The latest addition to the BMW M series is the awe-inspiring M3/M4, an exquisite high-performance car that can be made even better by adding an Akrapovič Slip-On exhaust system. Made from titanium—with some parts cast in Akrapovic’s own foundry—it has bigger pipes than the stock exhaust, yielding lower back pressure and more power, especially at lower RPMs. This system is a completely new design, and it will reduce overall vehicle weight and deliver extra power and a sporty sound, which has been tailored to highlight lower frequencies and increase the listening enjoyment. Increases in both power and torque add to the sensory experience, combined with improved agility. The look of the Slip-On system can also be further enhanced by adding titanium or carbon- tailpipes and the stunning carbon- rear diffuser.   Sound Clips   UNIT STOCK AKRAPOVIČ MAX GAIN maximum power kW 327.7 at 6250 rpm 331.5 at 6600 rpm + 5.4 at 4400 rpm HP (m) 445.6 at 6250 rpm 450.7 at 6600 rpm + 7.3 at 4400 rpm HP (i) 439.5 at 6250 rpm 444.5 at 6600 rpm + 7.2 at 4400 rpm maximum torque Nm 583.1 at 3900 rpm 584.6 at 4000 rpm + 17.4 at 2350 rpm lb-ft 430.1 at 3900 rpm 431.2 at 4000 rpm + 12.8 at 2350 rpm weight kg 20.0 17.0 - 3.0 lb 44.1 37.5 - 6.6 %     - 15.0 installation time min   150

The Akrapovic BMW M6 Grand Coupe Titanium Evolution system is made of Akrapovic's proprietary titanium and consists of newly developed dual-outlet mufflers with exhaust valves, flow-optimized pipes, and a unique cast titanium X-shaped part with resonators. The BMW exhaust back pressure is lowered and the M6 Grand Coupe benefits from more power throughout the entire range of rpms. The Akrapovic BMW exhaust increases responsiveness and an improved power-to-weight ratio has been achieved without removing the catalytic converters. The Akrapovic Evolution exhaust offers a deep sporty sound, growing to an aggressive roar when driven hard but without and cabin drone. It works well with the M6 Grand Coupe ANC system - just like the valve system, which is regulated through the M6 Grand Coupe settings. The Akrapovic BMW exhaust comes complete with your choice of Titanium or Carbon Fiber tips. You can expect a 7-10 hp increase with the Akrapovic system on your M6 (F06) and 27lb's in weight reduction. TECHNICAL DATA UNIT STOCK AKRAPOVIC MAX. GAIN maximum power kW 413.4 at 5950 rpm 420.3 at 5950 rpm + 7.4 at 5950 rpm HP (m) 562 at 5950 rpm 571.5 at 5950 rpm + 10 at 5950 rpm HP (i) 554.3 at 5950 rpm 563.7 at 5950 rpm + 9.9 at 5950 rpm maximum torque Nm 733.5 at 4700 rpm 739 at 4650 rpm + 17 at 5200 rpm lb-ft 541 at 4700 rpm 545.1 at 4650 rpm + 12.5 at 5200 rpm weight kg 38 25.7 - 12.3 lb 83.8 56.7 - 27.1

Titanium Complete Akrapovic Evolution Exhaust for the BMW 1M The Akrapovic Evolution exhaust system for the BMW 1M consists of the Akrapovic Mufflers (Slip On System) made entirely of light-weight, aircraft grade titanium and the Titantium link pipes with resonators that complete this amazing performance exhaust kit. The entire system is made from Titanium and reduces the overall weight when compared to stock by an incredible amount! This exhaust is certain to give your new and exciting BMW 1M an improved, more aggressive exhaust tone while also improving its HP and Torque numbers across the entire RPM range. Ultimately, these bonuses will make for a lighter, quicker, and more intimidating 1M than any other on the road. Power increases are realized from as low as 2,500 rpm all the way to redline, and the majority of these gains occur between 3,000 and 6,500 rpm with a proper exhaust, such as this one. This is a substantial increase over a very wide rpm range, and so it increases responsiveness during all phases of driving. These sorts of increases are what has become common place for the industry leading Akrapovic, whose dedication to the highest quality exhausts has made them one of the world's finest. With Akrapovic, you're getting the very best available for your car.     At Akrapovic they have developed several different configurations to suit all tuning applications. The basis of all the configurations is our Akrapovic Titanium Slip-On system. Utilizing a single muffler arrangement, the Slip-On exhaust is designed to be modular. In its basic mode, all exhaust gases flow through the main body of the muffler, giving you a deeper rumble of an exhaust note compared to stock without any drone. In Europe this system meets TÜV standards for noise. However, the muffler system is built in such a way that by replacing a blocking plate with our Wireless Kit valve system the driver is able to noticeably increase the volume of the exhaust at the press of a button. Once activated, the majority of the exhaust gases route through the muffler bypass outlets.   Building on the modular theme, the Akrapovic Evolution System includes the Slip-On and then adds titanium link pipes to it with resonators that run from the stock downpipe back. These link pipes feature larger-than-stock-diameter tubing and cast titanium flanges that are made at our in-house foundry for a perfect fit. In addition, the secondary catalysts are removed, further decreasing backpressure and weight while at the same time deepening the exhaust tone and increasing power output. No ECU reprogramming is required in this configuration. The check engine light will not be triggered. The Wireless Kit mentioned in the Slip-On description can also be used with the Evolution System.   For the ultimate in weight reduction, tuning potential, and racing sound, Akrapovic offers stainless steel, catless downpipes. When used in conjunction with the Evolution System, this is virtually the same setup used on the 1M Moto GP Safety Car. The high-flow downpipes do require ECU reprogramming to eliminate the check engine light and for peak power output. They are only for the dedicated track day car or hardcore enthusiasts.   One of the most important aspects of driving a high performance European sports car is the way it sounds. At Akrapovic countless hours are spent making sure the systems they produce have unmatched acoustics. Simply making the exhaust louder than stock is not the answer. Designing a system that delivers a deep, rich growl at cruising speeds while also allowing the driver to enjoy an aggressive roar when driven hard is our goal. All of this is done without introducing any droning or harshness that could ruin the driving experience. In short, Akrapovic makes sure the car sounds the way it was always meant to.     All 1M systems are available with either titanium or carbon fiber tail pipes. Also available are optional, improved, Stainless Steel downpipes which help open up the exhaust for even greater air flow and higher performance numbers. Akrapovic offers a complete exhaust valve control switch for this system as well that allows the driver to take complete control over the bi-modal exhaust valves, regardless of their RPMs. Please select your exhaust options from the drop-down menus below.     This system is still finishing production and will be officially available in Early October of 2011. The first production run is limited, so the sooner you order the more guaranteed you are to receive one of the first systems produced. We here at Southern Car Parts are proud to be among the first in line to receive these brand new, 1M Akrapovic exhaust systems. There will be a limited number of Akrapovic systems produced. We are taking pre orders now for this amazing exhaust for the new 1M.

Akrapovic Stainless-Steel Evolution Exhaust System for the 2007+ E90, E91, and E92 BMW 335i Our engineers developed a complete aftermarket exhaust system which pushes this powerful Bavarian ahead of the pack. The next stage in revolutionizing the performance of the BMW 335i, past the Slip-On option is the great Evolution exhaust system – a must have for all drivers of this civilian rocket from Munich. This system, which is made entirely of stainless steel, gives the BMW 335i more power and weighs less that offers an even better on-road performance. With an Akrapovic exhaust system you can rest assured that you're getting the absolute best available exhaust for your vehicle. For years, Akrapovic has made a name for themselves with professional motorcycle and automobile racing configurations, and they bring this race knowledge to the design and production of their other exhaust systems. The Akrapovic exhaust for the 335i provides the vehicle with an unrivaled improvement in exhaust tonal quality that crescendoes beautifully up through the entire RPM range, and the large titanium exhaust tips give the vehicle a more pronounced and aggressive look that is sure to help the vehicle turn even more heads than it already does. In addition to these incredible tonal and appearance benefits, the Akrapovic exhaust will provide your BMW 335i with incredible performance gains through the entire RPM range. With all of these incredible benefits packaged together in a single exhaust system, you can be absolutely certain that you're getting your money's worth when you purchase an Akrapovic exhaust system. Akrapovic systems are only the best exhaust systems available on the market, and are made for only the best cars--a match made in automotive heaven.   Measurements of the Evolution exhaust system on the BMW 335i show we made no compromises. That can be seen in additional power of 12 HP (at 5.980 rpm) and 12 ft/lbs of torque (at 2.910 rpm). But it is not all about providing more peak power. One can also observe noticeable refinements to the whole rpm range from 2.500 rpm to over 6.500 rpm. From 2.000 rpm to 3.000 rpm, the power is delivered homogeneously. Reducing backpressure causes improvement of throttle response and turbine response. Made entirely of stainless steel, the Evolution exhaust system sounds very sporty and reflects the formidable nature of the powerful six-pot engine. Evolution system: stainless steel crossover tubes stainless steel end muffler 2 titanium tail pipes Hard facts: plus 12 HP (at 5.980 rpm) plus 12 ft/lbs (at 2.910 rpm)

Looking for the best exhaust tips available? The Akrapovic TP-CT/26 Carbon Fiber package is simply the top of the line carbon fiber. These Akrapovic exhaust tips come complete with clamps to clamp onto your new high performance exhaust for your BMW M3 (F80) 2014-2017. Southern Car Parts is one of the leading retailers for Akrapovic exhaust systems, because of this we keep many systems in stock. These exhaust tips, if ordered before 10am EST will ship on the same day. As with all Akrapovic exhaust parts, these ship UPS Ground for FREE to the lower 48 states. Directly from Akrapovic: As the most visible part of an exhaust system, we pay the utmost attention to the tailpipes. Akrapovič has created hand-crafted carbon-fibre tailpipes to enrich the visual enjoyment of the Slip-On or Evolution exhaust systems. Sporting the unique Akrapovič round design, the carbon- version has sandblasted titanium inner parts with a bigger diameter than stock tailpipes to make them stand out from the crowd even more. The new model was unveiled with distinctive Akrapovič design elements, and these beautifully crafted additions are designed to fit perfectly with the carbon- diffuser. Application: BMW M3 (F80) 2014, 2015, 2016, 2017

The Akrapovič Evolution line exhaust systems can be further enhanced with an optional hand-crafted carbon-fiber rear diffuser. Developed by Akrapovič’s Design Department, this stunning diffuser, crafted from materials developed through Akrapovič’s racing involvement, is designed to perfectly fit the lines of the unique tailpipes of the Evolution system, as well as complement the sleek and sporty shape of the BMW. Southern Car Parts has this diffuser ready to ship and offers it at the lowest price possible. Application: 2015 BMW X5 M

2014-2015 BMW M3 M3 F80 F82 Akrapovic Titanium Evolution Exhaust System The Evolution performance exhaust system for the BMW consists of a single-central muffler with valves and bigger link pipe tubes with a middle muffler, all designed to make the performance and workmanship of the Evolution as perfect as its looks. With no second set of cats—(unlike the stock system), the whole system is designed to give the smoothest flow—and the power and torque gains of the BMW with the Evolution system are simply amazing. Crafted entirely from titanium, the Evolution system has a unique sound to complement its substantial increase over a very wide rpm range. In-depth engineering has produced a sound completely different from the stock system, giving a deep and sporty sound – with no unwanted overtones or drone, and also a significant change to the sound with the valves in the open or closed positions. The Evolution system needs no re-programming of the ECU because it doesn’t trigger any warning lights. With tailpipes in titanium or carbon, and a handcrafted rear diffuser, all available as optional extras, the BMW Evolution is as beautiful as it is powerful.   As the most visible part of an exhaust system, we pay the utmost attention to the tailpipes. Akrapovič has created special titanium or carbon fiber tailpipes to enrich the visual enjoyment of the Slip-On or Evolution exhaust systems. Sporting the unique Akrapovič round design, the titanium version combines polished and sandblasted titanium and a bigger diameter than stock tailpipes to make them stand out from the crowd even more. The new model was unveiled with distinctive Akrapovič design elements, and these beautifully crafted additions are designed to fit perfectly with the carbon- diffuser.

Akrapovic Titanium Evolution Exhaust System for the 2012+ F12 Chassis BMW M6 The engineering masterpiece in the form of the new M TwinPower Turbo M6 has been a welcome challenge to the Akrapovic R&D department, which is responsible for developing truly amazing exhaust systems that offer more power, weigh less, and have an EC type-approval stamp at the same time. The new Evolution exhaust system for the BMW M6 F12 consists of newly developed dual-outlet mufflers with exhaust valves, flow-optimized pipes, and a unique cast titanium X-shaped part with resonators. The X-pipe, valves, and flange assembly are produced in the state of the art Akrapovic Foundry out of the world's highest quality materials and with a particular focus on exhaust tone and performance. To top off this work of art, we’ve got polished titanium and aerospace-grade carbon fiber tail pipes to choose from. Each pipe features the world's finest material components and is constructed with the greatest care for a final product that is a true work of art that you'll be proud to display on your M6. The Evolution system lowers the back pressure and gives the M6 more power and torque through the whole range of rpms. It also works to increase responsiveness when driving. The Evolution system offers an even greater difference in weight, improving the power-to-weight ratio by utilizing light-weight titanium materials and efficient piping design. Horsepower and Torque gains are achieved without removing the catalytic converters. What this all means is that a complete Akrapovic exhaust system for the M6 will provide enhanced performance numbers by lightening the vehicle and giving it extra power at the same time, and will also make driving your M6 a greater pleasure by improving exhaust  sound and vehicle responsiveness and throttle response. While developing this system, Akrapovic especially focused on sound. An M6 with the Evolution system delivers a deep, aggressive roar when driven hard, coaxing bangs out of the unique tail pipes when shifting and going off the throttle. To top it all off, the Evolution system is drone free and works well with the M6's Active Noise Cancellation system—just like the valve system, which is regulated through the M6’s settings.

Titanium Complete Akrapovic Slip-On Exhaust for the BMW 1M   The Slip-On Akrapovic exhaust system for the BMW 1M consists of light-weight, aircraft grade titanium, newly developed dual-outlet mufflers . The entire system is made from the highest quality Titanium and reduces the overall weight when compared to stock by an incredible amount! This exhaust is certain to give your new and exciting BMW 1M an improved, more aggressive exhaust tone while also improving its HP and Torque numbers across the entire RPM range. Ultimately, these bonuses will make for a lighter, quicker, and more intimidating 1M than any other on the road. Power increases are realized from as low as 2,500 rpm all the way to redline, and the majority of these gains occur between 3,000 and 6,500 rpm with a proper exhaust, such as this one. This is a substantial increase across a very wide rpm range, and as such it increases responsiveness during all phases of driving. These sorts of increases are what has become common place for the industry leading Akrapovic, whose dedication to the highest quality exhausts has made them one of the world's finest. With Akrapovic, you're getting the very best available for your car.   Akrapovic has developed several different 1M exhaust configurations to suit all tuning applications. The basis of all the configurations is their Titanium* Slip-On system. Utilizing a single muffler arrangement, the Slip-On is designed to be modular. In its basic mode, all exhaust gases flow through the main body of the muffler, giving you a deeper rumble of an exhaust note compared to stock without any drone. In Europe this system meets TÜV standards for noise. However, the muffler system is built in such a way that by replacing a blocking plate with our Wireless Kit valve system the driver is able to noticeably increase the volume of the exhaust at the press of a button. Once activated, the majority of the exhaust gases route through the muffler bypass outlets.     One of the most important aspects of driving a high performance European sports car is the way it sounds. At Akrapovic countless hours are spent making sure the systems they produce have unmatched acoustics. Simply making the exhaust louder than stock is not the answer. Designing a system that delivers a deep, rich growl at cruising speeds while also allowing the driver to enjoy an aggressive roar when driven hard is our goal. All of this is done without introducing any droning or harshness that could ruin the driving experience. In short, Akrapovic makes sure the car sounds the way it was always meant to.     All 1M systems are available with either titanium or carbon fiber tail pipes. Both versions feature a spherical mounting system to allow for perfect alignment of all four tips. The carbon fiber tips are constructed at our in-house production facility using "prepreg" cloth that is vacuum-bagged and autoclaved. The result is an attractive yet extremely durable part.   Also available are optional, improved, Stainless Steel downpipes which help open up the exhaust for even greater air flow and higher performance numbers. Akrapovic offers a complete exhaust valve control switch for this system as well that allows the driver to take complete control over the bi-modal exhaust valves, regardless of their RPMs. Please select your exhaust options from the drop-down menus below.     This system is still finishing production and will be officially available in Early October of 2011. The first production run is limited, so the sooner you order the more guaranteed you are to receive one of the first systems produced. We here at Southern Car Parts are proud to be among the first in line to receive these brand new, 1M Akrapovic exhaust systems. We are taking pre orders now for this amazing exhaust for the new 1M.

Akrapovic Titanium Evolution Exhaust System for the 2005+ E63 and E64 BMW M6 Engineers developed a complete aftermarket exhaust system for the M6. The connection tubes of the Evolution System, i.e. the complete ex manifold system, are newly designed in order to optimize the exhaust flow by offering a bigger tube diameter, interference crossover tubes to improve the vibration characteristics of the exhaust, and the discard of the second set of catalysts. The end mufflers are now split. This technique reduces the weight by 57 pounds in comparison to the 95 pound stock system. With an Akrapovic exhaust system you can rest assured that you're getting the absolute best available exhaust for your vehicle. For years, Akrapovic has made a name for themselves with professional motorcycle and automobile racing configurations, and they bring this race knowledge to the design and production of their other exhaust systems. The Akrapovic exhaust for the BMW M3 provides the vehicle with an unrivaled improvement in exhaust tonal quality that crescendoes beautifully up through the entire RPM range, and the large titanium exhaust tips give the vehicle a more pronounced and aggressive look that is sure to help the vehicle turn even more heads than it already does. In addition to these incredible tonal and appearance benefits, the Akrapovic exhaust will provide your BMW M3 with incredible performance gains through the entire RPM range. With all of these incredible benefits packaged together in a single exhaust system, you can be absolutely certain that you're getting your money's worth when you purchase an Akrapovic exhaust system. Akrapovic systems are only the best exhaust systems available on the market, and are made for only the best cars--a match made in automotive heaven. The stock torque curve of the M6 V-10-cylinder has a dent in the area of 5.000 rpm. Akrapovic exhaust has the cure as the maximum torque increase of 13 ft/lbs (at 5.970 rpm) is exactly within that area. The increase of power by 14 HP nearly homogeneously tunes in at around 4.000 rpm. This can be felt considerably and the 1.800 kg heavy vehicle appears more dynamic. The deconvolution of sound played a key role in the development of the exhaust system. We were able to change the sound characteristics of the high speed concept engine, based on the V-10-cylinder F1 motor, so that the advantages of the race genes manifest considerably without appearing invasive in daily use. Evolution complete system: titanium crossover tubes titanium end mufflers 4 titanium tail pipes Hard facts: plus 14 HP (at 6.360 rpm) plus 13 ft/lbs (at 5.970 rpm) minus 57 pounds

Akrapovic Titanium Slip-On Exhaust System for the 2007+ E90, E92, and E93 BMW M3 The Akrapovic aftermarket Slip-On exhaust system for BMW M3 consists of completely newly developed and split-end mufflers. This exhaust system, made fully from titanium, reduces the overall weight when compared to the stock system by about 30 pounds. With an Akrapovic exhaust system you can rest assured that you're getting the absolute best available exhaust for your vehicle. For years, Akrapovic has made a name for themselves with professional motorcycle and automobile racing configurations, and they bring this race knowledge to the design and production of their other exhaust systems. The Akrapovic exhaust for the BMW M3 provides the vehicle with an unrivaled improvement in exhaust tonal quality that crescendoes beautifully up through the entire RPM range, and the large titanium exhaust tips give the vehicle a more pronounced and aggressive look that is sure to help the vehicle turn even more heads than it already does. In addition to these incredible tonal and appearance benefits, the Akrapovic exhaust will provide your BMW M3 with incredible performance gains through the entire RPM range. With all of these incredible benefits packaged together in a single exhaust system, you can be absolutely certain that you're getting your money's worth when you purchase an Akrapovic exhaust system. Akrapovic systems are only the best exhaust systems available on the market, and are made for only the best cars--a match made in automotive heaven.       The power increase is about 3 HP. The torque is nearly constant at 3 ft/lbs over the stock. That is the real joy of driving: high speed engine benefits in daily practice due to the torque increase. It improves the agility in the lower rpm-range. Also, the engine is stronger in the higher rpm-range and the elasticity is improved. The improvement of acoustics played an important role in the development. The Akrapovic exhaust system amplifies and rectifies the beautiful sound of the 8-cylinder motor, without appearing invasive or having disadvantages in the daily use. Slip-On system, homologated: titanium end mufflers 4 titanium tail pipes Hard facts: plus 3 HP (at 7.610 rpm) plus 3 ft/lbs (at 5.930 rpm) minus 30 pounds

So you have spent over $1,000 upgrading your exhaust on your new car and it sounds great and you could not be happier. Until you walk behind your car and see your once shiny exhaust tips covered in soot and road grime. So you wipe them off and a week later they look just as bad as they did before. So this time you throw some wax on them, but that caused them to yellow and trap more dirt. You need a special polish for your exhaust tips that not only cleans the dirt off but seals them so they stay looking great. Our premium stainless steel polishing kit does just that. Our kit includes 2 large professional grade buffing compound sticks to bring back the shine on even the worse looking exhaust tips. A 4" buffing wheel to make cleaning your exhaust tips quick and easy. 2 special cloths for cleaning your exhaust tips at home and one to take along to shows to get your car ready for judging. And unlike other polishing kits, we also include a bottle of Simichrome Polish. Simichrome Polish puts a show winning shine on your exhaust tips and seals them so that they do not get stained like they used to anymore. We also include a set of photo detailed instructions to make cleaning your exhaust tips quick and easy. Our basic kit includes:  4” High-Quality Mushroom Buff w/ drill adapter 2 Special buffing compounds designed to take stainless steel to the next level A supply of Simichrome polish, the best polish hands down (cost $13 alone) 2 Special maintenance cloths (one for your garage and one to keep in the hatch compartment) Detailed Photo Instructions Our Super Deluxe kits include: Everything in the Standard Kit, plus The New 2" Taper Buff w/drill Adapter (to power buff the outside)  Don't think that this kit is only good for polishing exhaust tips.This kit will also allow you to polish any uncoated metal and even dull plastics. So now you can clean and maintain the stainless and chrome trim on your classic cars and the plastic trim on your daily driver as well. Our kit includes enough polishing compound to last for years.   

Akrapovic Titanium Evolution Exhaust System for the 2007+ E90, E91, and E92 BMW 335i Our engineers developed a complete aftermarket exhaust system which pushes this powerful Bavarian ahead of the pack. The next stage in revolutionizing the performance of the BMW 335i, past the Slip-On option is the great Evolution exhaust system is a must have for all drivers of this civilian rocket from Munich. This system, which is made entirely of titanium or stainless steel, gives the BMW 335i more power and weighs less that offers an even better on-road performance. The BMW 335i stock exhaust system weighs more than twice as much as the titanium Evolution, which speaks of the great achievement of our engineers. With an Akrapovic exhaust system you can rest assured that you're getting the absolute best available exhaust for your vehicle. For years, Akrapovic has made a name for themselves with professional motorcycle and automobile racing configurations, and they bring this race knowledge to the design and production of their other exhaust systems. The Akrapovic exhaust for the 335i provides the vehicle with an unrivaled improvement in exhaust tonal quality that crescendoes beautifully up through the entire RPM range, and the large titanium exhaust tips give the vehicle a more pronounced and aggressive look that is sure to help the vehicle turn even more heads than it already does. In addition to these incredible tonal and appearance benefits, the Akrapovic exhaust will provide your BMW 335i with incredible performance gains through the entire RPM range. With all of these incredible benefits packaged together in a single exhaust system, you can be absolutely certain that you're getting your money's worth when you purchase an Akrapovic exhaust system. Akrapovic systems are only the best exhaust systems available on the market, and are made for only the best cars--a match made in automotive heaven.   Measurements of the Evolution exhaust system on the BMW 335i show we made no compromises. That can be seen in additional power of 12 HP (at 5.980 rpm) and 12 ft/lbs of torque (at 2.910 rpm). But it is not all about providing more peak power. One can also observe noticeable refinements to the whole rpm range from 2.500 rpm to over 6.500 rpm. From 2.000 rpm to 3.000 rpm, the power is delivered homogeneously. Reducing backpressure causes improvement of throttle response and turbine response. The Akrapovic Titanium Evolution weighs only 30 pounds. Made entirely of titanium or stainless steel, the Evolution exhaust system sounds very sporty and reflects the formidable nature of the powerful six-pot engine. Evolution system: titanium or stainless steel crossover tubes titanium or stainless steel end muffler 2 titanium tail pipes Hard facts: plus 12 HP (at 5.980 rpm) plus 12 ft/lbs (at 2.910 rpm) minus 44 pounds

Akrapovic - the very best in world class performance exhaust systems. The 2014-2017 BMW M4 F82 F83 Akrapovic Evo will produce over 10HP and nearly 11LB torque versus a factory BMW system. But perhaps the biggest benefit is the reduction in weight, by installing this Titanium system you'll drop over 9 pounds! Nothing sounds better than the exhaust tone of an Akrapovic The Evolution link pipe set upgrades the Slip-On system to the Evolution system, which consists of a single-central muffler with valves and bigger Evolution link pipe tubes with a middle muffler, all designed to make the performance and workmanship of the complete system as perfect as it looks. With no second set of cats (unlike the stock system), the whole system is designed to give the smoothest flow—and the power and torque gains of the BMW with the combination of the Slip-On Line system and Evolution link pipe set are absolutely guaranteed. Crafted entirely from titanium, the complete system has a unique sound to complement its substantial increase over a very wide rpm range. In-depth engineering has produced a sound distinctly different from the stock system, giving a deep and sporty sound with no unwanted overtones or drone, and also a significant change to the sound with the valves in the open or closed positions. The complete system needs no re-programming of the ECU because it doesn’t trigger any warning lights. With tailpipes in titanium or carbon, and a handcrafted rear diffuser, all available as optional extras, the BMW with the Slip-On Line and Evolution link pipe set is as beautiful as it is powerful. A pioneer in its field, Akrapovič is widely recognized as a highly innovative materials technology company. The brand is synonymous with the highest level of design, performance enhancement and the creation of an unmistakable deeply resonant exhaust sound. The company’s products are designed and manufactured for motorcycles and performance cars by a passionate and highly-skilled workforce of over 1000 employees using the latest technology, processes and finest materials. The Racing R&D department works with dozens of racing teams. Over 100 world champions have already relied on Akrapovič exhaust systems. And this is just the beginning of a long exciting ride.

The Akrapovic Evolution exhaust system for the BMW 335i is the result of the perfect integration of expertise, the best technology, and the use of the finest materials. Made of austenitic stainless steel, the BMW 335i (F30) system feature a newly developed layout with two central link pipes replacing the single stock pipe, a new muffler design, and carbon fiber tailpipes. The sporty elegance of the Akrapovic BMW 335i exhaust makes the BMW 335i stand out from the rest and offers dual mode sounds accentuated with beautiful carbon fiber exhaust tips. You can expect to see a 5-7 hp increase with the Akrapovic 335i exhaust. The dual-mode ECU-controlled valve exhaust from Akrapovic offers stock level sound at normal cruising, and an exotic deep sporty note when driving the 335i more aggressivley. The Akrapovic BMW 335i Evolution system replace the stock exhaust from the catalytic converters back. Stock emission controls are not modified and catalytic converters stay in their original OEM configuration.   TECHNICAL DATA UNIT STOCK AKRAPOVIC MAX. GAIN maximum power kW 222.9 at 6000 rpm 227.6 at 6100 rpm + 5.2 at 5850 rpm HP (m) 303.1 at 6000 rpm 309.4 at 6100 rpm + 7.1 at 5850 rpm HP (i) 299 at 6000 rpm 305.2 at 6100 rpm + 7 at 5850 rpm maximum torque Nm 426.9 at 2650 rpm 433.5 at 3500 rpm + 10.7 at 3500 rpm lb-ft 314.9 at 2650 rpm 319.7 at 3500 rpm + 7.9 at 3500 rpm weight kg 21.2 20.4 - 0.8 lb 46.7 45 - 1.8

Akrapovic Titanium Slip-On Exhaust System for the 2007+ E90, E91, and E92 BMW 335i The BMW 335i with the twin-turbo engine is a true factory-made beast, but our engineers developed a special aftermarket titanium and stainless steel exhaust system for it, which makes the 335i even better. The Slip-On is designed for drivers who demand more power and less weight. In addition to a weight reduction and a power gain, one of the tasks of the Akrapovic team was also to make the sound of the 335i become music to ones ears. Additionally, the two titanium tail pipes are an important part of the Akrapovic exhaust system and a must-show. With an Akrapovic exhaust system you can rest assured that you're getting the absolute best available exhaust for your vehicle. For years, Akrapovic has made a name for themselves with professional motorcycle and automobile racing configurations, and they bring this race knowledge to the design and production of their other exhaust systems. The Akrapovic exhaust for the 335i provides the vehicle with an unrivaled improvement in exhaust tonal quality that crescendoes beautifully up through the entire RPM range, and the large titanium exhaust tips give the vehicle a more pronounced and aggressive look that is sure to help the vehicle turn even more heads than it already does. In addition to these incredible tonal and appearance benefits, the Akrapovic exhaust will provide your BMW 335i with incredible performance gains through the entire RPM range. With all of these incredible benefits packaged together in a single exhaust system, you can be absolutely certain that you're getting your money's worth when you purchase an Akrapovic exhaust system. Akrapovic systems are only the best exhaust systems available on the market, and are made for only the best cars--a match made in automotive heaven.   We successfully improved the stock exhaust system (with a Slip-On system) of the BMW 335i in numerous areas. The first visible improvement is the additional power of 7 HP (at 5,950 rpm) and 6 ft/lbs torque (at 3560 rpm). The range between 2500 rpm and 3000 rpm and at 3500 rpm was particularly improved. A noticeable step forward can also be observed at highest power (looking revs) where the Slip-On gives more power. When we are trying to achieve better performance, weight also plays a big role. The Akrapovic Slip-On exhaust system for the BMW 335i is more than 17 pounds lighter when compared with a stock exhaust, which offers an even better power to weight ratio. The Akrapovic Slip-On exhaust system is homologated for street use. This beautiful piece of titanium art also gives the powerful BMW 6-cylinder engine a more sporty sound. Slip-On system, homologated: titanium or stainless steel end muffler 2 titanium tail pipes Hard facts: plus 7 HP (at 5.950 rpm) plus 6 ft/lbs torque (at 3.560 rpm) minus 17+ pounds

Akrapovic Titanium Evolution Exhaust System for the F10 BMW TwinPower Turbo M5 The BMW M cars are some of the most impressive road cars ever created. The engineering masterpiece in the form of the new M TwinPower Turbo M5 has been a welcome challenge to the Akrapovic R&D department, which is responsible for developing a truly amazing complete titanium exhaust system that offers more power, weighs less, and has an EC approval stamp at the same time. Compared to the previous generation, the BMW top sedan has lost two cylinders and has gained turbocharging. This doesn’t mean the M5 has lost its pure driving excellence—just the opposite. Add a full titanium Akrapovic Evolution exhaust system and you'll never stop driving. The new Evolution exhaust system consists of newly developed dual-outlet mufflers with exhaust valves, flow-optimized pipes, and a unique cast titanium X-shaped piping section with resonators. The X-pipe, valves, and flange assembly are produced in our foundry. To top off this work of art, we’ve got your choice of either polished titanium and aerospace-grade carbon fiber tail pipes available to choose from. It's an exhaust system so beautiful you'll want to hang it above your fireplace mantel. The Evolution system lowers the back pressure and gives the M5 more power and torque through the whole range of rpms. It increases responsiveness. The Evolution system offers an even greater difference in weight, improving the power-to-weight ratio. Gains are achieved without removing the catalytic converters. While developing this system, Akrapovic especially focused on sound. An M5 with the Evolution system delivers a deep, aggressive roar when driven hard, coaxing bangs out of the unique tail pipes when shifting and going off the throttle. To top it all off, the Evolution system is drone free and works well with the M5's Active Noise Cancellation system—just like the valve system, which is regulated through the M5’s settings.   Evolution system: link pipes (titanium), including custom made x-pipe and resonators 2 titanium end mufflers Choice of titanium and carbon fiber quad exhaust tips Hard facts: plus 10 HP (at 5950 rpm) plus 13 ft/lbs torque (at 5200 rpm) minus 27+ pounds

Akrapovic Titanium Evolution Exhaust System for the E70 BMW X5M and E71 BMW X6M A twin turbo, 4.4 liter, 555 horsepower SUV? Only from the M division of BMW could a beast such as this be set loose on the world. Akrapovic is proud to have designed an exhaust system that unleashes the typical V8 roar from the engine of this technically advanced and premium BMW. We have constructed a complete "catalyst back" exhaust system manufactured entirely from our proprietary titanium alloy, which introduces enhancements to the exhaust design not found in the stock system. One of the most important changes is the incorporation of an X-pipe in the system. The inclusion of an X-pipe increases low to mid-range power while at the same time producing a deeper exhaust note that the original system lacks. Additionally, a pair of resonators are added to eliminate any chance of in-cabin droning. The mounting flanges are made of cast titanium from our in-house foundry and ensure a perfect, leak-free fit. Moving to the muffler section of our system, we have retained the dualmode exhaust flap control from the original system. This allows the vehicle to have a more civilized, but deeper than stock sound at low speed. However, at higher RPM (or when selecting the "S" mode on the gearshift) the muffler is bypassed, creating a deep and sporty sound much more in keeping with the personality of the car. Two exhaust tail pipe options are available; both are 100 mm in diameter. The first is made completely from titanium while the other is crafted from a carbon fiber/titanium composite. The carbon fiber version was developed on the BMW X6 M MotoGP Safety Car, which is driven at sustained high speed, to guarantee uncompromised durability. Performance has not been left out of the design. The system dramatically reduces backpressure and is an excellent starting point for further engine tuning or turbo modifications. Even when installed on an otherwise stock vehicle a gain of 11 horsepower and 15 Nm / 11 lbs-ft of torque are achieved. Furthermore, a weight reduction of 23 kg / 50 lbs. is realized. The OEM catalysts are retained, so no reflashing of the ECU is required and the check engine light will not be triggered. Evolution system (EC Type approval): Titanium link pipe set with resonators Titanium X-pipe Titanium muffler with integrated exhaust valves Hard facts: Plus 11 HP (at 6,200 rpm) Plus 15 Nm / 11 lbs-ft of torque (at 2,270 rpm) 23 kg / 50 lbs. lighter than stock Tail pipes: 4 titanium tail pipes 4 carbon fiber tail pipes Please select your tail pipe style from the drop-down menu: Sound Clips Video Clips Installation Instructions

Akrapovic Titanium Slip-On Exhaust System for the 2005+ E63 and E64 BMW M6 Akrapovic engineers developed a Slip-On aftermarket exhaust system for the BMW M6. The tubes are newly designed in order to optimize the exhaust flow by offering a bigger tube diameter. The end mufflers are now split. This technique reduces the weight by 28 pounds in comparison to the stock system. With an Akrapovic exhaust system you can rest assured that you're getting the absolute best available exhaust for your vehicle. For years, Akrapovic has made a name for themselves with professional motorcycle and automobile racing configurations, and they bring this race knowledge to the design and production of their other exhaust systems. The Akrapovic exhaust for the BMW M6 provides the vehicle with an unrivaled improvement in exhaust tonal quality that crescendoes beautifully up through the entire RPM range, and the large titanium exhaust tips give the vehicle a more pronounced and aggressive look that is sure to help the vehicle turn even more heads than it already does. In addition to these incredible tonal and appearance benefits, the Akrapovic exhaust will provide your BMW M6 with incredible performance gains through the entire RPM range. With all of these incredible benefits packaged together in a single exhaust system, you can be absolutely certain that you're getting your money's worth when you purchase an Akrapovic exhaust system. Akrapovic systems are only the best exhaust systems available on the market, and are made for only the best cars--a match made in automotive heaven. The stock torque curve of the M6 V-10-cylinder has a dent in the area of 5.000 rpm. Akrapovic exhaust has the maximum torque increase of 4 ft/lbs (at 7.210 rpm). The increase of power by 4 HP nearly homogeneously tunes in at around 7.000 rpm. This can be felt considerably and the 4,00 pound heavy vehicle appears more dynamic. The deconvolution of sound played a key role in the development of the exhaust system. We were able to change the sound characteristics of the high speed concept engine, based on the V-10-cylinder F1 motor, so that the advantages of the race genes manifest considerably without appearing invasive in daily use. Slip-On system, homologated: titanium end mufflers 4 titanium tail pipes Hard facts: plus 4 HP (at 7.200 rpm) plus 4 ft/lbs (at 7.210 rpm) minus over 28 pounds Akrapovic Part Number: MTP-BME63/4M6H

Akrapovic Stainless Steel Slip-On Exhaust System for the 2007+ E90, E91, and E92 BMW 335i The BMW 335i with the twin-turbo engine is a true factory-made beast, but our engineers developed a special aftermarket titanium and stainless steel exhaust system for it, which makes the 335i even better. The Slip-On is designed for drivers who demand more power and less weight. In addition to a weight reduction and a power gain, one of the tasks of the Akrapovic team was also to make the sound of the 335i become music to ones ears. Additionally, the two titanium tail pipes are an important part of the Akrapovic exhaust system and a must-show. With an Akrapovic exhaust system you can rest assured that you're getting the absolute best available exhaust for your vehicle. For years, Akrapovic has made a name for themselves with professional motorcycle and automobile racing configurations, and they bring this race knowledge to the design and production of their other exhaust systems. The Akrapovic exhaust for the 335i provides the vehicle with an unrivaled improvement in exhaust tonal quality that crescendoes beautifully up through the entire RPM range, and the large titanium exhaust tips give the vehicle a more pronounced and aggressive look that is sure to help the vehicle turn even more heads than it already does. In addition to these incredible tonal and appearance benefits, the Akrapovic exhaust will provide your BMW 335i with incredible performance gains through the entire RPM range. With all of these incredible benefits packaged together in a single exhaust system, you can be absolutely certain that you're getting your money's worth when you purchase an Akrapovic exhaust system. Akrapovic systems are only the best exhaust systems available on the market, and are made for only the best cars--a match made in automotive heaven.   We successfully improved the stock exhaust system (with a Slip-On system) of the BMW 335i in numerous areas. The first visible improvement is the additional power of 7 HP (at 5,950 rpm) and 6 ft/lbs torque (at 3560 rpm). The range between 2500 rpm and 3000 rpm and at 3500 rpm was particularly improved. A noticeable step forward can also be observed at highest power (looking revs) where the Slip-On gives more power. When we are trying to achieve better performance, weight also plays a big role. The Akrapovic Slip-On exhaust system is homologated for street use. This beautiful piece of titanium art also gives the powerful BMW 6-cylinder engine a more sporty sound. Slip-On system, homologated: titanium or stainless steel end muffler 2 titanium tail pipes Hard facts: plus 7 HP (at 5.950 rpm) plus 6 ft/lbs torque (at 3.560 rpm)