NOCO Genius Battery Chargers


NOCO Genius Battery Chargers

NOCO Genius Battery Chargers

Genius Maintenance Battery Chargers - Wicked Smart

NOCO's Genius Battery Chargers are wicked smart. Utilizing a simple interface with advanced battery charger technology, Genius chargers provide all of the benefits any automobile owner could want. Genius Chargers automatically diagnose, recover, charge, and maintain your vehicle batteries. Each Genius charger is powered by a NOCO VosFX Processor which helps control the many intelligent features of the battery charger. Chargers feature brilliant displays which quickly and easily show the battery's charge level and tend rates.

Genius Battery Chargers are housed in rugged cases that ensure that they'll remain safe and working for years and years to come. Genius Battery Chargers also feature built-in fuse protection. What this means is that a Genius Battery Charger can be set and forgotten about and will allow you to intelligently and safely charge your automotive battery. Perfect for your sports car, truck, or SUV.

4 Item(s)

Grid List

Set Descending Direction
  • G3500 NOCO Genius Battery Charger

    G3500 NOCO Genius Battery Charger

    $69.95
    The G3500 is a smart, 8 Step, fully automatic switch-mode battery charger and maintainer. The G3500 restores batteries to their original capacity, recovers slightly sulfated batteries, charges batteries in cold climates, rescues drained batteries and provides maintenance charging to increase battery life. A versatile battery charger that provides charging modes for both large and small batteries from 1.2-120Ah, such as Cars, RVs, Boats and Trucks, as well as for Motorcycles, ATVs, Jet Skis or Snowmobiles. Step 1: Diagnostics Checks the battery voltage to make sure battery connections are good and the battery is in a stable condition before beginning the charge process. Step 2: Recovery Initializes the Recovery process, if needed, for deeply discharged or sulfated (desulfation) batteries by pulsing small amounts of current. Step 3: Soft Start Begins Bulk charging process with a gentle (soft) charge. Step 4-5: Bulk The Bulk charging process continues using both a High Rate and Medium Rate charge and returns 80% of battery capacity, indicated by the 25%, 50% and 75% CHARGE LEDs. Step 6: Absorption Brings the charge level to 90%. The battery charger will deliver small amounts of current to provide a safe, efficient charge and limit battery gassing. Step 7: Trickle Battery is fully charged and ready to use, indicated by the 100% CHARGE LED being a solid Green. In this step, the battery charger will only deliver enough current to keep the battery full. If the battery tells the charger that more current is needed, the battery charger will switch to Maintenance. Step 8: Maintenance Continuously monitors the battery voltage to determine if a maintenance charge should be initiated. If the terminal voltage falls below 6.4V (6V) and 12.8V (12V), the charger will start the Maintenance cycle until voltage reaches 7.2V (6V) and 14.4V (12V) and then discontinues the charge cycle. The cycle between Trickle and Maintenance is repeated indefinitely to keep the battery at full charge, without overcharging. The battery charger can be left connected indefinitely. COMFORT CABLE CLAMPS Ergonomically designed to make battery connecting and disconnecting effortless. Features a fully insulated over-mold casing with strain relief ends to alleviate unwanted tension on cable leads. EXTENDABLE CONNECTORS Connecting and disconnecting accessory leads has never been easier! A uniquely designed interchangeable connector allows accessories to be properly mated and fastened with a snap-lock latch. BUILT-IN FUSE PROTECTION   Each battery connection accessory features an over-molded inline fuse to increase user safety by protecting the battery charger from potentially dangerous short circuits. RUGGED ENCLOSURE Made from a rugged polymer for high-impact resistance for some of the harshest and most demanding working environments.     G3500 Charger Battery Clamp Connectors Eyelet Terminal Connectors Owner's Manual & User Guide Product Registration Card The time required for the G3500 to charge a normally discharged battery is shown below. Deeply discharged batteries may take longer to charge depending on the depth of discharge (DOD). The charge time is based on an average depth of discharge to a fully charged battery. Note: The above table is for reference purposes only. Actual data may differ due to battery conditions. The time required for the G3500 to charge a normally discharged battery is based on an average DOD of 50%.     G3500 TECHNICAL SPECIFICATIONS Input Voltage AC 110-120 VAC, 50-60Hz Working Voltage AC 85-130 VAC, 50-60Hz Input Current 1200mA RMS Max Efficiency 85% Approx. Power 60W Max Charging Voltage 7.2/14.4, 7.4/14.7V (Cold/AGM) Charging Current 3500mA (Large), 900mA (Small) Back Current Drain <5mA Ripple <2% Ambient Temperature 0°C to +40°C Charger Type 8 Step, Fully Automatic, Switch-Mode Type of Batteries 6V & 12V Lead-Acid Battery Chemistries Wet, Gel, MF & AGM Battery Capacity 14-120Ah (Large), 1.2-14Ah (Small), Maintains All Battery Sizes Housing Protection IP65 Cooling Natural Convection Noise Level <50dB Dimensions (L x W x H) 7.7 x 2.7 x 1.9 Inches Weight 1.1 Pounds
  • G750 NOCO Genius Battery Charger

    G750 NOCO Genius Battery Charger

    $31.95
    The G750 is a smart, 5 Step, fully automatic switch-mode battery charger and maintainer. The G750 is best for small battery applications from 1.2-30Ah, such as charging your Motorcycle, ATV, Jet Ski or Snowmobile. In addition to charging, the G750 can effectively maintain any 6V or 12V batteries in larger applications, such as Cars, RVs, Boats and Trucks. Step 1: Diagnostics Checks the battery voltage to make sure battery connections are good and the battery is in a stable condition before beginning the charge process. Step 2: Soft Start Begins Bulk charging process with a gentle (soft) charge. Step 3: Bulk Continues Bulk charging process, returns 90% of battery capacity. Step 4: Absorption Brings the charge level to 100%. The battery charger will deliver small amounts of current to provide a safe, efficient charge and limit battery gassing. Step 5: Maintenance Monitors the battery voltage continuously to determine if a maintenance charge should be initiated. If the terminal voltage falls below approximately 6.4V (6V) and 12.8V (12V), the charger will start the Maintenance cycle until voltage reaches approximately 7.2V (6V) and 14.4V (12V) and then will discontinue the charge cycle. Maintenance cycle is repeated indefinitely to keep the battery at full charge, without overcharging. The battery charger can be left connected indefinitely. COMFORT CABLE CLAMPS Ergonomically designed to make battery connecting and disconnecting effortless. Features a fully insulated over-mold casing with strain relief ends to alleviate unwanted tension on cable leads. EXTENDABLE CONNECTORS Connecting and disconnecting accessory leads has never been easier! A uniquely designed interchangeable connector allows accessories to be properly mated and fastened with a snap-lock latch. BUILT-IN FUSE PROTECTION   Each battery connection accessory features an over-molded inline fuse to increase user safety by protecting the battery charger from potentially dangerous short circuits. RUGGED ENCLOSURE Made from a rugged polymer for high-impact resistance for some of the harshest and most demanding working environments.     G750 Charger Battery Clamp Connectors Eyelet Terminal Connectors Owner's Manual & User Guide Product Registration Card The time required for the G750 to charge a normally discharged battery is shown below. Deeply discharged batteries may take longer to charge depending on the depth of discharge (DOD). The charge time is based on an average depth of discharge to a fully charged battery. Note: The above table is for reference purposes only. Actual data may differ due to battery conditions. The time required for the G750 to charge a normally discharged battery is based on an average DOD of 50%.     G750 TECHNICAL SPECIFICATIONS Input Voltage AC 110-120 VAC, 50-60Hz Working Voltage AC 85-130 VAC, 50-60Hz Input Current 300mA RMS Max Efficiency 85% Approx. Power 20W Max Charging Voltage 7.2V/14.4V Charging Current 750mA Back Current Drain <5mA Ripple <2% Ambient Temperature 0°C to +40°C Charger Type 5 Step, Fully Automatic, Switch-Mode Type of Batteries 6V & 12V Lead-Acid Battery Chemistries Wet, Gel, MF & AGM Battery Capacity 1.2-30Ah, Maintains All Battery Sizes Housing Protection IP60 Cooling Natural Convection Noise Level <50dB Dimensions (L x W x H) 4.5 x 2.7 x 1.3 Inches Weight 0.5 Pounds  
  • Genius Battery Charger 12V Lighter Plug Connector

    Genius Battery Charger 12V Lighter Plug Connector

    $12.95
    Fits G750-G3500 The GC003 12V Plug Connector works with NOCO Genius battery chargers and allows the battery chargers to charge and maintain your vehicle's battery by simply plugging into the 12V auxiliary plug/cigarette lighter. The Quick Connect cable makes connecting the 12V Plug Connector simple. Ideal for motorcycles where the battery compartment is difficult to access. This 12V Plug Connector allows for the easiest and most time effective way of hooking up and unhooking your NOCO Genius Battery Charger to any vehicle you may have. Works with all standard 12V Cigarette Lighters. Does not change Genius Battery Charger functionality in any way.
  • G1100 NOCO Genius Battery Charger

    G1100 NOCO Genius Battery Charger

    $44.95
    The G1100 is a smart, 7 Step, fully automatic switch-mode battery charger and maintainer. The G1100 is best for small battery applications from 2.2-40Ah, such as charging your Motorcycle, ATV, Jet Ski or Snowmobile. In addition to charging, the G1100 can effectively maintain any 6V or 12V batteries in larger applications, such as Cars, RVs, Boats and Trucks. Step 1: Diagnostics Checks the battery voltage to make sure battery connections are good and the battery is in a stable condition before beginning the charge process. Step 2: Recovery Initializes the Recovery process, if needed, for deeply discharged or sulfated (desulfation) batteries by pulsing small amounts of current. Step 3: Soft Start Begins Bulk charging process with a gentle (soft) charge. Step 4: Bulk The Bulk charging process continues and returns 80% of the battery capacity. Indicated by the 25%, 50% and 75% CHARGE LEDs. Step 5: Absorption Brings the charge level to 90%. The battery charger will deliver small amounts of current to provide a safe, efficient charge and limit battery gassing. Step 6: Trickle Battery is fully charged and ready to use, indicated by the 100% CHARGE LED being a solid Green. In this step, the battery charger will only deliver enough current that the battery needs. If the battery tells the charger that more current is needed, the battery charger will switch to Maintenance. Step 7: Maintenance Continuously monitors the battery voltage to determine if a maintenance charge should be initiated. If the terminal voltage falls below 6.4V (6V) and 12.8V (12V), the charger will start the Maintenance cycle until voltage reaches 7.2V (6V) and 14.4V (12V) and then discontinues the charge cycle. The cycle between Trickle and Maintenance is repeated indefinitely to keep the battery at full charge, without overcharging. The battery charger can be left connected indefinitely. COMFORT CABLE CLAMPS Ergonomically designed to make battery connecting and disconnecting effortless. Features a fully insulated over-mold casing with strain relief ends to alleviate unwanted tension on cable leads. EXTENDABLE CONNECTORS Connecting and disconnecting accessory leads has never been easier! A uniquely designed interchangeable connector allows accessories to be properly mated and fastened with a snap-lock latch. BUILT-IN FUSE PROTECTION   Each battery connection accessory features an over-molded inline fuse to increase user safety by protecting the battery charger from potentially dangerous short circuits. RUGGED ENCLOSURE Made from a rugged polymer for high-impact resistance for some of the harshest and most demanding working environments.     G1100 Charger Battery Clamp Connectors Eyelet Terminal Connectors Owner's Manual & User Guide Product Registration Card The time required for the G1100 to charge a normally discharged battery is shown below. Deeply discharged batteries may take longer to charge depending on the depth of discharge (DOD). The charge time is based on an average depth of discharge to a fully charged battery. Note: The above table is for reference purposes only. Actual data may differ due to battery conditions. The time required for the G750 to charge a normally discharged battery is based on an average DOD of 50%.     G1100 TECHNICAL SPECIFICATIONS   Input Voltage AC 110-120 VAC, 50-60Hz Working Voltage AC 85-130 VAC, 50-60Hz Input Current 600mA RMS Max Efficiency 85% Approx. Power 30W Max Charging Voltage 7.2/14.4, 7.4/14.7V (Cold/AGM) Charging Current 1100mA Back Current Drain <5mA Ripple <2% Ambient Temperature 0°C to +40°C Charger Type 7 Step, Fully Automatic, Switch-Mode Type of Batteries 6V & 12V Lead-Acid Battery Chemistries Wet, Gel, MF & AGM Battery Capacity 2.2-40Ah, Maintains All Battery Sizes Housing Protection IP65 Cooling Natural Convection Noise Level <50dB Dimensions (L x W x H) 6.1 x 2.5 x 1.6 Inches Weight 0.8 Pounds

4 Item(s)

Grid List

Set Descending Direction