Webelectric


5 Item(s)

Grid List

Set Descending Direction
  • 2008-2014 Dodge Challenger Sequential Tail Lights Kit

    2008-2014 Dodge Challenger Sequential Tail Lights Kit

    $149.95
    Free Shipping
    Most Dodge Challenger owners never settle for the status quo. If you only Challenger in which a very good chance you're looking to add on either performance modifications or aesthetic improvements throughout the car. One of the most popular and best-looking modifications that can be added to a Challenger is a new set of sequential taillights. Set of sequential signals is simply a great way to really add more character and more flair to the overall dimension of your Mopar. These 2008-2014 Dodge Challenger sequential taillight kits are sure to raise your Challenger to a new level.  These 2008-2014 Dodge Challenger sequential taillight kits will convert the taillights on your 2008-2014 Dodge Challenger into Sequential Turn Signals.  This Challenger sequential tail light kit contains pre-wired, plug-in harnesses that install with no wire cutting or splicing of any kind! These harnesses feature sophisticated electronics that automatically adjust the sequencing speed to match the turn signal flasher in your car.  While other products offer you fixed timing or complicated manual adjustments, our electronics sense your Challenger's flasher speed and adjust the sequence timing for you. These lights will fit any 2008-2014 Dodge Challenger, including SE, R/T and SRT8 (2011 - 2014 Dodge Challenger Models require cutting) Dodge Challenger Sequential Tail Lights are a very simply way to give your Mopar a fresh new look. We've had customers purchase these and actually write us a letter thanking us for such a cool product. We hope you take a good look at these turn signals, they are very easy to install and will really elevate your Dodge Challenger to another level.  You can go one step further and add blacked out lamp covers to run along side of these sequential turn signals. We've seen this combination on a few Challengers and looks very sharp. Frequently asked questions:*do I have to know a lot about vehicle electronics to properly install these Challenger sequential taillights?-No, most folks can install these sequential lights in their driveway or in the garage as you're truly a plug-and-play product. You certainly do not have to know about electronics and you do not need to be an electrician. *Will these Mopar sequential taillights void or ruin my factory warranty in any way?-No, these have no effect on your factory warranty, these are simple plug-and-play product that can be installed or removed without any implications to your factory Mopar warranty. *I see these fit it 2008 – 2014 Challenger, if I have another year Challenger will these work?-No, these are made specifically for the 2008 through 2014 model years only.
  • 2008-2018 Dodge Challenger 3rd Brake Light Pulser

    2008-2018 Dodge Challenger 3rd Brake Light Pulser

    $59.00
    Dodge gave your Challenger a great set of brakes. There is a good chance that your brakes can stop you faster than the car that is behind you can. Your Challenger goes from 60 to 0 in 110 feet !!. Will the driver behind you be ready to stop when you do? The BLP-1CH pulser module can give you the extra measure of safety you need. These devices are full "Plug-N-Play" harnesses that simply plug into your existing Center High Mount Brake Light. There are no wires to cut, and no adjustments to make. The module automatically pulses your third brake light when you apply your brakes. The light will pulsate on and off for about a second, then stay on steady for as long as you press the brake pedal. The unit is designed to create a gentle fluttering of light, so your car is more noticeable, yet it doesn't aggravate the driver behind you (notice how you can see it flashing, even while reading text up here!). The "Delay-Repeat" circuit means the brake lights have to be off for at least 15 seconds before the cycle can be restarted. So, if you are in bumper-to-bumper traffic, the brake light isn't always pulsing Application: 2008, 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018 Dodge Challenger  
  • C5-C6 Corvette 3rd Brake Light Pulser

    C5-C6 Corvette 3rd Brake Light Pulser

    $59.00
    If you are thinking about the car behind you and wondering if it will stop in time when you hit the brakes you can give yourself the peace of mind that a pulsing brake light will add that extra bit of attention-grabbing light to your car. This simple plugin module is a quick and easy way to make your Corvette more noticeable in traffic. Corvette is low and not always seen by the driver behind you. The BLP-1C5 and BLP-1C6 pulser modules can give you an extra measure of safety! These devices are full "Plug-N-Play" harnesses that simply plug into your existing Center High Mount Brake Light. There are no wires to cut, and no adjustments to make. The module automatically pulses your third brake light when you apply your brakes. The light will pulsate on and off for about a second, then stay on steady for as long as you press the brake pedal. The unit is designed to create a gentle fluttering of light, so your car is more noticeable, yet it doesn't aggravate the driver behind you (notice how you can see it flashing, even while reading text down here!).  The "Delay-Repeat" circuit means the brake lights have to be off for at least 15 seconds before the cycle can be restarted. So, if you are in bumper-to-bumper traffic, the brake light isn't always pulsing. Application: 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004 C5 Corvette Application: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette    
  • Mustang 2005-09 Sequential Tail Light Harness

    Mustang 2005-09 Sequential Tail Light Harness

    $139.00
    Free Shipping
    Ford Mustang Complete Sequential Tail Light Harness Kit for the 2005-2009 Mustang The STS-1MSS Sequential Harnesses have been specifically designed to work in your 2005 through 2009 Mustang. These harnesses are made with the proper grommet, connector and clips, so you know the fit will be perfect!  With Smart-Sequence technology, your tail lights sequence ONLY when a signal is on. When you hit the brakes, all lamps come on at once -- JUST LIKE THE 2010 MUSTANG!  All Pre-wired Harnesses feature sophisticated electronics that automatically adjust the sequencing speed to match the turn signal flasher in your car. While other products offer you fixed timing or complicated manual adjustments, our electronics sense your car's flasher speed and adjust the 1-2-3 sequence timing for you. Don't waste your money on cheap imitations. Buy the best! With Lifetime Warranty!  Fully Pre-Wired Harnesses for your  2005 through 2009 Mustang   Smart-Sequence Technology   Self-Adjusting Electronics assures  Perfect Sequencing Action! Application: 2006, 3006, 2007, 2008, 2009 Ford Mustang
  • 2010-2014 Mustang Convertible One-Touch Top Module

    2010-2014 Mustang Convertible One-Touch Top Module

    $49.95
    Free Shipping
    The 2010-2014 Ford Mustang #OTT-1M One-Touch Top Module from Southern Car Parts adds a convenient One-Touch feature to the Convertible Top of your 2010+ Ford Mustang. To raise or lower your top, you just "touch" and release the switch. The top will raise or lower to the end, then shut off properly. In addition to the one-touch feature, this module has a built-in connection to turn off your light bar (if installed) when the top is up. You can always count on Southern Car Parts to carry the newest and hottest parts and accessories to get the most performance and style from your 2010-2014 Mustang. Application: 2010, 2001, 2012, 2013, 2014 Ford Mustang

5 Item(s)

Grid List

Set Descending Direction
Webelectric

Minimal Price: $ 49.95 49.95