Call Us: 888-631-1433
COUPON CODES     SCP5: $5 OFF ORDERS OVER $125    SCP25: $25 OFF ORDERS OVER $275   SCP50 $50 OFF ORDERS OVER $550
Painted Parts are painted to order and take additional time, right now we are about a 6-8 week lead time. Please keep this in mind.
Previous image
2015-2017 Ford F150 Morimoto XB LED Headlights
  • Free shipping
Next image

        2015-2017 Ford F150 Morimoto XB LED Headlights

        2015-2017 Ford F150 Morimoto XB LED Headlights

        **The tail lights will not fit a truck that has BLIS tail lights from the factory **

        If you're looking for an easy way to get a noticeable upgrade look no further than Morimoto! These XB LED Headlights are easy to install and will last the life of your vehicle plus some!

        No Substitutes: If you don't have LED powered headlights on your Ford F-150, then you're just behind the times! Thankfully the new Morimoto XB LED headlights: Look great. Are well-built. Have a virtually infinite life span. An unbeatable warranty, and out-perform the alternatives. Easily making them the best Ford F-150 LED headlights on the market today.

        Factory LED Trucks: You will need to configure your new headlights to connect and function properly on your truck. Get in touch with us to find out how.

        OEM Plus: While the F-150 LEDs from Morimoto cost a bit more relative to other options in the aftermarket; as the saying goes "you pay for what you get". We've seen it all, and their fit and finish is far superior to everything else out there. Guaranteed.

        Performance: We've always been blown away by the fact that the other brands don't even consider how well their headlights perform on the road at night. Most often, they're a downgrade compared to even the standard halogen setup, and that's a shame. The good news is that Morimoto's XB LED headlights produce a well defined beam pattern with a great amount of width, intensity, and a proper distribution of light.

        DOT Approved: Make no mistake, these will produce a much different (better) result than slapping some LED replacement bulbs into your stock housings. Their quad-projector optics meet & exceed all SAE, DOT, and FMVSS108 regulations when aimed properly...and that's easy to do with their integrated vertical/lateral adjusters.

        Plug-N-Play: Wiring is easy too! The XB F-150 LED headlights are designed to work without any modifications. They will plug into the factory connectors for the stock headlights and each assembly includes all necessary connectors, rubber seals, and pigtails for a plug n play install. No error codes, no flickering, hyper-flashing, or radio interference. They can easily be removed, and will not void your factory warranty.

        Sequential LED DRL: Game Changer! These LED daytime running light are powered by Osram LEDs and are insanely bright, easily visible during the day. At the top of the housings, a row of LED's provides the turn signal function. You can set them up to run as sequential or solid signals according to your preference.

        Well Built: Our UV-coated polycarbonate lens will resist the test of time, ensuring your F-150 headlights will look good as new for many years to come. The PPS plastic housing is light-weight and much stronger than comparable alternatives. The die-cast aluminum heat-sinks inside the housings provide more than an adequate amount of cooling for the OEM grade Osram LED chips that produce the light. These complete headlights may be new to the market, but Morimoto's XB LED fog lights have proven themselves perfect after 5+ years out now, which is confidence inspiring.

        They Look: Amazing. At least in our opinion! The subtle elements incorporated in their design are more than enough to make them stand out, but they're clean enough to be considered original equipment to those who don't know any better. The piano black trim and smoked gray reflectors keep the color scheme neutral, and the quad kuria-optic projectors are as modern as it gets.

        Customizable: Thinking about paint-matching some OEM LED headlights from Ford? Forget it man. Those things are nearly impossible to open up and then reliably re-seal. Going that route, You'll be facing hours and hours of labor and a high probability for "hack job" status in the end. With Morimoto's F-150 LED headlights, that job is painless! Since they're sealed with Butyl Rubber, they are much easier to open, customize/paint and then reseal!

        Tech Specs:

        TRAFFIC PATTERN: LHD ONLY

        INPUT: Proprietary Ford Multi-pin

        WEATHER RATING: IP67 Waterproof

        LENS MATERIAL: High Impact Polycarb (UV-Resistant)

        LIGHT SOURCE: Osram Ostar Headlamp LED

        LED OPTICS: Kuria Quad Optics

        INTENSITY: 2,600lm (raw; each)

        COLOR: 5500K (Pure White)

        Application 2015, 2016, 2017 Ford F150

        0.0
          • 10% less
          Market price: $1891.65, you save $179.75
        • $1711.90

        OR
          • SKU
            FRD-MM405
          • Weight
            10 lbs
        • Configurator Products
          No
        • Configurator Status
          No
        • Covercraft Status
          No
        • Disable loading on additional products
          No
        • Disallow Use of Coupons
          Yes
        • MPN
          FRD-MM405
        • Part Number_333224
          FRD-MM405
        • Select Featured
          No
        • Optional Taillights
          No Thanks, Smoked, Red
        • Optional Matching Fog Lights
          Matching Fog Lights , No Thanks
        • Optional Clear Film
          LaminX Protective Clear Film , No Thanks
        Customer reviews
        Please sign in to add review
        There are no comments yet. Be the first to leave a comment

        We accept the following payment methods:

        Accepted payment methods

        Shipping

        We utilize UPS, Fedex, and USPS for all of our shipping needs. Carrier choice is based upon availability and needs of the customer and is the sole discretion of SouthernCarParts. We always try to ship within 24 hours of order placement (do to the custom nature of some products, shipping within 24 hours is impossible, actual shipping time frames will be listed in the product description). Please keep in mind that some products such as Custom Fit Car Covers, Lloyds Floor Mats, Painted accessories, and Racemesh Products can take 3 -10 days to ship and are charged at time of order placement. Racemesh products take 4 weeks to ship as they are made to order.

        Returns


        Should you need to return a part for refund, exchange, or credit, please contact our returns department within 30 days of purchase at orders@southerncarparts.com for a Return Merchandise Authorization (RMA) number. Most problems, such as installation, can be solved with a telephone call (888-631-1433). Southern Car Parts will not accept returned goods without prior authorization and an RMA# written clearly on the exterior of the box. The customer is responsible for freight on all return orders. Parts authorized to be returned, on a non-exchange basis, are subject to a 20% restocking fee. Returns will only be accepted within 30 days of the original date of shipment.  Custom painted parts - Once these parts are started, we can refund you less the paint(chemicals) that have been used. Exception is rear spoilers and front splitters, we can refund less 20%.

        Custom-made-to-order items are NOT returnable. This includes embroidered floor mats and car covers.
        Damages in Shipping

        All damages from shipping must be reported to Southern Car Parts within two business days from tracking number delivery confirmation. After two business days, damages become the responsibility of the customer.