Call Us: 888-631-1433
Painted Parts are painted to order and take additional time, right now we are about a 6-8 week lead time. Please keep this in mind.

        C6 Corvette Z06 Brembo GT Monobloc Front Rotors

          • 10% less
          Market price: $1180.14, you save $112.14
        • $1068.00


        2006-2013 C6 Corvette Z06 GT Brembo Monobloc Replacement Rotors

        C6 Corvette Z06 Brembo Rotors

        These are the C6 Corvette Z06 (2006-present Z06 only) Brembo GT Monobloc replacement front rotors. Available in slotted or drilled, they are the exact replacement rotors needed for your C6 Corvette Z06 Brembo Monobloc kit (please note these are not OEM rotors that will NOT fit on the OEM Z06 brakes ). You need to of upgraded your brakes to the Brembo C6 Corvette Z06 Monobloc GT Kit for these rotors to be applicable on your C6 Corvette Z06.

        Please Read: The 2-piece rotor assemblies in Brembo GT systems are made up of three primary components; disc (outer ring), disc hardware and bell or hat (black aluminum center portion).

        Discs and disc hardware are standard wear items. Bells/Hats, however, may be re-used if properly inspected and there are no visible signs of wear. The life of these components will vary based on the vehicle, driver and driving conditions.
        Discs should be replaced if any of the following occur: Disc exceeds minimum thickness, causes steering wheel feedback (due to uneven pad transfer) or shows signs of excessive cracking. The minimum thickness is stamped on the edge of the disc. (See image 3)
        Disc hardware must be replaced each time a disc is replaced. If the hardware is re-used and out of tolerance, it may dramatically accelerate the wear of both the disc and bell. 
        Bells should be inspected for wear each time a disc is replaced. The bell can typically be re-used unless there are signs of visible wear. Re-using a bell that is out of tolerance will dramatically accelerate the wear of the disc and the disc hardware. Worn bells may prevent the hardware from working properly and cause the disc to rattle.

        Our Brembo C6 Corvette Rotor Kits come complete with all hardware and rotor rings. Does not include the center hat/bell.

        This is for the front pair of rotors rings (left and right) and is sized as 365mm x 34mm 2 Piece Rotors or 380MM complete with all mounting hardware (without the center bell) for the Brembo GT C6 Corvette Z06 kit. Please ensure your sizing and part number are correct before ordering. These rotors are compatible with Brembo kits C6 Corvette Z06 Brembo GT 1N1.8502A and 1N2.8502A

        Application: 2005, 2006, 2007, 2008, 2010, 2011, 2012, 2013 C6 Corvette

          • SKU
          • Weight
            45 lbs
          • Manufacturer Part #
        • Manufacturer
        • Configurator Products
        • Configurator Status
        • Covercraft Status
        • Disable loading on additional products
        • Disallow Use of Coupons
        • MPN
        • Part Number_333224
        • Select Featured
        • Size
          380x34 2 Piece, 365x34 2 Piece
        • Rotor Type
          Slotted (906554 906555), Drilled (906552 906553)
        Customer reviews
        Please sign in to add review
        There are no comments yet. Be the first to leave a comment

        We accept the following payment methods:

        Accepted payment methods


        We utilize UPS, Fedex, and USPS for all of our shipping needs. Carrier choice is based upon availability and needs of the customer and is the sole discretion of SouthernCarParts. We always try to ship within 24 hours of order placement (do to the custom nature of some products, shipping within 24 hours is impossible, actual shipping time frames will be listed in the product description). Please keep in mind that some products such as Custom Fit Car Covers, Lloyds Floor Mats, Painted accessories, and Racemesh Products can take 3 -10 days to ship and are charged at time of order placement. Racemesh products take 4 weeks to ship as they are made to order.


        Should you need to return a part for refund, exchange, or credit, please contact our returns department within 30 days of purchase at for a Return Merchandise Authorization (RMA) number. Most problems, such as installation, can be solved with a telephone call (888-631-1433). Southern Car Parts will not accept returned goods without prior authorization and an RMA# written clearly on the exterior of the box. The customer is responsible for freight on all return orders. Parts authorized to be returned, on a non-exchange basis, are subject to a 20% restocking fee. Returns will only be accepted within 30 days of the original date of shipment.  Custom painted parts - Once these parts are started, we can refund you less the paint(chemicals) that have been used. Exception is rear spoilers and front splitters, we can refund less 20%.

        Custom-made-to-order items are NOT returnable. This includes embroidered floor mats and car covers.
        Damages in Shipping

        All damages from shipping must be reported to Southern Car Parts within two business days from tracking number delivery confirmation. After two business days, damages become the responsibility of the customer.