Dynamat


1 Item(s)

Grid List

Set Descending Direction
  • C5 Corvette Dynamat Kit

    C5 Corvette Dynamat Kit

    $1,339.60
    Wanna get rid of road noise and improve your stereos sound? Dynamat is the ultimate in noise reduction technology. This is a complete Dynamat kit for the Corvette C5  (all models). Comes with enough material to install Dynamat on both doors, driver and passenger floor, and rear hatch. Cutting of the Dynamat is required.  Dynamat Xtreme is a patented, lightweight elastomeric butyl and aluminum constrained-layer vibrational damper. Dynamat Xtreme conforms and fuses easily to sheet metal and other hard substrates. Material performance is optimized for temperature ranges between 14°F and 140°F (- 10°C to +60°C). The material can withstand temperature extremes between -65°F and +300°F (-54°C to +149°C) and is highly resistant to aging.   Acoustic Properties: The acoustic loss factor "n" is used as a measure of a material's ability to damp structure-borne sound by stating how much vibrational energy (in steel sheets for instance) is converted to heat rather than sound. For constructions containing several layers of damping material, the combined loss factor "n comb" is used. The theoretical maximum loss factor is 1 (no vibration). An undamped 1mm thick steel panel has a loss factor of roughly 0.001 at 200 Hz. Dynamat Xtreme applied to that panel would increase the loss factor to 0.417 @ +20°C (+68°F). Multiple layers of Dynamat Xtreme improve sound damping even more.   Dynapad: DynaPad is a four-layer composite barrier that provides excellent acoustic attenuation and thermal insulation. This heavier material utilizes "Dissimilar Layer Insulating" technology that solves two of the most difficult automotive problems - exhaust system heat and low-frequency noise. DynaPad is used primarily on the floor.   Applications: Dynamat Xtreme can be die cut to shape and placed onto the body surface directly on painted panels or after the sheet metal is cleaned before painting (typically at the sealer application operation). Dynamat Xtreme is used to treat metal panels, partitions, ducts, doors, bins, panels, and so forth in railroad cars, buses, automobiles, and ships. It is also used for ventilation ducts, relay cabinets, steel furniture, home appliances, sink units, computer equipment, machine tools and many other objects that suffer from vibration-produced noise.   Installation: Use scissors, knife or die to cut Dynamat Xtreme to the desired size and shape before removing the release liner. Next, remove dust, grease, moisture, and other foreign matter from the application surface. Peel off the release liner. The simplest application technique is to bend the mat slightly and attach it along its shortest edge. Press the mat firmly into place, using a roller for larger pieces. The roller reduces the risk of leaving air pockets, which reduce Dynamat's sound damping capacity. The temperature of the mat and application surface should not be below room temperature during fitting. Heating the material is not necessary.   Corvette Dynamat Spec Sheet Listed Here   Application: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 C5 Corvette  

1 Item(s)

Grid List

Set Descending Direction
Dynamat

Minimal Price: $ 1,339.60 1339.6

X