CEI


19 Item(s)

Grid List

Set Descending Direction
  • C5-C6 Corvette Air Fuel Gauge Wiring Pigtail

    C5-C6 Corvette Air Fuel Gauge Wiring Pigtail

    $17.95
    Used on OBD I and II applications using the four-wire sensors. This harness allows an aftermarket air-fuel gage to be added to your current front oxygen sensor signal, with complete plug-in capability. Signal wire exits the plug-in assembly and allows the addition of wire for your gage without cutting up your factory harness. Application: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette Application: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 C5 Corvette
  • C5 1997-2004 Corvette Headlight Pigtail

    C5 1997-2004 Corvette Headlight Pigtail

    $25.95
    Sometimes the most inexpensive reproduction parts aren't necessarily the best reproduction parts. We try to do both wherever possible, this C5 1997-2004 Corvette Headlight Pigtail is no exception. Replace your current Headlight Pigtail on your Corvette C5 with this part from CEI brought to you by Southern Car Parts. Application: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 C5 Corvette
  • C5 1997-2002 Corvette LS1 MAF to 3800 MAF Pigtail

    C5 1997-2002 Corvette LS1 MAF to 3800 MAF Pigtail

    $25.95
    This 108099 Plug-in adapter from CEI and Southern Car Parts is designed to adapt the current LS1 5-wire Mass Airflow Sensor to the GM 3800 Supercharged and NA engines, 1996-2002. Plug-in adapter has no provision for Airtemp Sensor, so only 3 of the 5 terminals on the LS1 MAF sensor are used. Application: C5 1997, 1998, 1999, 2000, 2001, 2002 Corvette    
  • C5 1997-2004 Corvette Euro Headlight Harness 9005/9006 Conversion to H4

    C5 1997-2004 Corvette Euro Headlight Harness 9005/9006 Conversion to H4

    $123.95
    This kit is a plug-and-Play harness from CEI using sealed relays and OEM connections designed to drive AND brighten the headlight system for your C5 Corvette using the H4 EURO spec headlamp housings. This system attaches to the alternator stud or battery positive junction and increases brightness by as much as 30%! and is a necessary addition when using high wattage H4 bulbs. Sealed relays included. This top quality kit from Southern Car Parts uses all OEM wiring and connections. Application: C5 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Corvette
  • C5-C6 Intake Air Temperature Harness Extension 36"

    C5-C6 Intake Air Temperature Harness Extension 36"

    $25.95
    If you have ever installed an aftermarket cold air intake into your Corvette only to discover that the IAT sensor was moved and now your harness cannot be plugged back in. You cannot cut and splice oxygen sensor wiring since this can permanently damage the sensor and considerably reduce accuracy of the signal. This extension is "Plug-And-Play" and utilizes OEM connectors, terminals and seals with OEM wiring to maintain precisely accurate signals and safely extend the wiring connections.  Note: Please check your connector shape and color to see if it matches your application. Application: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette Application: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 C5 Corvette
  • C5 Corvette O2 Sensor Extension FLAT

    C5 Corvette O2 Sensor Extension FLAT

    $25.95
    When installing aftermarket headers and cat-back systems in your vehicle, the oxygen sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut and splice oxygen sensor wiring since this can permanently damage the sensor and considerably reduce the accuracy of the signal. These extensions are "Plug-And-Play" and utilize OEM connectors, terminals and seals with OEM wiring to maintain precisely accurate signals and safely extend the wiring connections. Note: Please check your connector shape and color to see if it matches your application. Application: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 C5 Corvette
  • C5-C6 Corvette O2 Sensor Wiring Extension Square Plug

    C5-C6 Corvette O2 Sensor Wiring Extension Square Plug

    $25.95
    When installing aftermarket headers and cat-back systems in your vehicle, the oxygen sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut and splice oxygen sensor wiring since this can permanently damage the sensor and considerably reduce the accuracy of the signal. These harness extensions are "Plug-And-Play" and utilize OEM connectors, terminals and seals with OEM wiring to maintain precisely accurate signals and safely extend the wiring connections. Note: Please check your connector shape and color to see if it matches your application. Application: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 C5 Corvette Application: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette
  • C6 Corvette O2 Extension C6 Corvette

    C6 Corvette O2 Sensor Extension

    $27.49
    When installing aftermarket headers and cat-back systems in your vehicle, the oxygen sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut and splice oxygen sensor wiring since this can permanently damage the sensor and considerably reduce the accuracy of the signal. These extensions are "Plug-And-Play" and utilize OEM connectors, terminals and seals with OEM wiring to maintain precisely accurate signals and safely extend the wiring connections. Note: Please check your connector shape and color to see if it matches your application. Application: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette
  • C6 Corvette /Camaro O2 Sensor Extension

    C6 Corvette /Camaro O2 Sensor Extension

    $25.95
    When installing aftermarket headers and cat-back systems in your vehicle, the oxygen sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut and splice oxygen sensor wiring since this can permanently damage the sensor and considerably reduce accuracy of the signal. These extensions are "Plug-And-Play" and utilize OEM connectors, terminals and seals with OEM wiring to maintain precisely accurate signals and safely extend the wiring connections. Note: Please check your connector shape and color to see if it matches your application.
  • C6 Corvette RTD Sim C6 Corvette

    C6 Corvette Real Time Dampening Simulators

    $179.99
    Free Shipping
    ELIMINATED MIL LIGHT AND ASSOCIATED CODES WHEN REPLACING FACTORY SHOCK ABSORBERS. The active suspension F55 RTD (Real Time Dampening) is an awesome option for the C6 Corvette. Soft while cruising down the street and then it firms when you really want to enjoy the handling your Corvette was designed for. But suspension technology has come a long way since your C6 Corvette rolled out from the factory or you are upgrading your car for more track orientated performance. But you then discover when replacing your factory dampening shocks just how much replacements cost. You are "shocked" when you discovered that the cost of ONE factory shock could enable you to replace ALL FOUR shocks with the best aftermarket shocks! If you do this, however, the MIL (Malfunction Indicator Light) turns on and the car's top speed is limited to 80 MPH! By using our kit, you can then choose any shock absorber or coil over suspension that suits your needs, and turn the MIL codes off, restoring the car to its original performance. Our Real Time Dampening Simulators Kit consists of eight modules, two for each wheel location. Simple "Plug-And-Play" installation takes only a few minutes and requires no cutting to your factory harness. Application: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette
  • C5 Corvette Euro Tail Light Harness

    C5 Corvette Euro Tail Light Harness

    $89.95
    Plug-and-Play kit that provides correct lighting for the EUROPEAN taillight housings, available from GM. Comes complete with AMBER bulbs. OEM quality and performance.   Application: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 C5 Corvette
  • C5 C6 1997-2013 Corvette Valve Cover Breather - LS1 & 3800

    C5 C6 1997-2013 Corvette Valve Cover Breather - LS1 & 3800

    $49.95
    Take a look at this C5 C6 1997-2013 Corvette Valve Cover Breather - LS1 & 3800 from Southern Car Parts. This is a chrome top Breather Assembly with billet base. A bayonet-type lock attaches it securely to the valve cover. Used on the LS1 GM engine and Supercharged 3800 Series II engine. The bayonet twist-lock mounts securely and seals with an O ring. Adds a functional flair to your engine compartment. Application: C5 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, C6 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 Corvette
  • C6 Corvette  LS2/LS7 Throttle Body (ETC) Extension - 24"

    C6 Corvette LS2/LS7 Throttle Body (ETC) Extension - 24"

    $47.95
    If you are looking to tap into the LS2 / LS7 Electronic Throttle Control cable for nitrous, supercharger or turbo upgrades to your Corvette that require you to cut the OEM wires and lengthen this connector but you do not want to hack up your factory harness. Well, you will not have to cut any longer! CASPER'S ELECTRONICS proudly announces the availability of the GT 6 Way throttle cable mate connector. This connector is built to OEM specification materials rated for underhood connections. Completely plug-and-play connections!  Application: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette
  • C5 1997-2004 Corvette LS2 Throttle Body To LS1 Throttle Body Harness Adapter

    C5 1997-2004 Corvette LS2 Throttle Body To LS1 Throttle Body Harness Adapter

    $57.95
    With this harness from CEI and Southern Car Parts, you can now use an LS2 throttle body on an LS1 vehicle. This harness is comprised of OEM connectors, terminals, locks, and seals to allow complete plug and play installation and adaptation. All wire is high-temperature automotive spec as well as stock appearing split loom tubing. Application: C5 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Corvette
  • C5 1997-2002 Corvette Fuel Pump Hotwire Kit

    C5 1997-2002 Corvette Fuel Pump Hotwire Kit

    $71.95
    This C5 1997-2002 Corvette Fuel Pump Hotwire Kit from CEI and Southern Car Parts allows you to replace the stock, inadequate 18 gauge wire with a new 12 gauge feed using all OEM plug and play connectors! No wires to cut! This kit will increase the voltage at the fuel pump on average 2.5 volts. Make the most out of your aging factory or new aftermarket pump with this fuel pump hotwire kit! Application: C5 1997, 1998, 1999, 2000, 2001, 2002 Corvette
  • C5-C6 Corvette 24" O2 Sensor Extension Harness

    C5-C6 Corvette 24" O2 Sensor Extension Harness

    $26.95
    When installing aftermarket headers and cat-back systems in your vehicle, the oxygen sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut and splice oxygen sensor wiring since this can permanently damage the sensor and considerably reduce the accuracy of the signal. These extensions are "Plug-And-Play" and utilize OEM connectors, terminals and seals with OEM wiring to maintain precisely accurate signals and safely extend the wiring connections. Note: Please check your connector shape and color to see if it matches your application. Sold individually, some applications require two Application: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette Application: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 C5 Corvette
  • C5 C6 1997-2013 Corvette Fuel Pump Hotwire Wiring Kit

    C5 C6 1997-2013 Corvette Fuel Pump Hotwire Wiring Kit

    $71.95
    This C5 C6 1997-2013 Corvette Fuel Pump Hotwire Wiring Kit from CEI and offered by Southern Car Parts is designed to install into your C5 or C6 Corvette to overcome the losses associated with your factory wiring harness to the fuel pump. Because of the heavy 12 gauge feed, sealed relay and attachment to the output stud of the alternator, extra voltage and current become available to the fuel pump, increasing both fuel volume and pressure during WOT, when it is needed most. Southern Car Parts has everything you need to make sure your C5 or C6 Corvette looks great and keeps running strong. Aftermarket Pumps will not work with this wiring kit Application: C5 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, C6 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 Corvette
  • C5 Corvette Knock/Cam Harrness LS1 tlo LS2/LS7 All in one

    C5 Corvette Knock/Cam Harness LS1 tlo LS2/LS7 All in one

    $54.95
    Cam Harness: This harness allows the cam sensor used on the front of a LS2 motor to be plugged into the LS1 cam sensor connector located at the back of the intake manifold. This harness is perfect for LS2 motor conversions. Compatible with the PCM harness in LS1 Corvette and F-Body cars. Knock Harness:This harness allows the single-wire LS1 knock sensors located on top of the LS1 manifold to be relocated on both sides of the LS2 block and plugged into the factory LS1 PCM harness. It has the perfect added length and thermal protection required to be routed near hot exhaust manifolds. Compatible with the PCM harness in LS1 Corvette and F-Body cars.   Application: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 C5 Corvette
  • C5 1997-2004 Corvette Cam Harness LS1 - LS2

    C5 1997-2004 Corvette Cam Harness LS1 - LS2

    $25.95
    This 40 inch C5 1997-2004 Corvette Cam Harness LS1 - LS2 from Southern Car Parts allows the cam sensor used on the front of a LS2 motor to be plugged into the LS1 cam sensor connector located at the back of the intake manifold. This harness is perfect for LS2 motor conversions. Compatible with the PCM harness in LS1 Corvette and F-Body cars. - Fully Plug and Play with the factory connector & sensor - High-temperature (300F) Nylon loom remains flexible while not melting sitting on top of the motor Application: C5 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 Corvette

19 Item(s)

Grid List

Set Descending Direction
CEI

Minimal Price: $ 17.95 17.95

X