Corvette C6 Big Brake Kits


Corvette C6 Big Brake Kits

Corvette C6 Big Brake Kits

We take pride in associating ourselves with only the finest performance modification manufacturers here at SouthernCarParts, and that's why you'll see only the finest manufacturers in our catalog. Whether it is Baer Corvette Brakes, DBA Corvette Brake Rotors, Hawk Corvette Brake Pads, Wilwood Corvette Big Brake Kits, Brembo Corvette Big Brake Kits, or any other product in our Corvette Brake Catalog you can rest assured that the product you're ordering is of the highest quality. Of course, quality isn't everything, and we also pride ourselves on offering the internet's best pricing. Take an extensive look at our entire Corvette Brakes Catalog and please feel free to call us with any questions you may have concerning our full line-up of Corvette Brake Rotors, Corvette Big Brake Kits, Corvette Brake Pads, and other C6 Corvette Brake Components.

12 Item(s)

Grid List

Set Descending Direction
  • C6 Corvette Wilwood Rear Big Brake Kit

    C6 Corvette Wilwood Rear Big Brake Kit

    $2,099.00
    Free Shipping
    Superlite 4R C6 Corvette Big Brake Rear Brake Kit For OE Parking Brake Pistons: 4 Rotor Diameter:14 Caliper Mount: Radial Min. Wheel Diameter: 18  Compatible with  Chevrolet C6 Corvette 2010-2011 Chevrolet C6 Corvette C-5 1997-2004 All C-5 & ZO6 Rear Disc Chevrolet C6 Corvette C-6 2005-2010 All Rear Disc   The C6 Corvette engineers were developing more horsepower out of the new LS engines in 2005, so they wanted to build the ultimate C6 Corvette. The Previous generation C6 Corvette grew in size and weight, so they wanted to make the new C6 Corvette smaller and lighter. The body was redesigned with exposed headlights to remove the weight involved in building a hideaway headlight system. Engine power was also increased to 400 horsepower, the same as the previous years Z06. The new Z06 horsepower was increased to 505 and the ZR1 C6 Corvette would have over 600 horsepower. Obviously, all of the new C6 Corvettes are performers so Wilwood offers several brake improvement kits. If you track your C6 Corvette, Wilwood offers a W6A Big Brake Front Brake Kit (Race) and a matching rear kit. This system can withstand the rigors of heavy track action. Increased braking for the street and track can be obtained with the Superlite 6R Big Brake Front Brake Kit with 13.06 or 14-inch rotors. Matching rear brakes with Superlite 4R calipers are also available. Wilwood also offers high-performance brake pads for the original C6 Corvette calipers and they provide a substantial brake improvement.  Billet Superlite 4R four piston calipers are combined with BP-10 compound pads and 13”-14” rotors in this group of big brake kits for custom high-performance street and show machines. This group of specialized kits for cars, trucks, and SUV’s retain full use of the OE parking brake, master cylinder output, and ABS where used. SL4R rear kits provide complimentary style and performance with 13” and larger front brake upgrades in conjunction with wheel, tire, and suspension upgrades. Optional caliper finishes and rotor designs enable the builder to match style and performance on all applications.  Calipers Billet Narrow Superlite 4 The Superlite caliper series has set the standard for many years in short track, late model, modified and open wheel competition. It has also enjoyed prominence in a variety of road-race, off-road, rally and sport driving applications. Starting at 4.40 pounds, the Forged Billet Superlite (FSL) is the newest innovation in this series from Wilwood. New and adaptive technologies have been applied providing substantial improvements in strength, fluid volume displacement, and overall performance. The Superlite caliper series has set the standard for many years in short track, late model, modified and open wheel competition. It has also enjoyed prominence in a variety of road-race, off-road, rally and sport driving applications. Starting at 4.40 pounds, the Forged Billet Superlite (FSL) is the newest innovation in this series from Wilwood. New and adaptive technologies have been applied providing substantial improvements in strength, fluid volume displacement, and overall performance. The FSL body design is a highly efficient product of computer generated solid modeling and stress analysis technology. Each caliper features closed end bridges with a radial transition to the piston body housings. The elimination of machined steps and sharp shoulders in this critical area provides a measurable increase in overall body strength and resistance to deflection under load. Center bridge bolts replace cotter pins to provide additional support and allow quick access to positive brake pad retention. Clamping force, structural deflection, and volume displacement tests have proven the superior strength and efficiency of the FSL. On-track testing has proven driver satisfaction. The bottom line is better stopping power with less pedal travel. The superior strength of this innovative new caliper is combined with proven performance features from other Wilwood designs. Each caliper is equipped with Wilwood's replaceable SRS stainless steel bridge plates. SRS plates eliminate the bridge wear caused by pad gouging and extend the service life of the caliper body. The spring-loading action of the SRS plates also eliminates pad rattle and dampens the vibration harmonics that contribute to squeal under braking. Other standard Wilwood features include high-temperature, square-faced o-ring seals for positive sealing, controlled piston retraction, and long service life in high heat conditions. Stainless steel pistons are used to resist corrosion and retard heat transfer from the pads. Fluid tubes are vibration dampened to resist stress fractures and reduce damage caused by track debris. Two-piece bleed screw assemblies provide long, reliable service life and are easily replaced if necessary. Forged Billet Superlite calipers are a direct replacement for all Wilwood Superlite and similar competitive brand calipers with 3.50" centered mounting tabs. Calipers are available in the popular 1.75", 1.62”, 1.38", 1.25” and 1.12” piston sizes for .81", 1.10" and 1.25" rotor widths. FSL calipers use the same 7420 type bridge bolt brake pad used in all Superlite 6 piston calipers. The full range of PolyMatrix pad compounds is available to match brake response and heat range to any application.    Rotors GT-72 curved vane rotors are built for the extreme conditions of professional motorsports. The superior heat absorption and dissipation characteristics of these heavy wall directional vane rotors are the keys to preventing heat fade and realizing long service life from the rotors and pads. All rotors are cast from premium grade, long grain carbon iron for long wear, thermal stability, and resistance to distortion. Every GT rotor is fully detail machined to eliminate stress points and unnecessary weight away from the pad sweep face. The faces and O.D. are precision turned to less than .001" for flatness, parallelism, and run-out. An asymmetrical face slot pattern provides smoother engagement through reduced harmonics and improved thermal balance between the I.D. and O.D. of the rotor. Every rotor is then individually dynamic balanced to provide vibration free performance at any speed. These rotors provide the highest cooling capacity and longest service life for extreme braking short tracks and road course competition.    Rotor HatsParking Brake Hat - Standard These premium grade cast iron hats are used with Wilwood's internal shoe parking brake kits. Each hat is a precision machined, threaded hole design for use in conjunction with through-hole mount rotors. After machining, the hats are electro-coated for corrosion resistance.Check clearance diagram below to ensure proper fitment with your wheel application. Note(s): 1. 14" Rotor 2. The kit will require aftermarket wheel spacers of 1/8th" (not included in kit) for rear kit installation with OE wheels. Application: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette, Z06 .
  • C6 Corvette Grand Sport Brembo GT Rear Brake Kit

    C6 Corvette Grand Sport Brembo GT Rear Brake Kit

    Regular Price: $3,295.00

    Special Price $3,195.00

    We all want massive HP and acceleration for our C6 Corvette. 0-60 and quarter mile times are a metric every C6 Corvette owner knows and wants to improve their car. But what about stopping, 60-0? The Stock Z06 brakes are awesome for the street and good on the track, but with moderate track use, the stock C6 Corvette Grand Sport brakes will start to suffer from fade, increased pedal travel, and get a spongy feel. Every other aspect of the car is track ready right off the showroom floor. If you are going to be taking your Grand Sport to the track, upgrading the brakes is a must. This is a complete Brembo GT Rear C6 Corvette Grand Sport GT Monobloc kit brake kit. Each Kit comes complete with Brembo calipers with anti-rattle clips High-performance street/autocross pads by Ferodo are preloaded in the calipers Discs are preassembled with a zinc plated, high carbon disc and an aluminum hat Floating McLaren hardware, originally designed for the road-going McLaren supercar, is used to secure the hat to the disc Brembo designed billet aluminum brackets and hardware Goodridge Stainless braided lines Complete installation instructions Please note, some applications may require wheel spacers depending upon wheel offset and clearance.  Rear SetupFour Piston Brembo GT Calipers (Black, Red, Yellow, or Silver)Rear 345x28 2-Piece (Choice of Drilled or Slotted) Brembo GT Kit Benefits The Brembo GT (Gran Turismo ) line is dedicated to the most demanding customers. This braking system originates from the Racing components, consisting of a ventilated, integral or composite disc, available drilled or slotted, 4, 6 and 8 piston aluminum calipers, a complete set of high-performance brake pads, metal braid tubes, and high-quality small parts.1. High-Performance Friction Material: Aggressive pads that provide thehighest level of performance.2. Cross-Drilled or Slotted Discs: Clears gasses, cleans pads for better“bite”.3. Mounting Brackets and Assembly Hardware: Aircraft quality includedand pre-torqued specifications.4. Stainless Steel Braided Brake Line: DOT/TÜV approved.5. “Floating” Disc Mounting System with Billet Aluminium Hat: Reduce “Unsprung Weight” for better handling and reduces heat-related stress; increases brake performance and pedal feel.6. Four, Six or Eight Piston Cast Aluminium Calipers: Provide maximum braking force without the flex of sliding calipers.Comparison between floating 2-piece and 1-piece discs The floating disc mounting system, due to the aluminum alloy hat, reduces the “unsprung” weight for better handling and reduces heat-related stress: the mounting system is designed to allow a specific amount of float in both radial and axial directions. Brembo has engineered special springs that are used on every other fastener in order to slightly preload the assembly. This has been done to prevent excessive noise from the system during street use. The one-piece discs (both for the Sport and GT lines) are specifically designed in the goose-neck area to minimize thermal distortion and thus disc warping under severe use conditions. The one-piece discs provide excellent stopping power ranging from everyday traffic conditions to more spirited high-performance driving and fit into the budget of any enthusiast. Free Domestic Ground Shipping Application: 2010, 2011, 2012, 2013 C6 Corvette Grand Sport
  • C6 Corvette Brembo GT Rear Brake Kit

    C6 Corvette Brembo GT Rear Brake Kit

    Regular Price: $3,295.00

    Special Price $3,100.00

    We all want massive HP and acceleration for our C6 Corvette Base Model and Z51. 0-60 and quarter mile times are a metric every C6 Corvette owner knows and wants to improve their car. But what about stopping, 60-0? The Stock C6 Corvette Z51 brakes are awesome for the street and good on the track, but with moderate track use, the stock C6 Corvette Coupe, Convertible, and Z51 brakes will start to suffer from fade, increased pedal travel, and get a spongy feel. Every other aspect of the car is track ready right off the showroom floor. If you are going to be taking your C6 Corvette to the track, upgrading the brakes is a must. This is a complete Brembo GT Rear C6 Corvette Base Model or Z51(non-Grand Sport, or Z06) GT Monobloc kit Brembo upgrade kit. Each Kit comes complete with  Brembo calipers with anti-rattle clips High-performance street/autocross pads by Ferodo are preloaded in the calipers Discs are preassembled with a zinc plated, high carbon disc and an aluminum hat Floating McLaren hardware, originally designed for the road-going McLaren supercar, is used to secure the hat to the disc Brembo designed billet aluminum brackets and hardware Goodridge Stainless braided lines Complete installation instructions Please note, some applications may require wheel spacers depending upon wheel offset and clearance. The Brembo GT package for the C6 Corvette base model and Z51 includes everything needed to complete the installation. Brembo Rear Setup Four Piston Brembo Calipers (Black, Red, Yellow, or Silver)345x28 2-Piece Rotors (Choice of Drilled or Slotted) Brembo GT Kit BenefitsThe Brembo GT (Gran Turismo ) line is dedicated to the most demanding customers. This brakingsystem originates from the Racing components, consisting of a ventilated, integral or composite disc, available drilled or slotted, 4, 6 and 8 piston aluminum calipers, a complete set of high-performancebrake pads, metal braid tubes, and high-quality small parts.1. High-Performance Friction Material: Aggressive pads that provide thehighest level of performance.2. Cross-Drilled or Slotted Discs: Clears gasses, cleans pads for better“bite”.3. Mounting Brackets and Assembly Hardware: Aircraft quality includedand pre-torqued specifications.4. Stainless Steel Braided Brake Line: DOT/TÜV approved.5. “Floating” Disc Mounting System with Billet Aluminium Hat: Reduce “Unsprung Weight” for better handling and reduces heat-related stress; increases brake performance and pedal feel.6. Four, Six or Eight Piston Cast Aluminium Calipers: Provide maximum braking force without the flex of sliding calipers.Comparison between floating 2-piece and 1-piece discs The floating disc mounting system, due to the aluminum alloy hat, reduces the “unsprung” weight for better handling and reduces heat-related stress: the mounting system is designed to allow a specific amount of float in both radial and axial directions. Brembo has engineered special springs that are used on every other fastener in order to slightly preload the assembly. This has been done to prevent excessive noise from the system during street use. The one-piece discs (both for the Sport and GT lines) are specifically designed in the goose-neck area to minimize thermal distortion and thus disc warping under severe use conditions. The one-piece discs provide excellent stopping power ranging from everyday traffic conditions to more spirited high-performance driving and fit into the budget of any enthusiast. Free Domestic Ground Shipping Application: 2005, 2006, 2007, 2008, 2010, 2011, 2012, 2013 C6 Corvette  
  • C6 Corvette  Z06 and GS GT-R Brembo Front Brake Kit

    C6 Corvette Z06 and GS GT-R Brembo Front Brake Kit

    $8,150.00
    Free Shipping
    รขโ‚ฌโ€นThe Brembo GT-R braking systems for the C6 Corvette Z06 are designed to meet the needs of aggressive braking whether on the road or the track, and that's a good thing as the ultra powerful LS7 engine line can get the C6 Z06 going very fast. Brembo C6 Corvette Z06 GT-R Big Brakes are the most advanced expression of all Brembo's experience in braking system design. The GT-R C6 Corvette Big Brake Kit is comprised of single block billet aluminium calipers with 4 and 6 piston radial attachment, two piece floating discs, pads with different friction material and high performance hardware.   Single block calipers in billet aluminium with racing characteristics:  lightweight, rigid and resistant to high temperatures The GT-R calipers are made from billet aluminium with radial 4 and 6 piston attachments. They reduce the non suspended weight, improving the dynamics and vehicle performance. They are designed to provide a constant locking strength and the sensation of a stable and reliable pedal. The pistons with stainless steel radiators allow a significant reduction of heat passage during extreme driving, reducing brake wear to a minimum. In order to guarantee protection against corrosion and to provide high quality in the field, the GT-R calipers are nickel plated and have the Brembo logo CNC machined in red embossing. The GT-R system has been designed for the driver who demands exceptional performance on the street and on the track. It includes 4 or 6-piston monobloc calipers, two-piece floating brake rotors, a selection of friction materials and all the necessary hardware to insure seamless installation. The GT-R calipers are machined entirely from billet like a $10,000 race caliper, not cast like our GT calipers. Billet calipers include the benefits of a full race brake system: more stiffness, lighter weight (GT-R calipers achieve a weight reduction up to 10 percent compared to casted versions) and more thermo-mechanical resistance. The nickel-plated finish provides additional treatment against corrosion and ensures a long lasting, attractive look. The pistons, complete with stainless steel inserts, provide an additional heat barrier virtually eliminating fade even during max-limit and on-track driving. Unique dual inner seals design keeps the seals away from excess heat. The inner seal acts as a pressure seal, with the outer seal acting as a wiper for long seal life in extreme conditions. The calipers provide less brake fluid absorption and a stiffer pedal feel delivering consistent clamping force suited for drivers wanting to make the most of every second.   Two piece floating discs to reduce the suspended weight and dissipate heat quickly GT-R braking systems include two piece floating discs which reduce the suspended weight and dissipate heat quickly. The floating disc's anti-noise hardware is the direct result of Brembo's experience with brakes designed for Formula 1 competition.     Pads provide optimum performance in various driving conditionsThe GT-R range offers a series of friction material which is able to meet a wide range of driving types. It offer optimum performance in various driving conditions, both on and off the track. In addition to the High Performance road pads, pads with racing/track friction material are also available. In order to guarantee correct installation without problems, the GT-R kit includes all the necessary hardware elements such as billet brackets and installation adaptors as well as stainless steel Goodridge brake pipes.   ->Not all rotors sizes fit behind OEM wheels. Make sure you know what size wheels you will be using before choosing your rotor size. As a "general" rule, the rotor size should be no more than 4" below what your wheel size is. For example, 19" Wheels, rotor size should not be bigger than 15" or 380mm.
  • C6 Corvette Z06 Brembo GT Rear Brake Kit

    C6 Corvette Z06 Brembo GT Rear Brake Kit

    Regular Price: $3,295.00

    Special Price $3,195.00

    Free Shipping
    We all want massive HP and acceleration for our C6 Corvette. 0-60 and quarter mile times are a metric every C6 Corvette owner knows and wants to improve their car. But what about stopping, 60-0? The Stock Z06 brakes are awesome for the street and good on the track, but with moderate track use, the stock C6 Corvette Z06 brakes will start to suffer from fade, increased pedal travel, and get a spongy feel. Every other aspect of the car is track ready right off the showroom floor. If you are going to be taking your Z06 to the track, upgrading the brakes is a must. This is a complete Brembo GT Rear C6 Corvette Z06 GT Monobloc kit brake kit. Each Kit comes complete with Brembo calipers with anti-rattle clips High-performance street/autocross pads by Ferodo are preloaded in the calipers Discs are preassembled with a zinc plated, high carbon disc and an aluminum hat Floating McLaren hardware, originally designed for the road-going McLaren supercar, is used to secure the hat to the disc Brembo designed billet aluminum brackets and hardware Goodridge Stainless braided lines Complete installation instructions Please note, some applications may require wheel spacers depending upon wheel offset and clearance.  Rear SetupFour Piston Brembo GT Calipers (Black, Red, Yellow, or Silver)Rear 345x28 2-Piece (Choice of Drilled or Slotted) Brembo GT Kit Benefits The Brembo GT (Gran Turismo ) line is dedicated to the most demanding customers. This braking system originates from the Racing components, consisting of a ventilated, integral or composite disc, available drilled or slotted, 4, 6 and 8 piston aluminum calipers, a complete set of high-performance brake pads, metal braid tubes and high-quality small parts.1. High-Performance Friction Material: Aggressive pads that provide thehighest level of performance.2. Cross-Drilled or Slotted Discs: Clears gasses, cleans pads for better“bite”.3. Mounting Brackets and Assembly Hardware: Aircraft quality includedand pre-torqued specifications.4. Stainless Steel Braided Brake Line: DOT/TÜV approved.5. “Floating” Disc Mounting System with Billet Aluminium Hat: Reduce “Unsprung Weight” for better handling and reduces heat-related stress; increases brake performance and pedal feel.6. Four, Six or Eight Piston Cast Aluminium Calipers: Provide maximum braking force without the flex of sliding calipers.Comparison between floating 2-piece and 1-piece discs The floating disc mounting system, due to the aluminum alloy hat, reduces the “unsprung” weight for better handling and reduces heat-related stress: the mounting system is designed to allow a specific amount of float in both radial and axial directions. Brembo has engineered special springs that are used on every other fastener in order to slightly preload the assembly. This has been done to prevent excessive noise from the system during street use. The one-piece discs (both for the Sport and GT lines) are specifically designed in the goose-neck area to minimize thermal distortion and thus disc warping under severe use conditions. The one-piece discs provide excellent stopping power ranging from everyday traffic conditions to more spirited high-performance driving and fit into the budget of any enthusiast. Free Domestic Ground Shipping Application: 2006, 2007, 2008, 2010, 2011, 2012, 2013 C6 Corvette Z06
  • C6 Corvette  GT-R Brembo Front Brake Kit

    C6 Corvette GT-R Brembo Front Brake Kit

    $7,860.00
    Free Shipping
    Fits all Base C6 Corvettes, including those with the Z51 Brake Package รขโ‚ฌโ€นThe Brembo GT-R braking systems for the C6 Corvette are designed to meet the needs of aggressive braking whether on the road or the track, and that's a good thing as the ultra powerful LS engine line can get the C6 Corvette going very fast. Brembo C6 Corvette GT-R Big Brakes are the most advanced expression of all Brembo's experience in braking system design. The GT-R C6 Corvette Big Brake Kit is comprised of single block billet aluminium calipers with 4 and 6 piston radial attachment, two piece floating discs, pads with different friction material and high performance hardware.   Single block calipers in billet aluminium with racing characteristics:  lightweight, rigid and resistant to high temperatures The GT-R calipers are made from billet aluminium with radial 4 and 6 piston attachments. They reduce the non suspended weight, improving the dynamics and vehicle performance. They are designed to provide a constant locking strength and the sensation of a stable and reliable pedal. The pistons with stainless steel radiators allow a significant reduction of heat passage during extreme driving, reducing brake wear to a minimum. In order to guarantee protection against corrosion and to provide high quality in the field, the GT-R calipers are nickel plated and have the Brembo logo CNC machined in red embossing. The GT-R system has been designed for the driver who demands exceptional performance on the street and on the track. It includes 4 or 6-piston monobloc calipers, two-piece floating brake rotors, a selection of friction materials and all the necessary hardware to insure seamless installation. The GT-R calipers are machined entirely from billet like a $10,000 race caliper, not cast like our GT calipers. Billet calipers include the benefits of a full race brake system: more stiffness, lighter weight (GT-R calipers achieve a weight reduction up to 10 percent compared to casted versions) and more thermo-mechanical resistance. The nickel-plated finish provides additional treatment against corrosion and ensures a long lasting, attractive look. The pistons, complete with stainless steel inserts, provide an additional heat barrier virtually eliminating fade even during max-limit and on-track driving. Unique dual inner seals design keeps the seals away from excess heat. The inner seal acts as a pressure seal, with the outer seal acting as a wiper for long seal life in extreme conditions. The calipers provide less brake fluid absorption and a stiffer pedal feel delivering consistent clamping force suited for drivers wanting to make the most of every second.   Two piece floating discs to reduce the suspended weight and dissipate heat quickly GT-R braking systems include two piece floating discs which reduce the suspended weight and dissipate heat quickly. The floating disc's anti-noise hardware is the direct result of Brembo's experience with brakes designed for Formula 1 competition.     Pads provide optimum performance in various driving conditionsThe GT-R range offers a series of friction material which is able to meet a wide range of driving types. It offer optimum performance in various driving conditions, both on and off the track. In addition to the High Performance road pads, pads with racing/track friction material are also available. In order to guarantee correct installation without problems, the GT-R kit includes all the necessary hardware elements such as billet brackets and installation adaptors as well as stainless steel Goodridge brake pipes.   ->Not all rotors sizes fit behind OEM wheels. Make sure you know what size wheels you will be using before choosing your rotor size. As a "general" rule, the rotor size should be no more than 4" below what your wheel size is. For example, 19" Wheels, rotor size should not be bigger than 15" or 380mm.
  • C6 Corvette Wilwood Front Big Brake Kit

    C6 Corvette Wilwood Front Big Brake Kit

    Regular Price: $2,399.00

    Special Price $2,200.00

    Free Shipping
    W6A Wilwood Big Brake Front Brake Kit Pistons: 6 Rotor Diameter:14.25 Caliper Mount: Radial Min. Wheel Diameter: 18Compatible with the  Chevrolet Chevrolet C6 Corvette 2010-2011 Cadilac XLR 2005-2009 All Chevrolet Chevrolet C6 Corvette C-5 1997-2004 All C-5 & ZO6 Chevrolet Chevrolet C6 Corvette C-6 2005-2009 All C-6 & ZO6  The C6 Corvette engineers were developing more horsepower out of the new LS engines in 2005, so they wanted to build the ultimate C6 Corvette. The Previous generation C6 Corvette grew in size and weight, so they wanted to make the new C6 Corvette smaller and lighter. The body was redesigned with exposed headlights to remove the weight involved in building a hideaway headlight system. Engine power was also increased to 400 horsepower, the same as the previous years Z06. The new Z06 horsepower was increased to 505 and the ZR1 C6 Corvette would have over 600 horsepower. Obviously, all of the new C6 Corvettes are performers so Wilwood offers several brake improvement kits. If you track your C6 Corvette, Wilwood offers a W6A Big Brake Front Brake Kit (Race) and a matching rear kit. This system can withstand the rigors of heavy track action. Increased braking for the street and track can be obtained with the Superlite 6R Big Brake Front Brake Kit with 13.06 or 14-inch rotors. Matching rear brakes with Superlite 4R calipers are also available. Wilwood also offers high-performance brake pads for the original C6 Corvette calipers and they provide a substantial brake improvement. Wilwood W6AR calipers were designed for the specific purpose of providing big capacity braking with large diameter rotors for heavy weight and extreme duty vehicles. For cars, it’s the biggest of the big providing big brake performance for show and dual purpose street and track vehicles. For trucks and SUV’s, it provides big stopping power for towing, off-road, and enhanced braking with a wheel and tire upgrades. Kits listed for specific vehicles are fully compatible with OE master cylinder output and ABS function. Directional staggered vane 14.25” rotors provide maximum cooling for sustained high heat durability. Calipers W6A Radial Mount The W6A forged six-piston caliper delivers heavy duty stopping power for the road or track. The caliper incorporates race technology into a body design with widespread adaptability. Radial mounting, two options for piston volume, and a rotor diameter ranging from 12.19" to 14.25" give this caliper the versatility necessary to suit all types of heavyweight braking requirements. The W6A body is the product of FEA computer design and stress flow forging technology. FEA technology allows the designer to test the prototype in a computer environment to determine the optimal structural design within the dimensional parameters of the component. Stress flow forging produces a part with the internal grain structure of the metal aligned in the direction of the flow of the body contour. The results are a caliper with superior clamping efficiency and ultimate strength against fatigue, stresses, and distortion under load. This caliper generates big brake clamping force with six differential bore stainless steel pistons. Stainless steel is used for its high resistance to corrosion and low thermal conductivity that reduces the heat transfer from the pads. The differential bore pattern balances pad loading to help maintain even pad wear. High-temperature bore seals provide long service life and maintain their resilience to provide positive piston retraction on release. Two options for overall piston volume make it simple to match the calipers with master cylinder output and rear caliper size for correct bias proportioning. The performance of the W6A is enhanced with SRS bridge plates, snap-ring locked pad retainer pins, recessed two-piece bleed screw assemblies and dampen mounted fluid transfer tubes. SRS bridge plates eliminate all bridge wear caused by pad gouging. The spring-loaded action of the plates also eliminates pad rattle. Snap ring clips lock the pad pins in place to provide positive retention and allow easy service without caliper removal. The bleed screws are recess mounted for protection against impact and debris. The fluid tubes are dampen mounted to protect them from fatigue or damage from vibration or debris. Calipers are anodized in high luster black to protect from corrosion and maintain their high-tech appearance. The W6A is also available with a gloss red finish or other custom Wilwood color by order. Radial-mount adapter brackets are used in Wilwood brake kits to provide a secure and precise method of attaching the W6A caliper to the factory mount bosses on the original spindle. Rotors SRP Drilled Performance Rotor SRP Drilled Performance Rotors feature a specially engineered directional cross drill and face slot pattern that improve brake response and pad performance throughout the entire range of light to heavy braking. The venting and cleaning action of the holes and slots will reduce pad glaze and disperse gasses and heat generated during the pad to rotor interface. The holes and slots also inhibit irregular pad compound build-up on the rotor faces resulting in smoother engagement and improved pedal response in all conditions. The material removed also contributes to lower rotating and unsprung suspension weight. Along with the excellent performance characteristics of this rotor design, each rotor is treated with a black electro-coat to inhibit corrosion on all areas of the rotor. The high tech design, classic style, and aesthetic appeal of the SRP series are the perfect finishing touches to any wheel and tire detail. SRP rotors are available in all popular sizes used in Wilwood's Pro Series and Big Brake conversion kits. Kits in these categories designated with the drilled rotor option get the SRP as standard equipment. Rotor Hats Big Brake - Short Offset GT Series Big Brake Short Offset hats are precision machined from premium aluminum alloys for high strength and attention to minimized weight. Hats in this category feature threaded rotor mount holes for use with standard through-hole mount rotors. Threaded hole hats may also be used with T-Nuts or bobbins designed for use with specially machined slotted hole dynamic mount rotors. When used in conjunction with matched Wilwood rotor hardware kits, GT hats provide solid, reliable performance in the most demanding conditions. Short Offset Hats are for narrow space applications with offsets often less than 1.00". They are available for most rotor bolt patterns in a variety of four and five lug wheel patterns. Shallow Offset Hats are for narrow space applications with offsets often less than 1.00". They are available for most rotor bolt patterns in a variety of four and five lug wheel patterns. Check clearance diagram below to ensure proper fitment with your wheel application. Application: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette, Z06 .
  • C6 Corvette  Grand Sport Brembo GT Front Brake Kit

    C6 Corvette Grand Sport Brembo GT Front Brake Kit

    Regular Price: $3,999.00

    Special Price $3,799.99

    We all want massive HP and acceleration for our C6 Corvette. 0-60 and quarter mile times are a metric every C6 Corvette owner knows and wants to improve their car. But what about stopping, 60-0? The Stock Z06 brakes are awesome for the street and good on the track, but with moderate track use, the stock C6 Corvette Grand Sport brakes will start to suffer from fade, increased pedal travel, and get a spongy feel. Every other aspect of the car is track ready right off the showroom floor. If you are going to be taking your Z06 to the track, upgrading the brakes is a must. This is a complete Brembo GT Front C6 Corvette Grand Sport GT Monobloc kit. Each Kit comes complete with  Brembo calipers with anti-rattle clips High performance street/autocross pads by Ferodo are preloaded in the calipers Discs are preassembled with a zinc plated, high carbon disc and an aluminum hat Floating McLaren hardware, originally designed for the road-going McLaren supercar, is used to secure the hat to the disc Brembo designed billet aluminum brackets and hardware Goodridge Stainless braided lines Complete installation instructions Please note, some applicatations may require wheel spacers depending upon wheel offset and clearance.Brembo Front Setup Six Piston Brembo Calipers (Black, Red, Yellow, or Silver)Size of your choosing, 2-Piece Rotors (Choice of Drilled or Slotted) ->Not all rotors sizes fit behind OEM wheels. Make sure you know what size wheels you will be using before choosing your rotor size. As a "general" rule, the rotor size should be no more than 4" below what your wheel size is. For example, 19" Wheels, rotor size should not be bigger than 15" or 381mm. Brembo GT Kit Benefits The Brembo GT (Gran Turismo ) line is dedicated to the most demanding customers. This braking system originates from the Racing components, consisting of a ventilated, integral or composite disc, available drilled or slotted, 4, 6 and 8 piston aluminum calipers, a complete set of high-performance brake pads, metal braid tubes and high-quality small parts.1. High-Performance Friction Material: Aggressive pads that provide thehighest level of performance.2. Cross-Drilled or Slotted Discs: Clears gasses, cleans pads for better“bite”.3. Mounting Brackets and Assembly Hardware: Aircraft quality includedand pre-torqued specifications.4. Stainless Steel Braided Brake Line: DOT/TÜV approved.5. “Floating” Disc Mounting System with Billet Aluminium Hat: Reduce “Unsprung Weight” for better handling and reduces heat-related stress; increases brake performance and pedal feel.6. Four, Six or Eight Piston Cast Aluminium Calipers: Provide maximum braking force without the flex of sliding calipers.Comparison between floating 2-piece and 1-piece discs The floating disc mounting system, due to the aluminum alloy hat, reduces the “unsprung” weight for better handling and reduces heat-related stress: the mounting system is designed to allow a specific amount of float in both radial and axial directions. Brembo has engineered special springs that are used on every other fastener in order to slightly preload the assembly. This has been done to prevent excessive noise from the system during street use. The one-piece discs (both for the Sport and GT lines) are specifically designed in the goose-neck area to minimize thermal distortion and thus disc warping under severe use conditions. The one-piece discs provide excellent stopping power ranging from everyday traffic conditions to more spirited high-performance driving and fit into the budget of any enthusiast. Free Domestic Ground Shipping Application: 2010, 2011, 2012, 2013 C6 Corvette Grand Sport
  • C6 Corvette  Z06 and GS GT-R Brembo Rear Brake Kit

    C6 Corvette Z06 and GS GT-R Brembo Rear Brake Kit

    $7,575.00
    Free Shipping
    รขโ‚ฌโ€นThe Brembo GT-R braking systems for the C6 Corvette Z06 are designed to meet the needs of aggressive braking whether on the road or the track, and that's a good thing as the ultra powerful LS7 engine line can get the C6 Z06 going very fast. Brembo C6 Corvette Z06 GT-R Big Brakes are the most advanced expression of all Brembo's experience in braking system design. The GT-R C6 Corvette Big Brake Kit is comprised of single block billet aluminium calipers with 4 and 6 piston radial attachment, two piece floating discs, pads with different friction material and high performance hardware.   Single block calipers in billet aluminium with racing characteristics:  lightweight, rigid and resistant to high temperatures The GT-R calipers are made from billet aluminium with radial 4 and 6 piston attachments. They reduce the non suspended weight, improving the dynamics and vehicle performance. They are designed to provide a constant locking strength and the sensation of a stable and reliable pedal. The pistons with stainless steel radiators allow a significant reduction of heat passage during extreme driving, reducing brake wear to a minimum. In order to guarantee protection against corrosion and to provide high quality in the field, the GT-R calipers are nickel plated and have the Brembo logo CNC machined in red embossing. The GT-R system has been designed for the driver who demands exceptional performance on the street and on the track. It includes 4 or 6-piston monobloc calipers, two-piece floating brake rotors, a selection of friction materials and all the necessary hardware to insure seamless installation. The GT-R calipers are machined entirely from billet like a $10,000 race caliper, not cast like our GT calipers. Billet calipers include the benefits of a full race brake system: more stiffness, lighter weight (GT-R calipers achieve a weight reduction up to 10 percent compared to casted versions) and more thermo-mechanical resistance. The nickel-plated finish provides additional treatment against corrosion and ensures a long lasting, attractive look. The pistons, complete with stainless steel inserts, provide an additional heat barrier virtually eliminating fade even during max-limit and on-track driving. Unique dual inner seals design keeps the seals away from excess heat. The inner seal acts as a pressure seal, with the outer seal acting as a wiper for long seal life in extreme conditions. The calipers provide less brake fluid absorption and a stiffer pedal feel delivering consistent clamping force suited for drivers wanting to make the most of every second.   Two piece floating discs to reduce the suspended weight and dissipate heat quickly GT-R braking systems include two piece floating discs which reduce the suspended weight and dissipate heat quickly. The floating disc's anti-noise hardware is the direct result of Brembo's experience with brakes designed for Formula 1 competition.     Pads provide optimum performance in various driving conditionsThe GT-R range offers a series of friction material which is able to meet a wide range of driving types. It offer optimum performance in various driving conditions, both on and off the track. In addition to the High Performance road pads, pads with racing/track friction material are also available. In order to guarantee correct installation without problems, the GT-R kit includes all the necessary hardware elements such as billet brackets and installation adaptors as well as stainless steel Goodridge brake pipes.   ->Not all rotors sizes fit behind OEM wheels. Make sure you know what size wheels you will be using before choosing your rotor size. As a "general" rule, the rotor size should be no more than 4" below what your wheel size is. For example, 19" Wheels, rotor size should not be bigger than 15" or 380mm.
  • C6 Corvette Brembo GT Front Brake Kit

    C6 Corvette Brembo GT Front Brake Kit

    Regular Price: $3,695.00

    Special Price $3,595.00

    Free Shipping
    We all want massive HP and acceleration for our C6 Corvette. 0-60 and quarter mile times are a metric every C6 Corvette owner knows and wants to improve their car. But what about stopping, 60-0? The Stock C6 Corvette brakes are awesome for the street and good on the track, but with moderate track use, the stock C6 Corvette Coupe, Convertible, and Z51 brakes will start to suffer from fade, increased pedal travel, and get a spongy feel. Every other aspect of the car is track ready right off the showroom floor. If you are going to be taking your C6 Corvette to the track, upgrading the brakes is a must. This is a complete Brembo GT Front C6 Corvette Base or Z51 (non-Grand Sport, or Z06) GT Monobloc kit Brembo upgrade kit. Each Kit comes complete with  Brembo calipers with anti-rattle clips High-performance street/autocross pads by Ferodo are preloaded in the calipers Discs are preassembled with a zinc plated, high carbon disc and an aluminum hat Floating McLaren hardware, originally designed for the road-going McLaren supercar, is used to secure the hat to the disc Brembo designed billet aluminum brackets and hardware Goodridge Stainless braided lines Complete installation instructions Please note, some applications may require wheel spacers depending upon wheel offset and clearance.Brembo Front SetupSix Piston Brembo Calipers (Black, Red, Yellow, or Silver)Size of your choosing, 2-Piece Rotors (Choice of Drilled or Slotted) ->Not all rotors sizes fit behind OEM wheels. Make sure you know what size wheels you will be using before choosing your rotor size. As a "general" rule, the rotor size should be no more than 4" below what your wheel size is. For example, 19" Wheels, rotor size should not be bigger than 15" or 381mm. Brembo GT Kit BenefitsThe Brembo GT (Gran Turismo ) line is dedicated to the most demanding customers. This braking system originates from the Racing components, consisting of a ventilated, integral or composite disc, available drilled or slotted, 4, 6 and 8 piston aluminum calipers, a complete set of high-performance brake pads, metal braid tubes and high-quality small parts.1. High-Performance Friction Material: Aggressive pads that provide thehighest level of performance.2. Cross-Drilled or Slotted Discs: Clears gasses, cleans pads for better“bite”.3. Mounting Brackets and Assembly Hardware: Aircraft quality includedand pre-torqued specifications.4. Stainless Steel Braided Brake Line: DOT/TÜV approved.5. “Floating” Disc Mounting System with Billet Aluminium Hat: Reduce “Unsprung Weight” for better handling and reduces heat-related stress; increases brake performance and pedal feel.6. Four, Six or Eight Piston Cast Aluminium Calipers: Provide maximum braking force without the flex of sliding calipers.Comparison between floating 2-piece and 1-piece discs The floating disc mounting system, due to the aluminum alloy hat, reduces the “unsprung” weight for better handling and reduces heat-related stress: the mounting system is designed to allow a specific amount of float in both radial and axial directions. Brembo has engineered special springs that are used on every other fastener in order to slightly preload the assembly. This has been done to prevent excessive noise from the system during street use. The one-piece discs (both for the Sport and GT lines) are specifically designed in the goose-neck area to minimize thermal distortion and thus disc warping under severe use conditions. The one-piece discs provide excellent stopping power ranging from everyday traffic conditions to more spirited high-performance driving and fit into the budget of any enthusiast. Free Domestic Ground Shipping Application: 2005, 2006, 2007, 2008, 2010, 2011, 2012, 2013 C6 Corvette
  • C6 Corvette  GT-R Brembo Rear Brake Kit

    C6 Corvette GT-R Brembo Rear Brake Kit

    $7,575.00
    Free Shipping
    Fits all Base C6 Corvettes, including those with the Z51 Brake Package รขโ‚ฌโ€น The Brembo GT-R braking systems for the C6 Corvette are designed to meet the needs of aggressive braking whether on the road or the track, and that's a good thing as the ultra powerful LS engine line can get the C6 Corvette going very fast. Brembo C6 Corvette GT-R Big Brakes are the most advanced expression of all Brembo's experience in braking system design. The GT-R C6 Corvette Big Brake Kit is comprised of single block billet aluminium calipers with 4 and 6 piston radial attachment, two piece floating discs, pads with different friction material and high performance hardware.   Single block calipers in billet aluminium with racing characteristics:  lightweight, rigid and resistant to high temperatures The GT-R calipers are made from billet aluminium with radial 4 and 6 piston attachments. They reduce the non suspended weight, improving the dynamics and vehicle performance. They are designed to provide a constant locking strength and the sensation of a stable and reliable pedal. The pistons with stainless steel radiators allow a significant reduction of heat passage during extreme driving, reducing brake wear to a minimum. In order to guarantee protection against corrosion and to provide high quality in the field, the GT-R calipers are nickel plated and have the Brembo logo CNC machined in red embossing. The GT-R system has been designed for the driver who demands exceptional performance on the street and on the track. It includes 4 or 6-piston monobloc calipers, two-piece floating brake rotors, a selection of friction materials and all the necessary hardware to insure seamless installation. The GT-R calipers are machined entirely from billet like a $10,000 race caliper, not cast like our GT calipers. Billet calipers include the benefits of a full race brake system: more stiffness, lighter weight (GT-R calipers achieve a weight reduction up to 10 percent compared to casted versions) and more thermo-mechanical resistance. The nickel-plated finish provides additional treatment against corrosion and ensures a long lasting, attractive look. The pistons, complete with stainless steel inserts, provide an additional heat barrier virtually eliminating fade even during max-limit and on-track driving. Unique dual inner seals design keeps the seals away from excess heat. The inner seal acts as a pressure seal, with the outer seal acting as a wiper for long seal life in extreme conditions. The calipers provide less brake fluid absorption and a stiffer pedal feel delivering consistent clamping force suited for drivers wanting to make the most of every second.   Two piece floating discs to reduce the suspended weight and dissipate heat quickly GT-R braking systems include two piece floating discs which reduce the suspended weight and dissipate heat quickly. The floating disc's anti-noise hardware is the direct result of Brembo's experience with brakes designed for Formula 1 competition.     Pads provide optimum performance in various driving conditionsThe GT-R range offers a series of friction material which is able to meet a wide range of driving types. It offer optimum performance in various driving conditions, both on and off the track. In addition to the High Performance road pads, pads with racing/track friction material are also available. In order to guarantee correct installation without problems, the GT-R kit includes all the necessary hardware elements such as billet brackets and installation adaptors as well as stainless steel Goodridge brake pipes.   ->Not all rotors sizes fit behind OEM wheels. Make sure you know what size wheels you will be using before choosing your rotor size. As a "general" rule, the rotor size should be no more than 4" below what your wheel size is. For example, 19" Wheels, rotor size should not be bigger than 15" or 380mm.
  • C6 Corvette Z06 Brembo GT Front Brake Kit

    C6 Corvette Z06 Brembo GT Front Brake Kit

    $3,931.20
    Free Shipping
    We all want massive HP and acceleration for our C6 Corvette. 0-60 and quarter mile times are a metric every C6 Corvette owner knows and wants to improve their car. But what about stopping, 60-0? The Stock Z06 brakes are awesome for the street and good on the track, but with moderate track use, the stock C6 Corvette Z06 brakes will start to suffer from fade, increased pedal travel, and get a spongy feel. Every other aspect of the car is track ready right off the showroom floor. If you are going to be taking your Z06 to the track, upgrading the brakes is a must. This is a complete Brembo GT Front C6 Corvette Z06 GT Monobloc kit. Each Kit comes complete with  Brembo calipers with anti-rattle clips High-performance street/autocross pads by Ferodo are preloaded in the calipers Discs are preassembled with a zinc plated, high carbon disc and an aluminum hat Floating McLaren hardware, originally designed for the road-going McLaren supercar, is used to secure the hat to the disc Brembo designed billet aluminum brackets and hardware Goodridge Stainless braided lines Complete installation instructions Please note, some applications may require wheel spacers depending upon wheel offset and clearance.Brembo Front Setup Six Piston Brembo Calipers (Black, Red, Yellow, or Silver)Size of your choosing, 2-Piece Rotors (Choice of Drilled or Slotted) ->Not all rotors sizes fit behind OEM wheels. Make sure you know what size wheels you will be using before choosing your rotor size. As a "general" rule, the rotor size should be no more than 4" below what your wheel size is. For example, 19" Wheels, rotor size should not be bigger than 15" or 381mm. Brembo GT Kit Benefits The Brembo GT (Gran Turismo ) line is dedicated to the most demanding customers. This braking system originates from the Racing components, consisting of a ventilated, integral or composite disc, available drilled or slotted, 4, 6 and 8 piston aluminum calipers, a complete set of high-performance brake pads, metal braid tubes and high-quality small parts.1. High-Performance Friction Material: Aggressive pads that provide thehighest level of performance.2. Cross-Drilled or Slotted Discs: Clears gasses, cleans pads for better“bite”.3. Mounting Brackets and Assembly Hardware: Aircraft quality includedand pre-torqued specifications.4. Stainless Steel Braided Brake Line: DOT/TÜV approved.5. “Floating” Disc Mounting System with Billet Aluminium Hat: Reduce “Unsprung Weight” for better handling and reduces heat-related stress; increases brake performance and pedal feel.6. Four, Six or Eight Piston Cast Aluminium Calipers: Provide maximum braking force without the flex of sliding calipers.Comparison between floating 2-piece and 1-piece discs The floating disc mounting system, due to the aluminum alloy hat, reduces the “unsprung” weight for better handling and reduces heat-related stress: the mounting system is designed to allow a specific amount of float in both radial and axial directions. Brembo has engineered special springs that are used on every other fastener in order to slightly preload the assembly. This has been done to prevent excessive noise from the system during street use. The one-piece discs (both for the Sport and GT lines) are specifically designed in the goose-neck area to minimize thermal distortion and thus disc warping under severe use conditions. The one-piece discs provide excellent stopping power ranging from everyday traffic conditions to more spirited high-performance driving and fit into the budget of any enthusiast. Free Domestic Ground Shipping Application: 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette

12 Item(s)

Grid List

Set Descending Direction
Corvette C6 Big Brake Kits

Minimal Price: $ 1,999.00 1999

X