Ford Raptor Interior Parts and Accessories


Ford Raptor Interior Parts and Accessories

Ford Raptor Interior Parts and Accessories

There is an extensive stockpile of cheap and sub-standard interior parts for Raptor in the market. So the buyers have to be very alert about what they buy for their ride. At Southern Car Parts, we only offer the best in quality interior parts for the Ford Raptor.


Modifying the interiors also happens to be one of the most popular ways of customization or rather the latest craze for Raptor owners. We also have a lot of customers asking us what they can do to set their Raptor apart from the rest of the crowd. Interior parts are a great way to make your car truly customized and to add to its appearance and bring it to a whole new level. Interior upgrades not only add to the beauty of your car but can improve its comfort level too. Our exclusive interior parts add an amazing appearance to your car and at the same time, the different pieces also add to the improved comfort and smoothens the driving experience.

12 Item(s)

Grid List

Set Descending Direction
  • 2010-2014 Ford Raptor 6pc Carbon/Fiberglass Door Panel Inserts

    2010-2014 Ford Raptor 6pc Carbon/Fiberglass Door Panel Inserts

    $251.96
    Free Shipping
    2010-2014 Ford Raptor 6pc Carbon/Fiberglass Door Panel Inserts Want to give your Ford Raptor a little better looking interior? Our Carbon Fiber/Fiberglass door panel inserts will certainly do that for you. These panels are made from a combination of fiberglass and carbon fiber and simply stick over top of your factory doors. These give your Raptor instant class and will certainly set your Raptor a part from the crowd. These easy to install, ultra lightweight inserts will give you long lasting appeal that will still turn heads years after you install it.   Application: 2010, 2011, 2012, 2013, 2014 Ford Raptor
  • Ford Raptor A/C Vent Trim Covers w/FORD Lettering

    Ford Raptor A/C Vent Trim Covers w/FORD Lettering

    $142.95
    Take your Raptor to a new level with these A/C Vent Trim ring covers. Give your Raptor's A/C vents the ultimate show look when you add our Ford Raptor A/C Deluxe Vent Trim Covers with Etched F-150 Lettering. These hand crafted stainless steel trim pieces come are sold as a 20 piece set with a polished finish trim with a brushed center. When you're ready to show your truck, simply close your vents for a show stopping detail that's sure to capture everyone's attention. Please note, these A/C Vent trim ring covers are custom made to order and take additional time to make and ship.  Application: 2010, 2011, 2012, 2013, 2014 Ford Raptor
  • 2012-2014 Ford Raptor Executive Style Center Dash Trim

    2012-2014 Ford Raptor Executive Style Center Dash Trim

    $89.95
    You drive the coolest truck ever made...why not make it your own? Check this stainless steel dash insert trim kit.....The Ford Raptor deserves the best trim available and that's what you'll find with each piece of Executive Style Center Dash Trim. Each piece of stainless steel is finished by hand and our Executive style features a combination of both brushed and polished finishes. Leaving you with an easy to install accessory that looks like it was the piece that Ford forgot. This trim package is made to order, so please allow additional time from order date to ship date.  Application: 2012, 2013, 2014 Ford Raptor
  • 2010-2014 Ford F150/Raptor Trailer Brake/Cubby Hole Squares 2Pc Polished

    2010-2014 Ford F150/Raptor Trailer Brake/Cubby Hole Squares 2Pc Polished

    $32.95
    2010-2014 Ford F150/Raptor Trailer Brake/Cubby Hole Squares 2Pc Polished  Dress up your Raptor with our Polished - Stainless Steel, Trailer Brake/Cubby Hole Trim Rings. These trim pieces are designed to fit around the trailer brake control and cubby hole and add a clean stylish look to your F150/Raptor's interior.  Fits all 2010-2014 Ford F150 or Raptor trucks.Description100% Stainless Steel. High Polished, mirror finish. Will not tarnish, fade or rust. Adds a unique look and style to your car. Easy "peel and stick" installation takes just minutes. Fits all 2010-2014 Ford F150/Raptor trucks. Sold as an (2) piece kit. Made in USA!. American Car Craft is a design company dedicated to developing unique high quality products. With more than thirty years of experience customizing classics, hot rods and exotic cars American Car Craft has developed a truly unique approach to the ever growing auto accessory industry. Our product line specialty is in the engine bay and emanates throughout the vehicle to include custom grilles, stainless interior and exterior trim, to state of the art digital graphics. All American Car Craft products are made from the highest grade 100% - 304 stainless steel and are backed by our customer satisfaction guarantee. Here at ACC we understand that word of mouth is the best advertising you can get, so our goal is to make sure our customers are happy. If you’re not happy, were not happy and we are committed to doing whatever it takes to make it right! So you can buy with confidence in our 100% money back guarantee  Application: 2010, 2011, 2012, 2013, 2014 Ford F150/Raptor
  • 2010-2014 Ford Raptor Front Carbon Fiber Door Sill Plates

    2010-2014 Ford Raptor Front Carbon Fiber Door Sill Plates

    $665.96
    Free Shipping
    You guys have been asking for these for quite some time....A performance machine like the Ford Raptor deserves a high quality piece of trim. We've designed these Ford Licensed door sills out of 100% carbon fiber and fiberglass to give you the ultimate in performance and visual appeal. These Front Carbon Fiber/Fiberglass Door Sills with "Raptor" Lettering feature LED illuminated letters. Making a statement whenever you open your doors for someone is exactly what you'll do with these installed. These door sill plates are sold as a two piece set and included illumination.FREE GROUND SHIPPING ON THESE RAPTOR DOOR SILL PLATES!   Application: 2010, 2011, 2012, 2013, 2014 Ford Raptor
  • 2010-2014 Ford Raptor Stainless Steel Auxiliary Switch Trim Ring Polished

    2010-2014 Ford Raptor Stainless Steel Auxiliary Switch Trim Ring Polished

    $24.26
    Why not add a little bit of an upgrade to your Ford Raptor interior? Dress up your Raptor with this 2010-2014 Ford Raptor Stainless Steel Auxiliary Switch Trim Ring Polished from Southern Car Parts. These trim pieces are designed to fit around the auxiliary switch center console controls and add a clean stylish look to your Raptor's interior. Fits all 2010-2014 Ford Raptor trucks. Please note this trim ring is made to order and takes additional time to ship out. Application: 2010, 2011, 2012, 2013, 2014 Ford Raptor
  • 2010-2019 Ford Raptor Aluminum Racing Style Pedal Covers

    2010-2019 Ford Raptor Aluminum Racing Style Pedal Covers

    $87.99
    Replacing the factory rubber pedal pard with these great looking aluminum pedal covers is an easy way to add style and performance to your truck. These aluminum racing pedals are designed and manufactured exclusively for the 2010-2019 Ford Raptor. They are made from CNC Machined aircraft quality billet aluminum and machined for the ultimate style and finish. They are available in several different machined finishes. These pedals equate to the ultimate in both style and function. They are machined for ultimate grip and designed for a premium race-car like shifting experience. These pedal sets are designed to improve the racing drivability of your Raptor while also giving it a fantastic interior finish and appearance even if you do not take your truck into the dirt. Available for Automatic Transmission Raptors. These pedal covers are also available with the Deluxe option that includes a matching dead pedal/footrest made of billet aluminum. These pedals are available in several finishesShiny Smooth Frosted Smooth  Shiny Anti-Slip Frosted Anti-SlipThe frosted pedals have a fine sandpaper-like finish to them to keep your shoes from slipping. The anti-Slip pedals have a grid or waffle finish machined into them for the ultimate in grip. We do not recommend the shinny pedals due to them becoming very slippery when wet which could cause your shoes to slip off the pedals. Install Information: When installing these pedals you do have to drill holes into your factory pedals. Once installed, these pedals are a part of your car with no chance of coming off. All hardware is stainless steel and provided. The instructions below are applicable to most cars. However, some cars will have a slightly different installation procedure. These differences should be noted on the pedal page for the vehicle. The typical installation time is 30 minutes to 1 hour. Your results may vary. If you ever decide to remove your SRP pedals, the factory rubber covers can be put back on the brake and clutch to cover the holes. The holes you drill into the gas pedal and footrest are really small enough to not be noticed unless looked at closely. Tools required:Drill - 3/16" drill bitPhillips head screwdriver - 1/16" drill bit9mm wrench - Center punchWarning: Make sure you wear safety glasses during this installation. 1. Remove any factory rubber or factory metal/plastic sport covers or any other aftermarket pedal covers from the brake, clutch and/or gas pedal when and if applicable. Most factory rubber covers will pull right off. Some factory metal/plastic sport pedal covers have rivets which must be drilled out (do not drill thru pedal yet) with a 1/8” drill bit to remove the cover. 2. Put masking tape on the brake and clutch and mark the mounting holes using the aluminum pedals as a template. Make note of where the rod is welded to the backside of the pedal pad in relationship to the holes in the billet cover. Align the billet covers in such a way that after you drill through the pedals there will be room to install and hold the nuts on the backside of the pedals. 3. Use your center punch and hammer and punch your mounting holes marked on the brake and clutch. Use the 1/16” drill bit to drill pilot holes, followed by the 3/16” bit. Mount the brake and clutch using machine screws and locknuts. 4. Put masking tape and the gas pedal and footrest. Using the aluminum cover, mark your mounting holes. Remove the aluminum cover. Drill pilot holes with 1/16” drill bit. Tap the holes with the pointy self-tapping screws. Remove screws, put pedal into position, and attach using self-tapping screws. ·Check that all pedals are securely attached using all mounting locations.·Make sure all pedals have adequate clearance between adjacent pedals and floor covering. ·After driving, recheck all pedals to make sure they are secure. Because of the custom nature of these pedals, production time can sometimes run 3-4 weeks and up. Please allow this lead time for shipping Application: 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 Ford Raptor
  • 2010-14 Ford Raptor Door Panel Inserts - Brushed

    2010-14 Ford Raptor Door Panel Inserts - Brushed

    $206.96
    Free Shipping
    Make a statement with these stainless steel door panel inserts. These door panel inserts are made of brushed stainless steel and feature the RAPTOR lettering/logo etched into them. These Raptor door panel inserts are sold as a 6 piece pacakge and simply install with attached 3M tape build into the back of each piece. These RAPTOR door panel inserts are quality pieces and licensed by Ford. Please keep in mind that these door panel inserts are custom made to order and take additional time to ship.FREE SHIPPING ON THESE RAPTOR DOOR PANEL INSERTS!   Application: 2010, 2011, 2012, 2013, 2014 Ford Raptor
  • 2010-2014 Ford Raptor Auxiliary Trim Ring Brushed

    2010-2014 Ford Raptor Auxiliary Trim Ring Brushed

    $26.95
    Dress up your Raptor with our Brushed - Stainless Steel, Auxiliary Trim Ring. These trim pieces are designed to fit around the Auxiliary center console controls and add a clean stylish look to your Raptor's interior.(Polished shown)  Fits all 2010-2014 Ford Raptor trucks. Description 100% Stainless Steel. Brushed finish.(Polished shown) Will not tarnish, fade or rust. Adds a unique look and style to your car. Easy "peel and stick" installation takes just minutes. Fits all 2010-2014 Ford Raptor trucks. Made in USA! American Car Craft is a design company dedicated to developing unique high quality products. With more than thirty years of experience customizing classics, hot rods and exotic cars American Car Craft has developed a truly unique approach to the ever growing auto accessory industry. Our product line specialty is in the engine bay and emanates throughout the vehicle to include custom grilles, stainless interior and exterior trim, to state of the art digital graphics. All American Car Craft products are made from the highest grade 100% - 304 stainless steel and are backed by our customer satisfaction guarantee. Here at ACC we understand that word of mouth is the best advertising you can get, so our goal is to make sure our customers are happy. If you’re not happy, were not happy and we are committed to doing whatever it takes to make it right! So you can buy with confidence in our 100% money back guarantee.   Application: 2010, 2011, 2012, 2013, 2014 Ford Raptor
  • 2010-2014 Raptor Interior Dim Switch Trim Plate Brushed Finish

    2010-2014 Raptor Interior Dim Switch Trim Plate Brushed Finish

    $28.76
    An accent piece for your Ford Raptor's Dim switch. This Dim Switch Trim Plate will fit all Raptors from the 2010 to the 2014 model years.   Fits 2010-2014 Ford Raptor trucks.  Description  This is a Ford Licensed product. 100% Stainless Steel. Brushed finish. Will not tarnish, fade or rust. Easy "peel and stick" installation takes just minutes. Made in USA!All American Car Craft products are made from the highest grade 100% - 304 stainless steel and are backed by our customer satisfaction guarantee. Here at ACC we understand that word of mouth is the best advertising you can get, so our goal is to make sure our customers are happy. If you’re not happy, were not happy and we are committed to doing whatever it takes to make it right! So you can buy with confidence in our 100% money back guarantee.   Application: 2010, 2011, 2012, 2013, 2014 Ford Raptor
  • 2010 - 2014 Ford Raptor F-150 Carbon Fiber Front Door Panel Inserts with Polished Trim 2pc

    2010 - 2014 Ford Raptor F-150 Carbon Fiber Front Door Panel Inserts with Polished Trim 2pc

    $319.95
    Free Shipping
    Redesign your Ford Raptor's interior with these high quality custom carbon fiber door panel inserts. Each of these panels is made from 100% carbon fiber/fiberglass and is designed and manufactured entirely in the USA. Description100% Carbon Fiber/Fiberglass High Polished, mirror finish Will not tarnish, fade or rust Fits all 2010 - 2014 Ford Raptors and F-150's Made in USA!All American Car Craft products are made from the highest grade materials and are backed by our customer satisfaction guarantee. We understand that word of mouth is the best advertising you can get, so our goal is to make sure our customers are happy. If you’re not happy, were not happy and we are committed to doing whatever it takes to make it right! So you can buy with confidence in our 100% money back guarantee.  Application: 2010, 2011, 2012, 2013, 2014 F150, Ford Raptor
  • 2010-2014 Ford Raptor Shifter Plate Brushed Stainless Steel

    2010-2014 Ford Raptor Shifter Plate Brushed Stainless Steel

    $55.76
    Shift into high class with a Brushed Stainless Steel Shifter Plate for your Raptor from Southern Car Parts. These trim pieces are designed to fit over the stock shifter plate and add a clean stylish look to your F150's or Raptor's interior. This shifter plate is a great upgrade to any Ford Raptor. Installs in seconds and will last just as long as your truck. Be sure to check out our other stainless steel upgrades for your Raptor's interior.Application: 2010, 2011, 2012, 2013, 2014 Ford Raptor

12 Item(s)

Grid List

Set Descending Direction
Our interior parts like power window ribbon or vent grilles are both excellent ways to help maintain comfort and beauty. All these products give your Raptor an outstanding appearance. At Southern Car Parts, we offer fiberglass door panel inserts; trim ring, center dash trim and so much more, that you’ll never have enough of browsing through our different categories. We carry world-class products like tweeter rings, cubbyhole squares, vent trim covers and much more.


We offer free shipping on most of our products that are affordably priced to suit all budget requirements. We ensure that our products are only manufactured by trusted brands to maintain the standards of quality. Our collection of Ford Raptor aftermarket products is so huge that if we do not have something in our collection then it is probably not available in the entire market. So end your search here and shop from SCP with confidence. Also, our expert and friendly team is always here to assist you, so feel free to contact us in case of query. You can browse through the category of interior parts below

Ford Raptor Interior Parts and Accessories

Minimal Price: $ 24.26 24.26

X