Kooks Corvette C6 /Z06 Headers


Kooks Corvette C6 /Z06 Headers

Kooks Corvette C6 /Z06 Headers

4 Item(s)

Grid List

Set Descending Direction
  • C6 Corvette Kooks Long Tube Headers

    C6 Corvette Kooks Long Tube Headers

    $1,878.88
    Free Shipping
    3" Collector, choice of 1 3/4" and 1 7/8" Primaries Kooks headers and X pipe are designed to be combined with or without the factory exhaust. You can add Headers and the Kooks X pipe and retain the rest of your OEM exhaust system or you can mix and match with other exhaust systems as long as they are compatible with the OEM system. For instance, you can use Kooks Headers and X Pipe on your C6 LS2 Engine, and have a Borla Axleback exhaust. All Kooks products are designed to be compatible with the OEM system. You must always use the Kooks X pipe and Kooks headers to keep everything aligned back to the catback system or OEM system. As long as you use Kooks Headers and the X pipe, everything will bolt right up just as it would with the OEM system. The 1 3/4" primaries are the standard header application for the C6 Corvette. Highly modified Corvettes only should use the 1 7/8" headers. The 1 7/8" headers will not function properly with stock or close to stock Corvettes. For extremely modified, high-boost, forced induction Corvettes, the 2" primaries can be used. Note, however, the 2" headers are not recommended for Corvettes below the most intense, track-only applications. 2" header primaries will cause issues with blowback and throwing of codes on lesser modified Corvettes. Please understand that you need the Kooks X Pipe if you are going to put headers on your car. The Kooks X pipe accommodates for the change in downpipe length so that once you get to the end of the Kooks X pipe you can connect any aftermarket or OEM system to the Kooks X-pipe and it will align exactly where the factory H pipe would be. Unless you are using a special application, you will need the X pipe.  Why buy Kooks?- Kooks puts in over 45+ years of race winning experience into each header system they produce.- All Kooks Stainless Steel Systems come with a Lifetime Warrantee.- Kook Headers yield the largest gain in horsepower out of any other header company. - Flanges are 3/8" thick and are made from 304 grade Stainless Steel.- Ball and Socket construction leaves a leak free seal between headers and x-pipes.- Kooks offer large diameter headers for high horsepower applications.- Kooks utilizes a scavenger spike (patent pending) in each of their collectors. These spikes increase the velocity of the exhaust and causes a vacuum effect for the exhaust gases to exit the cylinder heads, thus creating a large increase in power. The Kooks Header system comes with everything you need to complete the installation, all gaskets, bolts, and O2 Sensors extenders (if needed) are included. When it comes to headers and exhaust systems, Kooks is an industry standard. Kooks Custom Headers has been building headers since 1962 when George Kook Sr. used his gas torch to build his first set of headers for the family race car. Being heavily involved in racing, his talents did not go unnoticed by all the local competition he would beat on the strip. With the help of George Kook Jr. President of Kooks Custom headers, Kooks has grown to a full fledge manufacturing facility in which hundreds of thousands of headers and exhaust systems are sold each year. Kooks Products. You also have choice of catted or non-catted x-pipe. The catted x-pipe comes with Kooks' housemade, high performance, high-flow cats installed. These cats will provide peak performance with 50 state legal application. Non-catted x-pipes are not legal in many states and are designed for off-road use only as result of this. For track specific applications, the non-catted x-pipe is ideal. Please be sure to select your desired Kooks system from the drop-down menus above so that we can assure to get you the header system you need. Application: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette
  • C6 CORVETTE Z06 AND ZR1 KOOKS LONG TUBE HEADERS

    C6 Corvette Z06 and ZR1 Kooks Long Tube Headers

    $1,920.84
    Free Shipping
    3" Collector, choice of 1 7/8" or 2" Primaries Kooks Corvette Z06 and ZR1 includes O2 Sensor Extensions and all necessary hardware for installation. Kooks Corvette Z06 and ZR1 Headers are 304 stainless steel long tube headers that come with a lifetime warranty. Kooks builds all of their products to the highest standards, and these are possibly the absolute best headers you can buy for your Corvette Z06. They feature 1 7/8" primaries, and 3" collectors with O2 Sensor ports welded in to the pipes. With a proper tune, these headers are good for 20-35HP additional on your Z06. The 1 7/8" are the largest tube design made for the Z06, and will support over 750HP! The 2" Headers are only recommended for installation with the highest modified Corvettes. For applications closer to stock, the 2" Primaries will cause problems, and for this reason the 2" system is only recommended for high-performance track-focused Corvette applications, and extremely high-boost vehicles. Also, because of the degree of boost required to properly run a 2" system we will only sell those with non-catted X-Pipes. The pressure and boost that a Corvette that requires 2" piping will exert will greatly decrease the life and functionality of high flow cats. Kooks headers and X pipe are designed to be combined with or without the factory exhaust. You can add Headers and the Kooks X pipe and retain the rest of your OEM exhaust system or you can mix and match with other exhaust systems as long as they are compatible with the OEM system. For instance, you can use Kooks Headers and X Pipe on your C6, and have a Borla Axleback exhaust. All Kooks products are designed to be compatible with the OEM system. You must always use the Kooks X pipe and Kooks headers to keep everything aligned back to the catback system or OEM system. As long as you use Kooks Headers and the X pipe, everything will bolt right up just as it would with the OEM system. Please understand that you need the Kooks X Pipe if you are going to put headers on your car. The Kooks X pipe accommodates for the change in downpipe length so that once you get to the end of the Kooks X pipe you can connect any aftermarket or OEM system to the Kooks X-pipe and it will align exactly where the factory H pipe would be. Unless you are using a special application, you will need the X pipe. Why buy Kooks?- Kooks puts in over 45+ years of race winning experience into each header system they produce.- All Kooks Stainless Steel Systems come with a Lifetime Warrantee.- Kook Headers yield the largest gain in horsepower out of any other header company. - Flanges are 3/8" thick and are made from 304 grade Stainless Steel.- Ball and Socket construction leaves a leak free seal between headers and x-pipes.- Kooks offer large diameter headers for high horsepower applications.- Kooks utilizes a scavenger spike (patent pending) in each of their collectors. These spikes increase the velocity of the exhaust and causes a vacuum effect for the exhaust gases to exit the cylinder heads, thus creating a large increase in power. When it comes to headers and exhaust systems, Kooks is an industry standard. Kooks Custom Headers has been building headers since 1962, when George Kook Sr. used his gas torch to build his first set of headers for the family race car. Being heavily involved in racing, his talents did not go unnoticed by all the local competition he would beat on the strip. With the help of George Kook Jr. President of Kooks Custom headers, Kooks has grown to a full fledge manufacturing facility in which hundreds of thousands of headers and exhaust systems are sold each year.  Application: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette  
  • Corvette C6 Kooks X-Pipe

    Corvette C6 Kooks X-Pipe

    $520.81
    3" x 3" x 2 1/2" Outlet Kooks Performance X-Pipe for the C6 Corvette (LS2 and LS3) When it comes to headers and exhaust systems, Kooks is an industry standard. Kooks Custom Headers has been building headers since 1962 when George Kook Sr. used his gas torch to build his first set of headers for the family race car. Being heavily involved in racing, his talents did not go unnoticed by all the local competition he would beat on the strip. With the help of George Kook Jr. President of Kooks Custom headers, Kooks has grown to a full-fledged manufacturing facility in which hundreds of thousands of headers and exhaust systems are sold each year. Kooks Products. Replace your restrictive stock H-Pipe with a high-performance Kooks X-Pipe! Comes with X-Pipe and Mid Pipe. Using this X Pipe without cats will not comply with local emissions laws and is for offroad use only!  Inlet 3" x 3" tapered to 2 1/2" outlet for fitment to OEM exhaust Application: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette
  • C6 Corvette Z06 and ZR1 Kooks X-Pipe

    C6 Corvette Z06 and ZR1 Kooks X-Pipe

    $520.80
    When it comes to headers and exhaust systems, Kooks is an industry standard. Kooks Custom Headers has been building headers since 1962 when George Kook Sr. used his gas torch to build his first set of headers for the family race car. Being heavily involved in racing, his talents did not go unnoticed by all the local competition he would beat on the strip. With the help of George Kook Jr. President of Kooks Custom headers, Kooks has grown into a full-fledged manufacturing facility in which hundreds of thousands of headers and exhaust systems are sold each year. Kooks Products. Comes with X-Pipe and Mid Pipe. Using this X Pipe without Kooks' high flow cats will not comply with local emissions laws and is for offroad use only!  Inlet 3" Outlet 3" Application: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette

4 Item(s)

Grid List

Set Descending Direction
Kooks Corvette C6 /Z06 Headers

Minimal Price: $ 506.75 506.75