Corvette C6 Exhaust


Corvette C6 Exhaust

C6 Corvette Exhaust Systems

Shop for C6 Corvette exhaust products from Southern Car Parts – you'll be thrilled you did! We supply many Corvette C6 exhaust components that will help you transform an ordinary 2005-2013 Corvette into a high-performance vehicle.

The Corvette's small-block V8 engine has a distinct note and an incredible power capability that miles above stock Corvette exhaust. Therefore, modifying and upgrading your Corvette for better performance and drivability will almost always begin with your Corvette exhaust system.

With Corvette exhaust systems from Southern Car Parts, you can upgrade your Corvette's performance and exhaust sound, tone and volume. This means you can enjoy an entire world of untapped potential available for your 6th generation Corvette.

Our C6 Corvette exhaust systems come from world-renowned brands like Akrapovic, Billy Boat, Borla and Corsa. That way, you're sure to find the best exhaust for your C6 Corvette – without exception.

In addition, we sell a broad array of Corvette exhaust products to fulfill your requests. With everything from Corvette exhaust plate products, Corsa exhaust for C6 Corvette models and C6 Corvette dual mode exhaust systems, you should have no trouble enhancing your 2005-2013 Corvette.

Corvette Exhaust Systems

Purchase Corvette Exhaust Components like Borla and Akrapovic from Southern Car Parts

At Southern Car Parts, we want to stand out from the competition. As such, we are more than just an ordinary Corvette exhaust systems provider, and for good reason.

The Southern Car Parts team includes Corvette exhaust experts who are passionate about 2005-2013 Corvette models. Our team members can teach you about the intricacies of assorted C6 Corvette exhaust plate options, how to select the best exhaust for C6 Corvette models and much more. As a result, we can help you streamline the process of finding the right Corvette exhaust products for your 2005-2013 Corvette.

Perhaps best of all, Southern Car Parts offers unbeatable prices on high-quality Corvette exhaust products. Our Corvette exhaust inventory consists of top-notch products at significant discounts, guaranteeing you can pick up the Corvette exhaust parts and accessories you need without spending too much.

Choose Southern Car Parts for Corvette Exhaust Products

Discover the latest and greatest exhaust products for your 2005, 2006, 2007, 2008, 2009, 2010, 2011, 2012 or 2013 Corvette from Southern Car Parts. We will help you find the right Corvette exhaust components to satisfy your vehicle needs.

Each and every Corvette exhaust system we sell is a complete system. Whether it is an axle-back or cat-back system, there's no chance of receiving only the Corvette mufflers or needing other exhaust piping pieces for installation.

Browse our large selection of 2005-2013 Corvette exhaust products today, and ultimately, you can reap the benefits of superior C6 Corvette parts and accessories.

1-48 of 95

Page:
  1. 1
  2. 2

Grid List

Set Descending Direction
  • C6 Corvette  Borla Touring Oval Axleback (11769)

    C6 Corvette Borla Touring Oval Axleback (11769)

    $1,286.99
    Free Shipping
    Touring Style - The least aggressive of the Borla Corvette Exhaust systems. If you are looking for something for aggressive, give the Multicore or Sport system a try. This is the original version of the Borla Touring exhaust for the 2009+ C6 Corvette. If you're looking for the new, reworked, and improved Touring system with new Touring mufflers, check out our Borla Touring 11810 Corvette Exhaust Listing. BORLA Cat-Back exhausts feature patented, straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy and the distinctive BORLA Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium austenitic stainless steel, superior to T-400 series knockoffs, to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. Best of all, BORLA stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.
  • C6 Corvette LS2 Corvette Header System (2008)

    C6 Corvette LS2 Corvette Header System (2008)

    $1,595.95
    This Complete "Bolt On" Kit has everything you need to put you out front of the competition. Engineered by the same team who produced the headers for the LS-1 spec engines that went into every ASA racecar. Race tried and true 2006-2011 year specific to eliminate clearance issues. Named “Monster Flow”  for their 1 7/8" primary tubes, and lack of weld seams.  In fact we have eliminated the elbow weld so the only weld after the flange is the collector seam. Melrose headers are constructed by hand to the highest of standards. Headers are constructed using aluminized steel primary tubes, 3/8” thick CNC cut flanges, and 3” collectors.       ALL THE FEATURES YOU WANT & NEED   100% Made in the USA Easy bolt on installation  Outstanding torque and HP gains Made in the USA Header primaries utilize mild carbon alumanized steel guaranteed to never crack     SF08R - Smooth Flow ceramic coated long tube headers with stainless steel high flow catalytic converter and x-pipe (direct fit to factory muffler section)  
  • C6 Corvette  Borla Sport (09+) Axle Back 11768

    C6 Corvette Borla Sport (09+) Axle Back 11768

    $1,179.99
    Free Shipping
    This is the Borla Stinger system for the 2009+ C6 Corvette. It has the legendary Borla stinger sound and is the most aggressive sounding exhaust that Borla offers for the 2009+ Corvette. This Borla system does NOT come with the X Pipe but will bolt right up to the OEM H pipe without any issue. You can expect a 10-15 HP increase from installing this free flowing stainless steel exhaust from Borla. This is a quad, oval tip system with rolled tips. Free shipping in the lower 48 states!
  • C6 Corvette  Borla Long Tube Headers (2009+)

    C6 Corvette Borla Long Tube Headers (2009+)

    $1,431.99
    Free Shipping
    If you're looking to improve the exhaust sound and vehicle performance of your Corvette, a new header set could be perfect for you. For HP and Torque numbers on a naturally aspirated engine air flow is the name of the game, and the stock exhaust and header systems installed on the LS3 are restrictive by comparison to the engine's potential. These incredible XR-1 headers, designed and manufactured by Borla Performance Industries, will help unlock the entirety of your Corvette's potential and increase HP and Torque numbers across the RPM range. All Borla products are manufactured from class-leading austenitic stainless steel materials that are extremely high quality and incredibly durable--ultimately ensuring that your headers will remain functional and attractive for the life of your Corvette. These headers are 1.75" with 2.75" collectors, Borla x-pipe, cat-less down pipes, and all necessary O2 harness extensions. All parts necessary for installation are included. Because of the extreme changes in air flow and engine power that you'll acquire as result of installation of these headers a proper tune is required with them. Be aware that a system without cats is not 50 state legal. For this reason, these Borla headers are built and meant for off-road and track-only Corvette applications. Fits all LS3 equipped C6 Corvettes: 2009 and newer 6.2L Base C6 Corvettes, as well as 2011 and newer Corvette Grand Sports. Compatible with both manual and automatic, as well Coupe and Convertible iterations.
  • C6 Corvette MagnaFlow 15282 Competition Cat Back Exhaust for LS2 and LS3

    C6 Corvette MagnaFlow 15282 Competition Cat Back Exhaust for LS2 and LS3

    $1,260.00
    Free Shipping
      The MagnaFlow Race Series Exhaust Systems are designed for the ultimate in high performance and the loudest most aggressive racecar sound possible. Race Series exhaust systems remove the restrictive OEM muffler to virtually eliminate backpressure and maximize exhaust flow. The Race Series is recommended for those seeking maximum performance, reduced mass, and a loud aggressive racecar exhaust tone that demands attention.  MagnaFlow's C6 Corvette Performance Exhaust systems are rugged, reliable, built to last, and their legendary straight-through, wide-open, stainless steel mufflers provide the smooth, deep tone they are famous for. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards.   These exhaust kits and cat-back systems feature mandrel bends to ensure there are no flow restrictions and OEM-style barbed hangers for easy installation. All of MagnaFlow's exhaust systems are factory-checked for proper fit and dyno-tested to verify performance gains. All necessary installation hardware is included and the entire system is backed by MagnaFlow's lifetime warranty.   Fits 2005-2007 6.0 Liter LS2 and 2008-2011 6.2 Liter LS3   Additional Information Tubing Outer Diameter: 2.5in. System Type: Cat-Back Tip Outer Diameter: 4 in. Tip Quantity: 4 Single or Dual: Dual Exit Style: Split Rear Material: 100% Stainless Steel Made in the U.S.A. All Mandrel Bent Tubing 409 Stainless Steel Construction Lifetime Warranty
  • C6 Corvette  Borla ATAK Exhaust System (140358) with X-Pipe

    C6 Corvette Borla ATAK Exhaust System (140358) with X-Pipe

    $1,921.99
    Free Shipping
    Using Borla's patented multi-core technology, and newly developed high-performance ATAK mufflers, this exhaust system for the C6 Corvette is one of the most aggressive and fantastic performance modification exhaust pieces available on the market today. Combining that powerful cat-back system with the high-quality and high-flow Borla X-Pipe makes for even more performance boosts. The high quality materials it is manufactured from and vehicle specific tuning for the Chevy Corvette, means this exhaust promises to offer fantastic bonuses to HP and Torque across the RPM range, as well as improved exterior styling, and a more loud and aggressive exhaust note. With quad 4" Round exhaust tips, the visual styling this exhaust offers is also an undeniable upgrade. All in all, this new 2.5" ATAK exhaust system from Borla is one of their finest over-all exhaust systems, and the most aggressive and powerful system available for the Corvette today. Attack the competition with the C6 Corvette ATAK Exhaust! This is the original Borla ATAK Exhaust System for the 2009+ C6 Corvette. For the new, advanced, and re-worked ATAK exhaust (with zero cabin drone thanks to new, retooled mufflers that don't sacrifice any of the tone or exterior volume) check out the Borla 140414 ATAK Exhaust Listing.   C6 Corvette '09-'10 6.2L V8  AT/MT(incl. paddle shift) RWD 2DR D RD RL AC SR "ATAK" WITH X-PIPE 2.5", 2" TIP 4" RD X 7" BORLA Cat-Back exhausts feature patented, straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy and the distinctive BORLA Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium austenitic stainless steel, superior to T-400 series knockoffs, to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. Best of all, BORLA stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.
  • 2009-2013 C6 Corvette Kooks Jet Hot Coated 1 3/4" Headers

    2009-2013 C6 Corvette Kooks Jet Hot Coated 1 3/4" Headers

    $1,263.60
    Free Shipping
    Quality 409 stainless steel headers designed and manufactured by Kooks. These C6 Corvette 1 3/4" headers are finished off in a Jet Hot coating ceramic finish. The finish is polished for an impressive shine. Unlike most headers that fade or rust, these Jet Hot coated headers will hold their polish for many years, in fact Kooks backs the finish by a lifetime warranty! The X-pipe design will help give your C6 Corvette that modern, deep rumble you are looking to achieve. As with nearly all of Kooks headers products, these are a quick and easy bolt-on application to your Corvette. Did we mention these Kooks headers are not only design in the USA but also built in America? Application: 2009, 2010, 2011, 2012, 2013 C6 Corvette About Kooks Headers At Kooks they have been providing tube bending as well as forming and fabrication of bent tube assemblies, for over 50 years. As a leading provider of parts and assemblies for the aviation and transportation industries, they have developed services that add value to the manufacturing process. Fabrication abilities include tube bending, end forming, boring, grinding, brazing, and welding of a variety of materials. Tube ends can be flared, flattened, swaged, beaded, or formed with a Victaulic groove. Properly forming the ends of the tube is an essential part to ensuring optimal performance of the assembly. They are capable of fabricating assemblies from a variety of standard metals including steel, stainless steel, aluminum, and brass. Inspection and testing capabilities include CMM equipment. If additional finishing and fabrication work is needed, trusted outside sources can be contracted, further simplifying customers’ supply chain. In developing welding and brazing services for the automotive industry, at Kooks Industries, Inc., they put a focus on precision and versatility. We offer a wide variety of welding services including: gas tungsten, gas metal, as well as resistance spot welding. Torch brazing is performed in-house while both standard and vacuum brazing are available through an outside partner. For high-volume weldments, 6-axis robotic MIG welding is available. Various non-destructive testing and inspection can be performed in-house and by third party certified weld inspectors, according to applicable industry standards.
  • C6 Corvette MagnaFlow 15283 Competition Cat Back Exhaust for 2009-2011 LS3

    C6 Corvette MagnaFlow 15283 Competition Cat Back Exhaust for 2009-2011 LS3

    $889.30
    Free Shipping
      The MagnaFlow Race Series Exhaust Systems are designed for the ultimate in high performance and the loudest most aggressive racecar sound possible. Race Series exhaust systems remove the restrictive OEM muffler to virtually eliminate backpressure and maximize exhaust flow. The Race Series is recommended for those seeking maximum performance, reduced mass, and a loud aggressive racecar exhaust tone that demands attention.  MagnaFlow's C6 Corvette Performance Exhaust systems are rugged, reliable, built to last, and their legendary straight-through, wide-open, stainless steel mufflers provide the smooth, deep tone they are famous for. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards.   These exhaust kits and cat-back systems feature mandrel bends to ensure there are no flow restrictions and OEM-style barbed hangers for easy installation. All of MagnaFlow's exhaust systems are factory-checked for proper fit and dyno-tested to verify performance gains. All necessary installation hardware is included and the entire system is backed by MagnaFlow's lifetime warranty.   Fits 2009-2011 6.2 Liter LS3   Additional Information Tubing Outer Diameter: 2.5in. System Type: Cat-Back Tip Outer Diameter: 4 in. Tip Quantity: 4 Single or Dual: Dual Exit Style: Split Rear Made in the U.S.A. All Mandrel Bent Tubing 409 Stainless Steel Construction Lifetime Warranty
  • C6 Corvette  Bassani Long Tube Headers

    C6 Corvette Bassani Long Tube Headers

    $1,330.00
    Free Shipping
    Bassani has been building exhaust systems for Motorcycles since 1969. Recognized as a leader in the industry, they are working their magic with the Corvette community now.  Bassani offers a complete line exhaust components for the C5 Corvette and C6 Corvette with a build quality and price that is second to none. These headers for the C6 Corvette are built with Mandrel bent, high quality stainless steel primary tubes for durability, and Gasketless Ball and socket connectors. What this means is that these headers combine the finest materials and the best manufacturing to offer a truly one-of-a-kind product. Bassani headers come ceramic coated for unmatched heat dispersion and thermal efficiency and feature their exclusive Extractor Collector technology, which induces a scavenging effect and further improves performance of the Corvette Exhaust System by evening out and increasing moving air flow through the headers back. "421" Longtube Headers, 1 7/8" to 2 1/8" stepped, 14g primary tubes, 2 1/2" collector. Ceramic Coated for max thermal efficiency. These Long-Tube Corvette headers provide power, quality, and efficiency in a complete package. Long tube headers provide HP and Torque gains across the entire RPM range, as well as improve exhaust tone and volume with a more solid crescendo up the RPM band. A custom tune is recommended with any complete header package, as the air flow and exhaust flow changes can cause your Corvette engine to throw codes if not tuned. Tunes also help to unlock the total power and performance that your headers can offer, so they're a generally good idea with any heavily modded Corvette. Also available are high-flow cat down pipes. These down pipes utilize metallic substrate Catalytic convertors to increase exhaust flow and improve sound and performance. Manufactured with the same attention to quality and performance that all Bassani components are made with, these mid-pipe Cat adaptors help allow your vehicle exhaust to breathe and flow better and help add to HP and Torque performance gains across the entire RPM range.
  • C6 Corvette Z06 Header System 2006-2013 LS7

    C6 Corvette Z06 Header System 2006-2013 LS7

    $1,595.95
    This Complete "Bolt On" Kit has everything you need to put you out front of the competition. Engineered by the same team who produced the headers for the LS-1 spec engines that went into every ASA racecar. Race tried and true 2006-2013 year specific to eliminate clearance issues. Named “Monster Flow”  for their 1 7/8" primary tubes, and lack of weld seams.  In fact we have eliminated the elbow weld so the only weld after the flange is the collector seam. Melrose headers are constructed by hand to the highest of standards. Headers are constructed using aluminized steel primary tubes, 3/8” thick CNC cut flanges, and 3” collectors.      Handmade in the USA  Easy bolt on installation  Outstanding torque and HP gains Fits all 2009 and up Corvette LS3 applications For Z06 please check our part# SF06RZ     SF06RZ - Smooth Flow ceramic coated long tube headers with stainless steel high flow catalytic converter and x-pipe (direct fit to factory muffler section)  
  • C6 Corvette 2009-2013 Flowmaster Exhaust System 817484

    C6 Corvette 2009-2013 Flowmaster Exhaust System 817484

    $949.97
    Free Shipping
    Flowmaster’s Force II Axle-Back system for the 2009-2013 Corvette (C6) is a quieter sounding system that is designed to replace the original rear mounted mufflers located behind the rear axle using factory style connections. With easy fit in mind, these systems are mandrel bent for maximum performance, include specially selected mufflers and all necessary parts and hardware for easy installation. Force II systems deliver a moderate exterior tone and moderate to mild interior tone, and are suited to customers looking for efficiency improvements without a lot of noise. Like all Flowmaster systems, the benefits include improved throttle response, power and mileage.   Mandrel bent 16 gauge 409 stainless tubing Moderate exterior exhaust tone Includes hangers and hardware for easy installation Dyno tuned for maximum performance Axle Back System Made in the USA Premium Flowmaster quality Incl. 2.5 in. Tubing 60 Series™ Muffler 3.5 in. Polished Stainless Tips Lifetime Warranty!
  • C6 Corvette  Borla XR-1 Long Tube Headers 17260

    C6 Corvette Borla XR-1 Long Tube Headers 17260

    $1,352.99
    Free Shipping
    These powerful, efficient, high-flowing XR-1 Long Tube headers by Borla for the 2005-Present C6 Corvette with the 6.0L or 6.2L (LS2 or LS3) engine are one of the most fantastic and effective exhaust modification pieces on the market today. With a combination of high-powered straight-through and intelligent multi-core technology, these headers give fantastic performance increases across the RPM range in both HP and Torque beyond what just a Borla exhaust will give you, which is already a lot. With 2.75" Collectors and advanced X-Pipe technology, the bonuses to sound, tone, and performance are undeniable. This is a complete Corvette Headers system with the X-Pipe included. Designed for off-road Corvette use only, and may not be street legal in all 50 states. FREE SHIPPING IN THE CONTINENTAL 48 STATES!!!
  • C6 Corvette LS2 Corvette Header System 2005-07 LS2

    C6 Corvette LS2 Corvette Header System 2005-07 LS2

    $1,595.95
    This Complete "E-Z Bolt On" Exhaust System has everything you need to put you out front of the competition. Specifically designed for your 2005, 2006, 2007 LS2 C6 Corvette eliminating clearance issues. Featuring "Inside and Out" Jet Hot® Cermaic Coating which typically reduces exterior temps by 60% extending engine component life and increasing horsepower and torque. Constructed entirely by hand in the USA with 1 3/4" primary tubes featuring 3” collectors followed by 2 stainless steel high flow catalytic converters staright through to the X-Pipe (direct fit to factory muffler section). Header Flanges are 3/8” thick CNC cut for a precision fit. Includes stainless band clamps and header bolts.        ALL THE FEATURES YOU WANT & NEED   100% Made in the USA Easy bolt on installation  Outstanding torque and HP gains Made in the USA Header primaries utilize mild carbon alumanized steel guaranteed to never crack     SF06R - Smooth Flow ceramic coated long tube headers with stainless steel high flow catalytic converter and x-pipe (direct fit to factory muffler section)
  • C6 Corvette MagnaFlow 16495 Street Series Cat Back Exhaust for 2009-2013 LS3 and 2006-2013 LS7

    C6 Corvette MagnaFlow 16495 Street Series Cat Back Exhaust for 2009-2013 LS3 and 2006-2013 LS7

    $1,566.30
    Free Shipping
    Made in the USA and engineered to last, for those seeking increased performance and better economy, MagnaFlow Street Series Performance Exhaust systems deliver the smooth deep sound you want and the wide-open performance power you need.      MagnaFlow's C6 Corvette Performance Exhaust systems are rugged, reliable, built to last, and their legendary straight-through, wide-open, stainless steel mufflers provide the smooth, deep tone they are famous for. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards.   These exhaust kits and cat-back systems feature mandrel bends to ensure there are no flow restrictions and OEM-style barbed hangers for easy installation. All of MagnaFlow's exhaust systems are factory-checked for proper fit and dyno-tested to verify performance gains. All necessary installation hardware is included and the entire system is backed by MagnaFlow's lifetime warranty.   Fits 2009-2013 LS3 and 2006-2013 LS7   Additional Information Tubing Outer Diameter: 3.0 in. System Type: Cat-Back Tip Outer Diameter: 4 in. Tip Quantity: 2 Single or Dual: Dual Exit Style: Split Rear Material: 100% Stainless Steel Made in the U.S.A. All Mandrel Bent Tubing 409 Stainless Steel Construction Lifetime Warranty
  • C6 Corvette  2009+ Exhaust Corsa Extreme

    C6 Corvette 2009+ Exhaust Corsa Extreme

    $1,447.00
    Free Shipping
    Corsa latest and most aggessive sounding exhaust to date for the 2009 and newer C6 Corvette.   CORSA Performance has done it again. They've taken their popular C6 Sport Exhaust and kicked it up a notch with the all new CORSA Xtreme. Always loved CORSA quality and craftsmanship, but wanted even more attitude and sound? Then this is your exhaust. Deeper tone at idle, yet louder outside under throttle, this system delivers their most aggressive sound yet, while still controlling the interior sound level. Like all CORSA Performance exhaust systems, the new CORSA Xtreme is constructed of 100% premium stainless steel and carries a limited lifetime warranty. Unlike the competition, there is no cheap packing material to wear down and cause the system to get louder with age. When you want the REAL sound of speed, you want CORSA Xtreme. Features * All 304L stainless steel construction, crafted with pride and precision in the USA. * Flow bench-tested 64% gain in exhaust flow vs. stock muffler. * No welding or cutting required; Bolt-on installation. * Includes hardware and detailed, full-color installation instructions. * 50-state emissions legal. * Limited lifetime warranty for as long as you own your C6. Available with 3.5" Pro Series Stainless Tips (#14470) THE CORSA DISTINCTION No Other Exhaust Manufacturer Delivers All Three: No Resonance/Drone - due to our patented Reflective Sound Cancellation (RSC) technology; your exhaust is whisper quiet at highway speeds. Increased Flow and Less Backpressure - resulting from a straight-through, nonrestrictive design. Great Performance Sound - we tune in the good sounds and cancel the bad, without the use of baffles or steel wool packing material.     POWER-PULSE RSC  REFLECTIVE SOUND-CANCELLATION MUFFLER TECHNOLOGY Now you can have the ultimate exhaust performance and sound for your Corvette, without the intrusive in-cabin resonance found in other aftermarket exhaust systems. CORSA Performance delivers The Best Sound Around™ with Power-Pulse RSC™ muffler technology, engineered to increase performance and eliminate annoying interior exhaust noise.     The Power-Pulse RSC muffler design features a pipe running straight through the muffler that incorporates a full 360-degree air gap that allows sound pressure waves to escape. The waves are channeled and then returned to the gap 180 degrees out of phase, cancelling specific sound frequencies. All that remains is the clean, crisp sound of V-8 performance.   CORSA Redefines Exhaust Technology      The exclusive, patented Power-Pulse RSC™ muffler design delivers the throaty exhaust tones that define your performance Corvette on the open road. But inside, you will experience the quiet ride, that until now, you've only dreamed about.      CORSA has now made it possible with RSC - Reflective Sound Cancellation technology - using aeronautical and space age noise-suppression technology. Sound waves are reflected within the muffler case, producing a cancellation wave effect - with no flow restriction and without electronic devices!  
  • C6 Corvette  Z06 Exhaust MagnaFlow CatBack

    C6 Corvette Z06 Exhaust MagnaFlow CatBack

    $1,343.02
    Free Shipping
    Wanna give your C6 Corvette Z06 a little more growl and performance? One of the easiest bolt on upgrades is to replace the Corvette Z06 Exhaust System with something more free flowing. You will see performance gains on the dyno and the sound will be music to your ears. The MagnaFlow C6 Corvette Z06 Performance Exhaust System is made with 100% mandrel bent stainless steel with beautiful 4" quad tips and a lifetime warranty. All Stainless Steel, Mandrel-Bent, Cat-Back Exhaust System With Polished Stainless Steel Tips Magnaflow Mufflers are the straight Wide Open performance muffler with smooth deep tones The Magnaflow muffler was developed to be a superior product line of performance mufflers. Wide Open performance Magnaflow mufflers outflow OEM chamber style mufflers by as much as 16%. This reduces engine heat and backpressure and improves exhaust scavenging from the combustion chamber The Magnaflow muffler minimizes the power robbing effects of the OEM system to restore torque and horsepower to the engine Free Shipping!!!!! Additional Information Material: 100% Stainless Steel Tubing O.D. Size: 3in. System Type: Cat-Back TIP O.D. Size: 4in. TIP Quantity: 2 Single/Dual: Dual Exit Position: Rear Exit Features and Benefits:  Lifetime Warranty, Dyno Tested And Proven To Make Power, Performance Gains In Horsepower And Torque, Great Sound -Has A Smooth; Deep Tone, Easy To Install, Mandrel-Bent. All Welded. Built To Last.  
  • C6 Corvette  Exhaust MagnaFlow C6 Complete System

    C6 Corvette Exhaust MagnaFlow C6 Complete System

    $1,941.88
    Free Shipping
    Upgrade your C6 Corvette exhaust with a MagnaFlow C6 Corvette Performance Exhaust System for the 2005-2008 C6 Corvette All Stainless Steel, Mandrel-Bent, Cat-Back Exhaust System With Polished Stainless Steel Tips Magnaflow Mufflers are the straight Wide Open performance muffler with smooth deep tones The Magnaflow muffler was developed to be a superior product line of performance mufflers. Wide Open performance Magnaflow mufflers outflow OEM chamber style mufflers by as much as 16%. This reduces engine heat and backpressure and improves exhaust scavenging from the combustion chamber The Magnaflow muffler minimizes the power robbing effects of the OEM system to restore torque and horsepower to the engine Free Shipping!!!!! The following systems are available Part #15884 - Complete System w/ Tru-X & cat-back, rear exit, 2.5" SS tubing, 4" rolled/slash/p-SS tips   Additional Information Material: 100% Stainless Steel Tubing O.D. Size: 2.5in. System Type: Cat-Back TIP O.D. Size: 4in. TIP Quantity: 4 Single/Dual: Dual Exit Position: Rear Exit Features and Benefits: Lifetime Warranty, Dyno Tested And Proven To Make Power, Performance Gains In Horsepower And Torque, Great Sound -Has A Smooth; Deep Tone, Easy To Install, Mandrel-Bent. All Welded. Built To Last.
  • C6 Corvette SLP Powerflo Exhaust System Round Tips 32003

    C6 Corvette SLP Powerflo Exhaust System Round Tips 32003

    $719.95
    Free Shipping
    An exhaust system to wake up your C6 Corvette! Bolt on a PowerFlo® Axle-Back Exhaust System from SLP on your 2009-2013 C6 Corvette/Grand Sport for gains up to 10 extra horsepower with a low, muscle car rumble. The tone is slightly louder then stock to let everyone know you're coming, but not loud what-so-ever so you can keep your Corvette civilized. Our engineers developed this system to sound great on the street and remove interior cabin resonance with the majority of the sound coming out the back of the vehicle. This system features four polished 3.5" dual split round tips, providing you with the ultimate Corvette look. The rest of the exhaust system is hand-crafted from 2.5" 304 stainless steel, including a fully polished muffler with a stamped SLP logo and is covered with our Limited Lifetime Warranty, and comes complete with detailed instructions. PowerFlo Axle-Back Exhaust System for C6 Corvette/Grand Sport Features: Limited Lifetime Warranty Hand-crafted from 304 stainless Easy bolt-on installation Polished 3.5" dual split round tips   SLP's initial claim to fame says it all: It was the first company in the performance aftermarket to develop and manufacture a 50-state emission-legal performance package -- specifically for V8 Camaros and Firebirds. True to its name ("Street Legal Performance"). Established in 1987, SLP has stood for quality performance enhancements for late-model American Muscle cars from the beginning, and it continues this commitment today.the vision of SLP's part program is to not just provide performance, but to do so with the best engineering practices and quality possible.     No discounts can be taken on SLP products. The price shown in our lowest price available
  • 2005-2008 C6 Corvette Kooks Jet Hot Coated 1 3/4" Headers

    2005-2008 C6 Corvette Kooks Jet Hot Coated 1 3/4" Headers

    $1,263.60
    Free Shipping
    Quality 409 stainless steel headers designed and manufactured by Kooks. These C6 Corvette 1 3/4" headers are finished off in a Jet Hot coating ceramic finish. The finish is polished for an impressive shine. Unlike most headers that fade or rust, these Jet Hot coated headers will hold their polish for many years, in fact Kooks backs the finish by a lifetime warranty! The X-pipe design will help give your C6 Corvette that modern, deep rumble you are looking to achieve. As with nearly all of Kooks headers products, these are a quick and easy bolt-on application to your Corvette. Did we mention these Kooks headers are not only design in the USA but also built in America? Application: 2005, 2005, 2006, 2007, 2008 C6 Corvette About Kooks Headers At Kooks they have been providing tube bending as well as forming and fabrication of bent tube assemblies, for over 50 years. As a leading provider of parts and assemblies for the aviation and transportation industries, they have developed services that add value to the manufacturing process. Fabrication abilities include tube bending, end forming, boring, grinding, brazing, and welding of a variety of materials. Tube ends can be flared, flattened, swaged, beaded, or formed with a Victaulic groove. Properly forming the ends of the tube is an essential part to ensuring optimal performance of the assembly. They are capable of fabricating assemblies from a variety of standard metals including steel, stainless steel, aluminum, and brass. Inspection and testing capabilities include CMM equipment. If additional finishing and fabrication work is needed, trusted outside sources can be contracted, further simplifying customers’ supply chain. In developing welding and brazing services for the automotive industry, at Kooks Industries, Inc., they put a focus on precision and versatility. We offer a wide variety of welding services including: gas tungsten, gas metal, as well as resistance spot welding. Torch brazing is performed in-house while both standard and vacuum brazing are available through an outside partner. For high-volume weldments, 6-axis robotic MIG welding is available. Various non-destructive testing and inspection can be performed in-house and by third party certified weld inspectors, according to applicable industry standards.
  • C6 Corvette MagnaFlow 15284 Street Cat-Back Exhaust for 2012 2013 LS3

    C6 Corvette MagnaFlow 15284 Street Cat-Back Exhaust for 2012 2013 LS3

    $1,389.76
    Free Shipping
      Made in the USA and engineered to last, for those seeking increased performance and better economy, MagnaFlow Street Series Performance Exhaust systems deliver the smooth deep sound you want and the wide-open performance power you need.   MagnaFlow's C6 Corvette Performance Exhaust systems are rugged, reliable, built to last, and their legendary straight-through, wide-open, stainless steel mufflers provide the smooth, deep tone they are famous for. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards.   These exhaust kits and cat-back systems feature mandrel bends to ensure there are no flow restrictions and OEM-style barbed hangers for easy installation. All of MagnaFlow's exhaust systems are factory-checked for proper fit and dyno-tested to verify performance gains. All necessary installation hardware is included and the entire system is backed by MagnaFlow's lifetime warranty.   Additional Information Tubing Outer Diameter: 2.5in. System Type: Cat-Back Tip Outer Diameter: 4 in. Tip Quantity: 4 Single or Dual: Dual Exit Style: Split Rear Product Name: Stainless Cat-Back System Performance Exhaust Material: 100% Stainless Steel Notes: 2.5in System, Cat-Back, Street Series, DUAL SPLIT rear exit, quad 4 inch exhaust tip Made in the U.S.A. All Mandrel Bent Tubing 409 Stainless Steel Construction Lifetime Warranty
  • C6 Corvette  Z06 Borla XR1 Long Tube Headers 17260

    C6 Corvette Z06 Borla XR1 Long Tube Headers 17260

    $1,338.99
    Free Shipping
    These powerful, efficient, high-flowing XR-1 Long Tube headers by Borla for the 2005-Present C6 Corvette with the 6.0L or 6.2L (LS2 or LS3) engine are one of the most fantastic and effective exhaust modification pieces on the market today. With a combination of high-powered straight-through and intelligent multi-core technology, these headers give fantastic performance increases across the RPM range in both HP and Torque beyond what just a Borla exhaust will give you, which is already a lot. With 2.75" Collectors and advanced X-Pipe technology, the bonuses to sound, tone, and performance are undeniable. This is a complete Corvette Headers system with the X-Pipe included. Designed for off-road Corvette use only, and may not be street legal in all 50 states. FREE SHIPPING IN THE CONTINENTAL 48 STATES!!!
  • C6 Corvette Mild to Wild Exhaust On Demand Switch

    C6 Corvette Mild to Wild Exhaust On Demand Switch

    $69.95
    Free Shipping
    Imagine having the ability to turn your C6 Corvette Z06, Grand Sport, ZR1, and NPP exhaust from MILD (exhaust ports closed) to WILD (exhaust ports open) using your OEM Homelink (found on your visor) or via the supplied remote. This revolutionary product lets you control your, 2006-Present Corvette Z06, ZR1, Grand Sport or NPP exhaust system on demand via a tiny wireless remote or the Homelink feature in your car . One of the coolest technologies on the new C6 Z06, ZR1, Grand Sport, and 2007+ NPP equiped Corvette is the “bi-mode” exhaust. Whisper quite up until 3500 RPM and then a wide open race car sound as the flaps located in the tips open. The problem is the inability to control this feature. Up until now, the owner’s only choice was to pull the fuse or to install wiring, drill a hole for a switch to turn the quiet mode off (and these sell for $85). After spending $75,000, the last thing I would want to do is start running wires and drilling holes. This patent pending product requires no drilling or running wires through your car. It’s a simple 5 min simple plug and play installation that anyone can do. Once installed, you will have full control over the exhaust mode, via a simple ON/OFF remote wireless controller or your Homelink transmitter (simple programming required, instructions provided. Please be aware that not all Corvettes use Homelink, some use Car2U. You will need to use the remotes if your car is equiped with Car2U). Once the Homelink is programmed, you can just use that to work your exhaust. You also will get two sleek ON/OFF wireless controls that can be mounted anywhere and will control the exhaust up to 50’ away. The “OFF” mode gives you that race car sound 100% of the time. The “ON” mode works as the stock setting and is quiet to preset OEM 3,500 RPM so the system will work just like the stock system . The switch can be used anytime the car is running, allowing you to show your friends what a cool exhaust you have as you can use the remote and open and close the flaps on demand. Baffles Open, Wild..... Baffles closed, Mild..... You will receive the professionally engineered plug and play wireless receiver, two miniature remotes (batteries included) and the necessary homelink programing instructions. Believe me you will be happy with the quality and fit of this Corvette exhaust controller. NOTE: this unit will work with either of the supplied remotes or the OEM visor mounted Homelink system. It will not work with other visor-mounted units. GM has been testing other visor units, so you may not have a Homelink system. If you have a visor unit with a single LED with the home symbol around it you have Homelink and this will work with the visor controls. If not, you will need to use the included remotes. Installation Instructions are Located Here
  • CORVETTE C6 Z06 EXHAUST BILLY BOAT B&B FUSION FCOR-0466

    C6 Corvette Z06 Exhaust Billy Boat B&B Fusion

    Regular Price: $1,999.00

    Special Price $1,700.99

    Free Shipping
    C6 Corvette Z06 and ZR1 Exhaust Billy Boat Fusion SystemPlease note: This item is sold at our rock bottom price, the best price in the world and we cannot discount further. The Billy Boat Corvette ZR1 and Z06 Fusion Exhaust takes the already awesome stock Z06-ZR1 exhaust design and improves it to a perfect blend of sound and power. Billy Boat is one of the few aftermarket performance exhaust providers that retains the mild to wild roar of the Z06-ZR1 dual mode exhaust. Your sill have butterfly valves in the B&B fusion system that you did with your stock system so you can continue to get the Jekyl to Hyde transformation of your Corvette. Did you know you stock Z06 exhaust is a 3" system that funnels down to 2.5" as it goes into the mufflers. This reduction in pipe size reduces flow and performance, limiting your Corvette Z06 from realizing its full potential. The B&B Fusion system is a full 3" system built with T-304 stainless steel. B&B uses only top quality materials with mandrel bends for maximum flow and performance. The system uses the PRT center muffler section for high exhaust flow and enhanced sound control, while the rear section is a 3" version of the B&B Bullet system, using an additional small resonated muffler at the back of the system. The muffler tips are double walled and can be ordered as 4" round or 4.5" oval. The exhaust system comes fully polished revealing an awesome look and roar that gives your Corvette Z06 the look and aggressive sound that it should have from the factory. All B&B products are precision built in rugged fixtures, completely TIG welded, and are a direct replacement for stock exhaust components and include all hardware and gaskets. No machining, no cutting and no welding means easy installation. We provide the perfect mix of performance, sound and style for the 2006 Corvette Z06. Each Billy Boat Performance Exhaust system is backed by a lifetime warranty against rust, corrosion or burn through and 2 full years against defects in materials or workmanship. Since 1989 Billy Boat Performance Exhaust has designed, tested, and manufactured the highest quality stainless steel exhaust systems available. Originally specializing in Porsche 911 performance exhaust systems, oil coolers, and intercoolers, B&B introduced the Tri-Flo line named after its unique 3-into-1 Porsche header. Today in its state-of-the-art facility, Billy Boat continues to develop the highest performing exhaust systems for most sports cars, trucks, and SUVs. With an in-house dyno facility and R&D staff, we stay on top of current vehicle trends and deliver products that fit and perform to an unsurpassed level of standards.  Shipping is Free is the lower 48 states!!! Southern Car Parts was the Sponsor of the Chad Boat #84 Toyota for the Chicago race back in 2013.... We've got a great business relationship with Billy Boat Exhaust and Southern Car Parts knows the B&B Product line better than anyone in the business. We stock many C5, C6 and C7 exhaust systems.
  • C6 Corvette  ZR1 and Z06 Akrapovic SS Slip-On Exhaust

    C6 Corvette ZR1 and Z06 Akrapovic SS Slip-On Exhaust

    $2,275.00
    Free Shipping
    Note-> In 2012 GM Changed the X pipe design on the Corvette. The Akrapvoic EVO System (comes with X pipe) will not fit on the 2012 Corvette. The Slip On (axle-back system without X pipe) will bolt up without issue. This is is the Axleback Slip on System and IS compatible with the 2012+ Corvette Z06 and ZR1. This Axle-Back Akrapovic Exhaust for the C6 Corvette provides unmatched exhaust benefits. Akrapovic has become world renowned for their extreme high-end exhaust products which deliver the very best performance and tonal benefits for every vehicle they're manufactured for. Designed with optimal engineering in mind and manufactured from the highest quality Stainless Steel materials, Akrapovic exhausts give you the top of the line exhaust benefits possible. Of course, with the very best quality comes a higher price, but Akrapovic always delivers to give the customer a quality comparable to what they pay for. With an Akrapovic exhaust every dollar spent goes in to giving the driver the ultimate top-end performance exhaust piece. Available with both Titanium and Carbon Fiber Exhaust Tips. The famous Z06, a high performance version of the actual Corvette, is at the same level with Super sports cars as Porsche GT2, Nissan GT-R, and Lamborghini Gallardo. The big 7.0 l engine, with huge power and gigantic torque, delivers an incredible performance, which will make finding an equal rival on the road really hard. With the Akrapovic aftermarket Slip-On exhaust system, made of titanium or stainless steel, optionally equipped with an exhaust valve remote control, the Z06 will now transform into a pure Beast. Additional HP and torque are a given but the sound will make you feel like you are racing the GT1 Corvette. The four huge 125 mm titanium or carbon fiber tail pipes offer a visual image of what is hiding under the car. The Akrapovic Slip-On exhaust system for Z06 was optimized in many ways to meet the requirements of our engineers. The EVO Cat-Back Exhaust system delivers additional power of 13.5 HP and additional torque of 28.2, from mid- to high rpm. The throttle response is much sharper now, which improves agility. However, the most significant change is the sound. Lovers of the pure V8 race engine sound must have an Akrapovic exhaust system. For those who want to take their first steps in tuning the Z06 the Slip-On system (rear mufflers and 4 titanium or carbon fiber tail pipes) is right exhaust.   Slip-On system: - titanium or stainless steel end mufflers - 4 titanium or carbon fiber tail pipes   Hard facts: - plus 13.5 HP (at 3.460 rpm) - plus 28.2 Nm (at 3.350 rpm)   This exhaust also offers full support for the Corvette Multi-Mode function. Actuators from the stock exhaust will need to be used with the Akrapovic exhaust, but this is an easily done switch. Once installed, the Akrapovic bi-modal functions will be comparable to the stock system, and will also function with Mild to Wild switches, and other bi-modal exhaust devices. Here are some additional pictures to temp you a little more. Below is the Stock exhaust (top of picture) compared to the Akrapovic system. Some Pictures of the Carbon Fiber tips (most popular tips selection) at diffferent angels. Stock Exhaust Compared to Akrapovic System (stock looks so inadequate :) )   During Instalation, before tips are installed   Here is a couple other items that are really popular with customers who purchase the Akrapovic Corvette exhaust. First is the Billy Boat C6 Corvette Z06 Headers. Headers are not needed at all with the Akrapovic exhaust and with everything OEM and the Akrapovic System you will still be emission friendly and will retain your Cats. If Headers are something you might want, checkout the Billy Boat Z06 Headers are the only Corvette Headers that allow you to use you the Akrpaovic X pipe or stock H pipe without any modiifications. You will lose your catalytic converters as they come off with the stock OEM Headers (all one piece). If you live in an area that does not mandate cats, the B&B headers are the perfect compliment to the Akrapovic system and they are on sale to help make the decision easy.     Another complimental item that goes with the tips of the Akrapovic Exhaust is the APR Carbon Fiber Rear Diffuser (see below). Really looks awesome with the Carbon or Titanium Akrapovic tips.  
  • C6 Corvette  "NPP Exhaust In a Box"

    C6 Corvette "NPP Exhaust In a Box"

    $199.99
    NPP in A Box will turn any C6 into a Bi-mode exhaust equipped car, you provide the mufflers, I provide the rest. Comes with selectable start up mode - lets you select if your Corvette starts loud or quiet. If you already have NPP (bi-mode) mufflers from the factory, just purchase Mild2Wild switch and you are good to go. If you do not have the factory installed NPP Exhaust system, get the mufflers and our "NPP in a Box kit" and you will have everything you need to convert your car for a fraction of what your local dealerhsip will charge you. Just install the NPP mufflers from GM add NPP IN A BOX and you will have a fully functional NPP system that will use our Mild2Wild Swtich (included). All the parts needed are provided to allow you to tap engine vacuum to operate you mufflers (just like the OEM system).  No special tools needed and average install is 30min, very simple. What makes our NPP in a BOX your only choice Very Low Operating Current = (less than 1/2 amp) generally systems like this take a few amps so NPP in a box will never / compromise your $80K car Ease Of Installation = A 15 minute simple install, 8 page color picture instructions Quality Of Components = Not only have I been working with the leaders in vacuum control, Each component (enclosure, components, wire and connectors) are the best you can use. All Parts Are Included except the Mufflers = All tubing, fittings, controllers are included. Comes with a 90 day warrantee (No refunds or returns on this item. If defective it will be replaced only) Installation Directions here....
  • C6 Corvette  Old School Mild to Wild Exhaust Control Switch

    C6 Corvette Old School Mild to Wild Exhaust Control Switch

    $49.99
    Free Shipping
    This Mild to Wild switch allows for a true Old School style left-foot control switch for your very new C6 Corvette NPP bi-modal exhaust system. Just as other exhaust control switches do, this dead pedal Mild to Wild allows for control over your exhaust's quiet and loud modes as dictated by the vacuum valves. However, instead of putting that control at your fingertip, this Old School Mild to Wild puts that control at your feet. It's fun and exciting, and really makes for a great "Wow" factor to just tap your foot and change your exhaust from quiet to loud. Installs in minutes: simply remove the OEM dead pedal (very easy, 2 nuts) and install this one.  The special flat wire harness simply passes from the driver side to the passenger side and you then simply plug in the adapter into the fuse block.  No ground wire to install.          Zero drain, starts in the last setting you left it.  No fob, no wireless, no visor.  The heavy duty switch is in simple reach, press loud, press quite, how simple.  You can even switch it prior to starting the car.     Perfect for all C6 Z06, ZR1, and NPP Equipped Corvettes.
  • CORVETTE C6 B&B BILLY BOAT PRT EXHAUST SYSTEM FCOR-0425

    C6 Corvette B&B Billy Boat PRT Exhaust System FCOR-0425

    Regular Price: $1,232.50

    Special Price $1,159.00

    Free Shipping
    Please note: This item is sold at our rock bottom price, the best price in the world and we cannot discount further. The new B&B PRT system provides a powerful, aggressive, exhaust tone that's also appreciable and tame at lower, cruising RPMs. Designed to offer the best in HP and Torque gains across the RPM range, and coupled with the Billy Boat Purge Resonance Technology for minimal cabin drone, this system provides all of the benefits of the well-respected Billy Boat Bullet system, in a slightly less tonally aggressive package. A great exhaust for either the performance junkie with the garage queen, or the man who makes his C6 Corvette his daily driver. Tips are available with your choice of polished Stainless Steel tips--which are finished to a gorgeous mirror like shine--, and new Black Satin Ceramic Coated Exhaust tips--for a more unique and aggressive modified appearance. Southern Car Parts was the Sponsor of the Chad Boat #84 Toyota for the Chicago race back in 2013.... We've got a great business relationship with Billy Boat Exhaust and Southern Car Parts knows the B&B Product line better than anyone in the business. We stock many C5, C6 and C7 exhaust systems.
  • CORVETTE C6 EXHAUST BILLY BOAT B&B BULLET FCOR-0415 FCOR-0410

    C6 Corvette Exhaust Billy Boat B&B Bullet FCOR-0415

    $958.51
    Free Shipping
    Please note: This item is sold at our rock bottom price, the best price in the world and we cannot discount further.The Bullet is available with Round Tips and Oval Tips. Please make your selection:FCOR-0415 Round TipsFCOR-0410 Oval Tips The Billy Boat C6 Corvette Bullet is the most aggressive sounding performance exhaust system to be releasedfrom B&B and has quickly become the industry standard for a deep, aggressive muscle car sound. Your C6 Corvette can see performance gains of up to 18 rear wheel horse power and 17 foot pounds of torque from the Bullet. A direct bolt on exhaust system, you can easily replace your stock exhaust system, adding HP and making your C6 sound much more aggresive. Contructed of 100% T-304 Stainless steel and the peace of mind of a lifetime warranty, you cannot go wrong with a Billy Boat exhaust for your C6 Corvette .     Available with Quad Oval 4.5" or Quad Round 4" Tips. Since 1989 Billy Boat Performance Exhaust has designed, tested, and manufactured the highest quality stainless steel exhaust systems available. Originally specializing in Porsche 911 performance exhaust systems, oil coolers, and intercoolers, B&B introduced the Tri-Flo line named after its unique 3-into-1 Porsche header. Today in its state-of-the-art facility, Billy Boat continues to develop the highest performing exhaust systems for most sports cars, trucks, and SUVs. With an in-house dyno facility and R&D staff, we stay on top of current vehicle trends and deliver products that fit and perform to an unsurpassed level of standards. Tips are available with your choice of polished Stainless Steel tips--which are finished to a gorgeous mirror like shine--, and new Black Satin Ceramic Coated Exhaust tips--for a more unique and aggressive modified appearance. See the installation below... Southern Car Parts was the Sponsor of the Chad Boat #84 Toyota for the Chicago race back in 2013.... We've got a great business relationship with Billy Boat Exhaust and Southern Car Parts knows the B&B Product line better than anyone in the business. We stock many C5, C6 and C7 exhaust systems.
  • C6 Corvette  Z06 Exhaust Bypass Switch

    C6 Corvette Z06 Exhaust Bypass Switch

    $99.99
    Here is another creative C6 Corvette Exhaust switch for the Z06. Very simple plug and play solution without the need for remotes, car2u, or homelink. Very simple installation that give you an OEM appearance when does and complete control over you exhaust butterfly valves. Comes complete with the wiring harness, face plate and switch already attached to the face plate. Our new Corvette Z06 exhaust switch plugs right into the exhaust bypass module for a true plug and play installation. You can order it with or without the faceplate (we use the OEM faceplate the is right in front of where your console lid is. Please note the faceplate only is compatible with 2006-2007 Z06's. In 2008 the interior changed so you will need to order without the faceplate and mount the switch somewhere else. Installation takes 10 minutes...Instructions are shown below... I N S T A L L A T I O N   I N S T R U C T I O N S 102157 Exhaust Valve Bypass Switch – C6 Corvette Z06 This kit is designed to permit instant manual bypass of the two exhaust valve butterfly valves present in the Z06 muffler,giving the driver full control of maximum exhaust flow. The 102157 is a Plug-And-Play design which should take the average person around 20 minutes to install. (NOTE: Kit is also available WITHOUT switch plate, Part Number 102158 intended for those who want to mount the switch in an alternate spot). There are no wires to cut, and no electrical skills are necessary to install this system, which comes with the console cover plate to replace your OEM part. The switch used has a small logo identifying four exhaust ports. When the switch is pressed to the position of the white dot, the exhaust butterfly valves open and remain on manual override until the switch is returned to the normal position.     To Install: Start at the rear of the car at the battery box located inside on the right rear. Remove the battery box cover to expose the battery. Using a 10mm socket wrench, loosen the battery hold-down bracket and slide the battery to the left to access the right side of the compartment. You will see the Bypass Module located on the right side, secured by a strip of body adhesive. Simply grasp the box and pull it out of the compartment, revealing the two connectors. You will then disconnect the smaller of the two connectors (the one with the single wire) by depressing the lock tab and pulling it out of its mating connector in the module. See the illustrations below for details. Run the harness from the rear forward, tucking the harness under the carpeted panels along the right side to hide the wires. Follow the upper edge of the panels to the corner where the gas shock is located, then behind the shock mount to the carpeting panel behind the passenger seat. Tuck the harness behind this panel, again hiding the wire. Route the harness over to the drivers’ side of the console and tuck the harness under the edge of the console, routing the end of the harness up to the section of the console where the plate is located. Grasp the lower edge of the plate and pull upward, removing the plate from the console. Fish the wire terminals to that location (notice the sound-deadening foam under the plate). See illustrations below for details. Once the plate is snapped into place, re-insert the module and slide the battery back to its original place. Tighten the hold-down clamp.
  • C6 Corvette  Exhaust Billy Boat B&B Fusion Complete Kit

    C6 Corvette Exhaust Billy Boat B&B Fusion Complete Kit

    Regular Price: $1,799.99

    Special Price $1,619.99

    Free Shipping
    This is the Fusion complete NPP kit for Corvette's without the factory NPP option This is the Billy Boat C6 Fusion exhaust Quad 4" Tips for the C6 Corvette 2005-2008 without the NPP factory Option. The Billy Boat Fusion comes with everything you need (including the Mild to Wild Z06 Exhaust Switch) to give your Corvette multimode exhaust!   What is bi-modal exhaust? The Fusion is a bimodal exhaust system, meaning it has two passages, or modes, that the exhaust can travel through the muffler.  Each of the mufflers has two outlets, with one side having a butterfly type valve which allows the exhaust flow to be shut off, regulating which side of the muffler the flows exhaust. One side of the muffler is the "quiet" side, and one side is the "loud" side.  The "quiet" side is a smaller, muffled and chambered tube, while the "loud" side is 3" tubing straight through.    How loud is it? Through our development and customer feedback we have shortend the muffler for 2008, making the loud side of the muffler louder, which results in a tone similar to the famous Bullet system.  In the closed position the tone would be slightly louder than the standard Route 66 system. What controls the valves? The butterfly is controlled by a vacuum valvem, which we built and developed completely in house.  On the Z06 and the 2008 C6 with the NPP option, this valve is controlled by the ECU.  The valve opens based on RPM and throttle position.  The problem is the factory exhaust is very quiet, even with the valve open. Our expertise at Billy Boat is getting the tone right for your Corvette, and they think they have nailed this one.  Even in the closed position, the tone is deeper, louder, and more aggressive.  Open the valves,  the overall volume and tone increases to the point heads will turn when you drive up. What if I have a standard C6? This is a complete plug and play kit that is meant to be used on the standard C6 without the factory installed Mulitmode Option. We have used the engine as the vacuum source (it is the same port the factory uses for the NPP) and the installation is simple and straight forward. Is the system 2 1/2" or 3"? On the Corvette Z06 and ZR1 the Z06 BB Fusion System exhaust system is 3", while on the C6 it is 2 1/2". Will they bolt up to my stock H pipe or my stock headers? Each part of the system will fit to a stock H-pipe or the stock headers.  The parts can be mixed and matched (rear exhaust, xpipe, and long tube headers) . Billy Boat has combined the best of the Bullet exhaust with the best new technology to give you the Fusion System for your Corvette. The muffler tips are double walled, 4" round or 4.5" oval. The entire system comes completely polished and the result is a truly spectacular look and sound that gives this high performance sports car the look and aggressive sound which will have heads turning everywhere you go. All BB products are precision built in rugged fixtures, completely TIG welded, and are a direct replacement for stock exhaust components and include all hardware and gaskets. No machining, no cutting and no welding means easy installation. We provide the perfect mix of performance, sound and style your Corvette . Each Billy Boat Performance Exhaust system is backed by a lifetime warranty against rust, corrosion or burn through and 2 full years against defects in materials or workmanship. Tips are available with your choice of polished Stainless Steel tips which are finished to a gorgeous mirror like shine or new Black Satin Ceramic Coated Exhaust tips-for a more unique and aggressive modified appearance. Tips are available as Round or Oval (Oval shown below, round tips displayed in previous images. Southern Car Parts was the Sponsor of the Chad Boat #84 Toyota for the Chicago race back in 2013.... We've got a great business relationship with Billy Boat Exhaust and Southern Car Parts knows the B&B Product line better than anyone in the business. We stock many C5, C6 and C7 exhaust systems.
  • CORVETTE C6 EXHAUST BILLY BOAT B&B BULLET FCOR-0515

    C6 Corvette Exhaust Billy Boat B&B Bullet FCOR-0515

    $958.51
    Free Shipping
    The Bullet is available with Round Tips and Oval Tips. Please make your selection:Please note: This item is sold at our rock bottom price, the best price in the world and we cannot discount further.FCOR-0515 Round TipsFCOR-0510 Oval Tips The Billy Boat C6 Corvette Bullet is the most aggressive sounding performance exhaust system to be released from B&B and has quickly become the industry standard for a deep, aggressive muscle car sound. Your C6 Corvette can see performance gains of up to 18 rear wheel horse power and 17 foot pounds of torque from the Bullet. A direct bolt on exhaust system, you can easily replace your stock exhaust system, adding HP and making your C6 sound much more aggresive. Constructed of 100% T-304 Stainless steel and the peace of mind of a lifetime warranty, you cannot go wrong with a Billy Boat exhaust for your C6 Corvette .     Available with Quad Oval 4.5" or Quad Round 4" Tips. Since 1989 Billy Boat Performance Exhaust has designed, tested, and manufactured the highest quality stainless steel exhaust systems available. Originally specializing in Porsche 911 performance exhaust systems, oil coolers, and intercoolers, B&B introduced the Tri-Flo line named after its unique 3-into-1 Porsche header. Today in its state-of-the-art facility, Billy Boat continues to develop the highest performing exhaust systems for most sports cars, trucks, and SUVs. With an in-house dyno facility and R&D staff, we stay on top of current vehicle trends and deliver products that fit and perform to an unsurpassed level of standards. Tips are available with your choice of polished Stainless Steel tips--which are finished to a gorgeous mirror like shine--, and new Black Satin Ceramic Coated Exhaust tips--for a more unique and aggressive modified appearance. See the installation below...      FCOR-0510 Quad Oval Pictured Above Southern Car Parts was the Sponsor of the Chad Boat #84 Toyota for the Chicago race back in 2013.... We've got a great business relationship with Billy Boat Exhaust and Southern Car Parts knows the B&B Product line better than anyone in the business. We stock many C5, C6 and C7 exhaust systems.
  • C6 Corvette  B&B PRT Exhaust System (09+) FCOR-0525

    C6 Corvette B&B PRT Exhaust System (09+) FCOR-0525

    Regular Price: $1,232.50

    Special Price $1,155.00

    Free Shipping
    The new B&B PRT system provides a powerful, aggressive, exhaust tone that's also appreciable and tame at lower, cruising RPMs. Designed to offer the best in HP and Torque gains across the RPM range, and coupled with the Billy Boat Purge Resonance Technology for minimal cabin drone, this system provides all of the benefits of the well-respected Billy Boat Bullet system, in a slightly less tonally aggressive package. A great exhaust for either the performance junkie with the garage queen, or the man who makes his C6 Corvette his daily driver. This exhaust system is available with either Quad Round or Quad Oval exhaust tips. Tips are available with your choice of polished Stainless Steel tips--which are finished to a gorgeous mirror like shine--, and new Black Satin Ceramic Coated Exhaust tips--for a more unique and aggressive modified appearance. Southern Car Parts was the Sponsor of the Chad Boat #84 Toyota for the Chicago race back in 2013.... We've got a great business relationship with Billy Boat Exhaust and Southern Car Parts knows the B&B Product line better than anyone in the business. We stock many C5, C6 and C7 exhaust systems.
  • CORVETTE C6 Z06-ZR1 EXHAUST BILLY BOAT B&B BULLET FCOR-0465

    C6 Corvette Z06-ZR1 Exhaust Billy Boat B&B Bullet

    Regular Price: $1,539.99

    Special Price $1,230.32

    Free Shipping
    Please note: This item is sold at our rock bottom price, the best price in the world and we cannot discount further. The new Corvette Z06-ZR1 exhaust is 3" from the factory, yet it necks down to 2.5" as it enters the mufflers, reducing exhaust flow and performance. The Billy Boat Bullet System is an entirely 3 inch, T-304 stainless steel system, using precision mandrel bends for uninterrupted flow and performance. The system uses a rear similar to a 3" version of the B&B Bullet system, using an additional small resonated muffler at the back of the system. The muffler tips are double walled, 4" round or 4.5" oval. The entire system comes completely polished and the result is a truly spectacular look and sound that gives your high performance Corvette the look and aggressive sound which will have heads turning everywhere you go. All B&B products are precision built in rugged fixtures, completely TIG welded, and are a direct replacement for stock exhaust components and include all hardware and gaskets. No machining, no cutting and no welding means easy installation. We provide the perfect mix of performance, sound and style for the 2006 Corvette Z06. Each Billy Boat Performance Exhaust system is backed by a lifetime warranty against rust, corrosion or burn through and 2 full years against defects in materials or workmanship. Wanna see an installation?   Since 1989 Billy Boat Performance Exhaust has designed, tested, and manufactured the highest quality stainless steel exhaust systems available. Originally specializing in Porsche 911 performance exhaust systems, oil coolers, and intercoolers, B&B introduced the Tri-Flo line named after its unique 3-into-1 Porsche header. Today in its state-of-the-art facility, Billy Boat continues to develop the highest performing exhaust systems for most sports cars, trucks, and SUVs. With an in-house dyno facility and R&D staff, we stay on top of current vehicle trends and deliver products that fit and perform to an unsurpassed level of standards. Southern Car Parts was the Sponsor of the Chad Boat #84 Toyota for the Chicago race back in 2013.... We've got a great business relationship with Billy Boat Exhaust and Southern Car Parts knows the B&B Product line better than anyone in the business. We stock many C5, C6 and C7 exhaust systems.
  • C6 Corvette  Kooks Long Tube Headers

    C6 Corvette Kooks Long Tube Headers

    $1,878.88
    Free Shipping
    3" Collector, choice of 1 3/4" and 1 7/8" Primaries Kooks headers and X pipe are designed to be combined with or without the factory exhaust. You can add Headers and the Kooks X pipe and retain the rest of your OEM exhaust system or you can mix and match with other exhaust systems as long as they are compatible with the OEM system. For instance, you can use Kooks Headers and X Pipe on your C6 LS2 Engine, and have a Borla Axleback exhaust. All Kooks products are designed to be compatible with the OEM system. You must always use the Kooks X pipe and Kooks headers to keep everything aligned back to the catback system or OEM system. As long as you use Kooks Headers and the X pipe, everything will bolt right up just as it would with the OEM system. The 1 3/4" primaries are the standard header application for the C6 Corvette. Highly modified Corvettes only should use the 1 7/8" headers. The 1 7/8" headers will not function properly with stock or close to stock Corvettes. For extremely modified, high-boost, forced induction Corvettes, the 2" primaries can be used. Note, however, the 2" headers are not recommended for Corvettes below the most intense, track-only applications. 2" header primaries will cause issues with blowback and throwing of codes on lesser modified Corvettes. Please understand that you need the Kooks X Pipe if you are going to put headers on your car. The Kooks X pipe accommodates for the change in downpipe length so that once you get to the end of the Kooks X pipe you can connect any aftermarket or OEM system to the Kooks X-pipe and it will align exactly where the factory H pipe would be. Unless you are using a special application, you will need the X pipe.   Why buy Kooks? - Kooks puts in over 45+ years of race winning experience into each header system they produce. - All Kooks Stainless Steel Systems come with a Lifetime Warrantee. - Kook Headers yield the largest gain in horsepower out of any other header company.  - Flanges are 3/8" thick and are made from 304 grade Stainless Steel. - Ball and Socket construction leaves a leak free seal between headers and x-pipes. - Kooks offer large diameter headers for high horsepower applications. - Kooks utilizes a scavenger spike (patent pending) in each of their collectors.  These spikes increase the velocity of the exhaust and causes a vacuum effect for the exhaust gases to exit the cylinder heads, thus creating a large increase in power. The Kooks Header system comes with everything you need to complete the installation, all gaskets, bolts, and O2 Sensors extenders (if needed) are included. When it comes to headers and exhaust systems, Kooks is an industry standard. Kooks Custom Headers has been building headers since 1962, when George Kook Sr. used his gas torch to build his first set of headers for the family race car. Being heavily involved in racing, his talents did not go unnoticed by all the local competition he would beat on the strip. With the help of George Kook Jr. President of Kooks Custom headers, Kooks has grown to a full fledge manufacturing facility in which hundreds of thousands of headers and exhaust systems are sold each year. Kooks Products. You also have choice of catted or non-catted x-pipe. The catted x-pipe comes with Kooks' housemade, high performance, high-flow cats installed. These cats will provide peak performance with 50 state legal application. Non-catted x-pipes are not legal in many states and are designed for off-road use only as result of this. For track specific applications, the non-catted x-pipe is ideal.   Please be sure to select your desired Kooks system from the drop down menus below so that we can assure to get you the header system you need.
  • C6 Corvette  Exhaust Billy Boat B&B Fusion Complete Kit 09+

    C6 Corvette Exhaust Billy Boat B&B Fusion Complete Kit 09+

    Regular Price: $1,799.99

    Special Price $1,619.99

    Free Shipping
    This is the B&B C6 Fusion (complete Multi Mode Exhaust Kit) Quad Round 4" or 4.5" Oval Tips for the C6 Corvette 2009+ without the NPP Option. Comes with everything you need (including the Mild to Wild Z06 Exhaust Swtich) to give your Corvette multimode exhaust !   .   What is bi-modal exhaust? The Fusion is a bi-modal exhaust system, meaning it has two passages, or modes, that the exhaust can travel through the muffler.  Each of the mufflers has two outlets, with one side having a butterfly type valve which allows the exhaust flow to be shut off, regulating which side of the muffler the flows exhaust.  One side of the muffler is the "quiet" side, and one side is the "loud" side.  The "quiet" side is a smaller, muffled and chambered tube, while the "loud" side is 3" tubing straight through.    How loud is it? Through our development and customer feedback we have shortend the muffler for 2008, making the “loud” side of the muffler louder, which results in a tone similar to the famous Bullet system.  In the closed position the tone would be slightly louder than the standard Route 66 system. What controls the valves? The butterfly is controlled by a vacuum valve, which we built and developed completely in house.  On the Z06 and the 2008 C6 with the NPP option, this valve is controlled by the ECU.  The valve opens based on RPM and throttle position.  The problem is the factory exhaust is very quiet, even with the valve open.  Our expertise here at B&B is getting the tone right for your Corvette, and we think we nailed this one.  Even in the closed position, the tone is deeper, louder, and more aggressive.  Open the valves,  the overall volume and tone increases to the point heads will turn when you drive up. What if I have a standard C6? This is a complete plug and play kit that is meant to be used on the standard C6 without the factory installed Mulitmode Option. We have used the engine as the vacuum source (it is the same port the factory uses for the NPP) and the installation is simple and straight forward. Is the system 2 1/2" or 3"? On the Corvette Z06 the Z06 BB Fusion System exhaust system is 3", while on the C6 it is 2 1/2". Will they bolt up to my stock H pipe or my stock headers? Each part of the system will fit to a stock H-pipe or the stock headers.  The parts can be mixed and matched (rear exhaust, x-pipe, and long tube headers) . Billy Boat has combined the best of the Bullet exhaust with the best new technology to give you the Fusion System for your Corvette. The muffler tips are double walled, 4" round or 4.5" oval. The entire system comes completely polished and the result is a truly spectacular look and sound that gives this high performance sports car the look and aggressive sound which will have heads turning everywhere you go. Tips are available with your choice of polished Stainless Steel tips--which are finished to a gorgeous mirror like shine--, and new Black Satin Ceramic Coated Exhaust tips--for a more unique and aggressive modified appearance. All B&B products are precision built in rugged fixtures, completely TIG welded, and are a direct replacement for stock exhaust components and include all hardware and gaskets. No machining, no cutting and no welding means easy installation. We provide the perfect mix of performance, sound and style your Corvette . Each Billy Boat Performance Exhaust system is backed by a lifetime warranty against rust, corrosion or burn through and 2 full years against defects in materials or workmanship. Complete installation video below   Southern Car Parts was the Sponsor of the Chad Boat #84 Toyota for the Chicago race back in 2013.... We've got a great business relationship with Billy Boat Exhaust and Southern Car Parts knows the B&B Product line better than anyone in the business. We stock many C5, C6 and C7 exhaust systems.
  • C6 Corvette  Mild 2 Wild Mild2Wild Exhaust Controller

    C6 Corvette Mild 2 Wild Mild2Wild Exhaust Controller

    $69.95
    Free Shipping
    Imagine having the ability to turn your C6 Corvette Z06, Grand Sport, ZR1, and NPP exhaust from MILD (exhaust ports closed) to WILD (exhaust ports open) using you OEM Homelink (found on your visor) or via the supplied remote. Now you can with this Mild2Wild exhaust controller. This revolutionary product lets you control your, 2006-Present Corvette Z06, ZR1, Grand Sport or NPP exhaust system on demand via a tiny wireless remote, "the Mild2Wild Exhaust Controller" or the Homelink feature in your car . One of the coolest technologies on the new C6 Z06, ZR1, Grand Sport, and 2007+ NPP equiped Corvette is the “bi-mode” exhaust. Whisper quite up until 3500 RPM and then a wide open race car sound as the flaps located in the tips open. The problem is the inability to control this feature. Up until now, the owner’s only choice was to pull the fuse or to install wiring, drill a hole for a switch to turn the quiet mode off (and these sell for $85). After spending $75,000, the last thing I would want to do is start running wires and drilling holes. This patent pending product requires no drilling or running wires through your car. It’s a simple 5 min simple plug and play installation that anyone can do. Once installed, you will have full control over the exhaust mode, via a simple ON/OFF remote wireless controller or your Homelink transmitter (simple programming required, instructions provided. Please be aware that not all Corvettes use Homelink, some use Car2U. You will need to use the remotes if your car is equiped with Car2U). Once the Homelink is programmed, you can just use that to work your exhaust. You also will get two sleek ON/OFF wireless controls that can be mounted anywhere and will control the exhaust up to 50’ away. The “OFF” mode gives you that race car sound 100% of the time. The “ON” mode works as the stock setting and is quiet to preset OEM 3,500 RPM so the system will work just like the stock system . The switch can be used anytime the car is running, allowing you to show your friends what a cool exhaust you have as you can use the remote and open and close the flaps on demand. Baffles Open, Wild..... Baffles closed, Mild..... You will receive the professionally engineered plug and play wireless receiver, two miniature remotes (batteries included) and the necessary homelink programing instructions. Believe me you will be happy with the quality and fit of this Corvette exhaust controller. NOTE: this unit will work with either of the supplied remotes or the OEM visor mounted Homelink system. It will not work with other visor-mounted units. GM has been testing other visor units, so you may not have a Homelink system. If you have a visor unit with a single LED with the home symbol around it you have Homelink and this will work with the visor controls. If not, you will need to use the included remotes. Installation Instructions are Located Here
  • C6 Corvette MagnaFlow 16839 Competition Cat Back Exhaust for LS3 and LS7

    C6 Corvette MagnaFlow 16839 Competition Cat Back Exhaust for LS3 and LS7

    $1,383.30
    Free Shipping
      The MagnaFlow Race Series Exhaust Systems are designed for the ultimate in high performance and the loudest most aggressive racecar sound possible. Race Series exhaust systems remove the restrictive OEM muffler to virtually eliminate backpressure and maximize exhaust flow. The Race Series is recommended for those seeking maximum performance, reduced mass, and a loud aggressive racecar exhaust tone that demands attention.  MagnaFlow's C6 Corvette Performance Exhaust systems are rugged, reliable, built to last, and their legendary straight-through, wide-open, stainless steel mufflers provide the smooth, deep tone they are famous for. These systems are an engineered balance of interior and exterior noise levels and are tested against SAE j1169 standards.   These exhaust kits and cat-back systems feature mandrel bends to ensure there are no flow restrictions and OEM-style barbed hangers for easy installation. All of MagnaFlow's exhaust systems are factory-checked for proper fit and dyno-tested to verify performance gains. All necessary installation hardware is included and the entire system is backed by MagnaFlow's lifetime warranty.   Fits 2006-2013 7.0 Liter LS7 and 2010-2013 6.2 Liter LS3   Additional Information Tubing Outer Diameter: 3.0 in. System Type: Cat-Back Tip Outer Diameter: 4 in. Tip Quantity: 4 Single or Dual: Dual Exit Style: Split Rear Material: 100% Stainless Steel Made in the U.S.A. All Mandrel Bent Tubing 409 Stainless Steel Construction Lifetime Warranty
  • C6 Corvette  Borla ATAK Exhaust with X-Pipe 140453

    C6 Corvette Borla ATAK Exhaust with X-Pipe 140453

    $1,799.99
    Free Shipping
    This is the brand new C6 Corvette Borla ATAK Exhaust.....The Borla ATAK system is considered the most aggressive of C6 Corvette Borla systems, with a raspy deep throaty muscle car sound. ATAK, which stands of Acoustically Tunes Applied Kinetics is Borla's latest muffler design that is aimed for the Corvette High Performance Purists. Notice: This Exhaust system will not fit 2009+ C6 Corvettes. Designed to fit the 2005-2008 C6 Corvettes (Non Z06). BORLA has announced the development of a revolutionary new exhaust technology that enables their engineers to deliver unprecedented vehicle-specific control over the acoustical note of an exhaust throughout the RPM range, while retaining 100% of the power adding capabilities of BORLA’s patented Multicore design.         Called ATAK (Acoustically-Tuned Applied Kinetics), this exclusive technology (U.S. patent #5,248,859) produces the highest available dB (decibel) levels in the BORLA street-legal lineup, and is designed for high-performance purists who prefer exhaust notes over their stereos.   The focus of ATAK is to pump the volume while retaining clarity of sound, at the same time avoiding the drone and distortion typically found in louder exhausts. With ATAK, the sound output is tuned like a graphic equalizer to shape and focus sound waves for optimum high-volume output.   The development of each ATAK system begins with extensive study of each vehicle’s acoustical properties. The technology is based on custom-tuned attributes of the internal muffler cores, which are calibrated on a vehicle-by-vehicle basis to deliver the most desirable sound.   BORLA is now shipping Cat-Back and-or Rear Section ATAK exhaust systems for a wide variety of popular applications such as Mustang (including 2011 GT V6), Camaro, Corvette, Challenger, GTR, and more in development. This ATAK system has been specifically tuned for the '05-'08 C6 Corvette .   Like all BORLA exhaust products, each system is handmade in the USA by master craftspeople and features premium 300-Series austenitic stainless steel construction, mandrel bending by computer-controlled CNC machinery to ensure maximum flow and a perfect fit, mirror-polished tips, and a Million-Mile Warranty.         BORLA Cat-Back exhausts feature patented, straight-through and multi-core technology to unleash hidden horsepower. Increased exhaust velocity adds power, driving excitement, fuel economy and the distinctive BORLA Sound of Power respected by motoring enthusiasts everywhere. Each system is built from premium austenitic stainless steel, superior to T-400 series knockoffs, to give you the absolute best in performance and durability. Ultra-smooth mandrel bends ensure maximum flow and power, and precision computer-controlled CNC manufacturing ensures an accurate fit. Best of all, BORLA stands behind every system with a Million-Mile Warranty. Just what you'd expect from the world's most experienced (and most winning) exhaust brand.        
  • C6 Corvette  ZR1 and Z06 Akrapovic SS EVO Exhaust

    C6 Corvette ZR1 and Z06 Akrapovic SS EVO Exhaust

    $3,168.00
    Free Shipping
    Note-> In 2012 GM Changed the X pipe design on the Corvette. The Akrapvoic EVO System (comes with X pipe) will NOT fit on the 2012 Corvette. The Akrapovic Corvette Slip On (axle-back system without X pipe) will bolt up without issue. This is is the EVO System and IS NOT compatible with the 2012+ Corvette Z06 and ZR1. All the same engineering qualities that make Akrapovic famous but with a little lower price point because of the Stainless Steel instead of Titanium. The Akrapovic Catback Stainless Exhaust for the C6 Corvette Z06 or ZR1 provides unmatched exhaust benefits. Akrapovic has become world renowned for their extreme high-end exhaust products which deliver the very best performance and tonal benefits for every vehicle they're manufactured for. Designed with optimal engineering in mind and manufactured from the highest quality Stainless Steel materials, Akrapovic exhausts give you the top of the line exhaust benefits possible. Of course, with the very best quality comes a little higher price, but Akrapovic always delivers to give the customer a quality comparable to what they pay for. With an Akrapovic exhaust every dollar spent goes in to giving the driver the ultimate in top-end performance exhaust systems. Available with both Titanium and Carbon Fiber Exhaust Tips. The famous Z06, a high performance version of the actual Corvette, is at the same level with Super sports cars as Porsche GT2, Nissan GT-R, and Lamborghini Gallardo. The big 7.0 l engine, with huge power and gigantic torque, delivers an incredible performance, which will make finding an equal rival on the road really hard. With the Akrapovic aftermarket Slip-On exhaust system, made of titanium or stainless steel, optionally equipped with an exhaust valve remote control, the Z06 will now transform into a pure Beast. Additional HP and torque are a given but the sound will make you feel like you are racing the GT1 Corvette. The four huge 125 mm titanium or carbon fiber tail pipes offer a visual image of what is hiding under the car. The Akrapovic EVO exhaust system for Z06 - ZR1 was optimized in many ways to meet the requirements of our engineers. The EVO Cat-Back Exhaust system delivers additional power of 13.5 HP and additional torque of 28.2, from mid- to high rpm. The throttle response is much sharper now, which improves agility. However, the most significant change is the sound. Lovers of the pure V8 race engine sound must have an Akrapovic exhaust system. For those who want to take their first steps in tuning the Z06 the Slip-On system (rear mufflers and 4 titanium or carbon fiber tail pipes) is right exhaust. The EVO systems is a complete Catback system from the Catalytic Converters back (leaves the Cats in place).   EVO system includes: - stainless steel end mufflers - 4 titanium or carbon fiber tail pipes - Complete Connection and X pipe to the Catalytic Converters   Hard facts: - plus 13.5 HP (at 3.460 rpm) - plus 28.2 Nm (at 3.350 rpm)   This exhaust also offers full support for the Corvette Multi-Mode function. Actuators from the stock exhaust will need to be used with the Akrapovic exhaust, but this is an easily done switch. Once installed, the Akrapovic bi-modal functions will be comparable to the stock system, and will also function with Mild to Wild switches, and other bi-modal exhaust devices.     Here are some additional pictures to temp you a little more. Below is the Stock exhaust (top of picture) compared to the Akrapovic system. Some Pictures of the Carbon Fiber tips (most popular tips selection) at diffferent angels. Stock Exhaust Compared to Akrapovic System (stock looks so inadequate :) )   During Installation, before tips are installed   Installation instructions located here Here is a couple other items that are really popular with customers who purchase the Akrapovic Corvette exhaust. First is the Billy Boat C6 Corvette Z06 Headers. Headers are not needed at all with the Akrapovic exhaust and with everything OEM and the Akrapovic System you will still be emission friendly and will retain your Cats. If Headers are something you might want, checkout the Billy Boat Z06 Headers are the only Corvette Headers that allow you to use you the Akrpaovic X pipe or stock H pipe without any modiifications. You will lose your catalytic converters as they come off with the stock OEM Headers (all one piece). If you live in an area that does not mandate cats, the B&B headers are the perfect compliment to the Akrapovic system and they are on sale to help make the decision easy.     Another complimental item that goes with the tips of the Akrapovic Exhaust is the APR Carbon Fiber Rear Diffuser (see below). Really looks awesome with the Carbon or Titanium Akrapovic tips.
  • C6 Corvette  Z06 Borla Catback Exhaust #140191

    C6 Corvette Z06 Borla Catback Exhaust #140191

    $1,899.99
    Free Shipping
    Quad Tip Round Angle Cut and Includes X-Pipe This is the "S" or Sport pipe so the sound is aggressive. Borla Performance Industries once again proves why they have led the aftermarket performance exhaust industry for over 26 years. This is the Covette C6 Z06 Borla "Stinger" system with the X Pipe. Agrressive exhaust note and appearance make the Borla system for the C6 Corvette Z06 a perfect combination. Please be aware, this is the C6 Z06 Stinger system and has a very aggressive muscle car sound. If you are looking for an awesome sounding exhaust system, this is the answer. Very aggressive, very deep muscle car sound. Warning, the wife or girlfriend will probably not like it. BORLA has an exalted heritage with Chevrolet performance vehicles. From the C5R LeMans winning Corvettes to privateers like KTEC, Pratt-Miller, Lingenfelter and Lou Gigliotti who have enhanced BORLA’s knowledge of both the vehicle dynamics and the power-plant engineering. The new C6 is a muscle car with a big powerful engine on a sophisticated, sexy chassis. BORLA has always used the transfer of technology from racing to the street as a tool, and the C5, C6 and Z06 play right into that wheelhouse. With an experienced R&D staff, the BORLA team has given the Chevrolet mark the attention it deserves by rolling out several new systems for the Corvette. Airflow management and exhaust engineering is a science with which BORLA has more experience than anyone in the exhaust aftermarket. Installed on your Corvette Z06 or ZR1 , you can expect a 10-12 HP gain right for the start. 12-15 hp when installed with the X-Pipe. BORLA is committed to providing world class exhaust products which surpass the expectations of our customers. To that end, our facility is complete with a state-of-the art test and development center where we are continually improving our manufacturing efficiency and standards. We have pioneered a variety of improvements in the design of performance exhaust systems. Alex Borla currently holds three US patents for innovative exhaust system technology, and the company has won numerous "Best New" product awards in the industry. Every BORLA header and Cat-Back system is made from T-304 stainless steel (superior to 409 or aluminized steel) employing mandrel-bent tubing, all-welded construction, and is designed for accurate fit and easy installation. Nearly 30 years experience and special merge collector technology provide the ultimate in power and endurance. The performance advantages of a BORLA are widely recognized. The top engine builders in the racing world rely on BORLA exhaust for maximum performance. In fact, BORLA is at the forefront of the movement toward responsible racing with our full line of patented, award and race-winning racing mufflers that not only maintain a race engine’s power, but in some instances actually add power. This technology is incorporated into BORLA exhaust for the street, providing 7-10% increased horsepower and torque when you plant your foot, and improved gas mileage at cruising speeds.
  • C6 Corvette  Exhaust Borla Stinger Cat-Back and X-Pipe 140128

    C6 Corvette Exhaust Borla Stinger Cat-Back and X-Pipe 140128

    $1,649.99
    Free Shipping
    Includes the X-Pipe!!! Please note this system will not fit on 2009+ cars..2009+ Borla Corvette Exhaust is here. Borla Performance Industries once again proves why they have led the aftermarket performance exhaust industry for over 26 years. This is the Covette C6 Borla "Stinger" system. Agrressive exhaust note and appearance make the Borla system for the C6 Corvette a perfect combination. Please note that this is the Sport1 system. Borla is discontinuing this system after completely revamping their sport exhaust in late 2011. The new Sport2 exhaust features the same powerful and aggressive tone of the S1 but with diminished cabin drone. This system will only remain on sale while supplies last. Available in three different Tip Styles: Quad Round Tip - #140128 Quad Oval Tip - 140131 Dual Rectangular Tip - 140133 This is the "S" or Sport pipe so the sound is aggressive. Our Part #140128 is a true dual Cat Back system employing now famous BORLA "S" Style race-bred 5" diameter straight through mufflers that feed two 4" round, rolled edge, angle cut tips on each outlet. Make no mistake, this is an aggressive exhaust, proclaiming loud and clear that 400+ horses are ready to stampede under this hood. #140128 is a full 14 pounds lighter than the stock system, includes the famous Borla X pipe (also sold separately as Part #60089) after the factory cats and flows a full 300cfm more than the factory system which, as most engine builders will confirm, accounts for the significant power improvements. Perhaps more importantly, this flow will also maximize other performance enhancements because each BORLA exhaust is tuned to get peak output from any aftermarket performance upgrade. Installed on your Corvette, you can expect a 10-12 HP gain right for the start. 12-15 hp when installed with the X Pipe. Weight Comparisons: Stock Cat-Back Exhaust (with h pipe)........58 Lbs. Borla S Type Cat Back (w with X pipe).......44 Lbs. Rear Sections Only Stock rear section.................................... 40 Lbs. Borla S Type rear section...........................29 Lbs. BORLA is committed to providing world class exhaust products which surpass the expectations of our customers. To that end, our facility is complete with a state-of-the art test and development center where we are continually improving our manufacturing efficiency and standards. We have pioneered a variety of improvements in the design of performance exhaust systems. Alex Borla currently holds three US patents for innovative exhaust system technology, and the company has won numerous "Best New" product awards in the industry. Every BORLA header and Cat-Back system is made from T-304 stainless steel (superior to 409 or aluminized steel) employing mandrel-bent tubing, all-welded construction, and is designed for accurate fit and easy installation. Nearly 30 years experience and special merge collector technology provide the ultimate in power and endurance. The performance advantages of a BORLA are widely recognized. The top engine builders in the racing world rely on BORLA exhaust for maximum performance. In fact, BORLA is at the forefront of the movement toward responsible racing with our full line of patented, award and race-winning racing mufflers that not only maintain a race engine’s power, but in some instances actually add power. This technology is incorporated into BORLA exhaust for the street, providing 7-10% increased horsepower and torque when you plant your foot, and improved gas mileage at cruising speeds.
  • C6 CORVETTE BILLY BOAT X-PIPE FCOR-0430

    C6 Corvette Billy Boat X-Pipe FCOR-0430

    Regular Price: $429.99

    Special Price $399.95

    Free Shipping
    Billy Boat X-Pipe for the C6 CorvettePlease note: This item is sold at our rock bottom price, the best price in the world and we cannot discount further. Looking at getting a new C6 Corvette Billy Boat Exhaust system? Do not forget the X-Pipe. The Billy Boat X-Pipe reduces turbulence in your exhaust system and allows for a free flowing system. The Billy Boat X Pipe will bolt right up to your OEM system or will connect up with most all aftermarket exhaust systems. The Billy Boat Corvette X pipe evens the exhaust pulses with a synchronized crossover in the center section, resulting in a deeper, smoother tone.   
  • C6 Corvette  Z06 Borla Exhaust Stinger 11761

    C6 Corvette Z06 Borla Exhaust Stinger 11761

    $1,397.99
    Free Shipping
    Borla Performance Industries once again proves why they have led the aftermarket performance exhaust industry for over 26 years. This is the Covette C6 Z06-ZR1 Borla "Stinger" system without the X Pipe. Based on the same "stinger" sound that made the C5 Z06 Borla system a defactop standard for Z06 owners around the workd, the C6 Z06 Borla system is sure to please. With it's famous agressive exhaust note and awesome appearance the Borla system and C6 Corvette Z06 are a match made in heaven. You can expect serious performance gains with this system along with an exhaust note that will turn heads wherever you go.  The exhaust tips are 4" Quad Tips with a beautiful round angle cut.   This is the "S" or Sport type so the sound is aggressive or otherwise known as the Stinger. BORLA has an exalted heritage with Chevrolet performance vehicles. From the C5R LeMans winning Corvettes to privateers like KTEC, Pratt-Miller, Lingenfelter and Lou Gigliotti who have enhanced BORLA's knowledge of both the vehicle dynamics and the power-plant engineering. The new C6 is a muscle car with a big powerful engine on a sophisticated, sexy chassis. BORLA has always used the transfer of technology from racing to the street as a tool, and the C5, C6 and Z06 play right into that wheelhouse. With an experienced R&D staff, the BORLA team has given the Chevrolet mark the attention it deserves by rolling out several new systems for the Corvette. Airflow management and exhaust engineering is a science with which BORLA has more experience than anyone in the exhaust aftermarket. Installed on your Corvette, you can expect a 10-12 HP gain right for the start. 12-15 hp when installed with the X-Pipe. BORLA is committed to providing world class exhaust products which surpass the expectations of our customers. To that end, our facility is complete with a state-of-the art test and development center where we are continually improving our manufacturing efficiency and standards. We have pioneered a variety of improvements in the design of performance exhaust systems. Alex Borla currently holds three US patents for innovative exhaust system technology, and the company has won numerous "Best New" product awards in the industry. Every BORLA header and Cat-Back system is made from T-304 stainless steel (superior to 409 or aluminized steel) employing mandrel-bent tubing, all-welded construction, and is designed for accurate fit and easy installation. Nearly 30 years experience and special merge collector technology provide the ultimate in power and endurance. The performance advantages of a BORLA are widely recognized. The top engine builders in the racing world rely on BORLA exhaust for maximum performance. In fact, BORLA is at the forefront of the movement toward responsible racing with our full line of patented, award and race-winning racing mufflers that not only maintain a race engine’s power, but in some instances actually add power. This technology is incorporated into BORLA exhaust for the street, providing 7-10% increased horsepower and torque when you plant your foot, and improved gas mileage at cruising speeds.
  • C6 Corvette  Z06 and ZR1 Billy Boat PRT Exhaust FCOR-0469 / FCOR-0470

    C6 Corvette Z06 and ZR1 Billy Boat PRT Exhaust FCOR-0469 / FCOR-0470

    $1,275.08
    Free Shipping
    Please note: This item is sold at our rock bottom price, the best price in the world and we cannot discount further.The Bullet is available with Round Tips and Oval Tips. Please make your selection:FCOR-0470 Round TipsFCOR-0469 Oval Tips This NEW Billy Boat Performance Exhaust PRT system for the Z06/ZR1 utilizes the latest in resonance control technology from B&B. We completely redesigned and re-engineered the PRT for the C6 and are using the same technology in this system. This simple in design, yet complex in theory, uses a straight through design muffler for a deep aggressive exhaust note when tearing up the streets while the unique purge chamber allows for a mild note at cruising speeds with no interior resonance. This exhaust system is available with either Quad Round or Quad Oval exhaust tips. Tips are available with your choice of polished Stainless Steel tips--which are finished to a gorgeous mirror like shine--, and new Black Satin Ceramic Coated Exhaust tips--for a more unique and aggressive modified appearance. Southern Car Parts was the Sponsor of the Chad Boat #84 Toyota for the Chicago race back in 2013.... We've got a great business relationship with Billy Boat Exhaust and Southern Car Parts knows the B&B Product line better than anyone in the business. We stock many C5, C6 and C7 exhaust systems.
  • C6 Corvette  Z06 Billy Boat X-Pipe FCOR-0432

    C6 Corvette Z06 Billy Boat X-Pipe FCOR-0432

    Regular Price: $619.00

    Special Price $615.00

    Free Shipping
    Please note: This item is sold at our rock bottom price, the best price in the world and we cannot discount further. Replace your stock Corvette Z06 or ZR1 H-Pipe with the Billy Boat Z06-ZR1 X-Pipe. If you are changing your exhaust system, you should also put in a new X pipe. The Billy Boat X Pipe reduces turbulence in your exhaust and smoothes out the exhaust note. The Billy Boat X-Pipe is compatible with your stock exhaust system or any other aftermarket exhaust system. The reason an X-Pipe crossover works better than an H-pipe crossover isn't because of more flow or volume, but more effective use of exhaust gas velocity. Exhaust gas (or air) has surface tension, and flows much like liquid would through the same pipe system. As the cylinders of each bank on a "V" style motor fire, they create a pulse in the system. The pulses will alternate back and forth, from bank to bank as the motor runs. With multiple cylinders, such as a V-8, the eight cylinders alternately fire creates lots of pulses in the system. If you put your hand behind the tailpipe, it would feel like a constant flow of air, but what it really is a lot of singular pulses giving the impression of constant flow. The idea behind the H and X style crossover is to unite the two banks of cylinders for better exhaust gas scavenging. Instead of two separate banks of four cylinders doing their own work, the crossover uses the pulse created by a firing cylinder of one bank to create a vacuum in the other bank because of surface tension. When a cylinder of the other bank is ready to fire, instead of the piston having to force the exhaust gas out of the cylinder, the vacuum that was created by the other cylinder bank helps suck the exhaust gas out of the cylinder, hence the term "scavenging." Whenever you can reduce the load on an internal combustion engine, you are likely going to see performance and efficiency benefits. The difference between an H and X crossover is a smoother path for the exhaust gas to follow. Exhaust gas, like a liquid, will follow a path with the least amount of resistance. An H crossover has a path with two sharp 90-degree angles that are close together. An X crossover has a path with a much more gradual bend to allow the exhaust gases to continue their path back out to the ends of the tailpipes, rather then turning sideways for a short distance, then turn again to head out the tailpipes. Smooth flow with high velocity means more power by use of scavenging. Using an exhaust system with too large of piping diameter work against scavenging in the same way that running an exhaust with too small of tubing chokes the motor and forces it to work harder to expel the exhaust gases. X pipe is available with or Without Catalytic converters. In most cases you will not need Cats on the X pipe unless you are adding B&B Headers and want to have Cats also.
  • C6 Corvette  Exhaust Borla Sport 11744

    C6 Corvette Exhaust Borla Sport 11744

    $1,171.99
    Free Shipping
    Borla C6 Rear Section system without X pipe. Fits all C6 Corvette 's (except the C6 Z06 and 2009+ models). For 2009+ Model Corvettes, use this Borla system, Borla 11766. The X-pipe not included nor is not needed to use this system but can be added later for additional hp. This is the aggressive sounding Sport system or otherwise known as the Stinger. If you are more interested in the Borla Touring system, click here... .Corvette Borla Touring Exhaust Free shipping for a limited time. BORLA engineers went right to work on the C6 Corvette as soon as they were available. We have put together the largest variety of options in the industry, and there’s more on the way. Cat-Back systems are available with the highly popular “S-Type” muffler and merge “X” pipe for those who like it on the wild side as well as with our “Touring” muffler for those who prefer it mild. Both come in an assortment of tip styles and can be purchased with or without an “X” pipe. Borla Performance Industries once again proves why we’ve led the aftermarket performance exhaust industry for over 26 years. BORLA has an exalted heritage with Chevrolet performance vehicles. From the C5R LeMans Winning Corvettes to privateers like KTEC, Pratt-Miller, Lingenfelter and Lou Gigliotti who have enhanced BORLA’s knowledge of both the vehicle dynamics and power-plant engineering. The new C6 is a muscle car with a big, powerful engine and sophisticated sexy chassis. BORLA has always used the transfer of technology from racing to the street as a tool, and the C6 plays right into that wheelhouse. With an experienced R&D staff, the BORLA team gave the Chevrolet mark the attention it deserves, rolling out several new system options. Airflow management and exhaust engineering is a science with which BORLA has more experience than anyone in the exhaust aftermarket.   Weight Comparisons: Stock Cat-Back Exhaust (with h-pipe)…………………..…58 Lbs. Borla S Type Cat-Back (with X-pipe)……………44 Lbs. Rear Sections Only Stock rear section…………………………….. 40 Lbs. Borla S Type rear section……………..……….29 Lbs. We saw a 10-15 hp gain with our S-Type rear section and a few more with our X-pipe. The full S-Type Cat-Back system with the X-pipe should consistently get 12-15hp on a stock C6 but can also get 18+ hp depending on the conditions. Please note a number of variables affect the horsepower delta with dynomometers . Borla Performance Industries, the original pioneers of aerospace-grade T-304 stainless steel (superior to 409 or aluminized steel) free-flow exhaust utilizes patented award and race winning technology to deliver quality, sound, performance gains and enhanced fuel economy — all with an easy bolt-on installation. All BORLA street products carry an unsurpassed written million-mile warranty. Borla offers a variety of options for the C5, C6 and Z06. Choose from several tip styles and muffler designs. Cat-Backs and Rear Sections are available with either the highly popular “S-Type” muffler or the “Touring” muffler.  The “S-Type” is a smaller, round muffler with a center-in/center-out configuration giving a more aggressive sound and higher flow.  For those who prefer it on the milder side, we have the “Touring” muffler -- a larger case producing less aggressive sound.  Some come with an assortment of tip designs.   
  • C6 Corvette  Z06 American Racing Headers

    C6 Corvette Z06 American Racing Headers

    $1,876.45
    Free Shipping
    With race inspired technology built into every system, you're looking at the very best the performance exhaust industry has to offer. Our American Racing C6 Corvette systems are available with 1-7/8" or 2" primaries and your choice of 3" x 3" Catted or non Catted X-pipe systems. Of course our Corvette Systems  are manufactured using the highest quality 304 S/S available and require no modifications to install. All systems come standard with merge collectors with scavenger spikes. We also use the highest quality and best flowing metallic substrate catalytic converters available and all systems assemble with Grade 8 hardware and HD S/S band clamps. A complete header package will require a proper tune, but with said tune can provide more than 50 extra HP across the RPM range for your Corvette. The 2" Primary system is only recommended for use on a highly modified Corvette. For most stock or standard modified Z06 Corvettes, the 1 7/8" system is ideal for your application.       Please select your header options from the drop-down menus below so that we can assure you get exactly the Long Tube header system you need.
  • C6 Corvette  Z06 and ZR1 Borla ATAK Exhaust System 140422

    C6 Corvette Z06 and ZR1 Borla ATAK Exhaust System 140422

    $1,999.99
    Free Shipping
    C6 Corvette Z06 and ZR1 Borla ATAK Exhaust System 140422

1-48 of 95

Page:
  1. 1
  2. 2

Grid List

Set Descending Direction