0
items
Your cart is empty
Subtotal:$0.00
|
Fits Jeep TJ Wide Rear CRD60 Full-Float w/ 8x6.5 " Pattern 4.30 R and P and ARB Super 60 97-06 Wrangler TJ TeraFlex
The heavy-duty TeraFlex TJ Wide Rear CRD60 Full-Float Axle Housing provides maximum protection, performance, and durability for the TJ Wrangler, while the exclusive Constant Radius Design (CRD) provides high ground clearance that is unaffected by pinion angle adjustments.
Full-float axle design and 8x6.5 inch wheel bolt pattern engineered to tackle the most extreme conditions.
The CRD60 is equipped with the same features included in all of our axles including a heavy-duty housing with heavy-duty axle tubes and bearing caps, high-flow oil passages, bracketry, smooth profile surfaces, and increased cover mounting area. Pre-installed inner seals and upper control arm bushings make the upgrade seamless.
The TeraFlex TJ CRD60 Axle Housing is a direct bolt-on upgrade for TJ Wrangler owner looking to beef up or replace a bent broken, or damaged stock rear axle in TJ Wrangler and Rubicon vehicles. Compatible with all Super 60 gear ratios for extreme duty applications requiring additional ring and pinion strength.
Details:
- SKU: 3906430
- Lift Height: 0-6 Inches
- Width: 67 Inches WMS-WMS (Wide)
- Axle Tube: 3.25 inches x 0.375 inch
- Ring and Pinion: 4.30
- Wheel Bolt Pattern: 8 x 6.5 Inch
Fits:
- TJ Wrangler - rear
- LJ Wrangler Unlimited (Long Wheelbase) - rear
Includes:
- ARB Super 60 air locker
- Spicer Ring and Pinion - 4.30
- Spicer Bearings and Install Kits
- 1350 series pinion yoke
- 35-spline axle shafts
- Big Rotor Kit w/ 13.3 inch rotors
- Sold As An Assembly
Features and Benefits:
- Extreme duty full-float design
- 3.25 Inch O.D. x 0.375 inch wall axle tube for superior strength vs weight
- Rear CRD60 specific high-pinion axle housing design
- Pre-installed axle seals
- Ductile cast iron housing w/ increased rib gussets
- HD ductile iron differential cover
- Constant Radius Design (CRD) provides maximum ground clearance regardless of pinion angle
- Smooth radius bottom design to glide over rocks and obstacles
- HD bearing caps increase rigidity and reduce ring and pinion distortion
- Premium UV protected triple-stage powdercoat for superior corrosion resistance
- Built-in skimmer cuts ring gear oil halo and forces it into the pinion bearings
- The front pinion bearing pocket features a renewable oil reservoir that sends cool oil to the pinion bearing
- Oversize front pinion bearing handles increased torque and high-load conditions
- High-capacity housing holds 3 quarts of oil
- 1/4 inch thick CNC laser cut axle brackets for extreme strength
- Reinforced rear track bar mount with multiple mounting locations
- Proper pinion angle for lifted TJ applications
- Pre-drilled holes for limit straps and lower spring retainers
- 100 percent engineered, designed, and built in the USA
- 100 percent new components
- 1-Year / Unlimited Mileage Warranty
Notes:
- Install Time: 4.5 Hours
- Requires driveshaft modification
- This is a very heavy item and must be shipped by freight truck
- ManufacturerTeraFlex
- ASINn
- BrandTeraFlex
- Configurator StatusNo
- Covercraft StatusNo
- Disable loading on additional productsNo
- Disallow Use of CouponsNo
- GUIDAB-3906430-PRM
- MPN3906430
- Part Number_3332243906430
- Select FeaturedNo
- UPC843885040590
Shipping
We utilize UPS, Fedex, and USPS for all of our shipping needs. Carrier choice is based upon availability and needs of the customer and is the sole discretion of SouthernCarParts. We always try to ship within 24 hours of order placement (do to the custom nature of some products, shipping within 24 hours is impossible, actual shipping time frames will be listed in the product description). Please keep in mind that some products such as Custom Fit Car Covers, Lloyds Floor Mats, Painted accessories, and Racemesh Products can take 3 -10 days to ship and are charged at time of order placement. Racemesh products take 4 weeks to ship as they are made to order.
Returns
Should you need to return a part for refund, exchange, or credit, please contact our returns department within 30 days of purchase at orders@southerncarparts.com for a Return Merchandise Authorization (RMA) number. Most problems, such as installation, can be solved with a telephone call (888-631-1433). Southern Car Parts will not accept returned goods without prior authorization and an RMA# written clearly on the exterior of the box. The customer is responsible for freight on all return orders. Parts authorized to be returned, on a non-exchange basis, are subject to a 20% restocking fee. Returns will only be accepted within 30 days of the original date of shipment. Custom painted parts - Once these parts are started, we can refund you less the paint(chemicals) that have been used. Exception is rear spoilers and front splitters, we can refund less 20%.
Custom-made-to-order items are NOT returnable. This includes embroidered floor mats and car covers.
Damages in Shipping
All damages from shipping must be reported to Southern Car Parts within two business days from tracking number delivery confirmation. After two business days, damages become the responsibility of the customer.