Advanced Composite Specialties (ACS Composite) is an OEM validated composite manufacturer that specializes in RTM (Resin Transfer Molding). ACS assists its customers in product development, design, engineering, manufacturing, tooling and fabrication. We offer low to high volume composite manufacturing coupled with robotic trimming and bonding, as well as finishing and priming services.

Every ACS product, whether manufactured for the OEM's or for the aftermarket is engineered and validated to meet the stingiest performance and quality standards. With it's in-house design, tooling and manufacturing capabilities ACS is the leader in the performance aero segment.

With nearly 250,000 composite components built for various OEM automotive customers, ACS excels in a market where high quality meets competitive costing; therefore, allowing ACS to apply this knowledge to new applications where composite properties are favourable for achieving light weight, aero efficient durable components..

Advanced Composite Specialties


1-48 of 60

Page:
  1. 1
  2. 2

Grid List

Set Descending Direction
  • 2010-2013 Camaro SS9 ACS Sleeper Hood

    2010-2013 Camaro SS9 ACS Sleeper Hood

    $1,040.25
    Introducing the ACS SS9 Modular Sleeper Hood for the new generation Camaro and Camaro SS. Already producing some of the most popular Camaro hoods on the market, ACS is proud to offer Camaro enthusiast the ultimate in personalization. The SS9 hood, manufactured in ACS’s validated RTM process hood features a domed cowl higher than stock that still provides a close to stock sleeper style, to provide the space needed to install a larger forced induction system.Made from high quality polycarbonate components, so you can be certain that this hood is both attractive and durable, and will remain great looking for the life of your vehicle. Come gel coated and ready for painting.Because of the size and weight of this package and freight shipping constraints, shipping is flat rate freight $200 to any business address within the Continental 48 States. For shipment outside of this area, please call our office to work out the details. Fascia comes gel-coated and ready for painting.
  • C7 Corvette ACS Zero7 Extractor Carbon Hood

    2014-2019 C7 Corvette ACS Zero7 Extractor Carbon Hood

    $2,465.25
    What to give your 2014-2019 C7 Corvette Stingray a brand new look? ACS has built up a comprehensive range of sleek, stylish and cutting edge quality OEM components that highlight and augment the design and performance of the Stingray, the greatest American car. With the Zero7 hood, a lightweight, rigid and 100% Aerospace Grade Carbon Fiber, paragon of modern design and technology. The range has gained yet another shining light. As usual you will benefit from our trademark manufacturing process achieving unbelievably quality and durability. The C7 Corvette Stingray Zero7 hood benefits from the following characteristics: - Replacement carbon fiber hood - True Water Fall extractor feature with surface dropping into the original radiator duct work - 30 mm taller and longer cowl offering extra engine clearance for potential top mounted supercharger - Black ABS plastic octagonal mesh grill insert - Specially engineered and coated mounting hardware ensuring maximum impact resistance Meanwhile, the following features are optional extras: - Exposed Carbon weave in central cowl - Polycarbonate window insert showcasing the heart and soul of the Stingray's ‘power plant’ ACS is an OEM validated hood manufacturer and remains the only aftermarket specialty manufacturer, having built over 50,000 GM hoods and now, with the Zero7 hood, offering the ultimate hood for GM's supercar. If you are looking for a new hood for your C7 Corvette Stingray, you will not find a better-made hood anywhere. This hood is top of the line and exactly what your C7 Corvette deserves.Applications: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette
  • C7 Corvette Front Wheel Deflectors w/ACS Splitter

    2014-2019 C7 Corvette Front Wheel Deflectors w/ACS Splitter

    $94.05
    Our latest Stingray Performance component is the ACS-C7 Front Wheel Deflector kit. Developed to work in conjunction with our ACS-C7 Splitter 45-4-003. A functional detail to set your Corvette apart, proven on the race track; front wheel deflectors are for the track-oriented drivers who desire an optimal aerodynamic package. Front Deflectors are designed to push airflow around the rotating wheels more efficiently, reducing lift and drag. ACS-C7 Front Deflectors are installed with the supplied mounting hardware at the OEM wheel liner mounting points located inside the front fascia. Made of RTM composite, prepped and primed in black primer. Available Finishes    Black Primer with undercoating paint on inner surf ace Satin Black Finish with undercoating paint on inner surface Carbon Flash Finish with undercoating paint on inner surface   Designed to work in conjunction with the ACS-C7 Splitter 45-4-003 Installs in under 15 minutes.APPLICATION: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette
  • 2014-2019 C7 Corvette XL Rear Rock Splash Guards

    2014-2019 C7 Corvette XL Rear Rock Splash Guards

    $279.00
    Free Shipping
    Give your Corvette a new look by adding these XL splash guards. These guards not only will give you more protection from road debris over the GM splash guards they will add a new aggressive stylish look. Manufactured in a black ABS-PC plastic, the rock guards will withstand the impact of rocks and other road debris, protecting your Corvette. You can get these splash guards in carbon flash. The XL guards come with tabs that re-use the GM clips and will snap right into place. No extra drilling, cutting, or other modifications necessary. Simply snap-in, and drive comfortably knowing that your Stingray, Grand Sport, Z06, or ZR1 is protected. Available painted Carbon Flash to match the other trim parts on your C7 Corvette or with a Hydro Carbon fiber finish   Sold as a set; Each set contains a passenger and driver side.   Application: 2014, 2015, 2016, 2017, 2018, 2019, Stingray, Z06, Grand Sport, ZR1
  • c7 corvette acs carbon flash ducts

    2014-2019 C7 Corvette Painted ACS Five1 Intake Quarter Panel Ports

    $331.55
    Our brand new Rear Quarter Inlet ports for the Stingray are functional ports specifically designed to increase airflow to the rear mounted intercoolers **. Not only do they fulfill a specific performance objective, but as they are smoothly and innovatively designed and finished in a sumptuous Carbon Flash black paint they will add aesthetic appeal to your vehicle, giving it an even sleeker look.This part is 100% OEM quality, manufactured in injection molded ABS-PC* and benefits from an ABS grill insert. It is a replacement for the factory fitted part and as a modification it is, of course, fully reversible.This all sounds great and looks amazing, but is it tricky to fit? No, is the short answer. Our Rear Quarter Inlet Port has been designed for easy and quick fitting using 3 mechanical fasteners that are supplied as standard.This is just another example of an ACS performance panel that effortlessly achieves design and performance objectives alike. APPLICATION: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette
  • 2014-2018 C7 Corvette Convertible Widebody Conversion Kit

    2014-2019 C7 Corvette Stingray Convertible Rear Wide Body Conversion

    $2,999.00
    So you bought your new C7 Corvette convertible but didn't want to spend the extra jingle to get the Z06 model. But you love the look of the big fenders and the big meats crushing the concrete, so now it's available to you from ACS the leader in RTM composite aftermarket parts. ACS Wide Body Conversion Kit for the 2014-2019 C7 Stingray Convertible. The ACS RTM composite component collection for the Stingray C7 Convertible has once more been added to with this super sleek true bolt-on Wide-Body conversion kit. Designed in CAD using GM's OEM zero spec data and manufactured in RTM composites, our specially designed parts consign the myth of aftermarket parts not matching the, our panels are sold fully prepped and primed; all ready for trial fitting. The rear splash guards that come with the kit will add functionality to the style and help keep your ride clean. Specs and detailsGives an added 40 mm width on either side, allowing for room for 20x12 wheels with 335-25-20 tires Bolt-on kit includes driver and passenger sides quarter panels Rocker Extension Main quarter panel Five1 Rear quarter upper scoops (45-4-011) Rear fascia extension Rear splash guard Liners All hardware included Manufactured in RTM compositeThe widebody conversion kit will add some oomph and swagger to your C7 and installation, with the added benefit of allowing for larger wheels and tires, letting get the C7 power to the ground and improve acceleration times. Crucially, the OEM rockers do not need to be unglued from the car's aluminum rails - an expensive and dangerous procedure that would require that the doors are removed and potentially, through heating, distort the aluminum chassis. Fitting is estimated at 4 hours. Two versionsGS version Z06 version - scooped with functional brake coolingApplication: 2014, 2015, 2016,2017, 2018, 2019 C7 Corvette
  • ACS C6 corvette Zero6 Side Rockers

    C6 Corvette ACS Zero6 Side Skirts Rockers

    $799.00
    If you are looking to give your base model C6 Corvette a real improvement in looks and also with handling then you will want to take a good look at the newest creation from ACS Composites. The C6 Corvette Zero6 Side Rockers.ACS has brought a modern design inspired by the latest C7 Z06. The skirts have a curved profile to ease entry. ACS designs their skirts with an enlarged under car panel to further protect the painted underbody. A detailed instruction manual is included, installs using supplied black anodized split rivets.Application: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette Base Model
  • C6 Corvette Wide Body ZR1 Front Splitter

    C6 Corvette Wide Body ZR1 Front Splitter

    $597.55
    If you're looking to drastically improve your exterior Corvette styling by providing your Vette with a wider and more aggressive stance, a widebody kit is ideal for you. This ZR1 Style Wide Body Front Splitter, from ACS, will provide that incredible aggressive stance in high quality, performance, pieces. Manufactured from high quality, OEM-like materials, in a patented RTM process, these panels are both stylish and functional. An enlarged and wider front splitter provide vehicles with increased aerodynamics for better down force and drag numbers. Stylish, functional, and durable - these ACS Rocker Panels are everything you could ask for your C6 Corvette. ACS’s new C6 Corvette wide body front splitter is composed of two components; splitter and reinforcement. Both panels are molded in RTM composite with a smooth finish on both sides of the panel. Panels are shipped prepped and primed. Advantages are higher part quality and a clean smooth look for safe cleaning and an OEM appearance.Kit includes all necessary hardware including fasteners, mounting bolts and instructions.Item will fit all C6 Z06, ZR1 and C6's with front widebody conversions already installed.Shipping is flat rate freight $250 to any business address within the Continental 48 States. For shipment outside of this area, please call our office to work out the details. Fascia comes gel-coated and ready for painting. Also available in Painted Satin Black Finish. Please select options from the drop-down menu above. Application: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette Z06, ZR1, Grand Sport
  • 2014-2019 C7 Corvette ACS Carbon Fiber Side Skirts

    2014-2019 C7 Corvette ACS Carbon Fiber Side Skirts

    $1,424.95
    Designed to work in combination with downforce generated by the new ACS front splitter. These side rocker skirts are a direct fit for the base model Corvette Stingray. Fits 2014-2018 Stingray Corvette.  Pre-finished with a ceramic clear coat that will ensure the UV light will not turn the clear coat yellow over time. Manufactured with real 2x2 twill carbon fiber, not an overlay - this is the real deal!  Kit includes all necessary mounting hardware. Will Not Fit Z06 Application: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette
  • 2010-2013 Camaro Specter Werkes GTZ Extractor Hood

    2010-2013 Camaro Specter Werkes GTZ Extractor Hood

    $1,230.25
    Heavily modified Camaros run at mugh higher temperatures than they were ever meant to as result of the more powerful engine components. Improved thermostats, pumps, and radiators are fantastic ways to help this problem, but even those just cool down the inside of the engine. To keep the entire engine bay cooler, this active heat extractor hood actually utilizes active air opening to pull the hot air out of the engine bay. By doing this, the hot air in the engine bay is replaced by the cool air coming in through the front, which normally just buffers and leaves. The extractors give the air a means of passing through, and helping your powerful Camaro run cooler and perform better and more efficiently than ever before. At lower temperatures your LS engine delivers peak performance. With this Specter Werkes GTZ Extractor Hood, your LS engine will deliver peak performance.Camaro GTZ Hood. Built using sophisticated RTM production, this functional heat extractor hood not only adds an aggressive look, it also releases high pressure air and heat from the engine bay. The hood is a direct bolt on and includes all necessary hardware including grill screen and bezel.Hood will fit most all superchargers and other forced induction systems. Shipping is flat rate $200 freight to business addresses in the Continental 48 states. For shipping outside of this area, or to a private residence, please call our office for a proper shipping quote.
  • 2010-2013 Camaro Side Rockers (Camaro SS, RS, LS, LT)

    2010-2013 Camaro Side Rockers (Camaro SS, RS, LS, LT)

    $669.99
    Want that stylish look on your 2010-2013 Camaro or looking for maybe some added stability we have the answer. The new ACS Camaro side rockers are designed to complement our ACS-T2, T3, T4, and T5 Splitters. The rockers are molded in our RTM composite process, which gives the component a smooth finish on both sides. This process enables a higher quality piece with an added clean smooth look for safe cleaning and an OEM appearance. Fits all Camaro's except ZL1. For an added unique and functional rocker, install alongside the ACS Side Rocker Winglet (33-4-125)  Will not lower the ride height of the vehicle Enhance the aerodynamics of the car at high speeds Can be installed with several other splitters on the market  The rockers are mounted to the original OEM rocker panel using supplied mechanical fasteners. No 2-way tape or messy adhesive. Installs in 30 minutes. The kit includes:   Passenger Side Rocker Panel  Driver Side Rocker Panel  18 Rivets  Instructions
  • 2010-2013 ACS Camaro TLE Hood Conversion Kit

    2010-2013 ACS Camaro TLE Hood Conversion Kit

    $454.10
    Innovation is key to the ethos of ACS and even when existing products are of a high standard we don’t rest until we know that we have done our best to fulfil our commitment to style, synergy, functionality and product design. These elements come together in our new hood conversion system for the 2010-2013 Camaro and 2014-15 LS LT hood.ACS TLE 46-4-011 Hood insert on a 2010-2013 Camaro Hood or 2014-15 LS LT V6 Camaro Hood Kit includes: 1 - ACS Tl1 Hood Insert Pn 46-4-0111 - ACS 4Teen Water Tray1 - Outer Hood Trimming Template1 - Hood liner Trimming Template6 - M6 Nut with Mounted WasherInstructionsCan be modified to to clear top mount superchargers, and still retain water management. Whichever option you plump for, you will not be disappointed. All our parts as ever are high spec RTM composite material and at ACS we remain proud and vigilant to excel in a market where high quality meets competitive costing; achieving low cost, stylish, light weight, aerodynamic and durable OEM components.  We have: Created kits with templates, instructions and a proper inner panel to securely hold the 14 SS and TLE Insert to any 2010-2013-13 Non-Zl1 hood.Detailed instruction pack to remove the required bracing in order to achieve an appropriate flange for our inner panel.Added a water management system to direct water towards the front over the radiator while still extracting heat and high speed pressure build up at high speed.
  • 2020-2023 Corvette C8 ACS Rock Splash Guards

    2020-2024 Corvette C8 ACS Rock Splash Guards

    $499.99
    Free Shipping
    The ACS C8 Rock Guards snap into place in minutes so you can drive with peace of mind knowing your Corvette is protected from rock chips. The ACS Rock Guards offer more than double the protection over the GM flap. It features bladed shield that helps control rocks and road debris inside the wheel well, and an added downward extension to provide greater stopping power front and back. Manufactured in our proprietary PC Composite material, the ACS C8 Rock Guards will withstand extreme temperatures while protecting your C8 Corvette's paint from any debris projected by the spinning wheels. The guards are masked, sanded and baked in a Carbon Flash Metallic Black for a matching finish worthy of the C8. These rock guards are specifically designed to protect the lower portion of the C8 Corvette's body from damage caused by rocks, dirt, and other debris that can be kicked up by the car's wheels. They are also designed to complement the car's sleek, sporty design and can be painted to match the car's body color. HOW THEY INSTALL The ACS C8 Rock Guards can be installed in under 30 minutes! Each guard comes with a built-in tab with a metal press clip. Line the guards up to the inside of your wheel well and clip into place using the OEM mounting points. No drilling or two-way tape. This is a pure plug-and-play mod that will save you from re-painting the side of your Corvette. FEATURESHelps prevent scratches and rock chipping from road debris. Painted in Carbon Flash Black. Will match all the black trim on your C8. Sold in a complete set of 4 (2 Front, 2 Rears) Fits Coupe and Convertible Models. Fits Z51 & Non-Z51. Fits 2020-2024 C8 Corvette StingrayAPPLICATION: 2020, 2021, 2022, 2023, 2024 C8 CORVETTE 
  • C7 Corvette ACS-GS Stingray Rear Wide Body Conversion Coupe

    2014-2019 C7 Corvette ACS-GS Rear Wide Body Conversion Coupe

    $2,999.00
    So you bought your new C7 Corvette but didnt want to spend the jingle to get the Z06 model. You love the big fenders and the big meats crushing the concrete, so now its available to you from ACS the leader in RTM composite aftermarket parts. ACS Wide Body Conversion Kit for the Stingray C7 Coupe 2014-2018 The ACS RTM composite component collection for the Stingray C7 Coupe has once more been added to with this super sleek true bolt-on Wide Body conversion kit. Designed in CAD using GM's OEM zero spec data and manufactured in RTM composites, our specially designed parts consign the myth of aftermarket parts not matching the, our panels are sold fully prepped and primed; all ready for trial fitting. The rear splash guard that comes with the kit will add functionality to the style and help keep your ride clean. Specs and detailsGives an added 40 mm width on either side, allowing for room for 20x12 wheels with 335-25-20 tires Bolt-on kit includes driver and passenger sides quarter panels Rocker Extension Main quarter panel Five1 Rear quarter upper scoops (45-4-011) Rear fascia extension Rear splash guard Liners All hardware included Manufactured in RTM compositeThe wide body conversion kit will add some oomph and swagger to your C7 and installation, with the added benefit of allowing for larger wheels and tires, letting get the C7 power to the ground and improve acceleration times. Crucially, the OEM rockers do not need to be unglued from the car's aluminium rails - an expensive and dangerous procedure that would require that the doors are removed and potentially, through heating, distort the aluminium chassis. Fitting is estimated at 4 hours. Two versionsGS version Z06 version - scooped with functional brake cooling  Application: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette
  • 2010-2013 Camaro Front Tire Wind Deflectors

    2010-2013 Camaro Front Tire Wind Deflectors

    $132.05
    Give your 2010-2013 Camaro a more aggressive and finished look with these front tire wind deflectors. A functional detail to set your Camaro apart, proven on the race track; front wheel deflectors are for the track oriented Camaro Driver who desires an optimal aerodynamic package. Front Deflectors are designed to push airflow around the rotating wheels and tires more efficiently, and improve brake cooling. ACS's Front Deflectors are installed with supplied mounting screws at the OEM wheel liner mounting points located inside the front fascia.
  • ACS C6 corvette Zero6 Side Rockers

    C6 Corvette Z06/ZR1 ACS Zero6 Side Skirts Rockers

    $799.99
    If you are looking to give your wide body model C6 Corvette a real improvement in looks and also with handling then you will want to take a good look at the newest creation from ACS Composites. The C6 Corvette Zero6 Side Rockers.ACS has brought a modern design inspired by the latest C7 Z06. The skirts have a curved profile to ease entry. ACS designs their skirts with an enlarged under car panel to further protect the painted underbody. A detailed instruction manual is included, installs using supplied black anodized split rivets.Application: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette Wide body, including Z06, Grand Sport and ZR1
  • C6 Corvette ACS Zero6 Splitter 27-4-038

    C6 Corvette ACS Zero6 Front Splitter

    $799.90
    Your C6 Corvette base model is a pretty awesome car, no denying that. But if you want to give your Corvette a little something extra, then you'll want to consider this ACS Composites front splitter, dubbed ZERO6. Not only will the ACS splitter improve downforce, they have also incorporated functional brake cooling inlets that supply forced air to the original ductwork located in every C6. They are Manufactured in RTM composite and primed in black ready to be painted. Let us paint this great looking splitter to match your car so it is ready to bolt on when it arrives. Optional front wheel deflectors can be added for improved brake cooling while reducing brake dust on the side bodywork. The detailed instruction manual is included, installs using the supplied black anodized split rivets. This splitter comes in carbon flash
  • C7 Corvette 2014-2018 ACS Front Splitter with Deflectors Carbon Fiber

    2014-2019 C7 Corvette ACS Front Splitter with Deflectors Carbon Fiber

    $1,757.45
    Designed to work in combination with the new ACS Side Skirts. This front splitter is a direct fit for the base model Corvette Stingray. Fits 2014-2019 Stingray Corvette.  Pre-finished with a ceramic clear coat that will ensure the UV light will not turn the clear coat yellow over time. Manufactured with real 2x2 twill carbon fiber, not an overlay - this is the real deal!  Kit includes all necessary mounting hardware. Will Not Fit Z06Application: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette
  • 2014-2019 C7 Corvette ACS Zero7 Side Rocker Skirts

    2014-2019 C7 Corvette ACS Zero7 Side Rocker Skirts

    $499.00
    Are you driving around a C7 Corvette and are you looking for a sleek and high performance look and feel for your Stingray? If you are you are also looking for quality then you really cannot do any better than picking out a product from ACS Composite. These guys build some of the highest quality aftermarket aero accessories available for our Corvettes.   ALL NEW! Stingray Side Rockers for Chevrolet Stingray C7 Corvette   Despite already producing our Zero1 Rockers, after being inspired by the forthcoming Z06 / Z07 model Corvette unveiled in January, we let our temptation run wild and free. We think you’ll agree that what we have created is yet more evidence for our commitment to style, synergy and evolution.   Introducing the C7 Zero7 Side Rockers   As always the Zero7 Side Rockers come fully prepped and primed, as well as smoothly molded using our RTM composite process that makes rough edges a thing of the past. Our customers loved our Zero1 Side Rockers and requested something similar, but different. We were more than happy to oblige. Our dedication to smooth lines and sumptuous contouring has never been more evident making it hard to believe that the Stingray did not always possess these Side Rockers; such is the perfection of the marriage between component and vehicle.   The installation process takes only 30 minutes per side, using the mechanical fastener kit supplied and avoiding the use of messy adhesives or double-sided tape.  Our Stingray Side Rockers carry the following features as standard: *Manufactured in an OEM-validated RTM composite material *Enhances your car’s aerodynamics at high speeds *Will not lower the ride height of the vehicle *Smooth finish to both sides that looks and feels good, and facilitates easy cleaning *Mounted to the original OEM rocker panel *Installation kit including (Passenger/ Driver Side Rocker Panels, 18 Scrivens, 16 U-nuts & Bolts, Easy Instructions). Compatible with several other splitters on the market Select finish when ordering: *Primed Finish *Satin Black Finish *Carbon Flash FinishAPPLICATION: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette
  • C7 Corvette ACS Front Splitter

    2014-2019 C7 Corvette ACS Front Splitter

    $474.05
    The sleek ACS-Stingray Splitter rivals such an event for pure synergy, effortlessly uniting frontal aerodynamics, style, fuel-efficiency, simplicity, and elegance. Fully prepped and primed with a stunning optional black satin finish, the ACS-Stingray will grace both coupe and convertible models of the Chevrolet Stingray, 2014+. The ACS-Stingray carries the following features as standard: Fuel optimizing non-restricting mechanism achieved via central opening Manufactured in an OEM-validated RTM composite material Complete undercarriage pan for protection and rigidity 3 undercarriage fins, which keep airflow laminar, while directing air to the brakes and rear of the car Use of OEM mounting points for simple assembly Will not lower the front ride height of the car Items ships in primer finish ready to paint, or select the optional satin black finish and optional front wheel defectors for a more aggressive look! Shipping is $100 Flat Rate to the Continental 48 States!! APPLICATION: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette
  • C7 Corvette ACS Z06 Rockers Skirts

    2015-2019 C7 Corvette ACS Z06 Rockers Skirts 45-4-029

    $474.05
    Fitment for the C7 Z06 and Grand Sport Only If your Corvette did not come with side rockers and you're looking for a very high-quality set that you don't want to break the bank and jump on a set of GM pieces in these ACS composite are exactly what you want. The quality the fit the finish in the appearance is every bit as good as original GM pieces but a fraction of the price as you would expect to pay from General Motors.The C7 Corvette Z06 side rockers are designed exactly like the original pieces from GM, neither a prime finish, satin black or a painted Carbon Flash Metallic finish. Carbon Flash Metallic is the GM black speckled paint that is found on many of the accessories in and around the car. Like the front grill, many of the side vents, many of these small pieces. We believe matching your side rockers to the rest of the accessories on the car creates a visually pleasing appearance in great overall look to your Z06. It is our pleasure to introduce our new Z06 side rockers. Our rockers are a replica of the Aero3 side rockers and yet ours will only set you back a third of the price of the originals. Not content with providing incredibly competitive pricing, we’ve actually ensured that our side rockers will offer an advantage over their GM counterparts, we have extended the undercarriage section to fully protect the OEM painted rocker section.  So, as well as improving the aerodynamic performance of your vehicle, our rockers will protect some of your precious paintwork. As is standard with ACS parts, the Z06 size rockers come fully prepped and primed – smoothly moulded and finished with a precision and finesse that truly stands out. The design is cleverly tailored to suit the wider body of the model and adds zest to what is already a spicy ride. The manufacturing of our side rockers is designed with simplicity in mind, ensuring that installation can be completed in a mere 30 minutes, using the mechanical fastener kit supplied and avoiding the use of messy adhesives or double-sided tape. The following features come as standard:Manufactured in an OEM-validated RTM composite material Will enhance your car’s aerodynamic attributes at high speeds Will not lower the ride height of the vehicle Contoured profile for easy access Smooth finish to both sides that exudes class and facilitates easy cleaning Mounted to the original OEM rocker panel Protects OM painted rocker panel Installation kit Road Guard protective coating sprayed on inner surfaces for longevity and show finish  Available FinishesBlack Primer with undercoating paint on inner surface Satin Black Finish with undercoating paint on inner surface Carbon Flash Finish with undercoating paint on inner surfaceApplication: 2015, 2016, 2017, 2018, 2019 C7 Corvette Z06 and Grand Sport Only
  • C7 Corvette ACS Zero1 Side Skirts Package

    2014-2019 C7 Corvette ACS Zero1 Side Skirts Package

    $474.05
    If you are driving around a stock C7 Corvette and you are looking to add some visual upgrades to the exterior or if you're looking to add a little bit of performance and handling upgrades to that same Corvette and take a good look at these Zero1 side rockers. One of the leading manufacturers of aftermarket aero components for the C7 Corvette, ACS composite, not only manufactures some of the highest quality pieces available but they also spend some of the most extensive time researching and developing their products for optimal performance and extremely sporty look. If you don't want to follow in line with the rest of the crowd but would rather stand out then don't delay pick up a set of these quality built side skirt rockers built by ACS. Continuing our quest for synergy and style, our ACS-Stingray Side Rockers will complement our new Splitters in the same range quite beautifully. Fully prepped and primed the ACS-Stingray Side Rockers are smoothly molded using our RTM composite process that makes rough edges a thing of the past. The installation process takes only 30 minutes per side, using the mechanical fastener kit supplied and avoiding the use of messy adhesives or double-sided tape. The ACS-Stingray Side Rockers carry the following features as standard:Manufactured in an OEM-validated RTM composite material Enhances your car’s aerodynamics at high speeds Will not lower the ride height of the vehicle Smooth finish to both sides that looks and feels good, and facilitates easy cleaning Mounted to the original OEM rocker panel Installation kit including (Passenger/ Driver Side Rocker Panels, 18 Scrivets, 16 U-nuts & Bolts, Easy Instructions). Compatible with several other splitters on the marketOptional satin black paint finish.Shipping is $75 Flat Rate to the Continental 48 States! APPLICATION: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette
  • C7 Corvette  Enhanced Front Wheel Splash Guard Set

    2014-2019 C7 Corvette Enhanced Front Wheel Splash Guard Set ACS

    $220.99
    Make sure you protect that thing. That's one of the first things we tell a new C7 Corvette owner. Pretty much as soon as you put wild of the dealership parking lot you can be sure those wide tires will start to pick up small stones and start chipping away at your factory painted finish. A great way to give your Corvette protection very quickly is to simply install a set of these C7 Corvette ACS splash guards. These splash guards are built just as nice as anything from the factory and look every bit as good as well. You have a brand new C7 Corvette Stingray, Grandsport, or Z06 with side skirts and the edges of them are chipping away due to road debris. GM should have extended the splash guard slightly longer to keep this from happening. Well, we have the answer to your problems with this C7 Corvette Enhanced Front Wheel Splash Guard Set. Notice in the image above the factory splash guard is too short and causes chipping on the side skirt area. Our splash guards are 15mm longer and 30% wider than the GM splash guards; thus, the side paneling and brake scoop are protected from rocks flinging towards them. For the Z06, we designed the splash guards to curve, which offers more protection to the rear scoop. In combination with our side rockers, rock chipping can be drastically reduced. The ACS splash guards are injected in an ABS-PC black plastic texture. Designed to match the current trim pieces on the C7 Stingray and Z06 front fender extensions or the rear GM splash guards. If customers already have them, then they need only to upgrade the front. ACS enhanced splash guards are installed within 30 minutes! Mudflaps are fastened using 3 screws already located on your car. These are currently used to fasten the wheel liner to the fender flange. The mechanical fasteners were selected for its tighter pull to the wheel liner compared to the OEM pressure clip. The tight fit ensures no pebbles can infiltrate between the two, which will otherwise lead to audible rattling. These are available in 3 finishes.Textured Black Satin Black Carbon FlashApplication: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette Stingray Z06 and Grand Sport
  • 2014-2015 Camaro V8 SS ACS T4 Front Splitter

    2014-2015 Camaro V8 SS ACS T4 Front Splitter

    $525.60
    Splitter is a full under covering panel mounted using the OEM fasteners and a series of additional mechanical fasteners. Will direct and enhance the frontal airflow of your Camaro while adding a distinctive aggressive look. Installs on all 2014-2015 Camaro SS front fascia's and will not lower the vehicle's ride height. *Improves airflow for greater downforce.  *Mounts using a series of supplied mechanical fasteners.  *Does not require the front fascia to be removed.  *Installation time is under 15 minutes. This comes in Satin Black ACS-T4 Deflectors (46-4-003) can be added for improved side airflow.
  • 2010-2013 Camaro ACS T5 Front Splitter 33-4-101

    2010-2013 Camaro ACS T5 Front Splitter 33-4-101

    $528.99
    The 2010-2013 Chevrolet Camaro ACS T5 Splitter is one of the hottest selling Camaro splitters on the market and we have no doubt why. This is a great-looking splitter that not only adds style, but adds function. The composite T5 Splitter will install on all 2020-2013 Camaro LS, LT, RS, V6 front fascias and won't lower the vehicle's ride height. Mounts use a series of supplied fasteners and does not require the front fascia to be removed. Installation time is around 15 minutes. This Camaro splitter will not lower the ride height, it is the most durable in addition to its complete belly pan to cover the undersurface of the Camaro V6 fascia. Protect your OEM paint while improving airflow of the frontal area of your Camaro. This comes in satin black. This Camaro splitters comes prepped and primed in with all the required hardware and instructions. We estimate the installation time to be 15-30 minutes.
  • 2014-2019 C7 Corvette Front Splash Guard Set by ACS

    2014-2019 C7 Corvette Front Splash Guard Set by ACS

    $129.99
    It's time to protect your investment with a set of ACS wide splash guards. These splash guards protect about twice as well as the GM aftermarket pieces. These ACS C7 Corvette Stingray splash guards are made of ABS plastic and sold as a two-piece front set. Available in standard black plastic or painted in Carbon Flash Metallic, any other body color, and hydrocarbon fiber. Painted will take 3-4 weeks to ship out, so please be aware of the lead time when placing and order.The GM splash guards do NOT cover enough of the side paneling of the Corvette. Even more so with Stingrays that are fitted with side rockers. GM splash guards leave the front leading edge of the rocker exposed and vulnerable to erosion. See image below:  Notice how the GM splash guard is not sufficiently long enough to prevent damage to the rockers, and more so to the Z06 Rear Brake Scoop & Stingrays fitted with ACS' Z06 Brake Scoop. See image below: This is devastating when rocks are flung upwards by the sticky C7 tires. Thankfully, our design team created a solution to avoid such disasters. Our Solution: Our splash guards are 15mm longer and 30% wider than the GM splash guards; thus, the side paneling and brake scoop are protected from rocks flinging towards them. For the Z06, we designed the splash guards to curve, which offers more protection to the rear scoop. In combination with our, side rockers rock chipping can be drastically reduced. Ingenious Compatibility: The ACS splash guards are injected in an ABS-PC black plastic texture. Meticulously designed to match the current trim pieces on the C7, and Z06 front fender extensions or the rear GM splash guards. Therefore, if customers already have them, then they need only to upgrade the front. Rapid Installation:ACS enhanced splash guards are installed within 30 minutes! Mudflaps are fastened using 3 screws already located on your car. These are currently used to fasten the wheel liner to the fender flange. The mechanical fasteners were selected for its tighter pull to the wheel liner compared to the OEM pressure clip. The tight fit ensures no pebbles can infiltrate between the two, which will otherwise lead to audible rattling.  Elegant Design: Our enhanced splash guards are beautifully styled to match the sleek contoured design of the C7. The injected black ABS components not only match GM rear guards but also look the business! If you are looking to make your piece stand out from the rest, then the splash guards are offered in a Carbon Flash Black finish that will truly stand out from the rest! The Conclusion Your C7 is vulnerable to rock chipping due to its sticky performance tires. With the ACS Splash Guards, you will safeguard your C7 from the inevitability of paint chipping.  Application: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette Base and Z06
  • 2015-2019 C7 Corvette Z06 / Grand Sport Rear Fascia Extensions

    2015-2019 C7 Corvette Z06 Grand Sport Rear Fascia Extensions

    $179.00
    Free Shipping
    If you are looking to add some style and help keep your Corvette looking great these rear fascia extensions are just what you need. These rear fascia extensions enhance the ground effects on your Corvette and will protect your rear bumper cover from stone chips from the rear tires. The extensions create a continuous line from your front splitter to the side skirts, and then to the rear. The result is a balanced ground effect look from the front to the rear of the C7 Corvette.  Manufacturing and Fitment The rear fascia extensions are manufactured in an ABS-PC similar to the C7's rear diffuser material. ABS is an excellent material that remains rigid overtime, resistant to road debris chipping, and is relatively weightless compared to other components. Additionally, the ACS rear fascia extensions are designed using GM's C7 data for that perfect fit that ACS prides itself on. No modifications are needed to be done to the fascia or product.  Key PointsManufactured in an OEM-validated ABS-PC composite material Pre-painted in Carbon Flash Metallic Black to match all C7 black pieces (diffuser), ground effects, etc. Installs with existing OEM mounting bolts from the rear diffuser, and two supplied aluminum split rivets. No drilling is required unless you want to use the rivets to help secure the rear fascia extensions. Application: 2015, 2016, 2017, 2018, 2019 Corvette Z06, Grand Sport  
  • 2014-2019 C7 Corvette ACS Five1 Z51 Wicker Spoiler Conversion Kit

    2014-2019 C7 Corvette ACS Five1 Z51 Wicker Spoiler Conversion Kit

    $299.99
    The benefits   If downforce is your wish then our brand new wicker spoiler conversion kit will be a dream addition to your Stingray! Manifesting in two sleek, stylish carbon flash black pieces that add a functional, sporty feel to the rear end, our conversion kit is a great addition to the Z51 spoiler and more evidence that ACS are the clear winners when it comes to understanding the importance of synergy in design and performance. This part has been purpose designed to heap that little extra downforce on the rear end of your C7 Corvette Stingray.   Complements existing components   Our engineered parts are made in ABS-PC plastic injection and painted ‘Carbon Flash Black’ specifically in order to match the Stingray's other trim parts, including the Hood Insert, Rear Quarter Ports, Diffusers and Fender Inserts. Once fitted, you will wonder why it wasn’t always there.   Easy and clean install   Our kit can be installed with NO mods, using the OEM spoiler mounting points   No bolts are visible from the rear or side resulting in a clean and fluid look   No riv-nuts are required, which in turn means no need for drilling holes or special tools   Requirements   This kit is for the 2014 -2019 C7 Corvette Stingray       The Z51 Spoiler is needed for the conversion Gm Pn 22880620      Applications: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette
  • 2014 2015 Camaro V6 ACS Front Splitter T5

    2014 2015 Camaro V6 ACS Front Splitter T5

    $525.60
    This all new 2014 Camaro ACS-T5 splitter is designed for the 2014 and up Camaro LS LT RS, or V6 Trim. This 2014-2015 Chevrolet Camaro ACS splitter follows the same stricy manufacturing tests of previous T5 splitters. The quality is just as good as previous splitters and this RTM composite component will not lower your vehicle’s ride height and will assist in allowing the free flow of air in the front end.This new addition to our ever-growing inventory of highest quality modification fits perfectly in our aim for total synergy between performance, style and durability. Fully prepped and primed with a stunning optional black satin finish, this splitter is a welcome, desirable addition to our range.Features:  Improves airflow to yield greater downforce  Simple mounting using a series of supplied mechanical fasteners  Does not require removal of front fascia  Installation time under 15 minutes.  Instructions and hardware provided
  • C7 Corvette Five1 Z51 Bolt on Wicker Spoiler Conversion Kit

    2014-2019 C7 Corvette Z51 Bolt on Wicker Spoiler Conversion Kit

    $319.00
    Following our original Five1 Spoiler conversion system, we have our Bolt-On Wicker System. No need to remove the rear spoiler for the installation, and now with visible bolts, just like the Z06. If downforce is your wish then you are looking at the right place. Sold in carbon flash black matching the other trim panels on the C7 add a functional, sporty feel to the rear end. Our conversion kit is a great addition to the Z51 spoiler and more evidence that ACS are the clear winners when it comes to understanding the importance of synergy in design and performance. This part has been purpose designed to heap that little extra downforce on the rear end of your C7 Corvette Stingray. Complements existing components  Our engineered parts are made in ABS-PC plastic injection and painted ‘Carbon Flash Black’ specifically in order to match the Stingray's other trim parts, including the Hood Insert, Rear Quarter Ports, Diffusers and Fender Inserts. Once fitted, you will wonder why it wasn’t always there. Easy and clean installInstall onto the existing spoiler via 6 Riv Nuts and Bolts. Requirements This kit is for the 2014 -19 C7 Corvette Stingray The Z51 Spoiler is needed for the conversion Gm Pn 22880620 Application Guide C7 Stingray, requires a Z51 SpoilerApplication: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette
  • 2010-2013 Camaro ACS T4 Front Splitter 33-4-099

    2010-2013 Camaro ACS T4 Front Splitter 33-4-099

    $516.00
    The 2010-2013 Chevrolet Camaro ACS T4 Splitter is latest product driven by Camaro owners. The quality made composite T4 Splitter will install on all Camaro SS front fascias and doesn't lower the vehicle's ride height. This Camaro splitter mounts using a series of supplied mechanical fasteners and does not require the front fascia to be removed. Installation time is under 15 minutes.This Camaro splitter is very quick and easy to install. Given it won't alter the ride height, it is the most durable in addition to its complete belly pan to cover the under surface of the SS fascia. Protect your OEM paint while improving airflow of the frontal area of your Camaro.This Camaro splitters comes prepped and primed in with all the required hardware and instructions. Estimated installation time: 15 minutes.
  • 2010-2013 ACS Camaro 4Teen Hood Conversion Kit

    2010-2013 ACS Camaro 4Teen Hood Conversion Kit

    $389.99
    Free Shipping
    Innovation is key to the ethos of ACS and even when existing products are of a high standard we don’t rest until we know that we have done our best to fulfil our commitment to style, synergy, functionality and product design. These elements come together in our new hood conversion system for the 2010-2013 Camaro and 2014-15 LS LT hood. In accordance with customer demand we have come up with two distinct options, each of which improving on the existing method of hood modification, so before we introduce the two options, let’s focus on what’s new. Option 1, ACS 4Teen Hood Conversion Kit, Pn 33-4-175 2014-15 Camaro SS Hood inserts on a 2010-2013 Camaro Hood or 2014-15 LS LT V6 Camaro Hood Kit includes: 1 - Genuine Gm SS Hood Extractor insert painted Satin Black1 - ACS 4Teen Water Tray1 - Outer Hood Trimming Template1 - Hood liner Trimming Template6 - M6 Nut with Mounted WasherInstructions
  • C7 Corvette ACS Composites Five1 Front Lip Spoiler

    2014-2019 C7 Corvette ACS Composites Five1 Front Lip Spoiler

    $379.05
    Inspired by the success of our popular Stingray Splitter, the ACS team has developed an enthusiast driven product. A spoiler specifically designed with daily drivers in mind, are you concerned about steep driveways, underground parking or curbs? The scraping sound will be something of the past, our Five1 Front Spoiler is designed with maximum ground clearance in mind while adding a much needed final touch to the front end of the stunning Stingray nose. ACS has returned to the design table and invested time and effort into developing the ultimate road race driven front lip spoiler, honing its design until it reached its natural conclusion, becoming a sleek, sporty front spoiler, carving a menacing front end that exudes serpentine flair. Once again, this quality component provides the height of design and efficiency with effortless guile. Fully prepped and primed with a stunning optional black satin finish or carbon flash, the Five1 Front Spoiler will prove a deadly, sporty addition to both coupe and convertible models of the Chevrolet Stingray. This new design has been laboured over with all the due diligence, care and love that ACS puts into each and every component has resulted in a stunning product that not only looks the business, with its perfectly honed contours, but offers the perfect compromise between styling, drivability and added function.  Standard featuresManufactured in an OEM-validated RTM composite material OEM mounting points used to ensure easy assembly Will not lower the front ride height of the car (Actually sits just over the current ride height, making it the most non compromising spoiler on the market) Road Guard protective coating sprayed on inner surfaces for longevity and show finishOptional featureOptional Front Wheel Deflectors / winglets are designed to push airflow around the rotating wheels more efficiently. ACS-C7 Front Deflectors are installed with the supplied mounting hardware at the OEM wheel liner mounting points located inside the front fascia. 45-4-031 Five1 Spoiler only 45-4-033 Five1 Spoiler with Deflectors / winglets 45-4-035 Five1 Deflectors /winglets onlyAvailable FinishesBlack Primer with undercoating paint on inner surface Satin Black Finish with undercoating paint on inner surface Carbon Flash Finish with undercoating paint on inner surfaceSplitter and Deflectors (45-4-033) will fit all stingray Splitter with no Deflectors (45-4-031) will fit Z06 Models and StingrayAPPLICATION: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette
  • 2014-2019 C7 Corvette Stingray ACS Five1 Front Grille

    2014-2019 C7 Corvette Stingray ACS Five1 Front Grille

    $1,080.99
    This ACS Five1 Replacement Bumper Grille for your C7 Corvette Stingray is now available. As with all ACS components, this lavishly styled and thoughtfully conceptualized grille will grace both the standard Stingray and its Z51 equipped counterpart. Functioning as a replacement for the factory installed grille, it is a fully reversible modification that could not be simpler to install. All you need to do to complete this transformation is remove the existing stock grill and snap this C7 Five1 grille into place. If your car is equipped with the Z51 option, the Five1's funneled brake cooling intakes will augment and enhance the functioning of your factory brake cooling ducts, adding further function to this stylish grille component. Each grille comes pre-painted in Carbon Flash Paint. This is an ABS injected molded grill is pre-installed on the Five1 assembly, fully ready for installation. FREE UPS GROUND SHIPPING TO THE LOWER 48 STATES!Applications: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette
  • C7 Corvette Z06 ACS Splitter For Z06 or Stingray 45-4-037

    2014-2019 C7 Corvette Base and Z06 ACS Splitter

    $690.00
    If you're driving around it 2014 through 2019 C7 Corvette, Grand Sport, or Z06 and you want the ultimate in a new front chin splitter then you have found your stopping point to what can seem like an endless search. The ACS Composite 45-4-037 front splitter is a Z06 style and identical to the similar optioned from the factory by GM on the Z06 Corvette C7.This front splitter is manufactured by all the highest standards with the tightest tolerances in the absolute best finishes available. If you want to Corvette chin splitter that will not only look great but function both on the road and on the track that this definitely the chin spoiler for you. Introducing the ACS-Z06 Splitter for both the Stingray and Z06 C7’s. The C7 front end is already stunning, many say it is perfect, for most enthusiast a front splitter is the ultimate add-on bringing the car to a new level of perfection. The new ACS-Z06 Splitter is derived from the Z07 package GM spent tremendous time aero-testing. Don’t let this fool you; this is no knock off part. Redesigned in Cad and CNC machined, the ACS-Z06 Splitter is designed from the ground up. It does share the same styling cues and produced in ACS’s proprietary RTM manufacturing process following the tightest quality standards, and of course with a few slight improvements in design and costing. If you own a Z06 or a Stingray, you will have the choice to add our optional enhanced undertray, which is molded to the splitter. This is done for several reasons; most importantly to enhance aerodynamics by keeping all edges smooth and directing air with the minimum amount of turbulence or distractions. A great side benefit is also increased strength to better live through the dreadful driveway scrape. The changes don’t end here, we also revised the brake cooling ducts and added extra mounting points will linear fins, again to help keep airflow as laminar as possible. Winglets have over the last few decades been used by both commercial and corporate jets. Jet designers have long known that airflow off the end of a wing caused drag. With the implementation of the winglet, airflow was improved and planes moved more efficiently. The same principle applies to the latest Corvette Winglets / Deflectors line. Optional Reflectors: Every splitter package will include small end cap to block the holes in the event no deflectors are installed. A clean elegant option if deflectors are not your thing. Our S2, similar to the Z06 Stage 2 deflectors, are the smallest and conservative option. For aero-performance and a bold look, the S3 is the choice to consider. Specific deflectors are available for both the Z06 and Stingray. The ACS-Z06 S3 Deflector is also manufactured in RTM composite, available in Primer or Carbon flash black and mirroring the Stage 3 GM offering found on the Z07 package. The ACS-Stingray S3 Deflector is the jewel of our latest splitter line, specifically designed to fit the non-wide bodied Stingray, it is exclusive to the Stingray for enhanced brake cooling and a bold new look honoring it’s bigger brother, the Z07. Application: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette, including base, Grand Sport and Z06 (deflectors not compatible with Z06)
  • C7 Corvette ACS Zero 1 Z06 Rockers Skirts

    2014-2019 C7 Corvette ACS Zero1 Z06 Rockers Skirts

    $474.05
    All New ACS Side Zero1 Rockers for Corvette Z06 -- OEM Quality for a Third of the Price of GM Part! – It is our pleasure to introduce our new Zero1-Z06 side rockers. So, as well as improving the aerodynamic performance of your vehicle, our rockers will protect some of your precious paintworks. As is standard with ACS parts, the Zero1 size rockers come fully prepped and primed – smoothly molded and finished with a precision and finesse that truly stands out. The design is cleverly tailored to suit the wider body of the model and adds zest to what is already a spicy ride. The manufacturing of our side rockers is designed with simplicity in mind, ensuring that installation can be completed in a mere 30 minutes, using the mechanical fastener kit supplied and avoiding the use of messy adhesives or double-sided tape. The following features come as standard:Manufactured in an OEM-validated RTM composite material Will enhance your car’s aerodynamic attributes at high speeds Will not lower the ride height of the vehicle Contoured profile for easy access Smooth finish to both sides that exudes class and facilitates easy cleaning Mounted to the original OEM rocker panel Protects OM painted rocker panel Installation kit Road Guard protective coating sprayed on inner surfaces for longevity and show finishAvailable FinishesBlack Primer with undercoating paint on inner surface Satin Black Finish with undercoating paint on inner surface Carbon Flash Finish with undercoating paint on inner surfaceApplications: 2015, 2016, 2017, 2018, 2019 C7 Z06 Corvette
  • 2010-2013 Camaro Z28 Inspired Rear Spoiler by ACS

    2010-2013 Camaro Z28 Inspired Rear Spoiler by ACS

    $540.55
    Do you want a Rear Spoiler that not only looks great but also measurably adds down force? The 2014 Camaro Z/28 came with this spoiler and ACS decided to model this brand new Rear Deck Spoiler for the 2010-2013-13 Camaro following the footsteps of the legendary 14’ Z/28.Fine-tuning a concept that has been thoroughly tested to improve design and efficiency we lovingly implemented a few minor adaptations to this Spoiler so that it blends in with the character and line of the vehicle for which it has been designed. ACS are, as always proving that our design and manufacturing teams are relentless in their pursuit of perfection.The Rear Deck Spoiler is designed for the 2010-2013 Camaro.The details:*Manufactured in an OEM-validated RTM composite material  *Enhances down force.  *Fully prepped and primed  *Available in four mounting layouts  *Standard Coupe Version for LS /LT/RS/ SS Read decks  *Convertible LS /LT/RS/ SS Read decks  *ZL1 coupe replacement version  *ZL1 Convertible replacement version
  • C7 Corvette Z06 Z07 C7 Wicker Spoiler Conversion Kit (Stage 1to2)

    2015-2019 C7 Corvette Z06 Z07 Wicker Spoiler Conversion Kit

    $299.99
    One of the best-looking features that GM added to the C7 06 is the stage 2 and stage 3 aero package. The large front winglets and aggressive looking wicker bills on the rear spoiler really give the C7 Z06 a menacing appearance. But what are you going to do if you do not have a stage 2 or 3 Z06 but you like that aggressive look? ACS has developed this wicker conversion kit that will give your stage I Z06 the aggressive look of the stage 2 and stage 3 Z06. This conversion kit bolts quickly and easily to your factory rear spoiler and will give your car the aggressive look that you are after. The benefits If downforce is your wish then the Stage 2 Rear Spoiler Conversion kit is a must for your Stage 1 Z06. Package includes 2 larger spoiler end wickers to replace the original Stage 1 Smaller wickers found on the Z06. Complements existing components  Parts are made in ABS-PC plastic injection and painted ‘Carbon Flash Black’ specifically in order to match the Z06's other trim parts, including the Hood Insert, Rear Quarter Ports, Diffusers and Fender Inserts. Once fitted, you will wonder why it wasn’t always there. Easy and clean install Our kit can be installed with NO mods, using the stage 1 wicker, simply remove the current wicker and install the new larger setup.  This kit is for the 2014 -17 C7 Corvette Z06 with Stage 1 or Level 1 Aero package.  Application GuideC7 Z06Application: 2015, 2016, 2017, 2018, 2019 C7 Corvette Z06
  • 2010-2013 Camaro Rear Bumper Side Extensions by ACS

    2010-2013 Camaro Rear Bumper Side Extensions by ACS

    $259.99
    The new ACS 2010-2013 Camaro side bumper extensions are designed to finish out the aggressive look your Camaro deserves. The rockers are molded in our RTM composite process, which gives the component a smooth finish on both sides. This process enables a higher quality piece with an added clean smooth look for safe cleaning and an OEM appearance. Fits all Camaros except ZL1. These 2010-2013 Camaro Rear bumper extensions are mounted to the rear bumper using the supplied mechanical fasteners. No 2-way tape or messy adhesive. Installs in 30 minutes. The kit includes: *Passenger Side Bumper Extension *Driver Side Bumper Extension *6 Scrivets *Instructions These Camaro rear bumper extensions come in primer finish and all body colors. Primer finish ships the same day, pre-painted body colors are done to order and take additional time to ship.APPLICATION: 2010, 2011, 2012, 2013 Camaro
  • 2016-2023 6th Generation Camaro SS,LT,LS ACS Side Rockers

    2016-2023 6th Generation Camaro SS, LT, LS ACS Side Rockers 48-4-005

    $449.00
    2016-2023 6th Generation Camaro SS, LT, LS ACS Side Rockers 48-4-005 Side Rockers For The 2016-2023 Camaro - A Perfect Design Beyond Improvement! Improve the lateral airflow of your Camaro while protecting the side bodywork from rock chipping. These brand new side rockers offer a complete compatibility with our Gen6 Splitter the splitters. Rockers are manufactured in ACS's proprietary OEM validated RTM Composite Process. It means the process has been tested and proven to withstand stringent durability standard set by your car's manufacturer, the result; a superior made product designed and tested to last.  The ACS Rockers are installed over your current rocker panel, they will fit the Camaro SS V8, V6 and I4, coupe and convertible models without the GM aero package. The installation process is simple, takes just 30 minutes per side to install. There is no use of filthy adherent or two-way tape or removal of any components from your Camaro.  What Is The Importance Of Side Rockers? Airflow management and rock chip protections. The Brand New Side Rockers directly fit on the OEM rocker panels. This rocker panel plays a vital role to ensure the side bodywork is not eroded from the sticky front performance tires. You will quickly realize their sticky nature is great for its enhanced handling but will compromise the paint finish of your car. The Brand New Side Rockers For The 2016-2023 Camaro featuresStrengthens aerodynamics Gives an aerodynamic shape to the car, which reduces the tremendous air resistance during high-speed driving. Most likely the most surprising feature; Maintains vehicle's ride height.  Enhanced rock chip protection by covering the side bodywork from rocks and pebbles projected from the spinning front tires.  Increased under-carriage surface; the non-visible portion of the car is double to fully covered the body colored rocker of your car. The underside of rocker coated with a bed liner type material for a clean and durable undercarriage for years to come. The kit is included with following items:Rocker Panel –Passenger side Rocker Panel - Driver side 18 Aluminium Black Split Rivets  Set of InstructionsAvailable FinishesBlack Primer with undercoating paint on inner surface Carbon Flash Metallic Black undercoating paint on inner surfaceApplication: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 CamaroApplication: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 Camaro
  • C7 Corvette Base and Z06 ACS Splitter With Undertray 45-4-059

    2014-2019 C7 Corvette Base and Z06 ACS Splitter With Undertray 45-4-059

    $599.00
    If you're driving around it 2014 through 2019 C7 Corvette, Grand Sport, or Z06 and you want the ultimate in a new front chin splitter then you have found your stopping point to what can seem like an endless search. The ACS Composite 45-4-059 front splitter is a Z06 style and identical to the similar optioned from the factory by GM on the Z06 Corvette C7 that includes a functional undertray.This front splitter is manufactured by all the highest standards with the tightest tolerances in the absolute best finishes available. If you want a Corvette chin splitter that will not only look great but function both on the road and on the track that this definitely the chin spoiler for you. Introducing the ACS-Z06 Splitter for both the Stingray and Z06 C7’s. The C7 front end is already stunning, many say it is perfect, for most enthusiast a front splitter is the ultimate add-on bringing the car to a new level of perfection. The new ACS-Z06 Splitter is derived from the Z07 package GM spent tremendous time aero-testing. Don’t let this fool you; this is no knock off part. Redesigned in Cad and CNC machined, the ACS-Z06 Splitter is designed from the ground up. It does share the same styling cues and produced in ACS’s proprietary RTM manufacturing process following the tightest quality standards, and of course with a few slight improvements in design and costing. If you own a Z06 or a Stingray, you will have the choice to add our optional enhanced undertray, which is molded to the splitter. This is done for several reasons; most importantly to enhance aerodynamics by keeping all edges smooth and directing air with the minimum amount of turbulence or distractions. A great side benefit is also increased strength to better live through the dreadful driveway scrape. The changes don’t end here, we also revised the brake cooling ducts and added extra mounting points will linear fins, again to help keep airflow as laminar as possible. Winglets have over the last few decades been used by both commercial and corporate jets. Jet designers have long known that airflow off the end of a wing caused drag. With the implementation of the winglet, airflow was improved and planes moved more efficiently. The same principle applies to the latest Corvette Winglets / Deflectors line. Optional Reflectors: Every splitter package will include small end cap to block the holes in the event no deflectors are installed. A clean elegant option if deflectors are not your thing. Our S2, similar to the Z06 Stage 2 deflectors, are the smallest and conservative option. For aero-performance and a bold look, the S3 is the choice to consider. Specific deflectors are available for both the Z06 and Stingray. The ACS-Z06 S3 Deflector is also manufactured in RTM composite, available in Primer or Carbon flash black and mirroring the Stage 3 GM offering found on the Z07 package. The ACS-Stingray S3 Deflector is the jewel of our latest splitter line, specifically designed to fit the non-wide bodied Stingray, it is exclusive to the Stingray for enhanced brake cooling and a bold new look honoring it’s bigger brother, the Z07.     Application: 2014, 2015, 2016, 2017, 2018, 2019 C7 Corvette, including base, Grand Sport and Z06
  • 2016-2023 6th Generation Camaro Color Matched ACS Rear Deck Spoiler

    2016-2023 Camaro Color Matched ACS Rear Deck Spoiler

    $540.55
    Camaro SS 2016-2023 Gen6 Rear Deck Spoiler  So with the new 2016-2023 Camaro SS you bought it has a rear spoiler, well you don't want to be like everyone else so you have to look for a different one. No more looking we have your answer. We have taken the original ACS spoiler and color match painted it to your favorite color of your 2016-2023 Camaro. With the announcement of the Sixth Gen Camaro, ACS quickly began working to enhance an already incredible aero-efficient automobile. It only seemed fitting to take what we learned and apply it to the latest Camaro. Echoing the sleek, sporty design of our Aeropacks and with subtle tweaks, ACS created a spoiler to seamlessly enhance the already menacing rear end and fastback profile of Chevrolet’s latest pony car. The ACS design team worked their magic, implementing a whole new Rear Deck Spoiler that complements the trademark strong and sophisticated lines of this 6th gen vehicle; An integrated profile hugging the side arches of the Camaro, a central reverse-mohawk following the roof line, and of course, and integrated molded wicker for downforce.  Specifications:Manufactured in ACS’ trademark OEM-validated RTM composite material Designed to enhance downforce Comes fully primed to be painted, or top coated in a sleek Carbon Flash Metallic Black.  Will fit Convertible and Coupe models Direct bolt on with no required modifications.  Color matched to carApplication: 2016, 2017, 2018, 2019, 2020, 2021, 2022, 2023 Camaro Coupe, Convertible.
  • 2010-2013 Camaro ACS Rear Decklid Trunklid Liner 33-4-069

    2010-2013 Camaro ACS Rear Decklid Trunklid Liner 33-4-069

    $151.05
    2010-2013 Chevrolet Camaro ACS Rear DeckLid Liner. The ACS Camaro rear trunk panel will replace your stock felt liner in a matter of minutes.Chane the look and feel of your Camaro colors with a paintable smooth trunk liner. Integrated optional LED light to help you sort your luggage dark road trips and of course to showcase your Camaro trunk emblem.Made in ACS's RTM composite material, and sold in a primer finish that comes ready to paint.Optional LED lights, a dual or single high power LED lighting system.Note: Does not fit convertible.Additionally, you will need to reuse your OEM push pins for installation.
  • C7 2014-2018 Corvette ACS Rear Lower Bumper Diffuser Fins

    C7 2014-2019 Corvette ACS Rear Lower Bumper Diffuser Fins

    $189.00
    Give your C7 2014-201 Corvette Stingray a more aggressive look with these rear diffuser fins. Like all ACS products, these diffuser fins are built to the highest quality standards that meet GM's OEM equipment requirements. These diffuser fins are made to go on the right and left side of the diffuser as shown in the picture. Sold as a set of two fins. Application: C7 2014, 2015, 2016, 2017, 2018, 2019 Corvette
  • 2010-2013 Camaro T2 ACS Front Fascia

    2010-2013 Camaro T2 ACS Front Fascia

    $996.55
    A new front fascia will provide your Camaro with a radically improved custom look that enhances both the aggressiveness of the vehicle in stance as well as performance. This complete T2 kit, especially when coupled with the T2 Front Splitter, is a powerful and beautiful front fascia that provides OEM quality and fitment with aftermarket styling and performance. Increased size, aggressive intake ducts help pull more cool air in to the engine bay for a more efficient running engine. The aerodynamic properties of the fascia and splitter also help improve drag and downforce numbers of the Camaro for enhanced handling and track times. Ultimately, though, these improvements are all secondary to the incredible visual improvement that the T2 bumper offers. Elegant, powerful, aggressive, and stout -- the T2 Front Fascia will make your Camaro stand out even more from the crowd.  The ACS T2 fascia is a replacement front bumper with NO intake slot. Aggressive cooling ports are installed on a genuine GM part, T2 bumper completes the look without lowering the ride height. If you are a Camaro SS owner looking for extra engine cooling we recommend the complete T2 bumper assembly with the optional T2 Splitter with Cool-Rad for increased airflow performance.  The ACS fascia is a modified Genuine GM part. Each part is robotically trimmed and assembled in a dedicated fixture. Particular design characteristics are incorporated in the assembly to insure compatibility between the various materials.  Because of the size and weight of this package and freight shipping constraints, shipping is flat rate freight $250 to any business address within the Continental 48 States. For shipment outside of this area, please call our office to work out the details. Fascia comes gel-coated and ready for painting.  Please select your Camaro T2 Front Fascia options from the drop-down menus below. LED Lights and Day Time Running Lights can not be used together.
  • 2010-2013 Camaro SS RS LT Hood insert by ACS

    2010-2013 Camaro SS RS LT Hood insert by ACS

    $521.55
    Introducing the TL1 Hood Insert self-install kit, the coolest way to upgrade your STOCK Hood. That's right, modify your Aluminum Hood and save on re-paint and the hassles with replacement hoods. The ACS TL1 Hood Insert self install kit pays homage to the Zl1 while matching the lines of the existent stock hood of your Camaro.Other than its lightness the original Camaro Hood does not offer any performance advantages, until now that is. Install the Tl1 Hood Insert to extract the engines hot air, and reduce body lift at high speed by relieving under hood pressure. Trim your hood following our guide and templates, rest assured every trimmed edge will be covered (Margin of error, +/- 1/8'' outer). Hood insert kit includes a water management system draining the water towards the front radiator support away from critical engine electronics. For extreme events like racing, you can easily remove the deflector for an optimum suction effect.Insert is made in ACS's proprietary RTM process and is shipped in a primer finish ready for prep and paint. Unlike conventional fiberglass ACS's RTM process has been tested to withstand heat and distortion. Stock hood will need to be trimmed and 6 mounting holes will need to be drilled. Includes the Insert, rain water deflector, mounting hardware, octagonal grill mesh kit powder coated black and templates.Reduce body lift and engine heat by upgrading your Camaro Hood while saving on repainting or heavy cost associated with replacement hoods.Includes:  1 - ACS TL1 Hood Insert  1 - ACS Tl1 Water Deflector  1 - Front Passenger Side Hood Grill, Octagonal Mesh  1 - Rear Passenger Side Hood Grill, Octagonal Mesh  1 - Front Driver Side Hood Grill, Octagonal Mesh  1 - Rear Driver Side Hood Grill, Octagonal Mesh  6 - M6 Nut with Mounted Washer  3 - M6 U nut  3 - M6 Bolt  2 - Large Washers  4 - Standard Washers  2 - Cap Plugs  1 – Tl1 Template  1 - Adhesive Cartridge  4 – Tie Wraps  1 - Instructions
  • 2014-2015 Camaro ACS Side Rockers 46-4-005

    2014-2015 Camaro ACS Side Rockers 46-4-005

    $331.55
     The new ACS Camaro side rockers are designed specifically for the 2014-2015 model and our T4 Splitter. The rockers are molded in our RTM composite process, which gives the component a smooth finish on both sides. This process enables a higher quality piece with an added clean smooth look for safe cleaning and an OEM appearance. Fits all Camaros except ZL1.  For an added unique and functional rocker, install alongside the ACS Side Rocker Winglet (33-4-125)Will not lower the ride height of the vehicle Enhance the aerodynamics of the car at high speeds Can be installed with several other splitters on the market The rockers are mounted to the original OEM rocker panel using supplied mechanical fasteners. No two-way tape or messy adhesive. Installs in 30 minutes.The kit includes: Passenger Side Rocker Panel Driver Side Rocker Panel 18 Rivets InstructionsApplication GuideCamaro 2014-15 SS V8 Camaro 2014-15 LS LT RS V6Application: 2014-2015 Camaro
  • Cadillac ATS Side Skirts Rockers by ACS

    Cadillac ATS Side Skirts Rockers by ACS

    $474.05
    Cadillac ATS Side Skirts Rockers Set by ACS The Cadillac brand has always represented luxury and with the ATS Cadillac have realised that luxury should not come at the expense of performance. Here at ACS we agree and adding our aerodynamic and stylish Side Rockers is a fine start!   Fully prepped and primed our ACS Side Rockers are smoothly moulded using an RTM composite process that banishes rough edges on either side.   The installation process takes only 30 minutes per side, using the mechanical fastener kit supplied and avoiding the use of messy adhesives or even double-sided tape.   The Cadillac-ATS Side Rockers carry the following features as standard:   Manufactured in an OEM-validated RTM composite material Enhances your car’s aerodynamics at high speeds Will not lower the ride height of the vehicle Smooth finish to both sides that looks and feels good, and facilitates easy cleaning Mounted to the original OEM rocker panel Installation kit including (Passenger/ Driver Side Rocker Panels, 18 Scrivets, 16 U-nuts & Bolts, Easy Instructions). Compatible with several other splitters on the market Optional satin black paint finish

1-48 of 60

Page:
  1. 1
  2. 2

Grid List

Set Descending Direction
Advanced Composite Specialties

Minimal Price: $ 94.05 94.05

X