer than anyone, so you can rest assured that you are getting the highest quality inductions kit available for your C7 Corvette Stingray. This K&N Air Intake is shown to add 12.5HP to the C7 Corvette Stingray. PLEASE NOTE: This product is marked down to our lowest possible price. No coupon codes can be used or will be honored. Any coupon code used will result in the order being canceled. Thank you for your understanding.Applications: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette
  • 2014-2019 C7 Corvette K&N Air Filter RP-5285

    2014-2019 C7 Corvette K&N Air Filter RP-5285

    $249.99
    Free Shipping
    This 2014-2019 C7 Corvette Stingray drop-in replacement air filter is a great way to give your Stingray a little more horsepower and a little better fuel economy. This K&N air filter is Part number RP-5285. The RP-5285 Universal Air Filter is constructed from an oiled cotton filter media. It comes with a K&N embossed carbon fiber top and carbon fiber base for strength and durability. The carbon fiber element adds to the light-weight design and gives this filter a smooth glass like finish. The RP-5285 is a clamp-on filter that has an inside flange diameter of 3-11/16 inches. The base is 8-3/4 inches by 5-1/2 inches and the filter height is 7 inches.  PLEASE NOTE: This product is marked down as low as we can sell it. We are unable to accept any coupon codes. If a coupon code is used, we will have to cancel the order and refund your money. Thank you for your understanding. Includes: *Designed to boost horsepower and rate of acceleration *Can be cleaned and used again *High air flow with exceptional filtration *Lasts up to 50,000 miles before cleaning is required depending on driving conditions *Works with original equipment manufacturer vehicle electronics *Emissions legal in all 50 US states *Will NOT void vehicle warranty FREE GROUND SHIPPING ON THIS PRODUCT! Applications: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette
  • 2014-2019 C7 Corvette K&N Air Filter E-0665

    2014-2019 C7 Corvette K&N Air Filter E-0665

    $89.99
    Free Shipping
    This 2014-2019 C7 Corvette Stingray drop-in replacement air filter is a great way to give your Stingray a little more horsepower and a little better fuel economy. This K&N air filter is Part number E-0665. PLEASE NOTE: This product is marked down as low as we can sell it. We are unable to accept any coupon codes. If a coupon code is used, we will have to cancel the order and refund your money. Thank you for your understanding. Includes: *Designed to boost horsepower and rate of acceleration *Can be cleaned and used again *High air flow with exceptional filtration *Lasts up to 50,000 miles before cleaning is required depending on driving conditions *Works with original equipment manufacturer vehicle electronics *Emissions legal in all 50 US states *Will NOT void vehicle warranty FREE GROUND SHIPPING ON THIS PRODUCT! Applications: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette
  • 2014-2019 C7 Corvette Halltech Stinger-R Induction

    2014-2019 C7 Corvette Halltech Stinger-R Induction

    $679.99
    FULLY ROTOMOLDED PLASTIC. Halltech C7 Corvette Stinger-R Induction System. 475 HP! 40-120 mph in 5.8 seconds, 0-60 in 3.6 seconds and 0-120 in 11.3 seconds. 10 engine builder tuners have dyno tested our intake. +14 RWHP/14.3 RWT vs. the stock intake system. he Halltech C7 did 0-120 mph in 11.3 seconds recorded on the car DIC and our RaceLogic GPS Performance Box.Bolt-on, absolutely no tuning required, guaranteed no codes and no warranty issues ever; +13.6RWHP/14.3lb-ft torque Independent dyno results are from Late Model Racecraft. Katech Performance, Halltech Systems, LLC, Weapon X Performance, Texas Speed, Vengeance Racing, Nickey Chicago, Stingray Chevrolet, Liberty Chevrolet, Speed Inc, and many other dynos. No check engine lights or trouble codes ever with full warranty guarantee; perfect long term fuel trims and lower IATs retention than stock. Comes complete with our superflow connector hose, and ST-689 cfm filter, roto-molded airbridge, full instructions and 15 RWHP/16lb-ft torque without tuning (estimated)How can Halltech spank the stock induction system? First of all, we use our High Flow ST689 filter designed for the Z06 that has 50% more surface area. The high velocity design of our rotomolded bridge is design with taper flow for increased velocity and a true bellmouth radius velocity stack for perfect LTFTs and open loop fuel ratios. As indicated in the nomenclature, the Halltech ST689 cfm filter is our proprietary high flow filter just released for the C7 Stinger CKN and C7 Stinger-Hybrid intake systems. It also fits the Halltech Yellow Jacket as a replacement filter. K&N Engineering tested flow benched our intake several months ago on their SuperFlow test bench. The results on the flow bench: Halltech's Stinger-689 cfm @ 1.5" h1O. This was the filter Halltech tested at a 1/4 mile off road track and recorded 11.3 sec from 0-120 mph with our C7 AutoApplication: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette
  • C7 Corvette Z06 aFe Power Momentum Sealed Intake System

    2015-2019 C7 Corvette Z06 aFe Power Momentum Sealed Intake System

    $496.00
    aFe is proud to pre-release the all new Momentum sealed intake system for 2015 Chevrolet Corvette Z06 (C7) with the V8-6.2L supercharged engine. This all new Momentum sealed intake system outflowed the factory intake by up to 25%. Preliminary dyno results indicated gains up to 37HP and 33 lbs-ft torque. This all-new highly engineered intake system uses a smooth one-piece housing that keeps warm engine air out for maximum performance. The CAD designed intake tube is engineered to unleash all available horsepower and to fit perfectly. The system uses a unique filter-to-housing interface that enables us to use the largest filter possible while maintaining a simple hassle-free installation. The kit comes complete with all necessary hardware.  • Preliminary Dyno results up to +37 HP / +33 lbs. x ft. Torque max gains • Up to 11% increase in Flow - 260 CFM at 1.50" h10 • 100% Polyurethane Frame For Extra Long Filter Life • Pro DRY S "Oil-Free" 3-Layer Progressively Finer Porosity Synthetic Media For Maximum Convenience With Excellent Filtration Efficiency • No Cutting or Drilling on OEM Parts for Faster Installation Pro 5 R Features:• Preliminary Dyno results up to +37 HP / +33 lbs. x ft. Torque max gains • Up to 25% increase in Flow - 303 CFM at 1.50" h10 • Pro 5R Factory-Oiled Media for Maximum Performance • 100% Polyurethane Frame For Extra Long Filter Life • Washable and Reusable for Multiple Cleaning CyclesPro Dry S Features: Preliminary Dyno results up to +37 HP / +33 lbs. x ft. Torque max gains • Up to 11% increase in Flow - 260 CFM at 1.50" h10 • 100% Polyurethane Frame For Extra Long Filter Life • Pro DRY S "Oil-Free" 3-Layer Progressively Finer Porosity Synthetic Media For Maximum Convenience With Excellent Filtration EfficiencyUnique One-piece Housing w/ Sight Window: The one-piece sealed housing is used to eliminate the use of multiple components and ensure the coolest air intake charge available. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene and mounts directly into the factory location on the fender well to capture the coolest air available from the factory intake tract. Roto-mold Tube: This system uses a CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. One billet aluminum fitting is mounted on the tube to provide a perfect connection with the factory vacuum line. Massive Cone Air Filter: This Momentum intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive 7" oval flange and is 9-1/2" tall Pro DRY S filter media. The Pro DRY S performance air filter features 3-layers of progressively finer mesh synthetic "oil-free" media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. Premium Hardware: Premium stainless steel T-bolt clamps and a reinforced silicone hump coupler are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation. Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles. *Preliminary Dyno Results, Final Dyno Results Coming SoonApplications: 2015, 2016, 2017, 2018, 2019 C7 Corvette Z06
  • C7 Corvette Z06 aFe POWER Momentum Cold Air Intake System 52-74202-1

    2015-2019 C7 Corvette Z06 aFe Cold Air Intake System 52-74202-1

    $545.00
    Free Shipping
    aFe Power puts out some seriously great intakes for the C7 Corvette and also the Z06. The 52-74202-1 is one the top quality air intakes available on the market today. Thing about this cold air intake system is that it has been researched and developed from the ground up, utilizing all of aFe's own unique design and testing elements. So many other C7 Corvette air induction units are basically copies of one another, this one is not. If you take a look at the design of this unit you can see it definitely sets itself apart from the other Corvette Z06 cold air intake systems on the market. So many other Corvette induction units look like an add-on, like they really do not belong under the hood of General Motors masterpiece. However the aFe Momentum 52-74202-1 is different, it looks phenomenal, it looks factory, it looks like it belongs. Okay, I know what most of you are saying, "I really don't care what it looks like I want to know how it performs"... Well it performs just as good as it looks! aFe tests have shown nearly a 50 hp increase in nearly 40 pound feet of torque. We don't know of many other systems for the C7 Corvette Z06 that can come close to claiming those results. If you want the best we suggest you choose this aFe 52-74202-1. Everyone knows that the air flow into your Corvette is the way to horsepower. aFe's cold air intake for the C7 ZO6 Corvette will help you get all of the power that your supercharged V8 is making for increased horsepower and torque.The simple yet elegant design of the one-piece sealed housing makes installation a snap and features our patent pending filter-to-housing interface. A large clear sight window allows for filter inspection without removal of the air box. The roto-molded housing is made out of black cross-linked polyethylene and mounts directly into the factory location on the fender well to capture the coolest air available from the factory intake tract. This system uses a high-quality plastic CAD designed, dyno-tuned, roto-molded intake tube to achieve maximum power gains while maintaining a perfect fit. One billet aluminum fitting is mounted on the tube to provide a perfect connection with the factory vacuum line. This Momentum intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive 7" oval flange and is 8-1/2" tall Pro DRY S filter media. The Pro DRY S performance air filter features 3-layers of progressively finer mesh synthetic "oil-free" media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. This Momentum intake system was designed around the largest filter possible to allow maximum performance and filtration. This cone filter has a massive 7" oval flange and is 8-1/2" tall Pro 5R filter media. The Pro 5R performance air filter features 5-layers of progressively finer mesh cotton gauze oiled media and is constructed with 100% polyurethane frame for long life and multiple cleaning cycles. Premium stainless steel T-bolt clamps and a reinforced silicone hump coupler are used for strength and durability while also providing the most secure installation available. Momentum intakes are designed with fewer parts for a quick and simple installation. Note: This intake system is not CARB exempt at this time and is not legal for sale in California or use on vehicles registered with the California Department of Motor Vehicles. We will not ship to CA. Please do not ask.DETAILS: • +46 HP / +39 lbs. x ft. Torque max gains (vehicle tested with Pro 5R air filter media) • Outflows factory intake by 25% (with Pro 5R oiled air filter media) • Lightweight high gloss, clear-coated plain weave carbon fiber housing, and tube • Built-In Sight Window Provides Easy Inspection of Filter Without Disassembly • Unique (Patent Pending) Filter-to-Housing Interface for Easy Installation • Includes both Pro Dry oil-free & Pro 5R oiled, washable/reusable performance air filters • Serialized Black Series plate for authenticity, quality built! • Washable and Reusable for Multiple Cleaning Cycles, a lifetime for most Corvettes. • No Cutting or Drilling on factory Parts for Faster Installation and a clean look • No tuning required on the C7 Z06 CorvetteApplication: 2015, 2016, 2017, 2018, 2019 C7 Z06 Corvette  
  • 2014-2019 C7 Corvette aFe Silver Bullet Throttle Body Spacer

    2014-2019 C7 Corvette aFe Silver Bullet Throttle Body Spacer

    $174.99
    Serrated/Helix Design:  The Serrated/Helix design creates air turbulence in the intake manifold. This turbulence increases the air pressure in the combustion chamber resulting in increased horsepower, torque, and improved throttle response. The Serrated/Helix combination design also reduces intake whistle that occurs with other helix only designs. 6061-T6 Billet Aluminum Construction:  All Silver Bullet Throttle Body Spacers are precision machined from 6061-T6 billet aluminum for lightweight, high strength and perfect fit and finish. Installation Is A Snap:  This Silver Bullet throttle body spacer uses all factory mounting locations providing stability and a hassle-free installation.Features: • In-house Dyno testing resulted in max gains for 8 HP and 10 lbs. x ft. of torque • Billet Aluminum 6061-T6 Construction • Serrated/Helix Combination TBS Design for optimum airflow into the combustion chamber, precision machined from 6061-T6 aluminum. • Installation is a SnapApplications: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette

21 Item(s)

Grid List

Set Descending Direction

Talking about the air intakes or filters, Southern Car Parts has every kind of filter to keep your engine breathing. We only carry products from top brands like Halltech, K&N, aFe Power, Green Filters and more. A cold air intake is the best way to improve the performance of your C7 Corvette and give it more horsepower and better fuel mileage. We have a huge collection of high-flow air filter, cold air intake systems, cold air induction kits, stinger-R induction and many more to choose from. We also offer free shipping on various products to give you a hassle-free shopping experience. So shop for the best!

We also have recharge oil, filter cleaner, oil filters etc. to keep you fully covered and help your engine perform well. We ensure that we only deliver good quality products from top manufacturers at low prices so that maintenance doesn’t cost you a jackpot. In case of queries, please feel free to contact us. We’d love to help you out. If you too are looking for cold air intakes or filters for your C7 Corvette, then you’re at the right place. You can browse through our category of air intakes and filters here.

 

C7 Corvette Air Intakes/Filters

Minimal Price: $ 17.49 17.49

X