Call Us: 888-631-1433
COUPON CODES     SCP5: $5 OFF ORDERS OVER $125    SCP25: $25 OFF ORDERS OVER $275   SCP50 $50 OFF ORDERS OVER $550
Painted Parts are painted to order and take additional time, right now we are about a 6-8 week lead time. Please keep this in mind.

        2008-2019 Challenger RT Brembo GT Front Brake Kit

         
        0.0
        Brembo
          • 10% less
          Market price: $3978.00, you save $378.00
        • $3600.00

        OR

        2008-2019 Challenger RT Front Brembo GT Big Brake Kit

        For the Challenger RT 2008+

        We all want massive HP and acceleration for our Dodge Challenger RT. 0-60 and quarter mile times are a metric every Challenger owner knows and wants to improve on their car. But what about stopping, 60-0? The OEM Challenger brakes are awesome for the street and good on the track, but with moderate track use, the stock Challenger brakes will start to suffer from fade, increased pedal travel, and get a spongy feel. Every other aspect of the car is track ready right off the showroom floor. If you are going to be taking your Challenger to the track, upgrading the brakes is a must. If you love performace, you will love the Brembo Challenger brake kit.

        Dodge Challneger GT Monobloc brake kit

        This is a complete Brembo GT Front Challenger RT GT Monobloc kit Brembo upgrade kit.


        Challenger RT Brembo GT Front Brake Kit

        Each Kit comes complete with  

        • Brembo calipers with anti-rattle clips
        • High performance street/autocross pads by Ferodo are preloaded in the calipers

        • Discs are preassembled with a zinc plated, high carbon disc and an aluminum hat

        • Floating McLaren hardware, originally designed for the road-going McLaren supercar, is used to secure the hat to the disc

        • Brembo designed billet aluminum brackets and hardware

        • Goodridge Stainless braided lines

        • Complete installation instructions
        • Please note, some applicatations may require wheel spacers depending upon wheel offset and clearance.

        Brembo Front Setup
        Six Piston Brembo Calipers (Black, Red, Yellow, or Silver)
        Size of your choosing, 2-Piece Rotors (Choice of Drilled or Slotted)

          ->Not all rotors sizes fit behind OEM wheels. Make sure you know what size wheels you will be using before choosing your rotor size. As a "general" rule, the rotor size should be no more than 4" below what your wheel size is. For example, 19" Wheels, rotor size should not be bigger than 15" or 380mm.



        Dodge Challenger Brembo GT Brakes


        dodge challenger brake kit
        Challenger SRT8 Brembo GT Front Brake Kit

        Brembo GT Kit Benefits
        The Brembo GT (Gran Turismo ) line is dedicated to the most demanding customers. This braking system originates from the Racing components, consisting of a ventilated, integral or composite disc, available drilled or slotted, 4, 6 and 8 piston aluminium calipers, a complete set of high performance brake pads, metal braid tubes and high quality small parts.
        1. High Performance Friction Material: Aggressive pads that provide the
        highest level of performance.
        2. Cross-Drilled or Slotted Discs: Clears gasses, cleans pads for better
        “bite”.
        3. Mounting Brackets and Assembly Hardware: Aircraft quality included
        and pre-torqued specifications.
        4. Stainless Steel Braided Brake Line: DOT/TÜV approved.
        5. “Floating” Disc Mounting System with Billet Aluminium Hat: Reduce “Unsprung Weight” for better handling and reduces heat-related stress; increases brake performance and pedal feel.
        6. Four, Six or Eight Piston Cast Aluminium Calipers: Provide maximum braking force without the flex of sliding calipers.
        Comparison between floating 2-piece and 1-piece discs The floating disc mounting system, due to the aluminium alloy hat, reduces the “unsprung” weight for better handling and reduces heat-related stress: the mounting system is designed to allow a specific amount of float in both radial and axial directions.

        Brembo has engineered special springs that are used on every other fastener in order to slightly preload the assembly. This has been done to prevent excessive noise from the system during street use. The one-piece discs (both for the Sport and GT lines) are specifically designed in the goose-neck area to minimize thermal distortion and thus disc warping under severe use conditions. The one-piece discs provide excellent stopping power ranging from everyday traffic conditions to more spirited high performance driving, and fit into the budget of any enthusiast.

         

        dodge challenger brembo big brake kit

          • SKU
            1N1.9005A-1
          • Weight
            80 lbs
        • Manufacturer
          Brembo
        • Configurator Products
          No
        • Configurator Status
          No
        • Covercraft Status
          No
        • Disable loading on additional products
          No
        • Disallow Use of Coupons
          No
        • Select Featured
          No
        • Caliper Color
          Yellow, Silver, Red, Black
        • Rotor Size
          380x34 - 6 Piston Calipers - (1NX.9004A), 355x32 - 6 Piston Calipers - (1MX.8027A), 355x32 - 4 Piston Calipers - (1BX.8044A)
        • Rotor Type
          Drilled, Slotted
        Customer reviews
        Please sign in to add review
        There are no comments yet. Be the first to leave a comment

        We accept the following payment methods:

        Accepted payment methods

        Shipping

        We utilize UPS, Fedex, and USPS for all of our shipping needs. Carrier choice is based upon availability and needs of the customer and is the sole discretion of SouthernCarParts. We always try to ship within 24 hours of order placement (do to the custom nature of some products, shipping within 24 hours is impossible, actual shipping time frames will be listed in the product description). Please keep in mind that some products such as Custom Fit Car Covers, Lloyds Floor Mats, Painted accessories, and Racemesh Products can take 3 -10 days to ship and are charged at time of order placement. Racemesh products take 4 weeks to ship as they are made to order.

        Returns


        Should you need to return a part for refund, exchange, or credit, please contact our returns department within 30 days of purchase at orders@southerncarparts.com for a Return Merchandise Authorization (RMA) number. Most problems, such as installation, can be solved with a telephone call (888-631-1433). Southern Car Parts will not accept returned goods without prior authorization and an RMA# written clearly on the exterior of the box. The customer is responsible for freight on all return orders. Parts authorized to be returned, on a non-exchange basis, are subject to a 20% restocking fee. Returns will only be accepted within 30 days of the original date of shipment.  Custom painted parts - Once these parts are started, we can refund you less the paint(chemicals) that have been used. Exception is rear spoilers and front splitters, we can refund less 20%.

        Custom-made-to-order items are NOT returnable. This includes embroidered floor mats and car covers.
        Damages in Shipping

        All damages from shipping must be reported to Southern Car Parts within two business days from tracking number delivery confirmation. After two business days, damages become the responsibility of the customer.