Call Us: 888-631-1433
COUPON CODES     SCP5: $5 OFF ORDERS OVER $125    SCP25: $25 OFF ORDERS OVER $275   SCP50 $50 OFF ORDERS OVER $550
Painted Parts are painted to order and take additional time, right now we are about a 6-8 week lead time. Please keep this in mind.
  • SHOP
Fits JK 0-3.0 " Lift Front Tera44 R44 Rubicon Axle with 4.88 Ring and Pinion and OEM Locker For 0...
  • Free shipping

        Fits JK 0-3.0 " Lift Front Tera44 R44 Rubicon Axle with 4.88 Ring and Pinion and OEM Locker For 07-18 Jeep JK/JKU Wrangler TeraFlex

         
        0.0
        TeraFlex
          • 10% less
          Market price: $5298.46, you save $503.47
        • $4794.99

        OR

        TeraFlex JK Front Tera44 R44 Rubicon Replacement Axle Housings include a heavy-duty housing with axle tubes, bracketry, and forged inner knuckles, pre-installed inner seals and upper control arm bushings as well as OEM Rubicon locker, choice of Spicer ring and pinion gear ratio, Spicer bearings and install kits, TeraFlex heavy-duty ball joints, and factory yoke.

        Simply swap over axle shafts, outer knuckles, outer axle assembly, unit bearings, brakes and sensors. The comprehensive assembly makes swapping axle housings a true DIY process!

        TeraFlex heavy-duty JK Front Tera44 R44 Rubicon Replacement Axle Housings are perfect for replacing bent, broken, or damaged front axles in JK Wrangler and Rubicon vehicles. Can also be used as a direct bolt-on upgrade for JK Wrangler owners looking to beef up the front axle's weak areas.
        Fits:

        • JK Wrangler Rubicon (2-door) - front
        • JKU Wrangler Unlimited Rubicon (4-door) - front

        Includes:

        • OEM Rubicon locker
        • Spicer ring and pinion - 4.88
        • Spicer bearings and install kits
        • TeraFlex HD ball joints
        • Factory yoke

        Features:

        • 3.25 inch O.D. x 0.5 inch wall axle tube increases strength to resist bending and torsion w/ minimal weight increase
        • Pre-installed inner axle seals
        • Forged HD inner knuckles w/ greater upper and lower section strength
        • Ductile cast iron housing w/ increased rib gussets
        • HD ductile iron differential cover
        • Asymmetric housing design, for extra-long tube side strength
        • Smooth radius bottom design to glide over rocks and obstacles
        • Integrated lower flexarm skid plates
        • Bottom oil drain hole for simple fluid changes
        • Premium UV protected triple-stage powder coat process for superior corrosion resistance
        • 1/4 inch-thick CNC laser cut axle brackets for extreme strength
        • Integrated factory location upper control arm mount
        • Pre-installed upper control arm bushings
        • Reinforced front track bar mount (ties into spring pad) for greater strength
        • Proper pinion angle for lifted JK applications
        • Pre-tapped hole on spring perch for bump stop extensions
        • Pre-drilled holes for limit straps and lower spring retainers
        • Retains all JK ESP, ABS, and speedometer sensor capability
        • 100 percent engineered, designed, and built in the USA
        • 100 percent new components
        • 1-Year/Unlimited Mileage Warranty
        • Lift Height: 0-3.0 inch
        • Width: 67 inch WMS-WMS (stock)
        • Axle Tube: 3.25 inch x 0.5 inch
        • Ring and Pinion: 4.88
        • Install Time: 6 Hours

        Note:

        • The R44 axle works w/ factory axle shafts and Rubicon locker (part number 68017176AA) or part number OX D44-JKR-30 locker. The ARB RD157 locker or the # OX D44-JKR-30 locker can be used w/ new 35 spline axle shafts.

        Requirements:

        • Control Arm Upgrade
          • 0-3 inch Lift: This axle is a direct bolt-on upgrade! Although stock control arms will work at this Lift height, aftermarket flexarms may be used if desired - highly recommended w/ a 3 inch Lift.
          • 0-3 inch Lift: This axle is a direct bolt-on upgrade! Although stock control arms will work at this Lift height, aftermarket flexarms may be used if desired - highly recommended w/ a 3 inch Lift.
          • Front upper (part number 1252200) and front lower (part number 1252000) TeraFlex JK Sport Flexarms will work w/ 2.5-3 inch lifts.
          • Front upper (part number 1415520) and front lower (part number 1415500) TeraFlex JK adjustable Alpine Flexarms will work w/ 2.5-4 inch lifts.
          • Front upper (part number 1315520) and front lower (part number 1315500) TeraFlex JK adjustable Alpine Long Flexarms will work w/ 3-6 inch lifts.
        • Axle Shaft Upgrade
          • 0-6 inch Lift: High-quality aftermarket axle shafts will enhance your set up. We recommend RCV or TEN Factory high-end shafts. Stock Rubicon axle shafts may also be reused.
        • Axle Shaft Tube Seal Upgrade
          • 0-6 inch Lift: Get serious with HD 0.5 inch wall seals (part number 4354050) or keep it real with standard 0.25 inch wall seals (part number 4354025). Stock seals may also be reused.
        • Steering System Upgrade
          • 0-3 inch Lift: The JK HD Tie Rod and Drag Link Steering Kit (part number 1853900) will do the trick, though the stock steering system may be reused.
        • Brake Upgrade
          • 0-6 inch Lift: Experience a notable difference w/ a TeraFlex Big Brake Kit (part number 4303400 or part number 4303420) or JK Big Rotor Kit (part number 4303480 or part number 4303490).
          • SKU
            TER3524488
          • Weight
            265 lbs
          • Barcode
            843995048202
          • Manufacturer Part #
            3524488
        • Manufacturer
          TeraFlex
        • ASIN
          n
        • Brand
          TeraFlex
        • Configurator Products
          No
        • Configurator Status
          No
        • Covercraft Status
          No
        • Disable loading on additional products
          No
        • Disallow Use of Coupons
          No
        • GUID
          AB-3524488-PRM
        • MPN
          3524488
        • Part Number_333224
          3524488
        • Select Featured
          No
        • UPC
          843995048202
        Customer reviews
        Please sign in to add review
        There are no comments yet. Be the first to leave a comment

        We accept the following payment methods:

        Accepted payment methods

        Shipping

        We utilize UPS, Fedex, and USPS for all of our shipping needs. Carrier choice is based upon availability and needs of the customer and is the sole discretion of SouthernCarParts. We always try to ship within 24 hours of order placement (do to the custom nature of some products, shipping within 24 hours is impossible, actual shipping time frames will be listed in the product description). Please keep in mind that some products such as Custom Fit Car Covers, Lloyds Floor Mats, Painted accessories, and Racemesh Products can take 3 -10 days to ship and are charged at time of order placement. Racemesh products take 4 weeks to ship as they are made to order.

        Returns

        Should you need to return a part for refund, exchange, or credit, please contact our returns department within 30 days of purchase at orders@southerncarparts.com for a Return Merchandise Authorization (RMA) number. Most problems, such as installation, can be solved with a telephone call (888-631-1433). Southern Car Parts will not accept returned goods without prior authorization and an RMA# written clearly on the exterior of the box. The customer is responsible for freight on all return orders. Parts authorized to be returned, on a non-exchange basis, are subject to a 20% restocking fee. Returns will only be accepted within 30 days of the original date of shipment.  Custom painted parts - Once these parts are started, we can refund you less the paint(chemicals) that have been used. Exception is rear spoilers and front splitters, we can refund less 20%.

        Custom-made-to-order items are NOT returnable. This includes embroidered floor mats and car covers.
        Damages in Shipping

        All damages from shipping must be reported to Southern Car Parts within two business days from tracking number delivery confirmation. After two business days, damages become the responsibility of the customer.

        CART