Call Us: 888-631-1433
COUPON CODES     SCP5: $5 OFF ORDERS OVER $125    SCP25: $25 OFF ORDERS OVER $275   SCP50 $50 OFF ORDERS OVER $550
Painted Parts are painted to order and take additional time, right now we are about a 4-5 week lead time. Please keep this in mind.

        C6 Corvette Z06 Removable Front License Plate

        C6 Corvette Z06 Removable Front License Plate Bracket

        For the Corvette Z06 and Grand Sport (2006-2013)
        Do you live in a state where a front license plate is mandatory? We have a solution for all you C6 Corvette Z06 owners that gives you the ability to easily put on and take off your front plate at will. With our patented locking design, you can simply snap the plate into place and pull it off when you do not want it on the car. When it is off of the car, you cannot even tell that there was supposed to be a plate on the car. No adhesives or glue is used and the plate is a completely paint touch-free, not part of the plate bracket assembly touches the painted surface of your car. Install is fairly simple and can be reversed without leaving holes in your Corvette.

        corvetteC6 z06 front license plate, corvette removable license plate, corvete z06 license plate
         

        Installation instructions:

        Parts List

        • Mounting bracket
        • Removable plate frame
        • ¼-20 X 1.5” machine screw
        • ¼ 20 Wingnut
        • 2 - ¼-20 X 5/8” machine screws

        Tools needed

        • ¼” drive nut driver handle
        • 7mm socket
        • Flat blade screwdriver

        Installation:

        1. Jack up car and place on the jack stands in such a manner to gain easy access to the bottom of the front bumper. Refer to user’s manual for correct jacking procedure.
        2. With the 7mm socket and nut driver handle to remove and save the 7mm screws that hold the lower air dam to the fascia at the three slots on the left (driver’s) side of the car. Remove the 7mm screws on either side of the driver’s side skid plate at the back of the fascia and pull the fascia down slightly to gain access to the top of the skid plate.
        3. Using the 7mm screws mount the forward portion of the mounting bracket to the fascia behind the air dam but do not tighten the screws as you will need to adjust the mount left or right to get proper alignment.
        4. Push the bracket up against the skid plate and insert the machine screw through the two slotted holes in the mount. Install the wing nut and hand tighten.
        5. Replace the rear section of the fascia, install screws, and tighten.
        6. Insert frame through the lower air dam holes and into the mounting bracket until it snaps into place. Noting where the alignment of the plate frame through the holes is equidistant from each side of the air dam holes, pull out the plate frame and tighten the front 7mm screws.
        7. Lower car off the jack stands.
        8. Insert your license plate into the plate frame and install the ¼” 20 X 5/8” screws into the lower two holes in the plate frame.
        9. Installation is now complete

        You can order the carry bag here.

        ONLY $169.95

        ****The plate will NOT work if you have a Vararam intake installed as the Vararam blocks our installation bracket****

        Application: 2006, 2007, 2008, 2009, 2010, 2011, 2012, 2013 C6 Corvette ZO6

        0.0
        • $169.95

        OR
          • SKU
            030-007
          • Weight
            2 lbs
        • Configurator Products
          No
        • Configurator Status
          No
        • Covercraft Status
          No
        • Disable loading on additional products
          No
        • Disallow Use of Coupons
          No
        • MPN
          030-007
        • Part Number_333224
          030-007
        • Select Featured
          No
        Customer reviews
        Please sign in to add review
        There are no comments yet. Be the first to leave a comment

        We accept the following payment methods:

        Accepted payment methods

        Shipping

        We utilize UPS, Fedex, and USPS for all of our shipping needs. Carrier choice is based upon availability and needs of the customer and is the sole discretion of SouthernCarParts. We always try to ship within 24 hours of order placement (do to the custom nature of some products, shipping within 24 hours is impossible, actual shipping time frames will be listed in the product description). Please keep in mind that some products such as Custom Fit Car Covers, Lloyds Floor Mats, Painted accessories, and Racemesh Products can take 3 -10 days to ship and are charged at time of order placement. Racemesh products take 4 weeks to ship as they are made to order.

        Returns


        Should you need to return a part for refund, exchange, or credit, please contact our returns department within 30 days of purchase at orders@southerncarparts.com for a Return Merchandise Authorization (RMA) number. Most problems, such as installation, can be solved with a telephone call (888-631-1433). Southern Car Parts will not accept returned goods without prior authorization and an RMA# written clearly on the exterior of the box. The customer is responsible for freight on all return orders. Parts authorized to be returned, on a non-exchange basis, are subject to a 20% restocking fee. Returns will only be accepted within 30 days of the original date of shipment.  Custom painted parts - Once these parts are started, we can refund you less the paint(chemicals) that have been used. Exception is rear spoilers and front splitters, we can refund less 20%.

        Custom-made-to-order items are NOT returnable. This includes embroidered floor mats and car covers.
        Damages in Shipping

        All damages from shipping must be reported to Southern Car Parts within two business days from tracking number delivery confirmation. After two business days, damages become the responsibility of the customer.