Nissan GTR Exterior Parts


Nissan GTR Exterior Parts

Nissan GTR Exterior Parts

Looking for some ways to improve the aerodynamics of your Nissan GTR? We carry most everything available for the exterior of your Nissan GTR. Carbon Fiber body panels, rear diffusers, spoilers, and intake snorkels, all available for your GTR from Southern Car Parts.

Check back often as we are adding additional products daily.

1-48 of 55

Page:
  1. 1
  2. 2

Grid List

Set Descending Direction
  • Nissan GT-R R35 Mine's Dry Carbon Rear Wing Spoiler

    Nissan GT-R R35 Mine's Dry Carbon Rear Wing Spoiler

    $4,870.00
    Twilled Dry Carbon Rear Spoiler made for the Nissan GT-R R35 by Mine's Made of twilled dry carbon, the Mines Carbon Rear Wing enhances the high quality look of your GT-R. The height is raised by 30mm from the stock wing which generates an improved airflow for better down-force and drag.   Some people have had questions as to the difference between standard Carbon Fiber (which is technically Wet Carbon) and these Dry Carbon parts. There is a very large difference between the two, and it comes as a result of the way in which they're constructed to offer differences in final integrity and weight. Standard Carbon Fiber is constructed by using a wet lay-up structure, which is very similar to the way in which fiberglass is laid. In this process the resins, which structurally bond the carbon fibers, are laid in seperately from the carbon fibers so that they are not distributed completely evenly throughout the carbon fiber product . With Dry Carbon, the resins are pre-impregnated so that fewer are used but they are distributed more evenly throughout the product. Because of this a much higher heat and a vacuum are necessary for proper curing, but once cured this Dry Carbon has a natural outer coating, another way in which it saves weight over its Wet Carbon bretheren. In all, the Dry Carbon weighs around 75% less as well as much greater structural strength and integrity, making it a vastly superior product on an already great vehicle upgrade.  
  • Nissan GT-R Seibon Dry Carbon Fiber Fenders

    Nissan GT-R Seibon Dry Carbon Fiber Fenders

    $4,800.00
    These premium Seibon Dry Carbon Fiber Fenders give you the ultimate in strength and weight reduction. They also greatly improve the look of your Nissan GT-R. Seibon has produced another high quality, high value carbon fiber product for your Nissan GT-R! Seibon is recognized in the industry leader in aftermarket carbon fiber components, including hoods, scoops, lips, trunks, side skirts, and spoilers. Seibon Carbon Fiber products are manufactured with a single carbon fiber sheet, ensuring no breaks in the lines, and feature a rolled edge for premium look and fitment. Seibon products also feature weight reducing high-quality grade AA carbon fiber, with a clear coat and UV coating to prevent fading and discoloration.   Some people have had questions as to the difference between standard Carbon Fiber (which is technically Wet Carbon) and these Dry Carbon parts. There is a very large difference between the two, and it comes as a result of the way in which they're constructed to offer differences in final integrity and weight. Standard Carbon Fiber is constructed by using a wet lay-up structure, which is very similar to the way in which fiberglass is laid. In this process the resins, which structurally bond the carbon fibers, are laid in seperately from the carbon fibers so that they are not distributed completely evenly throughout the carbon fiber product . With Dry Carbon, the resins are pre-impregnated so that fewer are used but they are distributed more evenly throughout the product. Because of this a much higher heat and a vacuum are necessary for proper curing, but once cured this Dry Carbon has a natural outer coating, another way in which it saves weight over its Wet Carbon bretheren. In all, the Dry Carbon weighs around 75% less as well as much greater structural strength and integrity, making it a vastly superior product on an already great vehicle upgrade.
  • Nissan GT-R R35 Mine's Dry Carbon Doors

    Nissan GT-R R35 Mine's Dry Carbon Doors

    $13,499.00
    Free Shipping
    Nissan GT-R R35 Mine's Dry Carbon Doors The Dry Carbon Fiber Door is designed with the weight reduction as the main objective. However, every effort has been made to make the texture and function as close as the stock door. With Mines legendary quality, all the stock parts fit perfectly and you can feel the superb construction whenever you open/close the door. The weight of each door is 3.2 kg which is about 1/3 of the stock door. Material - twilled dry carbon External coating – none. Either painting or coating is required. Includes both Left and Right doors. Free Shipping to the Continental 48 States!
  • Nissan GT-R R35 Mine's Dry Carbon Racing Canards

    Nissan GT-R R35 Mine's Dry Carbon Racing Canards

    $2,425.00
    Dry Carbon Fiber Racing Canards for the Nissan GT-R by Mine's Made of twilled dry carbon, it significantly increases the front down force and enhance the cornering speed. Fantastically built and designed for easy installation on to the Nissan GT-R, this piece is both incredibly stylish and functional. Some people have had questions as to the difference between standard Carbon Fiber (which is technically Wet Carbon) and these Dry Carbon parts. There is a very large difference between the two, and it comes as a result of the way in which they're constructed to offer differences in final integrity and weight. Standard Carbon Fiber is constructed by using a wet lay-up structure, which is very similar to the way in which fiberglass is laid. In this process the resins, which structurally bond the carbon fibers, are laid in seperately from the carbon fibers so that they are not distributed completely evenly throughout the carbon fiber product . With Dry Carbon, the resins are pre-impregnated so that fewer are used but they are distributed more evenly throughout the product. Because of this a much higher heat and a vacuum are necessary for proper curing, but once cured this Dry Carbon has a natural outer coating, another way in which it saves weight over its Wet Carbon bretheren. In all, the Dry Carbon weighs around 75% less as well as much greater structural strength and integrity, making it a vastly superior product on an already great vehicle upgrade.  
  • Nissan GT-R R35 Carbon Fiber Exhaust Shroud

    Nissan GT-R R35 Carbon Fiber Exhaust Shroud

    $594.15
    Carbon Fiber Exhaust Shroud Trim for the Nissan GT-R R35 These carbon fiber trim pieces for the Nissan GT-R are manufactured from high quality carbon fiber, clear coated for a gorgeous finish, and are gorgeous exterior modification pieces for any R35 out there. These Exhaust Shrouds install easily and fit well, making for a fantastic exterior visual modification piece for the Nissan GT-R.
  • Nissan GT-R R35 Carbon Fiber Rear Spoiler

    Nissan GT-R R35 Carbon Fiber Rear Spoiler

    $1,699.15
    Carbon Fiber Rear Spoiler for the Nissan GT-R R35 Fitment, aesthetics, and functionality is what we aim for at Titek. Thus, the reason we designed our own R35 GT-R carbon fiber rear spoiler. Our rear spoiler gives the GT-R a more aggressive appearance, increases stability and down force during high speeds, and fits just like an OEM product. Mission complete. Spoiler is available in a Gloss clear coat finish to ensure further durability and longevity on this fantastic product. Excellent design and fantastic carbon fiber materials make for an unparalelled product. Flat rate shipping charge of $55 to the Continental 48 States.
  • Nissan GT-R35 APR Front Bumper Canards Carbon Fiber 2012 2013 20

    Nissan GT-R35 APR Front Bumper Canards Carbon Fiber 2012 2013 20

    $584.80
    Free Shipping
    2012 2013 2014 Nissan GT-R35 APR Carbon Fiber Front Bumper Canards Canard Bumper Flaps are constructed of carbon graphite deposit with aluminum leading edge. Canards increase front downforce at high speeds stabilizing the chassis during hard cornering. Found on many GT race cars, they allow you to customize your car front end downforce by either installing two flaps or creating maximum downforce with a full set of four canards. Please note these are made to order, so please allow additional time from order date to ship date. APR Performance has been making top end Carbon Fiber body pieces for the world's most exciting cars for years now, and they've built an incredible reputation on their world class standards in production methods, materials, and workmanship. The end result is that their Carbon Fiber parts are lightweight and durable, and offer fit and finish that's second to none!  
  • Nissan GT-R R35 Dry Carbon Fiber Ducts

    Nissan GT-R R35 Dry Carbon Fiber Ducts

    $637.49
    These lightweight Dry Carbon Fiber NACA ducts feature larger air inlet openings to direct a larger volume of air under the hood for your Nissan GT-R R35. They will in turn provide better cooling efficiency for the turbos and engine underneath the hood. These top quality NACA ducts, like all of our dry carbon fiber products for the Nissan GT-R, are 100% hand-made with our high quality dry carbon fiber and special UV resistant epoxy resin. It’s polished to a wonderful shine but has no clearcoat for maximum weight savings. You can’t get any lighter than dry carbon, and you can't get any better for your Nissan GT-R R35 than this!
  • Nissan GT-R R35 Carbon Fiber Hood Ducts

    Nissan GT-R R35 Carbon Fiber Hood Ducts

    $594.15
    Carbon Fiber Hood Intake Ducts for the Nissan GT-R R35 Manufactured and designed by TiTek from the highest quality carbon fiber materials, these hood ducts for the Nissan GTR are a fantastic light-weight exterior styling and modification piece. One of the most noticable exterior styling cues of the Nissan GT-R is its hood ducts, and these ducts are a lightweight and eye-catching exterior modification piece you can use to liven up the already incredible exterior vehicle styling. Available in Gloss clear coated finish for longevity and durability.
  • Nissan GT-R R35 Dry Carbon Fiber Induction Snorkel

    Nissan GT-R R35 Dry Carbon Fiber Induction Snorkel

    $509.99
    It’s a known fact, that engines will make more power if you can somehow draw in colder outside air. This is exactly what the PWJDM Ram Air Induction Snorkel was designed to do. Ram Air induction Snorkels are nothing new… they have been utilized in professional racing for the last 30 or so years in almost every series from LM to F1. Looking to professional racing for inspiration, PWJDM even recruited a few master fabricators from professional racing… their main purpose was to design and produce Ram Air Induction Snorkels for a few of the most successful racing teams here on the west coast… now, they are an integral part of the R&D and production team here at PWJDM. By directly feeding colder outside air into your stock airbox, the PWJDM Ram Air Induction Snorkel will do wonders for your GT-R. At increased speeds, it maintains positive pressure in front of the filter… ramming as much colder air into your intake. This principle alone is what this Ram Air Induction Snorkels are all about. It isn't exactly rocket science... more colder air in, more HP period. By working within the confinements of the stock air box and keeping within CARB compliance, we were able to utilize our expertise and develop a Ram Air Induction Snorkel that perfectly compliments a stock air box and dramatically increases horsepower at increased speeds. It isn't exactly rocket science, but it isn't all that difficult to comprehend either. Getting colder, denser air into your engine makes more horsepower. • Race proven Ram Air Induction methodology utilized in design • Directly forces colder air into your stock intake • Increases Horsepower • Weighs under 4oz/side • CARB compliant
  • Nissan GT-R R35 Mine's Dry Carbon Underspoiler

    Nissan GT-R R35 Mine's Dry Carbon Underspoiler

    $4,360.50
    Mine's Dry Carbon Underspoiler for the Nissan GT-R R35   In addition to the beautiful race-car-like rear view, the underspoiler provides an excellent weight reduction as well as improved aerodynamics and reduced drag, making this both an absolutely stunning visual modification as well as a powerfully functional piece! Manufactured and designed by Mine's for the Nissan GT-R R35, this piece is a definite must-have for any GTR looking to improve performance and visual styling. Also available to go with it are Dry Carbon Vertical Fins, which will even further improve the handling and performance benefits of the Mine's underspoiler.
  • Nissan GT-R R35 Mine's Dry Carbon Hood

    Nissan GT-R R35 Mine's Dry Carbon Hood

    $7,055.00
    Dry Carbon Fiber Hood for the Nissan GT-R R35 manufactured and designed by Mine's This beatiful hood is made of twilled dry carbon and it weighs only 5.2 kg which is 57 % lighter than the stock (the weight of the stock hood is 12.1 kg). The shape is very similar to the stock GTR Hood, with the air intake ducts integrated into the hood. It is designed to work with the stock latch and the installation is very easy. The hood is available with or without Mines super clear coating.   Some people have had questions as to the difference between standard Carbon Fiber (which is technically Wet Carbon) and these Dry Carbon parts. There is a very large difference between the two, and it comes as a result of the way in which they're constructed to offer differences in final integrity and weight. Standard Carbon Fiber is constructed by using a wet lay-up structure, which is very similar to the way in which fiberglass is laid. In this process the resins, which structurally bond the carbon fibers, are laid in seperately from the carbon fibers so that they are not distributed completely evenly throughout the carbon fiber product . With Dry Carbon, the resins are pre-impregnated so that fewer are used but they are distributed more evenly throughout the product. Because of this a much higher heat and a vacuum are necessary for proper curing, but once cured this Dry Carbon has a natural outer coating, another way in which it saves weight over its Wet Carbon bretheren. In all, the Dry Carbon weighs around 75% less as well as much greater structural strength and integrity, making it a vastly superior product on an already great vehicle upgrade.         $100 Flat Rate shipping on all hoods to the Lower 48 States!
  • Nissan GT-R R35 Carbon Fiber Front Grille

    Nissan GT-R R35 Carbon Fiber Front Grille

    $496.00
    This front grille piece for the Nissan GT-R is manufactured by industry leader Seibon Carbon out of the highest quality carbon fiber. Designed to easily install and replace the OEM front grille, the high quality of these products guarantees their look and strength will be retained for a long time to come. Like all carbon fiber pieces, these are a great weight reducing piece with improved structural strength over standard fiberglass. A great looking, great upgrade for any Nissan GT-R.
  • Nissan GT-R R35 Mine's Dry Carbon Rear Wing Cover

    Nissan GT-R R35 Mine's Dry Carbon Rear Wing Cover

    $3,591.00
    Dry Carbon Fiber Rear Wing Cover for the Nissan GT-R R35 manufactured and designed by Mine's The Mines dry carbon Rear Wing Cover is a joint achievement with the legendary high technology in race car design of Mooncraft and the accumulated race track & street expertise of Mines. There were three key factors that were well thought out during the designing stage. First is the aero-dynamic effectiveness of the wing, and second is the ease of installation and lastly the enhanced appearance of your GTR. The unique “Gurney shape” produces an ideal down force as this product is installed by sandwiching the stock wing with the Mines Carbon Rear Wing Cover. The Mines Carbon Rear Wing Cover is then secured by special bolts and double-sided tape on your stock wing. The beautiful twilled carbon is clear coated for UV-blocking which keeps the excellent appearance over time.
  • Nissan GT-R R35 VSII Dry Carbon Hood

    Nissan GT-R R35 VSII Dry Carbon Hood

    $4,160.00
    This is it: the top of the line in Nissan GT-R Hoods. Crafted Seibon Carbon, an industry leader in carbon fiber car parts, this hood has multiple vents to allow for the monster engine inside of Godzilla to really breathe. Coupled with the extreme weight reduction benefits that dry carbon provides (this hood weighs right around 12 pounds), this is a fantastic performance and style upgrade for any Nissan GT-R R35 out there. Want to make an already mean car look and feel even meaner? This is a great way to do just that! Nissan GT-R owners looking to put on an excellent and undeniably awesome exterior modification to their vehicle, look no further, because Seibon Carbon has delivered right here!       Some people have had questions as to the difference between standard Carbon Fiber (which is technically Wet Carbon) and these Dry Carbon parts. There is a very large difference between the two, and it comes as a result of the way in which they're constructed to offer differences in final integrity and weight. Standard Carbon Fiber is constructed by using a wet lay-up structure, which is very similar to the way in which fiberglass is laid. In this process the resins, which structurally bond the carbon fibers, are laid in seperately from the carbon fibers so that they are not distributed completely evenly throughout the carbon fiber product . With Dry Carbon, the resins are pre-impregnated so that fewer are used but they are distributed more evenly throughout the product. Because of this a much higher heat and a vacuum are necessary for proper curing, but once cured this Dry Carbon has a natural outer coating, another way in which it saves weight over its Wet Carbon bretheren. In all, the Dry Carbon weighs around 75% less as well as much greater structural strength and integrity, making it a vastly superior product on an already great vehicle upgrade.         $150 Flat Rate shipping on all hoods to the Lower 48 States!
  • Nissan GT-R R35 Dry Carbon Fiber Wide Front Fenders

    Nissan GT-R R35 Dry Carbon Fiber Wide Front Fenders

    $3,314.99
    Wide Body Dry Carbon Fiber Front Fenders for the Nissan GT-R R35 by Password:JDM It’s a known fact that the GTR suffers from “understeer” which will be amplified once you add more power to the machine. Let’s face it, the car's incredible, but how can we ever leave “well enough” alone? There is nothing wrong with leaving a perfectly great machine like the GT-R in bone stock form. Hell, in stock trim, it kicks the living daylights out of cars 3 times it MSRP, but for real carnuts like us, leaving well enough alone can be left to the competition. Extended a full 38mm, and much lighter than stock, the PWJDM Wide Front Fenders were designed to accommodate a 20x11 wheel wrapped in 315/30/20 Toyo R888. These are the widest tires available for the rear of a stock GTR, and being an AWD car, it’s only fitting that the same tires are on all four corners. With these PWJDM GT-R Wide Front Fenders, one can certainly claim that that goal has been achieved. You can easily push that corner that much faster when you know your car will be able to handle it. Getting wider fenders to accommodate wider tires are a must if you seriously drive your GT-R. Road sailing becomes that much more of a thrill. Made entirely of Dry Carbon and reinforced with Kevlar to safeguard from thrown rocks and such the PWJDM GT-R Wide Front Fenders are the ultimate must have upgrade for any GT-R (whether you have power upgrades or not). You will definitely feel the benefits of having larger rubbers up front instantaneously. There isn’t an option like this being offered by anyone else. These took 200+ days to develop. They have been well thought out. Much consideration was given to aerodynamics, aesthetics, functionality, and having them “ADD” to the overall stunning looks of the factory GT-R. Although aggressive in theory, these Wide Fenders are actually pretty subtle looking. We also deepened the side vents on the fenders to help alleviate the high pressures at increased speeds inside the fender well. The front wheel arches flow perfect with the rear quarters of the car so well that you would think these were designed by factory themselves… to accommodate where the fenders meets the front bumper, we also designed a bumper extension that also deletes the front side markers for a sleek clean look. Since the clear side markers are so hard to get a hold of for a reasonable price, we decided to engineer these fenders to delete them so you won’t have to bother paying a ransom for them. These Wide GT-R Fenders along with the bumper extensions are sold bare dry carbon and are ready for refinishing prep work(painting)**. **Installation is not difficult, but should be left to a professional body shop. Once fitted, the fit and finish is exact. We designed these to hold a very tight tolerance, so we undersized all the holes which can easily be opened up with a drill/rotary for a perfect fit and finish. - Ultra light Dry carbon Construction - Kevlar Reinforced 1 piece single op produced. - 38mm wider and lighter than stock - Accommodates 315/30-20 R888 on 20x11 without the need for spacers - Includes matching bumper extensions - Matches and flows well with the rear quarter panels - Deletes front side markers - Addresses the “understeer” issues with the GT-R - And attracts attention in droves! Some people have had questions as to the difference between standard Carbon Fiber (which is technically Wet Carbon) and these Dry Carbon parts. There is a very large difference between the two, and it comes as a result of the way in which they're constructed to offer differences in final integrity and weight. Standard Carbon Fiber is constructed by using a wet lay-up structure, which is very similar to the way in which fiberglass is laid. In this process the resins, which structurally bond the carbon fibers, are laid in seperately from the carbon fibers so that they are not distributed completely evenly throughout the carbon fiber product . With Dry Carbon, the resins are pre-impregnated so that fewer are used but they are distributed more evenly throughout the product. Because of this a much higher heat and a vacuum are necessary for proper curing, but once cured this Dry Carbon has a natural outer coating, another way in which it saves weight over its Wet Carbon bretheren. In all, the Dry Carbon weighs around 75% less as well as much greater structural strength and integrity, making it a vastly superior product on an already great vehicle upgrade. Flat Rate $150 Shipping to the Continental 48 States.
  • Nissan GT-R Seibon Dry Carbon Fiber Trunk Lids

    Nissan GT-R Seibon Dry Carbon Fiber Trunk Lids

    $2,400.00
    These premium Seibon Dry Carbon Fiber Trunk Lids give you the ultimate in strength and weight reduction. The Seibon Trunk Lid for the Nissan GT-R really looks fantastic on the vehicle, and can add a lot to its already interesting and unique exterior styling! Seibon is recognized in the industry leader in aftermarket carbon fiber components, including hoods, scoops, lips, trunks, side skirts, and spoilers. Seibon Carbon Fiber products are manufactured with a single carbon fiber sheet, ensuring no breaks in the lines, and feature a rolled edge for premium look and fitment. Seibon products also feature weight reducing high-quality grade AA carbon fiber, with a clear coat and UV coating to prevent fading and discoloration.       Some people have had questions as to the difference between standard Carbon Fiber (which is technically Wet Carbon) and these Dry Carbon parts. There is a very large difference between the two, and it comes as a result of the way in which they're constructed to offer differences in final integrity and weight. Standard Carbon Fiber is constructed by using a wet lay-up structure, which is very similar to the way in which fiberglass is laid. In this process the resins, which structurally bond the carbon fibers, are laid in seperately from the carbon fibers so that they are not distributed completely evenly throughout the carbon fiber product . With Dry Carbon, the resins are pre-impregnated so that fewer are used but they are distributed more evenly throughout the product. Because of this a much higher heat and a vacuum are necessary for proper curing, but once cured this Dry Carbon has a natural outer coating, another way in which it saves weight over its Wet Carbon bretheren. In all, the Dry Carbon weighs around 75% less as well as much greater structural strength and integrity, making it a vastly superior product on an already great vehicle upgrade.
  • Nissan GT-R R35 Mine's Dry Carbon Air Ducts

    Nissan GT-R R35 Mine's Dry Carbon Air Ducts

    $845.00
    Carbon Fiber Hood Air Ducts Vents for the Nissan GT-R R35 by Mine's Mine's has manufactured a replacement for the stock in-take duct on the front hood of the GTR. By utilizing a superior carbon material, Mine's new carbon intake duct presents an exceptional race intake appearance especially suited for this flagship GTR. The intake duct is easily bolted on and available in two types; one a standard wet carbon appearance and the second a "twilled" wet carbon look. First Picture - standard wet carbon Second picture - twilled wet carbon    
  • Nissan GT-R Seibon Dry Carbon Doors

    Nissan GT-R Seibon Dry Carbon Doors

    $6,400.00
    These premium Seibon Dry Carbon Fiber Doors give you the ultimate in strength and weight reduction. The look and styling of these doors are top notch too, and will really add to the unique and powerful appearance of your Nissan GT-R! Seibon is recognized in the industry leader in aftermarket carbon fiber components, including hoods, scoops, lips, trunks, side skirts, and spoilers. Seibon Carbon Fiber products are manufactured with a single carbon fiber sheet, ensuring no breaks in the lines, and feature a rolled edge for premium look and fitment. Seibon products also feature weight reducing high-quality grade AA carbon fiber, with a clear coat and UV coating to prevent fading and discoloration. These doors weigh in at just around 8 lbs total!       Some people have had questions as to the difference between standard Carbon Fiber (which is technically Wet Carbon) and these Dry Carbon parts. There is a very large difference between the two, and it comes as a result of the way in which they're constructed to offer differences in final integrity and weight. Standard Carbon Fiber is constructed by using a wet lay-up structure, which is very similar to the way in which fiberglass is laid. In this process the resins, which structurally bond the carbon fibers, are laid in seperately from the carbon fibers so that they are not distributed completely evenly throughout the carbon fiber product . With Dry Carbon, the resins are pre-impregnated so that fewer are used but they are distributed more evenly throughout the product. Because of this a much higher heat and a vacuum are necessary for proper curing, but once cured this Dry Carbon has a natural outer coating, another way in which it saves weight over its Wet Carbon bretheren. In all, the Dry Carbon weighs around 75% less as well as much greater structural strength and integrity, making it a vastly superior product on an already great vehicle upgrade.
  • Nissan GT-R R35 Carbon Fiber Front Grille

    Nissan GT-R R35 Carbon Fiber Front Grille

    $424.15
    Carbon Fiber Front Grille Piece for the Nissan GT-R R35 Titek’s carbon fiber grill is another must have piece from our arsenal of carbon fiber products for the Nissan GT-R. Made with high quality carbon fiber, and clear coated to perfection, this grill is a direct OEM replacement part, and will fit perfectly on your GT-R! A fantastic looking, light-weight, exterior modification piece. $65 Flat Rate Shipping to the Continental 48 States.
  • Nissan GT-R R35 Mine's Dry Carbon Front Spoiler

    Nissan GT-R R35 Mine's Dry Carbon Front Spoiler

    $4,875.00
    Free Shipping
    Dry Carbon Fiber Front Lip Spoiler for the Nissan GT-R Designed by Mine's Type I Dry Carbon GTR Front Spoiler: Without drastically changing the stock look, the Mine's Carbon Front Spoiler provides a simple very sophisticated appearance to your GT-R. A twilled dry carbon produces both a sense of luxury and functionality without adding much weight. The surface is clear coated. You will find an improved down-force at middle to high speed driving. The installment is an easy bolt on configuration. Material - Dry carbon Weight - 2.12 kg Type II Dry Carbon GTR Front Spoiler: This type II spoiler has a more aggresive design than the type I with the right & left edges are extended further to the front by 15mm. The inlets for the brake duct are larger than those of GTR Spec V. The weight is 3.7 kg lighter than the stock. Material   Twilled dry carbon. Super clear coating is applied. Some people have had questions as to the difference between standard Carbon Fiber (which is technically Wet Carbon) and these Dry Carbon parts. There is a very large difference between the two, and it comes as a result of the way in which they're constructed to offer differences in final integrity and weight. Standard Carbon Fiber is constructed by using a wet lay-up structure, which is very similar to the way in which fiberglass is laid. In this process the resins, which structurally bond the carbon fibers, are laid in seperately from the carbon fibers so that they are not distributed completely evenly throughout the carbon fiber product . With Dry Carbon, the resins are pre-impregnated so that fewer are used but they are distributed more evenly throughout the product. Because of this a much higher heat and a vacuum are necessary for proper curing, but once cured this Dry Carbon has a natural outer coating, another way in which it saves weight over its Wet Carbon bretheren. In all, the Dry Carbon weighs around 75% less as well as much greater structural strength and integrity, making it a vastly superior product on an already great vehicle upgrade. Free Shipping to the Continental 48 States!
  • Nissan GT-R R35 Dry Carbon Fiber Trunk Lid

    Nissan GT-R R35 Dry Carbon Fiber Trunk Lid

    $1,954.99
    Introducing the world's first dry carbon fiber Nissan GT-R trunk manufactured by Password:JDM. This trunk is made with high quality dry carbon fiber material. It retains the original shape of the Nissan GT-R trunk so fitment is OEM quality, while also reducing the overall weight of your Nissan GT-R. This Password:JDM exclusive trunk for the Nissan GT-R weighs in at 5lbs. The guys at Password:JDM were able get the weight down by utilizing their nexclusive epoxy resin process to artfully form the dry carbon fiber to the masterpiece you see here. The resin gives off a natural shine without the use or weight of clearcoating. This trunk retains all the original mounting points, drill holes and bracing for attachments of the trunk release, dampers, and the original rear wing. Every Password:JDM R35 GT-R Dry Carbon Fiber Trunk Lid features an edge burn clear coat premium finish. The true to form process of applying multiple layers of UV protected clear coat to retain the factory shine matching the other Nissan GT-R panels will provide a OEM factory look to the lighter dry carbon fiber piece.
  • Nissan GT-R R35 Carbon Fiber Trunk Lid

    Nissan GT-R R35 Carbon Fiber Trunk Lid

    $1,440.00
    This OEM styled carbon fiber trunk lid, manufactured by industry leader Seibon Carbon for the Nissan GT-R, is a fantastic exterior weight-reducing modification crafted from the highest quality carbon fiber. Carbon fiber is so useful as a vehicle exterior modification piece because it has great structural integrity and is extremely light-weight, and considering that the trunk lid is one of the bulkier and heavier body pieces on a vehicle, this is a great functional and stylish piece for any Nissan GT-R. Seibon crafts the highest quality body pieces, and this is certain to retain its beauty and strength for many years to come.
  • Nissan GT-R R35 Dry Carbon Fiber Raised Rear Spoiler

    Nissan GT-R R35 Dry Carbon Fiber Raised Rear Spoiler

    $2,124.99
    The most sought after Nissan GT-R aero modification is now available from Password:JDM! We are proud to introduce our Dry Carbon Elevated Rear Spoiler. Our spoiler features full dry carbon fiber construction, 60mm elevated height, slight offset towards the rear of the car, and integrated third brake light. Includes UV clear coated glossy finish. 100% hand made in the USA! Flat Rate $100 Shipping to the Continental 48 States.
  • Nissan GT-R R35 Carbon Fiber Front Air Dam

    Nissan GT-R R35 Carbon Fiber Front Air Dam

    $1,274.15
    Carbon FIber Front Air Dam Lip Spoiler for the Nissan GT-R R35 TiTek Innovations carbon fiber front air dam for the Nissan GT-R R35 increases stability and downforce during high speeds. Our durable front air dam saves weight and also uses your existing factory mounting location on the Nissan GT-R for easy and intelligent install and fitment. A fantastic product manufactured from the highest quality carbon fiber materials and clear coated for durability, this is a surefire exterior modification piece for any Nissan GT-R that is both stylish and functional. While the product is light-weight, its size and packaging requirements mean that it will be shipped to the Continental 48 States at a $75 Flat Rate Charge.
  • Nissan GT-R R35 Dry Carbon Hood

    Nissan GT-R R35 Dry Carbon Hood

    $2,804.99
    Introducing the world's first true dry carbon fiber Nissan GT-R R35 hood developed by Password:JDM. Its no secret, lighter cars do go faster (stop that much quicker as well), and by reducing the weight up from top it also lowers your car's center of gravity: making it handle that much better! This dry carbon fiber hood retains the original shape but reduces the overall weight by utilizing our state of the art manufacturing process and race quality dry carbon fiber to scale in under 15lbs. Password:JDM is the first to market a weight reduction initiative for the all new Nissan GT-R R35 and this hood is the first item of many product released to achieve that goal. The Password:JDM product line is designed with form and function since it retains the original dimensions set forth by Nissan for the introduction of the GT-R to North America. Every Password:JDM R35 GT-R Dry Carbon Fiber Hood features an edge burn clear coat premium finish. The true to form process of applying multiple layers of UV protected clear coat to retain the factory shine matching the other Nissan GT-R panels will provide a OEM factory look to the lighter dry carbon fiber piece. $125 Flat Rate Shipping to the Continental 48 States
  • Nissan GT-R R35 Mine's Dry Carbon Trunks

    Nissan GT-R R35 Mine's Dry Carbon Trunks

    $5,643.00
    Dry Carbon Trunk Lids for the Nissan GTR R35 by Mine's Mine's has manufactured and developed two fantastic dry carbon fiber trunk lid options for the Nissan GT-R. The first, the Type I is designed for use with the stock rear wing. The Type II trunk lid is manufactured with attachment wings for the Mine's Dry Carbon rear spoiler option. Both trunk lids are drastically lighter than the stock option, (Weighing in at about 1/3 of the stock trunk lid's weight), and are fantastic looking body component pieces. Both trunk lids are available either with or without the Mine's Super Clear Coating. Both trunk lids are designed to easily bolt on with the standard, stock placement. Some people have had questions as to the difference between standard Carbon Fiber (which is technically Wet Carbon) and these Dry Carbon parts. There is a very large difference between the two, and it comes as a result of the way in which they're constructed to offer differences in final integrity and weight. Standard Carbon Fiber is constructed by using a wet lay-up structure, which is very similar to the way in which fiberglass is laid. In this process the resins, which structurally bond the carbon fibers, are laid in seperately from the carbon fibers so that they are not distributed completely evenly throughout the carbon fiber product . With Dry Carbon, the resins are pre-impregnated so that fewer are used but they are distributed more evenly throughout the product. Because of this a much higher heat and a vacuum are necessary for proper curing, but once cured this Dry Carbon has a natural outer coating, another way in which it saves weight over its Wet Carbon bretheren. In all, the Dry Carbon weighs around 75% less as well as much greater structural strength and integrity, making it a vastly superior product on an already great vehicle upgrade.
  • Nissan GT-R R35 Canards

    Nissan GT-R R35 Canards

    $245.57
    Free Shipping
    Utilizing Steve Millen’s expansive racing heritage, STILLEN is proud to release functional high quality urethane Front Canards for the Nissan GT-R. If you want to accentuate the front lip of your Nissan GT-R R35, these high quality Front Canards are an excellent way to do just that. If you also want to enhance the aerodyanimcs and handling of your GT-R these are a great, quick addition to add downforce and air-flow across the body. An easy, fantastic addition that requires no painting and installs in a few short minutes!  
  • Nissan GT-R R35 Mine's Dry Carbon Side Steps

    Nissan GT-R R35 Mine's Dry Carbon Side Steps

    $5,600.00
    Mine's Dry Carbon Fiber Nissan GT-R R35 Side Step Panels The exteded step portion minimizse the airflow into the undercarriage. The well thought-out design maintains the harmony with the Mines front and rear spoiler for the Nissan GT-R. A fantastic exterior dry carbon piece for any GTR! Material   Twilled dry carbon. Super clear coating is applied. Some people have had questions as to the difference between standard Carbon Fiber (which is technically Wet Carbon) and these Dry Carbon parts. There is a very large difference between the two, and it comes as a result of the way in which they're constructed to offer differences in final integrity and weight. Standard Carbon Fiber is constructed by using a wet lay-up structure, which is very similar to the way in which fiberglass is laid. In this process the resins, which structurally bond the carbon fibers, are laid in seperately from the carbon fibers so that they are not distributed completely evenly throughout the carbon fiber product . With Dry Carbon, the resins are pre-impregnated so that fewer are used but they are distributed more evenly throughout the product. Because of this a much higher heat and a vacuum are necessary for proper curing, but once cured this Dry Carbon has a natural outer coating, another way in which it saves weight over its Wet Carbon bretheren. In all, the Dry Carbon weighs around 75% less as well as much greater structural strength and integrity, making it a vastly superior product on an already great vehicle upgrade.
  • Nissan GT-R R35 Dry Carbon Spoilers

    Nissan GT-R R35 Dry Carbon Spoilers

    $1,760.00
    Seibon Carbon is an industry leader in Carbon Fiber car parts, and these Dry Carbon spoilers for the Nissan GT-R R35 are exemplary reasons why. Crafted from the highest quality carbon fibers in a dry lay-up form, these dry carbon spoilers are the apotheosis of everything great about carbon fiber: great structural strength, extreme weight reduction, and great styling. Available in both OEM styling and the Seibon VSII style, either option is a great piece of exterior visual modification that is also functional. OEM: VSII:       Some people have had questions as to the difference between standard Carbon Fiber (which is technically Wet Carbon) and these Dry Carbon parts. There is a very large difference between the two, and it comes as a result of the way in which they're constructed to offer differences in final integrity and weight. Standard Carbon Fiber is constructed by using a wet lay-up structure, which is very similar to the way in which fiberglass is laid. In this process the resins, which structurally bond the carbon fibers, are laid in seperately from the carbon fibers so that they are not distributed completely evenly throughout the carbon fiber product . With Dry Carbon, the resins are pre-impregnated so that fewer are used but they are distributed more evenly throughout the product. Because of this a much higher heat and a vacuum are necessary for proper curing, but once cured this Dry Carbon has a natural outer coating, another way in which it saves weight over its Wet Carbon bretheren. In all, the Dry Carbon weighs around 75% less as well as offering much greater structural strength and integrity, making it a vastly superior product on an already great vehicle upgrade.
  • Nissan GT-R R35 Dry Carbon Fiber Ultimate Front Lip Spoiler

    Nissan GT-R R35 Dry Carbon Fiber Ultimate Front Lip Spoiler

    $2,124.99
    Dry Carbon Fiber Front Lip Spoiler for the Nissan GT-R R35 by Password:JDM If you haven't heard yet, the word on the street is that the Password:JDM Ultimate Front Lip Spiler is the best damn GT-R front lip out there - modular to many other add-ons (including dry carbon brake ducts!), aggressive, and absolutely 100% Dry Carbon MADE IN THE USA. Function meets form in Password:JDM's Ultimate Front Lip Spoiler for the Nissan GT-R (R35), and offers incredible styling and fantastic aerodynamic, downforce, and drag benefits. For all the times you were worried about the roadkill you just ran over, the lip is constructed of honeycomb matrix on its underside, strength tested with baseball bats (no, seriously...), and is ready to survive your mad driving skills on and off the track. Keep the lip in tip-top shape and ask for the Lexan® skid pads and a set of extra washers to change out just in case. And you're a self-proclaimed track star, right? Keep it COOL with the addition of the PWJDM Dry Carbon Brake Duct Mod (optional to the Ultimate Lip). These babies duct all the cool air you're scooping up at high speeds and funnel it directly onto your brake calipers, so why the hell not? Reduce brake fade the right way with these weekend add-ons! Features: - 100% Dry Carbon Construction - MADE IN THE USA - HMR - Honeycomb Matrix Reinforced Construction - Lightweight (8.5lbs bare) and SUPER STRONG...hell, we've taken a baseball bat to it! - Dry Carbon Fin Strakes come STANDARD Modular Additions: - 100% Dry Carbon Reversible Center Extension (2x2 Carbon, Kevlar) - PWJDM 100% Dry Carbon Brake Ducts (come in a pair, shave to fit offsets!) - Lexan® Scrape Shield Skidplates and Extra Washers (for the times you got too damn low) Some people have had questions as to the difference between standard Carbon Fiber (which is technically Wet Carbon) and these Dry Carbon parts. There is a very large difference between the two, and it comes as a result of the way in which they're constructed to offer differences in final integrity and weight. Standard Carbon Fiber is constructed by using a wet lay-up structure, which is very similar to the way in which fiberglass is laid. In this process the resins, which structurally bond the carbon fibers, are laid in seperately from the carbon fibers so that they are not distributed completely evenly throughout the carbon fiber product . With Dry Carbon, the resins are pre-impregnated so that fewer are used but they are distributed more evenly throughout the product. Because of this a much higher heat and a vacuum are necessary for proper curing, but once cured this Dry Carbon has a natural outer coating, another way in which it saves weight over its Wet Carbon bretheren. In all, the Dry Carbon weighs around 75% less as well as much greater structural strength and integrity, making it a vastly superior product on an already great vehicle upgrade. Flat Rate $125 Shipping to the Continental 48 States!
  • Nissan GT-R R35 Mine's Dry Carbon Bumper Protection Inserts

    Nissan GT-R R35 Mine's Dry Carbon Bumper Protection Inserts

    $864.50
    Mine's Dry Carbon Bumper Protector replacement Trim for the Nissan GT-R R35 The MINES Rear Bumper Protector is made of dry carbon and is designed to replace the stock rear bumper protector. With a beautifully designed twilled carbon surrounding the exhaust tips, this product creates a subtle difference which makes your GTR stand out among all other GTR’s. The surface is clear coated for UV protection and it has the same shape as the stock rear bumper protector. Installation is done with several rivets.  
  • Nissan GT-R R35 Dry Carbon OEM Style Hood

    Nissan GT-R R35 Dry Carbon OEM Style Hood

    $3,680.00
    Seibon Carbon, an industry leader in carbon fiber car parts, has developed a fantastic line of products for the powerful and incredible Nissan GT-R. This hood is constructed of the highest quality carbon fiber to ensure it maintains its strength and beauty for a long time come. Modeled after the OEM hood, this is an easy install, and the weight reduction bonuses it provides are almost a given. The hood is one of the heavier and bulkier parts of any vehicle, and by switching to dry carbon you drop the hood's total weight to right around 15 pounds, quiet a huge saving that helps with power and handling for any GT-R. A fantastic upgrade for you Nissan GT-R R35. Some people have had questions as to the difference between standard Carbon Fiber (which is technically Wet Carbon) and these Dry Carbon parts. There is a very large difference between the two, and it comes as a result of the way in which they're constructed to offer differences in final integrity and weight. Standard Carbon Fiber is constructed by using a wet lay-up structure, which is very similar to the way in which fiberglass is laid. In this process the resins, which structurally bond the carbon fibers, are laid in seperately from the carbon fibers so that they are not distributed completely evenly throughout the carbon fiber product . With Dry Carbon, the resins are pre-impregnated so that fewer are used but they are distributed more evenly throughout the product. Because of this a much higher heat and a vacuum are necessary for proper curing, but once cured this Dry Carbon has a natural outer coating, another way in which it saves weight over its Wet Carbon bretheren. In all, the Dry Carbon weighs around 75% less as well as much greater structural strength and integrity, making it a vastly superior product on an already great vehicle upgrade.   $150 Flat Rate shipping on all hoods to the Lower 48 States!
  • Curb Alert All Makes and Models

    Curb Alert All Makes and Models

    $139.95
    Free Shipping
    Introducing the cure for the common curb, the Curb Alert. Front end damage when parking is a very real problem for many cars on the road today, especially for vehicles who have installed ground effects or aerodynamic profile improvements on their vehicles. Curbs are something that are one of those road hazards that do more damage to sports cars than any other hazard on the road. In fact, just a simple trip to the corner store can become a costly errand if you over-estimate your front end clearance when parking: damage repairs could easily run $1000 or more; however, Curb Alert provides you a warning system that gives you three-deep warning tones as you approach too close to a curb. The Curb Alert is very easy to install and does not put a drain on your battery when the car is not on. Using a patented infrared technology, the front mounted sensor is calibrated to a warning distance of anywhere from 8-28" (you decide with whatever you feel comfortable with). The warning alarm is hidden in the car and will give you three gentle tones when you are within a specified distance to the curb. The system gives you a short beep every time you start your car to let you know the system is active. The Curb Alert is one of a kind and is a gadget that will save you money in the long run, preventing front end damage to any car that is low enough to be vulnerable to a Curb. Do not take a chance, get the Curb Alert to prevent curb damage. We are the only company that gives you specific install packages for your vehicle. We do the installations on the vehicles ourself and then personally modify the Curb Alert so that you do not need to do any splicing or crimping. It comes prewired and ready to install, We have specific install packages for the Camaro, C6 Corvette , C5 Corvette , and BMW. Shipping is Free Universal Mount (All Makes and Models) Warns with an audible alarm before striking a curb that could damage your front bumper and/or spoiler. Prevents embarrassing parking lot moments and sounds when your bumper or front spoiler hits a curb. Sensor can mount in a discrete manner in the front end of most any vehicle and does not require any drilling. Advanced infra-red triangulation technology and specialized software embedded for reliable operation. Warning distance is adjustable from 8-28 inches. (Bumper to curb) Removable when necessary with out leaving any holes as evidence. Automatic power-up on vehicle ignition; never a battery drain. Alert sound volume can be set to High, Low, or Mute inside vehicle. Installation kit includes installation procedures, all wiring, wire ties, sensor calibration procedures, and user guide. Some examples below of why you need Curb Alert   This is not one of those gimmicky products, we have installed it on a C6 Corvette Z06, Nissan GTR, BMW 335i, and a Dodge Challenger. In all instances it works exactly as described (we wanted to test it ourselves before we opened the flood gates ;)) It is the real deal and will save you money in the long run. Heck it might it even give you enough confidence to let your significant other take the car for spin (my biggest worry letting someone else drive my car is their lack of familiarity with judging the curb distance when parking). Below are some pictures of installations on various vehicles C7 Corvette Stingray Curb Alert Installation Video Corvette Curb Alert C6 Installation Video  Curb Alert C5 Installation Video 2010+ Camaro Installation Video BMW 3 Series Installation Video Installation Instructions Below Curb Alert Installation Instructions Curb Alert Professional Install Instructions Curb Alert Calibration Instructions Curb Alert Calibration Video Please select your desired installation package from the drop-down menu below:
  • Corvette / Camaro Master Blaster Car Dryer

    Corvette / Camaro Master Blaster Car Dryer

    Regular Price: $349.00

    Special Price $339.00

    Free Shipping
    Drastically cut down on your car washing time and spend those extra hours enjoying your car on the road. The Metro Force Master Blaster Automotive and Motorcycle Dryer is the ultimate utility for washing your vehicle, and will help cut down on drying time and also provide an easier way for drying those hard to reach places on your car or motorcycle, such as: brake and side vents and vent inserts, engine panels and gaps, hood and trunk gaps, and window louvre recesses. Comes with Free Vacuum Wall Mount! Flip the switch on your Air Force Master Blaster Car Dryer, and up to 58,500 ft./min. of rushing air is yours to aim. The twin 4 HP motors power dual-speed fans that dry your bike or auto in record time without a potentially damaging heating element.   Got a detail business? Even better. The Metro Air Force Master Blaster Car Dryer boasts durable all-steel construction that lasts. The 10 ft. commercial-grade hose and 12 ft. cord give you all the range you need. And, it weighs a mere 16 lbs. – powerful and portable. And, whether you use it for home or a business, your Metro Air Force Master Blaster Motorcycle Dryer carries a 1-year warranty. Features: The Metro Air Force Master Blaster Car & Motorcycle Dryer cuts your drying time by up to 75% Durable all-steel construction Dual motors producing 8HP at peak Blasts up to 58,500 ft. of air per minute Two-stage dual fan with two speeds Two temperature settings 10 ft. long x 1 1/2” diameter commercial-grade hose Topped by a heavy-duty neoprene blower nozzle 12 ft. heavy duty cord Weighs just 16 lbs. E/Z change foam filter Your Metro Air Force Master Blaster Motorcycle & Car Dryer carries a 1-year warranty Since 1939, the Metropolitan Vacuum Cleaner Co., Inc. has evolved into a multidivisional corporation. From a small retail store front in the Bronx, NY rebuilding and selling vacuum cleaners, to a diversified multiunit manufacturing facility in 2001, producing amongst other products, Data-Vac Computer Cleaning Systems and Air Force Dog Dryers.   The early years for Metropolitan were solely devoted to vacuum cleaners. Founded by Israel and Pearl Stern, Metro was totally involved in the distribution and retailing of vacuum cleaners. From 1946 through 1949, the main core of Metro's business was the reconditioning and sale of vacuum cleaners to retail specialty stores, 5 & Dime and mail order houses.   In 1951 Jules Stern, son of Israel and Pearl, joined the business on a full-time basis. Between 1957 and 1970 Metro introduced three innovative industry "firsts". In 1957 a popularly priced 110-volt handheld vacuum cleaner. In 1964 the first 12-volt automotive hand held vacuum cleaner that plugged into the cigarette lighter outlet of cars. With the introduction of these two overwhelmingly successful products, demand outstripped production capabilities and a move to a larger facility was necessary. In 1968 Metro moved into its own 32,000 square foot building in Suffern, NY. In 1970 Metro introduced another industry first, the Metro Duo-Volt, the world's first and still only dual voltage (110V-12V) hand held vacuum cleaner, designed to work in the home and in the car.   In 1974 Kenneth Stern, the eldest son of Jules, joined Metro, adding a third generation of Sterns to the family business. Through the seventies and into the eighties Metro introduced many different models of vacuum cleaners from compact powerful canisters to full size vacuum cleaners.   In the eighties, Metro aggressively began to diversify into new and different industries. David Stern, Jules' youngest son, entered the company on a full-time basis in 1984. Since 1984 under the keen eyes of Jules, President, Kenneth, Vice-President of National Sales and David, Vice-President of Marketing, many new and different markets have been opened for Metro products.   Metro is now a major factor in the computer/office product industry with Metro Data-Vac Computer Cleaning Systems. Data-Vac Computer Cleaning Systems are designed to avoid costly downtime. Ever so important, is the cleanup and maintenance of computers, printers, laser printers and copiers.   2001 proved to be extraordinary for Metro for a number of reasons, Continuous growth of the Data Vac division, Metro's Magic Air Division which markets high volume pumps and inflator/deflators to the marine, camping and sporting goods industries and Metro's Air force Pet Grooming Dryers Division which by January of 1989, was catapulted to the top of the pet dryer industry and now has over 80 wholesale distributors in the United States and many foreign countries. Metro is concentrating on expanding all of these diverse product categories with the introduction of new products in each of their divisions.   Metro entered the motorcycle industry in April, 2002, with the Air Force Blaster Motorcycle Dryer. The Metro Air Force Blaster motorcycle dryer was specifically designed for cleaning and drying motorcycles with dry, filtered warm air (about 20-25 degrees above ambient temperature). The Metro Air Force Blaster will cut cleaning time by 80%. Five to seven minutes is all it takes to quickly and effectively dry motorcycles. The Blaster is the hottest new motorcycle care product to come out in decades and is completely safe for all paint and chrome finishes. In our 65 years of business, this has been one for the fastest and most successful product launches ever.   The above information has been provided by the Manufacturer and AutoAnything cannot guarantee the accuracy thereof or endorse the opinions expressed.
  • Nissan GT-R R35 Carbon Fiber License Plate Backing

    Nissan GT-R R35 Carbon Fiber License Plate Backing

    $227.80
    Free Shipping
    Carbon Fiber License Plate Backing Plate for the Nissan GT-R R35 Adding on this Carbon Fiber License Plate backing will spice up the exotic feel of your Nissan GT-R. Made from high-quality, lightweight, and durable carbon fiber weave and CNC-cut to perfection, this backing plate will add a great visual touch to the rear of your GT-R, and allow for a perfect, like OEM fit. Designed to fit perfectly in the recessed space behind the license plate and provide a more exotic, supercar appearance to the already gorgeous R35 GT-R. APR Performance has been making top end Carbon Fiber body pieces for years now, and they've built an incredible reputation on their world class standards in production methods, materials, and workmanship. The fit and finish of their Carbon Fiber is second to none!  
  • Nissan GT-R R35 Front Lip Spoiler

    Nissan GT-R R35 Front Lip Spoiler

    $516.62
    Utilizing Steve Millen's expansive racing heritage, STILLEN is proud to release functional high quality urethane Front Lip Spoiler for the Nissan GT-R R35. Enhancing the aerodynamic performance of such a finely tuned car like the GT-R is no small feat.  When developing the car Nissan did a great job of developing an aero package that works well, but left some room for improvement for the true enthusiast.  One of the most common complaints of GT-R owners is the car has a tendency to "push" when exercised hard on a race course (understeer).  Two ways to fix this condition are through the suspension, or increasing downforce via aerodynamics of the car at higher speeds.  Increasing the aerodynamic downforce keeps the front end of the car planted and therefore improving front grip, reducing the "push" effect.   The STILLEN Urethane Lip Spoiler adds 2" of length to the OEM fascia, and installs directly onto the vehicle over the factory piece. This lip spoiler is designed to hold additional air onto the nose, with flares on the side corners producing a canard effect for extra control.   Another major benefit of the front lip spoiler is the durability.  Constructed out of high-quality polyurethane, this front spoiler is nearly indestructible and carries a limited lifetime warranty. This means it can stand up to the hazards of the race track or the drive around town with 100% driver/owner confidence.
  • Nissan GT-R R35 Carbon Fiber Air Ducts

    Nissan GT-R R35 Carbon Fiber Air Ducts

    $496.00
    These active air ducts for the hood of the Nissan GT-R are constructed from carbon fiber by Seibon Carbon, an industry leader. Seibon uses only the highest quality carbon fiber to ensure the strength and quality of their parts, so these are sure to maintain their quality for many years to come. Easily installed to replace the OEM air ducts, these are a functional weight saving alternative for any Nissan GT-R.  
  • Nissan GT-R Seibon Carbon Fiber Lip Spoilers

    Nissan GT-R Seibon Carbon Fiber Lip Spoilers

    $1,280.00
    Seibon is recognized in the industry leader in aftermarket carbon fiber components, including hoods, scoops, lips, trunks, side skirts, and spoilers. These Carbon Fiber lip spoilers are a fantastic part of that line. Made in both OEM and SS styling for the front, and OEM styling for the rear. These spoiler lips are a great addition to your Nissan GT-R which can help lower your over-all car weight, improve aero-dynamics, and create increased downforce for improved handling. All of this while improving the look of your vehicle with high quality, durable, carbon fiber products! Seibon products also feature weight reducing high-quality grade AA carbon fiber, with a clear coat and UV coating to prevent fading and discoloration.
  • Nissan GT-R Front Protective Skid Plate

    Nissan GT-R Front Protective Skid Plate

    $273.32
    Full Urethane Protective Skid Plate for the Front End of the Nissan GT-R We all know the moment (and if you don't yet, it's bound to happen), where you pull into that parking stall in a hurry, clipping the parking block and hearing that dreaded grinding noise, or seeing that ridiculous driveway at a friend's house you grip the wheel ever tighter and slowly creep over it, hoping the front won’t get damaged too much. Then you hear the scraping noise, but you’ve already committed. It's a terrible terrible noise. This urethane Skid Plate protects the OEM front fascia and paint from scrapes and light bumps. This piece is specifically molded to the GT-R's front bumper, and installs with 3M automotive acrylic foam tape and self-tapping screws to the underside, quickly and easily. Durable urethane construction ensures no cracking, and doesn't require painting. The ease of install and protection this product offer make it a must have for any Nissan GT-R. Designed and Manufactured in the US.
  • Nissan GT-R R35 Carbon Fiber Spoiler

    Nissan GT-R R35 Carbon Fiber Spoiler

    $1,024.00
    This spoiler, which matches the OEM style, is a fantastic exterior upgrade manufactured of the highest quality carbon fiber by industry leader Seibon Carbon. Using the highest quality carbon fibers, Seibon is able to provide our customers with extremely stylish, strong, and lightweight body modification parts for the Nissan GT-R, and this spoiler exemplifies those characteristics. Designed to match the OEM specifications for easy install, this is a great weight-reducing exterior modification for the Nissan GT-R.
  • Nissan GT-R R35 Carbon Fiber Fender Logo

    Nissan GT-R R35 Carbon Fiber Fender Logo

    $352.00
    These carbon fiber fender duct logos for the Nissan GT-R R35, manufactured by industry leader Seibon Carbon, are small but fantastic pieces of exterior carbon fiber trim. Carbon fiber offers great structural integrity, and is extremely lightweight, which makes it fantastic for exterior body modifications, and the carbon fiber produced by Seibon Carbon is the apotheosis of these characteristics. Great strength, beauty, and weight reduction are combined in this part for the Nissan GT-R, making it an unquestionably great piece of exterior modification.
  • Nissan GT-R R35 Carbon Fiber Fender Vents

    Nissan GT-R R35 Carbon Fiber Fender Vents

    $540.00
    These Fender Vents for the Nissan GT-R are constructed from the highest quality carbon fiber by Seibon Carbon. Carbon fiber has great structural integrity and is extremely lightweight, and Seibon Carbon is an industry leader in producing carbon fiber vehicle parts, so the quality of these fender vents is unquestionable. A fantastic exterior modification for any GT-R out there.
  • Nissan GT-R R35 APR Dry Carbon Front Air Dam

    Nissan GT-R R35 APR Dry Carbon Front Air Dam

    $1,422.90
    Free Shipping
    Dry Carbon Fiber Front Lip Spoiler for the Nissan GT-R R35 2008-2010 A great addition to any R35 GT-R, made from vacuum-laid Carbon Fiber, underbody components such as front air dams, undertrays, and rear diffusers are essential for maximizing aerodynamic performance. The APR Performance Nissan GTR Front Air Dam for the R35 integrates with the factory front bumper to provide fantastic improvements in: - Lift reduction - Increasing front-end stability. - Improving high-speed cornering grip   APR Performance has been making top-end Carbon Fiber body pieces for the world's best cars for some time now, and they've built an incredible reputation upon the quality of their work. These carbon fiber pieces are crafted from the highest quality woven carbon fibers, and as such they provide incredible strength, durability, and stability in an extremely light-weight package. The look and finish of their carbon fiber is second to none! This Front Air Dam is an attractive, eye-catching, aggressive, and functional modification piece, that is as well-made and well-designed for performance as the Nissan GT-R it's meant for! This Front Air Dam also utilizes a built-in aerodynamic splitter design that creates a high-pressure region of air atop the protruding surface, further reducing lift and increasing net downforce. Integral to the Front Air Dam is a curved lower undertray design that allows for smoother underbody air flow. APR Product Warranty All merchandise manufactured by APR Performance is fully warranted against defects in workmanship and materials for one year from the time of purchase. If any product is suspected of being defective, return the product to APR Performance. APR will not accept any C.O.D. returns unless specified by an APR representative. Any item determined to be defective will be replaced. On any warranty claim, we will be responsible for APR parts only. APR is not responsible for any labor or inconvenience charges. If you have any questions about the APR Limited Warranty policy, please contact us at sales@southerncarparts.com
  • Nissan GT-R R35 Lambo Door Conversion Kit

    Nissan GT-R R35 Lambo Door Conversion Kit

    $2,640.15
    Free Shipping
    LSD is the first worldwide brand to offer a COMPLETE engineered program of application-specific Lambo Style Door conversion kits. Laser cut from high tensile steel, then shot peened and zinc plated for strength and quality finish, LSD door systems guarantee perfect fitment every time your door is lowered or closed. The exclusive industry leading Magic Stick technology with 3-dimensional adjustability allows for the ultimate in operating precision. - Crash Tested, Precision Engineered and ready to install straight out of the box, our LSD solutions take out all of the guesswork! - Full illustrated installation manual and wiring kit are also included. Package includes: - 2 LSD hinges pre-assembled complete with gas spring - Mounting hardware for the hinges - Cable sets for the extension of the wire harness incl. fitting material - Insulated cable connectors along with flexible insulation tape - German TÜV safety certificate FREE SHIPPING TO THE LOWER 48 STATES!
  • Nissan GT-R R35 Carbon Fiber Side Skirts

    Nissan GT-R R35 Carbon Fiber Side Skirts

    $1,600.00
    These Carbon Fiber Side Skirts, designed for the Nissan GT-R by industry leader Seibon Carbon, are fantastic carbon fiber body pieces which improve exterior styling, and offer weight reductions. Already one of the most impressively handling and performing vehicles made today, what better way is there to improve upon it than by replacing heavy body pieces with much lighter carbon fiber alternatives. Carbon fiber body pieces also have incredible structural integrity, just another way to show their undeniable superiority. A great piece for a great car by a great company, Seibon Carbon side skirts for the Nissan GT-R R35, what more could you ask for? Available in both OEM and SS Styling. SS: OEM:  
  • Nissan GT-R R35 Side Skirts

    Nissan GT-R R35 Side Skirts

    $644.82
    Utilizing Steve Millen's expansive racing heritage, STILLEN is proud to release functional high quality urethane Side Skirts for the Nissan GT-R R35. Enhancing the aerodynamic performance of such a finely tuned car like the GT-R is no small feat.  When developing the car Nissan did a great job of developing an aero package that works well, but left some room for improvement for the true enthusiast.  One of the most common complaints of GT-R owners is the car has a tendency to "push" when exercised hard on a race course (understeer).  Two ways to fix this condition are through the suspension, or increasing downforce via aerodynamics of the car at higher speeds.  Increasing the aerodynamic downforce keeps the front end of the car planted and therefore improving front grip, reducing the "push" effect.   Continuing the aerodynamic stabilization of the GT-R, STILLEN has developed new side skirts with a 2 inch ledge built in to apply more downforce to the car.  This design comes from the testing performed on the legendary NISSAN 300ZX, campaigned in the IMSA sports car series at Le Mans, Daytona, and Sebring.  Tested in the Lockheed Martin wind tunnel, the Nissan engineers found that by enhancing the side ledge on the rocker it applied a incremental amount of downforce at higher speeds thus keeping the car planted and more stable through high speed corners.   Another major benefit of the rockers is the greatly improved appearance.  Offering a much more aggressive look and race proven engineering these rockers are sure to catch attention and compliments.  Just like all STILLEN body work these are constructed out of durable polyurethane, ready for paint, and offer a limited lifetime warranty.  Perfect for daily driving or track days and utilize the factory skirt mounting points to ensure a perfect fit and finish.
  • Nissan GT-R R35 Mines Carbon Front Grille

    Nissan GT-R R35 Mines Carbon Front Grille

    $809.00
    Carbon Fiber Front Grille Insert Piece for the Nissan GT-R manufactured by Mine's The NEW Mines Carbon Grill presents a streamlined look with the use of the original stock bumper. The Mines Carbon Grill enhances the texture and the distinct form which their flag ship Nissan GT-R deserves.  It is made of twilled carbon with a clear coat which significantly increases the durability by blocking UV rays.  With a stock shape, the MINES Carbon Grill makes installation very easy.

1-48 of 55

Page:
  1. 1
  2. 2

Grid List

Set Descending Direction
Nissan GTR Exterior Parts

Minimal Price: $ 139.95 139.95