BMR


8 Item(s)

Grid List

Set Descending Direction
  • 2010-2013 Camaro Adjustable Toe Rods

    2010-2013 Camaro Adjustable Toe Rods

    $229.95
      Eliminate toe deflection in your 2010-2013 Camaro with Adjustable Toe Rods.  Manufactured from 1.25” diameter x .095” wall DOM tubing and QA1 Teflon-lined, chrome-moly XR series rod ends, these race version toe rods provide increased adjustability for lowered cars.  The BMR Adjustable Toe Rods (TR004) promote more predictable handling on the road course as well as increased straight line stability at the drag strip making this product a no-brainer for the hardcore enthusiast.  Instructions provided for an easy installation time of only 1 hour.  Available in Black hammertone or Red powdercoat.
  • 2010-2015 Camaro Driveshaft Safety Loop

    2010-2015 Camaro Driveshaft Safety Loop

    $129.95
    NHRA safety regulations require a front driveshaft safety loop for any vehicle running faster than 12.99 in the quarter mile. The Fifth generation 2010-2015 Camaro practically does that right off the showroom floor! BMR builds their bolt-in loops from NHRA legal 1/4" steel and the unique design bolts into place using 2 existing mounting bolts and 2 new ones provided with the kit. Installation is simple and can be performed without removing the exhaust. Get yours today from Southern Car Parts and be ready for race day! Application: 2010, 2011, 2012, 2013, 2014, 2015 Camaro
  • 2010-2013 Camaro SS Strut Tower Braces

    2010-2013 Camaro SS Strut Tower Braces

    $274.95
    Free Shipping
    The fifth generation of Chevrolet's F-body is GM's most rigid platform to date however that doesn't mean it can't be improved upon. Strut towers are subject to more load than most people realize and even normal everyday driving can deflect the towers a measurable amount. Aggressive driving, and especially track driving, can move the towers around enough to create erratic handling inconsistencies and temporary alignment drift. Most of this load is directed inward as the strut/spring compresses and attempts to close the distance between the two towers. This front Strut Tower Brace reinforces the front end by tying the two strut towers together, effectively canceling tower deflection. Our Strut Tower Brace is manufactured from large diameter 1.75" x .120" tubing with heavy duty 1/4" thick mounting plates. Our braces mount directly to the top of the strut towers at the highest leverage point for the greatest amount of stability. The upper strut retainer is replaced with BMR's billet aluminum, high clearance retainer. The 4 point Strut Tower Brace goes a step further by tying the front fenders and core support together with the strut towers. Our 4 point links are made from 1" DOM tubing and use heavy duty 1" clevises and QA1 rod ends. Both versions are available in Red or Black hammertone powder coat. NOTE: Does not fit V6 models. Only fits the 2010-2013 V8 Camaro. Does not fit any other model years. APPLICATION:  2010, 2011, 2012, 2013 Camaro
  • 2010-2013 Camaro Trailing Arms

    2010-2013 Camaro Trailing Arms

    $139.95
    Stabilize caster settings and minimize wheelhop in your Fifth generation Camaro with a set of trailing arms from BMR Fabrication. Superior to the factory stamped steel arms, these Trailing Arms are fabricated from 1" x 2" rectangular steel and 3/16" CNC laser cut and CNC formed steel plates. Part number TCA026 utilizes fully fluted, greaseable, low deflection polyurethane bushings rather than the poorly supported rubber bushings of the factory design. Part number TCA027 uses low friction Teflon-lined spherical bearings for an even smoother and stronger control. Installation time with these is only 1 hour. Available in black hammertone or red powdercoat.
  • 2010-2013 Camaro Toe Rods

    2010-2013 Camaro Toe Rods

    $119.95
    The toe rod is responsible for maintaining toe settings of the the rear wheels similar to tie rod ends on the front end. This ensures that the wheels remain set to a fixed position, not erratically pointing inward or outward under loading. The factory rods are made from flimsy stamped steel and use soft rubber bushings at the mounting points. Under load, deflection can cause poor launch stability, inconsistent handling and decreased braking ability. These toe rods are made from heavy duty 1" x 2" heavy wall DOM and use our spiral fluted, low deflection polyurethane bushings. Quick and easy install with no decrease in ride quality. For further adjustability than offered in the nonadjustable design, we also offer two versions of adjustable Toe Rods. Both variations are manufactured from 1.25" heavy duty DOM tubing and both are double-adjustable, meaning that they can be adjusted while on the vehicle. The polyurethane version uses a heavy duty 3/4" chrome moly double adjuster while the rod end version uses QA1's XR series chrome moly, Teflon-lined rod ends. Both versions install easily and provide no decrease in ride quality. Available in black hammertone or red powdercoat.
  • 2010-2013 Camaro Adjustable Tubular Sway Bar Kits

    2010-2013 Camaro Adjustable Tubular Sway Bar Kits

    $189.95
    Swaybars are one of the most noticeable handling improvements you can install on your 2010-2013 Camaro. From the factory, GM did a decent job with spring rates and swaybars but the Camaro begs for more roll resistance to counteract the car's excessive weight. BMR recognizes this need and has a solution that not only increases roll resistance but does so with very minimal decrease in ride quality. BMR takes advantage of today's technology by manufacturing it's swaybars from tubular steel, a process started in Europe and adopted by most current auto manufacturers today. All BMR swaybars are cold formed, a chosen manufacturing process that doesn't involve heat, resulting in more consistent "memory" retention. A key feature in BMR's swaybar design is the adjustable rates, allowing multiple settings for varying driving styles. From the factory there is an inherent understeer in this Camaro platform. Rather than just make larger OE bars with the same problem, BMR's solution is biased front-to-rear roll resistance, resulting in a neutral overall balance. For instance, by simply replacing the rear bar only and using the first hole, you effectively neutralize understeer without changing overall roll resistance. Adding the front bar and choosing a stiffer rear setting increases overall roll resistance. FRONT     REAR   Hole 1 98% stiffer than OE bar   Hole 1 99% stiffer than OE bar Hole 2 146% stiffer than OE bar   Hole 2 173% stiffer than OE bar Hole 3 214% stiffer than OE bar   Hole 3 301% stiffer than OE bar Countless hours were put into developing and testing the ideal rates for our bars, taking this platform to a whole new level of driving excitement! Available in black hammertone or red powdercoat finishes.
  • 2010-2015 Camaro Driveshaft Tunnel Brace

    2010-2015 Camaro Driveshaft Tunnel Brace

    $89.95
    Strengthen the floor pan and drive shaft tunnel in your 2010-2015 Camaro with a Driveshaft Tunnel Brace from BMR Fabrication and Southern Car Parts. Constructed from 1" x 2" x .083 wall rectangular steel and 3/16" CNC laser cut steel plates, these braces replace the factory stamped steel design. The BMR Driveshaft Tunnel Brace (DTB004) uses factory mounting holes while increasing the rigidity of the tunnel in the critical area where the driveshaft carrier bearing is located. Available in black hammertone or red powdercoat finishes, please choose above. Application: 2010, 2011, 2012, 2013, 2014, 2015 Camaro
  • 2010-2013 Camaro Subframe Connectors

    2010-2013 Camaro Subframe Connectors

    $349.95
    Stiffen up the chassis for greatly improved handling with Sub Frame Connectors from BMR Fabrication. Constructed of 1" x 1" x .120 wall rectangular tubing and 3/16" CNC laser cut and formed steel plates, these Sub Frame Connectors use pre-existing bolt holes on the Camaro for a truly bolt-on piece. The triangulating design stiffens and reinforces the chassis by joining three key areas of the vehicle's chassis: the front sub frames, carrier bearing location, and the rear sub frame where the rear suspension cradle mounts. By fastening these three locations, the Sub Frame Connectors (SFC015) enrich the handling and response of your Camaro. New hardware is provided for an easy installation time of only one hour. Available in black hammertone or red powdercoat finishes.

8 Item(s)

Grid List

Set Descending Direction
BMR

Minimal Price: $ 89.95 89.95